Google calendar events disappear

I have been synching all of my Apple devices (iMac, MacBook, iPad, iPod Touch) using Mobil Me. I use gmail and Google calendar for all my events. Never had a problem until today. Every time I add an event to my Google calendar in iCal, the event disappears when iCal refreshes on my iMac. Other devices retain all the events. I have set up Google Calendar in iCal using CalDAV following the instructions and it has worked in the past. What's happening?

I was having mysterious issues with my iPhone iCal today. I too use gmail calendars as my hub because it is central to my work place. I have used CDAV in the past with no issues. So what I just did successfully was to delete my gmail account from the iPhone accounts preference, made sure that my MobileMe calendar was OFF, and reaccessed only the gmail account with the calendar only setting (as my work gmail is accessed by a separate account). This worked fine. In a few minutes all of my CDAV calendars loaded correctly and I'm back in business.

Similar Messages

  • Google calendar event times are shown as -1h

    Summary:
    When I create a new event in the built in WP8 calendar app to a Google calendar the time of the event is being displayed as one hour earlier.
    Steps to reproduce:
    Create a new event in calendar. Choose one of the Google calendars configured (I have two configured in my phone). Set time as 2013/07/17 16:00. Save the event.
    Expected behavior:
    The event time in the agenda view is shown as 2013/07/17 16:00.
    Observed behavior:
    The event time in the agenda view is shown as 2013/07/17 16:00 for a few seconds. It then automatically changes to 2013/07/17 15:00.
    Other notes:
    I have two Google calendars configured. I can observe the same misbehavior on both.
    I also have a Microsoft (@hotmail.com) calendar configured. This works as expected.
    When I log into my Google calendar using a web browser, the time is shown as expected.
    When I use a third party calendar (Chronos) and sync my Google account directly, the time is shown as expected.
    When I use a third party calendar (Chronos) and use it simply as an interface to the built in WP calendar the time is off again showing 2013/07/17 15:00.
    The timezone on my WP is set to (UTC) London.
    I started noticing this perhaps a week ago. It was working as expected before.
    Phone model is Nokia Lumia 925
    Phone OS version is 8.0.10327.77
    Notes 1-6 suggests to me that the internal calendaring module in WP8 fails to recognize DST (daylight saving time) in timezone (UTC) London or misinterprets relevant information fields on Google calendar objects.
    Note 7 suggests to me that this is related to an update to my WP8 phone or a change in Google calendar API.
    Any help is much appreciated, this is driving me rather nuts.
    Thanks,
    Kaarel

    Further investigation reveals this only happens when the event is created from within WP native calendar app and disappears when I make an edit to the event in any other calendar client including Google web. So a more appropriate description of the problem would be:
    "Native calendar app keeps subtracting 1h off a Google calendar event on EVERY edit"
    Create an event at 2013/07/17 15:00 in WP native calendar app. Result: Event shows as 2013/07/17 15:00 in the calendar app for a few seconds, then updates itself to 2013/07/17 14:00.
    Edit the event title and save in WP native calendar app. Event time moves by -1h again to 2013/07/17 13:00.
    Edit the event title in Google web calendar.
    Subsequent edits in WP native calendar do not mess up the time any longer. If I fix the time to what I originally intended (2013/07/17 15:00) in WP native calendar app, it stays there and shows correctly in all previously mentioned calendar viewers.
    I just learned that Lumia 925 was released with GDR2 update pre-installed. This update is only now being made generally available. If the issue is secific to the CalDAV implementation in GDR2 rather than specific to my phone only, this would make a lot of angry people. I hope I'm wrong on this though as it's an extremely frustrating problem.

  • When a third party program creates a new Google calendar event using a http link I cannot click the save button in Firefox 9.01 or 10b2.

    I use a TV listings program called DigiGuide. This has a script that opens a new Google Calendar event page in my browser for a specified TV program with all fields already completed. I then just have to click the SAVE button on the Google Calendar site to save the event - but since updating to 9.01 from 8.xx this button and others (Discard, Search) has no effect, although the cursor changes when over the button as if it recognised a link. Opening the same page in Chrome works fine. I have also noticed that Calendar's other buttons (e.g. next/previous period) can stop working on the main Calendar page, which I have as a pinned tab - in this event navigating away from Calendar and back again regains that functionality. The issue persists in Firefox 10b2.

    Further investigation reveals this only happens when the event is created from within WP native calendar app and disappears when I make an edit to the event in any other calendar client including Google web. So a more appropriate description of the problem would be:
    "Native calendar app keeps subtracting 1h off a Google calendar event on EVERY edit"
    Create an event at 2013/07/17 15:00 in WP native calendar app. Result: Event shows as 2013/07/17 15:00 in the calendar app for a few seconds, then updates itself to 2013/07/17 14:00.
    Edit the event title and save in WP native calendar app. Event time moves by -1h again to 2013/07/17 13:00.
    Edit the event title in Google web calendar.
    Subsequent edits in WP native calendar do not mess up the time any longer. If I fix the time to what I originally intended (2013/07/17 15:00) in WP native calendar app, it stays there and shows correctly in all previously mentioned calendar viewers.
    I just learned that Lumia 925 was released with GDR2 update pre-installed. This update is only now being made generally available. If the issue is secific to the CalDAV implementation in GDR2 rather than specific to my phone only, this would make a lot of angry people. I hope I'm wrong on this though as it's an extremely frustrating problem.

  • Bug: Repeating Google Calendar Events Show Up On The Wrong Days

    I've created a Google Calendar event that repeats "Daily," every two days, from 6:00pm to 6:30pm. It shows up fine in my Google Calendar, but the Pre's Calendar puts them on the wrong days. For example, the repeating event that should be scheduled for today shows up tomorrow (offset by +1 day). 
    I tried turning off network timezones, but the bug remains.
    Any help would be greatly appreciated. If this is a bug, how can I submit it to Palm?
    Thanks! 
    Post relates to: Pre p100eww (Sprint)
    Some new data:
    If I create the repeating event on my Pre, rather than via Google, it shows up on the Pre correctly. However, it only shows up for one day via Google (today); the event is not repeated. When I edit the event in Google, it's setup correctly. I tried saving the event from there, but it doesn't cause Google to recognize it should repeat.
    Very frustrating.
    Even more new data:
    Created yet another event via my Pre instead of via Google. This time Google picked up the correct repeat pattern, and my Pre now shows it on the correct days.
    Calendar sync needs serious work, based on my experience. I have issues with Facebook events showing up an hour later than they should, too. Dunno if this has been fixed yet.
    New Data (01/28/2010)
    Not sure why, but the above success reverted back to being off by one day; temporary success only.
    Message Edited by tlpbsd on 01-28-2010 11:52 AM
    This question was solved.
    View Solution.

    Hi, another quick question: you say you turned off network timezones.... did you make sure that the (now manually set) timezone is correct?
    Sounds similar to other issues related to the timezone being off, but usually the appointments were off by hours... not day(s).  However if your timezone is set to something really odd and the event you're creating is around midnight (again depends on a few things here), then MAYBE this is it.
    If it isn't, one of the support guys will have to chat with you privately about possibly collecting logs, getting more granular details, etc.

  • My contacts and calendar events disappeared from my iPad! How can I retrieve them??

    My contacts and calendar events disappeared from my iPad. Can they be retrieved?

    From
    http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=B786F9DEB73FE BE22A4D2F911A97BC3C?externalId=KB35311&sliceId=2&cmd=displayKC&docType=kc&noCoun t=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl
    BlackBerry Desktop Software utilizes Apple's SyncServices technology in order to synchronize Contact, Calendar, Notes, and Tasks information to and from the Mac computer.
    BlackBerry Desktop Software synchronizes information with the SyncServices database, which is synchronized with the desktop applications on the Mac computer (for example: Apple Address Book, iCal, Apple Mail, Microsoft Outlook for Mac). BlackBerry Desktop Software does not synchronize directly to or from the desktop applications on the Mac computer.
    Mac OS X Mavericks v10.9 and later does not use SyncServices, therefore, it is not possible to synchronize Contact or Calendar information using the BlackBerry Desktop Software on these versions of OS X.
    For more information on SyncServices and OS X Mavericks, see the following Apple Support article:
    http://support.apple.com/kb/HT5847
    Note: BlackBerry Desktop software 2.4 is still supported for use with Mac OS X v10.6, 10.7, and 10.8.
    Pete

  • Calendar disappeared! Last week I updated to IOS7. Today as the clocks ticked over in Australia to 2014 my contacts and calendar events disappeared. Help!

    Please help. With the beginning of 2014, my calendar events disappeared. I turned the iPad off, the. On again and repeat events reappeared, but all once off events/ appointments are gone! Everything was there before midnight, but I discovered around 2am, 1.1.14 that everything was gone. Bug? Help! Please.

    Are your contacts stored in an MS Exchange server, in iCloud, or some other source? Setting the Sync to less than All Events should not delete events, but only stop showing them on your device. However, Outlook also has a setting to actually delete events older than a certain date. Have you checked that?
    If you log in to iCloud.com (and you are syncing with iCloud) what do you see? Whatever is there is all you can get on the iPhone, unless you can restore from another source.
    I also suggest enabling iCloud Backup (settings/icloud - Storage and Backup). This will create a new backup any time your phone is connected to power and WiFi, so you will always have a current backup, painlessly.

  • Archive old Google Calendar events from iCal 4?

    I have 8 Google calendars filled with events going back years. It's too big and I want to thin it out by archiving all events older than two years. I'll do it manually, but I can't find a way that works. I haven't found any way within Google to do it and to do it manually from within Google, you have to select each event separately. Too much work.
    To do it for a Mobile Me calendar, I can just:
    - Create a corresponding archive calendar (ie, Archive Personal for my Personal calendar) that is On My Mac
    - Select only one calendar to view (Personal)
    - List all events by typing a period in the search bar
    - Select all events in the list that I want to move
    - Right click or control click one of those selected events in the calendar (not the list) and choose the calendar Archive Personal to move it to
    For the Mobile Me calendar, the events are moved to the Archive Personal calendar and removed from the Mobile Me calendar. Perfect.
    When I try that with a Google calendar, it all seems to work in iCal, but the event remains on the Google calendar. No good.
    I tried another way...
    - I exported one of the calendars from Google into an Archive calendar On My Mac
    - I was planning to delete everything after a certain date on the Archive calendar and delete everything before a certain date on the Google calendar, but when you search for all of the events in the Archive calendar On My Mac, it shows duplicates of every event. Somehow it's showing the Google calendar events as well as the archive calendar events even though the archive is the only calendar selected. The search should only result in events from that calendar!
    Also, searching for a list of all events in a calendar in iCal 4.04 doesn't work too well. Once you move events, the update of the list is spotty. To really see what is left in the calendar, you need to quit iCal and restart it and do the search over again. Hopefully that's fixed in the Lion version!
    If anyone can think of a solution to accomplish this — any better way to archive off old events from a Google calendar, I would appreciate it!

    I just started using MobileMe yesterday and have a similar issue. The only past events in my iPhone are recurring events like birthdays. None of my old one-time events synced to the iPhone. Fortunately, they're all still in iCal (local and online). Does anyone have tips on how to get all events, past, present, and future on the iPhone?

  • How do I move google calendar events to iCal?

    how do I move google calendar events to iCal?

    ab1268,
    I'm trying to do this very thing.  I have multiple google calendars set up (one for each kid, my husband etc.).  I want to move to iCal exclusively.  Based on your note above, should I export each individual calendar within ical.  Remove each from the iCal account and then reimport then into ical?  I suppose the risk is low b/c the data still exists in google.
    Please advise - I would hate to misstep.  Very new to the apple world (aside from iphone / ipad).
    Thanks!

  • How to add an attachment to a google calendar event when uisng safari

    how to add an attachment to a google calendar event when uisng safari?

    A similar question/answer here How can I detect end of HTML5 video and do something?
    See if that helps
    Darrell

  • Problem while bringing Google Calendar events to Oracle Tables

    Hi Friends,
    I have written the following code to bring the Google Calendar Events to Oracle Tables...
    CREATE OR REPLACE procedure XX_DEV.authenticate_service_test(p_email in varchar2,p_password in varchar2)
    is
    l_request utl_http.req;
    l_response utl_http.resp;
    l_params varchar2(255);
    l_resp_data VARCHAR2(4000);-- CHARACTER SET;
    l_auth_token VARCHAR2(4000);
    l_cal_entry CLOB;
    v_response_xml XMLType;
    v_entry_id varchar2(100);
    xml_result xmltype;
    cnt number:= 0;
    v_xmldoc CLOB;
    v_start_time date;
    v_end_time date;
    cursor c1 is select x.title title, x.content content, x.where where, x.start_time start_time, x.end_time end_time, x.entry_id entry_id from
    xmltable('feed/entry'
    passing xmltype(v_xmldoc)
    columns title varchar2(1000) path '/entry/title/text()'
    ,content clob path '/entry/content/text()'
    ,where clob path '/entry/gd-where/@valueString'
    ,start_time varchar2(100) path '/entry/gd-when/@startTime'
    ,end_time varchar2(100) path '/entry/gd-when/@endTime'
    ,entry_id varchar2(1000) path '/entry/id'
    ) x ;
    begin
    -- access the oracle wallet to allow us to make an https request
    utl_http.set_wallet(path => 'file:/u01/app/oracle/product/11.2.0/owm/wallets/oracle11/',password => 'srisys123');
    -- set up the request body with our credentials
    l_params := 'Email=' || p_email || '&Passwd=' || p_password ||'&service=cl' || '&source=e-DBA-test-1.0';
    l_request := utl_http.begin_request('https://www.google.com/accounts/ClientLogin','POST','HTTP/1.1');--accounts/ClientLogin
    -- set the request headers
    utl_http.set_header(l_request,'Content-Type','application/x-www-form-urlencoded');
    utl_http.set_header(l_request,'Content-Length',length(l_params));
    -- write out the request body
    utl_http.write_text( l_request, l_params );
    -- get the response
    l_response := utl_http.get_response( r => l_request );
    dbms_output.put_line('Status Code: '||l_response.status_code);
    loop
    utl_http.read_line( r => l_response, data => l_resp_data, remove_crlf => TRUE);
    dbms_output.put_line(l_resp_data);
    if substr(l_resp_data, 1, 5) = 'Auth=' then
    l_auth_token := substr(l_resp_data, 6);
    end if;
    end loop;
    exception
    when utl_http.end_of_body then
    null;
    dbms_output.put_line('Auth Token: '||l_auth_token);
    utl_http.end_response ( l_response );
    -- replace the substitution variables in the template with the parameter values
    --utl_http.end_response ( l_response );
    l_request := utl_http.begin_request(
    'http://www.google.com/calendar/feeds/default/private/full',
    'GET',
    'HTTP/1.1');
    utl_http.set_header(
    l_request,
    'Content-Type',
    'application/atom+xml');
    utl_http.set_header(
    l_request,
    'Authorization',
    'GoogleLogin auth='||l_auth_token);
    l_response := utl_http.get_response( r => l_request );
    utl_http.read_text(
    l_response,
    l_cal_entry
    dbms_output.put_line('Status Code: ' || l_response.status_code);
    /*select replace(l_cal_entry,'<?xml version='||'''1.0'''||' encoding='||'''UTF-8'''||'?>','') into l_cal_entry from dual;
    select ltrim(l_cal_entry,substr(l_cal_entry,1,148)) into l_cal_entry from dual;
    select '<feed'||l_cal_entry into l_cal_entry from dual;
    select replace (l_cal_entry,':','-') into l_cal_entry from dual;*/
    dbms_output.put_line('Calendar Event: ' || l_cal_entry);
    -- xml_result :=XMLType.extract(l_cal_entry,'//title');
    delete from xml_test1;
    insert into xml_test1 values (l_cal_entry);
    utl_http.end_response ( l_response );
    select DATA into v_xmldoc from XML_TEST1;
    execute immediate 'alter session set events = ''31156 trace name context forever, level 2''';
    for i in c1
    loop
    l_cal_entry:= NULL;
    dbms_output.put_line('Result: '||i.title||'*'||i.content||'*'||i.name||'*'||i.start_time||'*'||i.end_time||'*'||i.entry_id);
    begin
    select 1 into cnt from events_bkp where entry_id = i.entry_id;
    select nvl(to_date(rtrim(replace(i.start_time,'T',' '),substr(replace(i.start_time,'T',' '),12,20))||
    replace(substr(replace(i.start_time,'T',' '),12,8),'-',':'),'yyyy-mm-dd hh24:mi:ss'),sysdate) into v_start_time from dual;
    select nvl(to_date(rtrim(replace(i.end_time,'T',' '),substr(replace(i.end_time,'T',' '),12,20))||
    replace(substr(replace(i.end_time,'T',' '),12,8),'-',':'),'yyyy-mm-dd hh24:mi:ss'),sysdate) into v_end_time from dual;
    update events_bkp set description = i.title, notes = nvl(i.content,'No Notes'), start_date_time = v_start_time, end_date_time = v_end_time
    where entry_id = i.entry_id;
    exception when others then
    select nvl(to_date(rtrim(replace(i.start_time,'T',' '),substr(replace(i.start_time,'T',' '),12,20))||
    replace(substr(replace(i.start_time,'T',' '),12,8),'-',':'),'yyyy-mm-dd hh24:mi:ss'),sysdate) into v_start_time from dual;
    select nvl(to_date(rtrim(replace(i.end_time,'T',' '),substr(replace(i.end_time,'T',' '),12,20))||
    replace(substr(replace(i.end_time,'T',' '),12,8),'-',':'),'yyyy-mm-dd hh24:mi:ss'),sysdate) into v_end_time from dual;
    insert into events_bkp values(events_seq.nextval, 9, 1,1, 4, i.title, nvl(i.content,'No Notes'), v_start_time, v_end_time,'','',
    4, 1, sysdate, 1, sysdate, 13, i.entry_id);
    end;
    commit;
    end loop;
    execute immediate 'alter session set events = ''31156 trace name context off''';
    end authenticate_service_test;
    I am able to execute it successfully with my username and password but I am getting error when the number of events are more than 15...
    The parameter l_cal_entry which is of clob datatype is not holding the whole xml data.
    Please advice....
    Thank You,
    Srikanth

    Hi Friends,
    Now I am able to load all the events of a user by adding the following code
    loop
    utl_http.read_text(l_response, l_cal);
    l_cal_entry:= l_cal_entry||l_cal;
    end loop;
    but I am getting problem when the user has more than one calendar. The Begin_request link I am using is...
    'https://www.google.com/calendar/feeds/default/private/full'
    Using this, I am able to get only the events of a default calendar associated to the user.
    How can I get the events of all calendars or a particular calendar associated with the user.
    I may have to change the above link... I have tried with various combinations by appending calendar id but I am unable get the right combination
    Please advice...
    Thank You,
    Srikanth

  • Help!! My calendar events disappeared!! D=

    My calendar, contacts, and notes had been only stored on my iPhone, so I decided to sync them with Outlook so that I could restore them if I lost them on my iPhone. While my contacts and notes synced perfectly fine, my calendar events disappeared completely from my iPhone and did not appear in Outlook either. Everything is correctly checked to sync on the info tab. Please help soon! This was the only place I had my calendar stored and I need it back!!!

    I just had this happen as well and have found many threads on this issue. Do a search. I don't use outlook but I know I read other people who do. I'm using iCal. I found this link but not sure it would help you.
    http://support.apple.com/kb/TS3398

  • Can't edit Google Calendar events in iCal

    I am using Google Calendar's new CalDAV sync system and their "Calaboration" tool to sync my iCal (version 3.0.5, and I'm using Mac OS 10.5.2) with my Google Calendars, per the instructions on this page:
    http://www.google.com/support/calendar/bin/answer.py?answer=99358#ical
    It seems to work ok in that I can now see my google calendar events in iCal. I can also add an event to that calendar in iCal, and it will sync to my google calendar. However, I can't seem to edit an event in iCal that was created on the Google Calendar web page. That is, all my events that I created in Google Calendar do indeed appear in iCal, but I can't edit them in iCal. I can edit events that I create for that calendar in iCal, but not ones I created in google calendar. Not a huge deal, but I was wondering if this is how it is supposed to work, because it seems a tad inconvenient.
    (I do have my e-mail address in my address book "me" card, so that's not the problem.)

    Yeah, I tried deleting the calendars in iCal and re-synching to them via Calaboration, but the same problem persisted.
    I did find the solution after a bit of experimenting, though. To solve it, I basically created a new calendar on Google Calendar, imported all my events from my old google calendar into it, then used Calaboration to sync iCal to the new Google calendar, and now I can edit events in iCal and GCal without problems. I don't actually know what the problem WAS, but this seems to have solved it. Maybe I made my original Google Calendar too long ago and it had some old bad settings I couldn't see? I dunno, but it doesn't matter now.
    For those who might have this same problem, here's how I transferred my old Google Calendar events into a new Google Calendar without losing anything: (You actually don't need to delete your old Google Calendar at all if you don't want to, so there's no reason to worry about losing your events.)
    1. In GCal, click the "settings" link at the top right of the web page. Then select the "Calendars" tab. Click the "Export My Calendars" link, which should be under your list of calendars, next to the cancel button. This will download a .zip file to your computer, containing all of your google calendars as individual .ics files. Go ahead and unzip them so that the .ics file for the calendar you want to duplicate is sitting in a folder somewhere on your computer.
    2. Now In GCal, click on the "Create" link on the lower righthand side of the "My Calendars" box, which is on the lefthand side of the screen.
    3. Create a new blank calendar and name it whatever you want. This is the blank calendar into which you will import your old calendar's events.
    4. Now, in GCal, click "Add" at the bottom right of the "Other Calendars" box, which is under the "My Calendars" box on the left side of the web page.
    5. Select "Import Calendar".
    6. Click "Choose File" and browse to the .ics file you want to duplicate on your computer.
    7. In the "Choose Calendar" pull-down menu, select the new, blank calendar you made in step 3.
    8. Click Import. This may take a few minutes, depending on the number of events you have in your .ics calendar file.
    9. Once it's done, look at the calendar to make sure your events all came into your new Google Calendar ok. It should look exactly like the original google calendar, but it will be a different color.
    10. NOW, use Calaboration to sync your iCal to the New Calendar you just made in Google Calendar.
    11. Once it's done synching, you should be able to edit events in the calendar in iCal.

  • Safari 7.1 update wiped out all my Google Calendar events on mac and iPhone

    After the 7.1 update of Safari, all my events scheduled in google calendar vanished.

    Retract statement about not syncing to iPhone 5, More info: I'm running OS X 10.9.5 and updated to Safari 7.1. All Google Calendar events are gone.

  • TS1347 Sometimes my notes disappear and past calendar events disappear.  Is there a way to solve this problem?

    Sometimes my notes disappear and past calendar events disappear.  Is there a way to solve this problem?

    ''I know that I need imap instead of pop3''
    That's the solution.
    ''but there has to be an easier way to solve this.''
    I don't think so.

  • Yesterday, many of my calendar events disappeared from my iPhone and my computer

    Yesterday, several of my calendar events disappeared from both my Iphone and my computer.  Any suggestions on how to get them back?

    Is the setting for iCloud contacts turned on?

Maybe you are looking for

  • VA01 error

    Hi, When i use VA01 to create a new sale order , There are somes material that execute open_form for the SAPscript :  PSFC_PRINT_LAYOUT , but I got the error OPen_form not opened ) this means that the call function OPEN_FORM was in error so the START

  • HT4279 1 DVI + 2 mini port to HDMI adapters?

    Has anybody tried this?  I've currently got 1 DVI (30" connected to the DVI port) and a 2nd HDMI monitor (via miniport to HDMI adapter).  Can I add another HDMI monitor similarly?  There is no documentation on this configuration that I've been able t

  • OTN Oracle Database Downloads Not Working

    After agrgeeing to the T&C's none of the download links work. See this page for example: http://otn.oracle.com/software/products/oracle9i/htdocs/linuxsoft.html Specific Download not working: http://download.oracle.com/otn/linux/oracle9i/9202/ship_920

  • GP attachment

    Hi, all, In the GP, we can add attachments in the runtime through the attachment link at the top area. But i want to retrive those attachments even if the process is finish. Where can i find all attachments? Can those files store in the KM repository

  • Cube and aggregation

    Hi All, I have created a cube using OWB wizard. The aggregation tab applies to all measures of the cube, where as i want to apply aggregation at an individual measure. Any idea. Jak. Message was edited by: jakdwh