Google Earth using different Language with the System
I have installed the Google earth 4.2 into my 10.5.
Since my system language is English, however, I would like to set my google earth as Traditional Chinese in Language individually.
How could I do that.
Thanks a lot.
.
Since my system language is English, however, I would like to set my google earth as Traditional Chinese in Language individually. How could I do that.
In general the way you do this is to click once on the icon for the app, do File > Get Info, open the Languages tab, and uncheck all you do not want. My Google Earth 4.2 does not offer Chinese as an option. If yours is the same, you have to ask Google whether one exists.
Similar Messages
-
How use different languages in the edition and have the grammatical corrector?
Hello,
I am using the "ibook author" to create a magazine with different languages as text, and I would like to know if the program can reconogize the different languages, because it is cutting very bad all the words when it arrives to the end of the parraf.
Please let me know what solution could work for this case.
Thank you very much in advance
best regards
jc9revolutionWorks everytime i try
screen shots
new book with basic template.
First add second chapter
then
1) click TOC page tab/button
2) select image drag new image and replace image
3) click second dot to go to next chapter (2)
4) drag in new photo (farmer guy is new photo, replaced b&w flow photo)
now click on frist dot to go back to chapter 1 TOC will be first photo draged in (nycity) -
When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?
What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down? -
I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
Please helpCheck your login items in the Users & Groups preference pane. Remove any that you don't recognize.
-
I live between Europe and Asia..is possible use Creative Cloud in different countries with the same account?
Thanks.it doesn't matter for continued licensing.
it's no different than the situation of many people who 'vacation' and take their adobe programs with them (and have no difficulty). -
I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?
Is this a problem with the computer or with the word processor? MS Word for example seems to think its grammar and spelling are better than mine - they are not. You have to go into MS Word preferences and uncheck all the useless "help" it wants to provide.
-
How to use multiple languages at the same time for spell checking?
I use two different languages all the time and words are mostly so different (English and Finnish) that I could have spell checking on for both languages at the same time.
Now it seem to allow to select only one language at the time and I have to switch back and fort zillion of times per day.Thanks for the quick answer.
The Dictionary Switcher doesn't seem to work with Finnish language, it doesn't detect it at all to be one of the choices although in the Firefox context menu Languages -> Finnish/Finland is shown.
Also, if it would work, I would need to get rid of multiple EN_* langauges. I just need EN_UK or EN_US, not all 22 different EN_*.
One option would be to create a custom dictionary, which would have words from both languages. The next task is then to find out how to make this kind of custom ENFI-dictionary, which would have words from both English and Finnish languages.
Finnish may be a some kind of special case for spell checking anyway, because the support is in its separate plugin:
http://voikko.sourceforge.net/ -
So I have just had my potentially duff 1Tb hard drive replaced by apple and uploaded my data from time machine only to discover that pages is now speaking to me in a different language. The keyboard has been selected as UK during setup. Any idea how I can get back to qwerty?
roxandiv wrote:
pages is now speaking to me in a different language.
What exactly are you referring to? Are the menus or templates for Pages in a different language? Does something strange appear on the screen when you type?
Could you perhaps use the Camera icon here to post a screenshot of what you are seeing?
To make sure you have the right keyboard, go to system preferences/language & text/input sources and make sure that only the box for US or British is checked (and that the box for French or German or anything else is not checked). -
I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).
Screenshots attached to email replies will not make it back to the forum; you need to login to the forum and post it in your topic using the camera icon in the editor.
Google Chrome is a problem:
if you use Chrome's own PDF viewer, the results are unpredictable.
if you use the Adobe Reader plugin with Chrome, it may reject (block) it if it is not the latest version. Reader 11.0.08 is the latest version for Windows XP, but Chrome may insist on the current version 11.0.10.
My suggestion; use a different browser! -
Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be. -
Publish two publications from different customers with the same Adobe DPS ID
Hello:
I have a publication made on InDesign and I have uploaded it to the Adobe Server with my Adobe DPS account. For the first publication, I published the publication with the Folio Producer on the digitalpublishing portal, and then I created the app using the Adobe Viewer Builder. Then, I tried it locally on my iPad. It was working fine and I could see my publication.
Now, I do need to upload a new publication for a different customer with the same Adobe DPS account and I need to create a different app with the new customer look and feel but I don't want to show the first publication in this new app, only the last one.
In a nushell, I need to keep separated two publications (or more) when they are published if I'm using the same DPS Account... Is that possible?
Saludos Cordiales,Hi Leo,
Every title should have its own publication AdobeID (a title can contain multiple editions / folios).
So you have to request for every title you want to work on a provisioned account with Adobe. Make sure that you have setup the corresponding emailaddress / emailalias. For example [email protected] and [email protected]
After the accounts have been provisioned you can:
* upload and organize multiple folios for that publication in the corresponding Folio Producer
* Create a viewer with your Viewer Builder and on the first page supply the AdobeID for the give publication
You can request new publication accounts any time and these are included with your DPS subscription.
When you first account got provisioned, you should have received an excel document to request provisioning for the various publications. In this document you can list the accounts you want to use for publications, individual users of the system and viewer builder access.
With kind regards,
Klaasjan Tukker
Adobe Systems Benelux -
Using different templates for the desktop and phone versions of the same blog
I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
I have created both a desktop and a phone versions of the site.
I want to know how I can integrate the blogs that I currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
I have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
To recap my problem, I basically need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
Thanks.There can be few reason for this, including page contents links or contents used in phone/tablet version.
Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
Thanks,
Sanjit -
Schedule a report with the system date imbeded in the file name
Hello,
Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE? When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
Thanks!%SI_STARTTIME% will add the time the report ran too.
Adding onlt the date will necessarily have to be done via the appropriate SDK. -
Can we get a output in different languages for the same configuration
Hi All,
Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
language.
Thanks in Advance.
RajeshA Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
To maintain the translations:
Go to transaction SE63 in R/3.
Go to menu Translation->R/3 Enterprise->Other Long Texts
Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
Madhavi -
I have a Macbook with OS X 10.5.8. I am unable to use my iPhone with the iOS 6 upgrade on iTunes. Apparently I cannot downgrade to iOS 5 on my iPhone. Please tell me I don't have to pay anything to be able to use my products......
Which version of iTunes?
iTunes 10.6.3 - http://support.apple.com/kb/DL1575
Unless this is a new iPhone 5 I believe the older ones will work with iOS6 and iTunes 10.6.3. If it won't, you will need to upgrade operating system version.
Maybe you are looking for
-
Opening order in Photoshop CS2
I often export multiple photos from iPhoto to the desktop to open later in PS for compilation/editing. When I select a bunch of photos and open them at one in PS they open in a seemingly random order. I would think that they'd tile according to name.
-
How do I REACTIVATE my Apple ID?
I got my money being stolen by other people so my Apple ID was disabled, now i re-entered my money info and said it was done, yet it still says my account is disabled...HOW DO I REACTIVATE IT?
-
I am so worried for my iPhone because it is too expensive and I restored it too many times.
-
Why can't Lightroom open or create a catalog on a network drive?
I just filled up my external drive and spent over $1300 on a Drobo NAS to find out Lightroom can't open or create a catalog on a network drive? EPIC FAIL!!!! How do I store over 8 TB of catalogs on my NAS and still be able to access them? Do I need t
-
I tried updating my phone but it went to the iTunes logo and a charger logo
I tried updating my phone but it went to the iTunes logo and a charger logo