Google and ICal issues since Safari upgrade

After we recently upgraded Safari, when I add an event to my google calendar or to my ical, which are synced, it shows up twice on the ical calendar. This only happens for my events--no one else's in our family. I am the main person on the account. Also, we are not able to see Google Calendar on safari since we upgraded.

I am trying to publish my google calendar of events onto my web page. In Firefox the calendar displays and all events show up fine. However, in Safari, my google calendar shows up but none of the events are displayed. I have checked & double checked that the sharing settings are correct in google calendars!! I've even made sure to empty all cashes Can anyone help me understand why it works in Firefox but not with Safari??

Similar Messages

Safari and Facebook issues since Yosemite upgrade

OSX 10.10
Safari 8.0
Macbook Pro Retina Late 2013
Since upgrading to Yosemite, I have been having numerous issues on Safari with Facebook, but not on any other website. The issues are:
- Sometimes (maybe 10% of the time) only loads a few posts in my timeline (as few as 4) and then stops
- Sometimes (maybe 50% of the time) a few pictures are not displayed, but only a little question mark
- Sometimes (about 10% of the time) I cannot click any of the links
- Sometimes (about 20%) I get a Failed to Open Page screen with the message Safari cannot establish a secure connection.
I have tried the following:
- Turned off any extensions
- Cleared the History and Cache (as well as moving the cache.db file for Safari into Trash and then restarting Safari)
Neither of these seemed to have any effect. Any ideas what to do next?
If I delete Safari and re-install, is there some way to keep all my bookmarks?

Hi ..
If you delete Safari on a Mac running Yosemite v10.10, there are no standalone downloads to reinstall the app. You would have to restore OS X using OS X Recovery. Better to troubleshoot the currently installed Safari app.
Try OpenDNS.
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit then relaunch Safari to test.
f that doesn't help, try Google's DNS > Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

I would restore with backup and if that doesn't fix it try as new
http://support.apple.com/kb/HT4137

Video and webpage issues since upgrade to Mountain Lion.

I recently installed OSX 10.8(as an upgrade) on Macbook Pro(circa2008) with 2.5 Intel Core Duo processor and 4 gigs of RAM. It had 10.6 on it. Since the upgrade ,video has shown blue squigly lines while playing and web pages show squigly yellow ones. The screengrab is playing a file in quicktime over a Chrome (Safari has same issue) showing yellow lines. The blue lines are there when watching Youtube video as well as while working in iMovie. It does not affect the qualityof video when uploaded. No issues with Jpegs or text files. Only videos and webpages. I'm baffled.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp980#DriversAndSoftware.

IPad AirPlay issues since IOS7 upgrade

Hi all
Since the last ios7 upgrade i've had nothing but trouble with my AirPlay set up.
I have the following set up:
HP ProLiant N40L server running iTune server (latest build)
BT HomeHub 3 / TP Link TL-PA211 WiFi extender
iPad 3rd geneeration
iHome iW1 AirPlay speaker
Before the upgrade i would get some intermittent issues, but eventually after iPad restarts i could get AirPlay working. Since the upgrade 90% of the time my iPad will not see any AirPlay devices whatseover. After a reboot of the iPad (or more) it eventually sees the Airplay speaker. iTunes however on my server always sees the AirPlay device and has no problems whatsoever connecitng to it (please bear in mind that this is still on the same WiFi network).
On the occassional 10% that my iPad does see an AirPlay device, I connect, and then almost immediately the AirPlay device dissappears from the iPad.
I've spent 2 weeks now trying to sort the issue out. As my iTunes can see the AirPlay speaker without issues and play to it, I'm assuming it's part of the ios update.
Anyone got any suggestions, as i'm ready to throw in the towel?
Thanks
Simon

Hi
First, before you lose interest - I have a solution that works so well to get BT Home Hub 3 working with 'Airplay' and Apple TV and my iPad 4, that I am so far unable to 'break' it. Please do try to break it yourself, and could you report back here or mark it with stars or whatever so I know what happened in someone else's setup?
I appreciate what you are going through, all I wanted to do was get 'Real Racing 3' running for me and the kidz on the TV that is attached to Apple TV box. Sometimes the Airplay icon appeared, sometimes not, it was chance - really frustrating.
The nub of it is this - you 'reserve' certain aspects of how the HH3 services the wifi network, so it directs data/communications via these 'reserved' ports specifically assigning them to the purpose you need - in this case, 'stuff' (technical eh?) going to the Apple TV so that Airplay works.
Apple forums somewhere list these publicised ports, and you go into HH3 management (tap in the IP address of the hub in 'safari' to get there, then put in your password for admin - it is 'admin' if you didn't change it already). In short, you use one of the games/applications that already are in the list for 'Port Forwarding', and I modified the name of a new one I made to make it like 'Airplay attempt using BT alarm' or something, because I 'copied' the BT safe alarm app details to start my custom one off. Lost yet?! Go into the HH3 manager, go to the A-Z I think it might be in 'advanced' and get 'Port Forwarding' up.
Ok, here's the things to set - if you peruse the apps/games they already list in HH3 for this sort of thing, you will see entries under 'TCP' or 'UDP' headings, and it's these sort of things we want to reserve. I only set the single specific addresses (it's just a number to you and me) that were listed on the Apple site as being to do with Airplay:
There are only 2 bits to set - you hit the button on screen in HH3 manager, to 'add entry', then select in the box marked 'protocol' that you want TCP or UDP according to the info I dug up from Apple site below - don't worry it is not complex to do you are just editing a couple of figures on a thing you don't use. Incidentally, I left the first two entries as they were (1024 was in there already) because I am just timid! So set it as below.
TCP 1024 -
UDP 1024 -
TCP 80 80
Any 123 123
TCP 443 443
Any 554 554
TCP 3689 3689
UDP 5353 5353
I took a pic of mine, for records, and this is what is in that pic. You have to enter the self-same number (eg 123 as above) no less than 4 times, this gives the results above.
On the bottom right, there is a button that says 'apply', so you hit that and it saves this new-fangled custom designed list of reserved ports/addresses for your 'Airplay BT alarm' or whatever you called it. THEN YOU MUST ASSIGN THIS CREATION OF YOURS TO A DEVICE - THE APPLE TV.
That's the basics of what I did - I have since restarted the BT HOMEHUB 3 several times, the Ipad 4 several times, the Apple TV has updated its software and has been restarted twice. STILL AIRPLAY WORKS.
So, I am reassuringly presented with the Airplay icon whenever I 'upswipe' on my ipad from the bottom of the screen - iOS 7.1 is on my ipad obviously, but that did not change the hit-and-miss of the Airplay icon until I made these mods to the HH3.
Over to you - try and break my solution please, and let me know if it works for you as well, or not. All I know is, Real Racing 3 can reliably be brought to bear on the Apple TV thing, and the Airplay icon is now never missing.
One more point - I think I also set the Apple TV IP address to be static - my ipad has had this situation for some time, along with the 'lease' set to a couple of weeks or something, so it does not try to select a different channel for wifi frequently? PLUS, I set something in the ipad I think, long ago (did not affect this issue as far as I can see), so that when the ipad 'wakes up' it does not decide to search for a better channel or IP address or something - that caused loads of glitches it seemed, then I found out my BT HH3 was on the end of dodgy phone cable not hi-quality shielded...but hey, that's a different bucket of bolts.
Good luck and let me know an outcome please, best to all.

Purple route line in Google Maps continually disappears since iOS4 upgrade

Since upgrading to iOS4, I've noticed that the purple route line in Google Maps disappears while I'm following a route. I'm not to the destination but suddenly the purple line is gone. Touching the screen usually restores the route. Anyone else have this problem? Suggestions to correct it? I had it in both 4.0 and 4.0.1. Where can I report this? I'll post this a MacRumor with a few pics.

I am having the same problem, and it happened when I upgraded to 4. Just bought a new iPhone 4 (currently running 4.2) and still the same problem.

Email and Photo issue since update

Ever since the 2.2 firmware update the images I email from my 3g iphone are displaying very low res on my wife's phone and vice versa. She emailed me some photos that looked fine before the update and now they are all pixelated. Has anyone else had this issue since the update?

This is a known bug and the subject of a big thread here:
http://discussions.apple.com/thread.jspa?threadID=1802430&tstart=45
There is not much you can do about it other than hope for an upgraded firmware release.
The photos are stored on the phone in the proper resolution, and you can copy them to your computer and they look fine.

FaceTime issues since iOS upgrade

Held ever since the "upgrade" face time has frequent poor connection. And loses connection constantly, previously this was fine, when is this be sorted is a real upgrade due shortly?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
You may be losing wifi connection.
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My firefox keep crashing and freezing ever since i upgraded

Hello,
Ever since i upgraded to firefox 6 it keep freezing and crashing about every 10 to 20 mins.
It does not matter what website i am on it just keeps doing it.
I have no addons and no themes.
I hope someone can fix my problem as i am thinking very hard to move to a different browser.
I have internet explora on my laptop and it dont freeze and dont crash.
I love firefox but i want this issue fixed.
Many thanks
christian

Yeah same here. I dont know why it keep happening but its not fair and its really getting on my nervers. If it keeps happing i might change my browser i dont want to as i like firefox but if it does keep happening and no one fixs this then bye firefox.

Fed up with speed and connection issues since exch...

Last Monday BT done some upgrade work at our local exchange. From that point onwards we have had speed and connection issues.
I use a Belkin G Router rather that the Homehub some that we can run a printer through it and that is plugged in to telephone socket via an extension. But before we blame any of that we have gone back to the Homehub2 so we could see the difference and there is very little.
We live in the countrside so broadband speeds are not great in any case. About 1.8 mg I guess but we have always had no problems. It was good enough for us and we could watch Iplayer.
I was getting fed up with drop outs and speed and yestereday an Openreach guy came out tested everything could not find any problems apart from speed. He made some calls and was told our band width had been capped. He had that removed and yesterday evening speed was a bit better.
Today just as bad again.
Details from router:
Date/Time          January 25 2012 , 21 : 14 : 25
Version Info
Runtime Code version F5D7633-4Av1_UK_1.00.009
Boot Code Version          1.0.37-5.15
Hardware Version           V1.0J3
ADSL Modem Code Version        A2pB015c6
ADSL
Type
Status   No Defect
                Downstream      Upstream
Data rate             287         440
Noise margin     32.3        18.6
Output power   14.8        12.7
Attenuation       58.5      28.9
Figures from speedtester BT
Download speed: 180 Kps
acceptable range speeds is 100 - 250 Kps
DSL Connection rate 286 Kps (DOWN_STREAM) 440Kps (UP_STREAM)
Upstream Test
Upload Speed 346 kps
Upstream Profile 440Kps
Any help would be appreciated
Solved!
Go to Solution.

Hi Welcome to the forums
Your high noise margin will have a major impact on your speed
If you post the full stats from your router
For homehub – type 192.168.1.254 into your browser
Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
Click on More Details and then post the full results.
also post the full results from http://speedtester.bt.com/
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
Then someone here may be able to help and offer more advice.
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Various issues since Leopard upgrade

I have just installed Leopard on a Dual 2.7 G5 with a 500GB Hitachi HDD and 5GB RAM and I have noticed one or two niggling little 'quirks' (I am lumping everything together here, rather than separating them in to more appropriate sections, so that I have a record of everything together).
1) I have an Epson Perfection 4870 scanner which I cannot use to scan directly from applications (for quickness I mainly use Preview) as the 'scan' button is always unavailable (greyed out, not highlighted in blue). This has been an issue since at least 10.4.8, so it's not a problem exclusive to Leopard, but it's extremely annoying nonetheless. As I can scan directly from the Epson Scan software (which is basically the driver) Epson will not assist me further and have directed me to Apple/Adobe/MS, etc., for support. Prior to 10.4.8 (IIRC) I could select 'import' (from whatever application) and it would automatically preview, the scan button would then become available and hitting it would launch the driver software. However, the link between the applications and the driver seems to have been severed somehow/somewhere and it is no longer recognising that the unit has finished its preview in order to make the 'scan' button available for the next part of the process.
In Tiger, I could also scan into Epson's EasyScan application, but have been told this isn't 10.5 compatible.
Does the above make sense...? Has anyone else experienced this - and have you solved it? If so, how?
2) This next bit concerns the Dock. I like to have it hidden along the left hand side of the screen, rather than at the bottom, because I only have a 17" panel and desktop space is at a premium. However, about one restart in five, it's back along the bottom and any icons or folders that I have added to it have gone AWOL.
3) The third issue is a sound issue. I have a Revolution 7.1 card which I understand, from reading a notice on M-Audio's Web site, is not yet Leopard compatible (though the promise it will be "very soon"' though as the last driver release didn't support anything newer than 10.4.6, IIRC, I'm not holding my breath!)
So I have removed the card and plugged my Logitech Z5500s back into the 'on board' card. This was working flawlessly under Tiger (I know because I tested it to make sure, because I knew that the Revolution wouldn't function under Leopard). However, whatever I try, I only seem to hear sound from the internal speaker; I even replaced the optical cable (at great expense - the original was a Belkin Gold Series, and so is the replacement and, at about £35 a pop, it's not a trivial outlay). Everything in the sound sys prefs is completely 'greyed out' so I cannot change it from the internal speaker to anything else. Whilst there is nothing on Logitech's Web site as regards to the Leopard compatibility of any of its products (it seems that it gave up on the Mac a very long time ago; I use a MX510 which was the last of their rodents to have any kind of OS X support and that stopped with 10.4.4, IIRC) I cannot see how a set of speakers, which should work with anything that has the required jack sockets, can be fussy about an OS. Incidentally, I also have a 'dark side' box running XP Home (when I win the lottery, I'll buy a Mac Pro and dispense with it) and they're plugged in there and work fine (via analogue, though, not digital).
I noticed it when I received some CDs that I'd ordered from Amazon the other day and found that iTunes was playing through the internal speaker.
4) The final issue is a networking issue. Under Tiger, I could (though it did take me some tweaking to get it working smoothly) dump things from the G5 on to the Windoze box and vice versa, without too many hiccups. However, Leopard is proving to be somewhat of a challenge, to say the least. I don't know how I managed it, but I did manage to render the machine completely inoperable at one point (it would only boot as far as the grey 'Apple logo' screen and I couldn't open the optical drive to stick the DVD in - a panicked phone call to a friend, who runs his own Mac repair and consultancy business, followed!
I don't understand SMB and AFP (though I do know about FTP). In the Finder, I can see the 'doze box and can send things to it (though should I be connected as 'guest'?) but there is nothing on the Windoze side, save for 'Printers and Faxes'). I have made sure I have permissions set correctly and everything is set up to share (and Windows sharing is on) but there is nothing on the other box at all.
Is it possible to share the main HDD across, or am I limited to this silly 'Drop Box' thing (which I did have available under 'doze at one point, though it was read only and I couldn't change permissions from Leopard because I didn't have sufficient privileges, even though I have an admin account and I could change permissions under Tiger with the same level of 'clearance'.)
4) This final issue is sort of linked with 3) as it concerns what I believe to be erroneous error messages. I was clearing some stuff off a drive I was going to use for Time Machine[1], but I wasn't allowed to delete most of it because 'XYZ was in use' or open in an application. Six reboots later, I was still receiving the same error; strikes me that Leopard's got its knickers in a knot somewhere along the line because the files in question (mainly old Word and Excel docs) were certainly NOT in use as I didn't have either installed at the time!
[1]Though having read the problems people are having with TM (not just here, but on other forums I read/post to) I think I might give it a miss and stick with ChronoSync (just have to wait for it to be compatible).
So, this is actually the second installation, but the problems remain - any help out there?
Sorry for the verboseness of this, but I wanted to make sure that I'd covered everything. I'm almost tempted to reinstall Tigger (but not quite - I like Spaces, and I like the Dock Preview).
Cheers for any assistance, folks!
Fran

Fran, I'm not sure I'm going to be much help for all your problems but I will attempt to answer what I can.
1. Scanner problems - have you tried reinstalling the software? I know you mentioned that the easyscan software is not compatible but it sounds like the driver software isn't in the right place. Optionally another program that you might want to look into is vuescan. I have had good success with the program in the past but I have yet to try it under Leopard.
2. Dock problems this sounds like either a corrupted preference list. But I don't have a clue as to why it might be reoccurring. Have you fixed permissions on your computer since installation?
3. I don't have a clue to figure out how to fix this issue.
4. Networking - As for sending things to the doze box. You don't need to be connected as guest. Just use the username and password that you use when you sign into the windows to sign into the windows box and you should have the same rights as you would as if you were using windows on that computer. Yes it is possible to share the main HDD but it isn't something that I would recommend. What I do recommend is creating a folder where you have both read and write rights to and then use that folder share items across both computers. If this isn't something that is going to work for then at the most I would just share your documents folder. You didn't mention how your trying view information on the windows side you should be able to browse your network and eventually find and see the mac.
4 (part 2) - I would recommend something besides TM, it is designed to recover lost/accidentally deleted files. And isn't really designed for being your complete backup program. Yes, you can use it for that but I would recommend something more robust. Some of that comes down to how you want to define your recovery strategy. Superduper!, promotes themselves as having the ability to boot for your backup drive and being able to almost immediately get back in business. If this is a critical factor to you then I would lean in that direction. If you are just worried about having a backup of critical data files then Chronosync or some other program will work just as well. Also mentioned in your post in this paragraph is a description of "files in use" problems. A couple of things come to mind did you let spotlight finish indexing your drive before you tried deleting files? I've run into a problem similar to this in Tiger when I was deleting files while spotlight was indexing.
One item that you didn't mention was what kind of installation you did when you installed Leopard. If you didn't do an 'erase and install" then that might be something to look into. First back up your computer before doing this. You might also want to run a permissions fix on your drive to see if that helps at all.
HTH
Paul

TS3230 Why aren't Google and Yahoo loading in Safari with Maverics? After several failed attempts, a "wireless diagnostics" zipped folder appeared on my desktop. I'm using a macbook pro with OSX 10.9.2

I updated to Maverics and now yahoo and google do not load in Safari - i get a "connot connect to server" warning. other websites load just fine.
Also, after several attempts to access the aforementioned sites, a zipped file/folder appeared on my desktop titled "WirelessDiagnostics"
What in the world is going on here? I attached a screenshot of the zip file.

Double-click anywhere in the line of text below on this page to select it, then copy it to the Clipboard by pressing the key combination command-C:
www.google.com
Launch the Network Utility application.
Step 1
Select the Lookup tab and paste into the address field (command-V). Press return. Post the output that appears below – the text, please, not a screenshot.
Step 2
Select the Ping tab and do the same. Please enter the same input as you did in Step 1. Don't use the output of Step 1 as input to Step 2.
Important Note
Some web browsers and mail clients will automatically convert a domain name such as "www.example.com" to a clickable URL, such as http://www.example.com. That will interfere with the test. If necessary, edit the input in the Network Utility window to remove any added characters.

Conect my iTouch to my iMac and open iPhoto since i upgraded to 2.0

Since I upgraded my iTouch to 2.0 firmware when I connect my device to the iMac, iPhoto aplication open automatically.
Never hapenned, do you how can i fix it?
Message was edited by: Grimaldo

FYI, v2.0 allows you to take screenshots (by a quick, simultaneous press of the home and sleep/wake buttons), and to save pictures from email attachments and web pages (press and hold on the pic). These go into a Saved Pictures folder in your Photos, and can be synced up to iPhoto (which is why it automatically launches).
If you want to stop iPhoto from autolaunching, go to Applications > Image Capture > Image Capture menu > Preferences > General tab, and set the "When a camera is connected..." pop-up menu to No Application. I think with iLife '08, there is a similar setting in iPhoto preferences, but I know with iLife '06 you must use Image Capture to control this behavior.
Hope this helps...

Calendars :Google and Ical

HOw do I get Google calendar and ical on my Fascinate. I registered Google calendar on my computer with an authorization code but it does not show up on my phone.Also is there a way to make my phone "discoverable" for my apple computer to sycnh ical with my mobile device. Ical says my mobile is not "discoverable ", even though I have the bluetooth turned on

o set up CalDAV support for Google Calendar in Apple's iCal, follow these steps:
Open Apple iCal, go to Preferences and then the Accounts tab.
Click on the + button to add an account.
In the box that pops up, enter a description for the account and your Google Account username and password.
Under Server Options, add the following URL:
https://www.google.com/calendar/dav/[email protected]/user
Replace '[email protected]' with the email address that you use to log in to Calendar. Make sure to include the '@domain.com' portion (which is @gmail.com for Gmail users) in this section.
DO NOT substitute your username for 'user' at the end of the URL.
Leave the Use Kerberos v5 for authentication option unchecked.
Click Add.
Under the Delegation tab, select the calendars you'd like to add to iCal by checking the boxes next to them. You may need to hit refresh to get the latest list of calendars.
Add your email address to your Address Book card by selecting Add Email. You'll be prompted to add your email address only if your address is not already in your Address Book.
You won't be able to invite or email guests to Google Calendar events within iCal if your address is not in your Address Book.
Your Google Calendar will now appear in iCal's list of calendars, and changes you make to your Google Calendar in iCal will be reflected when you sign in to Google Calendar.
Event information will automatically refresh every five minutes. You can change this interval by opening the iCal > Preferences > Accounts menu and selecting a new refresh interval under the 'Refresh calendars' drop-down. Keep in mind you can also force a refresh by selecting a calendar and pressing the Appleand R keys at the same time.
Calendars that are checked but disabled have already been added to iCal - you

Anyone struggling with gestures and font issuer since upgrading to Lion?

I am really frustrated since "uprgrading " to Lion!! I no longer have pinch and zoom functions except in safari!
wont work in any other program, including my desktop! I have tried resetting trackpad, restarting-- any other suggestions?
I also can't adjust the font size anymore? In mail I can only adjust the side bar to small or large? No controls over font in address book.
Am I missing a setting?

Hi,
Have you disable the adobe flash accerlator? or how about your wifi setting? is it a WPA? If yes, changed to WEP.
Try
Johnson mok

Google and ICal issues since Safari upgrade

Similar Messages

Maybe you are looking for