Google Exchange mail error
Wow... I keep finding bugs.
I just restored my iPhone 4 since it was resetting every few min after the initial restore from my 3G's backup.
Now however it seems Exchange and google or email links maybe are causing havoc on my device.
If I enter the contacts app and I press on the email address of anybody so that I can start composing an email, the phone freezes, displaying yellow/brown lines over the screen and then promptly restarting, works every single time...
Anyone else have these issues?
Edit: If I disable contacts from Google sync, the error goes away... but the mail app just crashed the entire phone again? Seems something is still wrong, iPhone just freezed after clicking a new mail link.
Message was edited by: no1089
Message was edited by: no1089
if a restore did not work.. then your only option is to take your phone to the apple store and get it replaced.. Theres not settings on the phone that would cause this behavior normally
Similar Messages
-
Iphone 6 exchange mail error via wifi
Device: iPhone 6
Issue with exchange mail via Wifi
Sending and receiving exchange mail via mobile network (3G/4G) works perfectly.
Once I arrive at home and my device switches to our wifi network issues start.
Sending a mail results in an error message: "sending e-mail not successful. Error at delivery of this message."
Mail can be found in the outbox of the exchange account.
However...afterwards it seems the mail has been sent anyway. Although he's removed from the outbox, not in the sent box and arriving in the recipients mailbox anyway.
Mails do not come in as long as connected to Wifi.
Once Wifi is deactivated and device switches to mobile network, mails enter.
What can be the issue and how can I solve this? I don't want to switch off/on the wifi each time to check/send mails from my office/exchange account.
Thank you.Contact your IT department.
-
E-71 Mail for Exchange "Exchange Server Error"
Would appreciate some urgent help.
I am using the E-71 with latest phone update and M4Ex 2.09.158 installed.
E-mail and Calendar have been set to sync.
While the first few syncs are OK (approx first 10 syncs), it subsequently develops/indicates an error with the message "Exchange Server Error. Please try again later." I noticed that this usually happens after e-mails have been synced. When it tries to sync the Calendar, the error message pops up. E-mails are synced, but not Calendar.
While I have resorted to do a full resync everytime the error message appears, this requires me to reset the e-mail profile settings everytime. Full resync is only a turnaround solution in the circumstances.
Cheers
Does anyone or someone at Nokia Support have a solution to these errors?just checking if u have tested these settings on a different phone?
also what range of entries are u syncing? mebbe try syncing it for 2 weeks to see if the same error comes up?
if my post helped u out, please click the Star next to it to add some KUDOS to my name -
ICU shows errors during the connection to exchange mail
Hello everyone,
I have the following problem. When connection the exchange mail, during the synchronisation, such error appears on my device's screen:
"Cannot Get Mail.
The connection to the server failed"
After few minutes, when errors on the screen are confirmed many times, the mail is synchronised and messages are downloaded from the server to the device (e.g on iPhone5 iOS 7.1).
The logs in ICU show the following information:
Mar 26 10:42:14 #######-iPad dataaccessd[111] <Warning>: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9824)
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Notice>: 0x16d41ab0|EAS|Error|[ASFolderItemsSyncTask 0x16f07680, conn 0x16ef9470, request 0x16ef8020] connection died with error Error Domain=NSURLErrorDomain Code=-1200 "An SSL error has occurred and a secure connection to the server cannot be made." UserInfo=0x180f02c0 {NSErrorFailingURLStringKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSErrorFailingURLKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedDescription=An SSL error has occurred and a secure connection to the server cannot be made., NSUnderlyingError=0x180f4310 "An SSL error has occurred and a secure connection to the server cannot be made."}
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Notice>: 0x16d41ab0|EAS|Error|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1200 "An SSL error has occurred and a secure connection to the server cannot be made." UserInfo=0x180f02c0 {NSErrorFailingURLStringKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSErrorFailingURLKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedDescription=An SSL error has occurred and a secure connection to the server cannot be made., NSUnderlyingError=0x180f4310 "An SSL error has occurred and a secure connection to the server cannot be made."}
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Notice>: 0x16d41ab0|EAS|Error|Folder with id 7 and title savedd has failed to sync 2 time(s) in a row
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Warning>: CFNetwork SSLHandshake failed (-9824)
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Warning>: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9824)
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Notice>: 0x16d41ab0|EAS|Error|[ASFolderItemsSyncTask 0x180eb3b0, conn 0x1813bfc0, request 0x16fcf400] connection died with error Error Domain=NSURLErrorDomain Code=-1200 "An SSL error has occurred and a secure connection to the server cannot be made." UserInfo=0x16f0cd40 {NSErrorFailingURLStringKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSErrorFailingURLKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedDescription=An SSL error has occurred and a secure connection to the server cannot be made., NSUnderlyingError=0x180f4310 "An SSL error has occurred and a secure connection to the server cannot be made."}
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Notice>: 0x16d41ab0|EAS|Error|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1200 "An SSL error has occurred and a secure connection to the server cannot be made." UserInfo=0x16f0cd40 {NSErrorFailingURLStringKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSErrorFailingURLKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedDescription=An SSL error has occurred and a secure connection to the server cannot be made., NSUnderlyingError=0x180f4310 "An SSL error has occurred and a secure connection to the server cannot be made."}
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Notice>: 0x16d41ab0|EAS|Error|Folder with id 29 and title Search results has failed to sync 2 time(s) in a row
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Warning>: CFNetwork SSLHandshake failed (-9824)
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Warning>: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9824)
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Notice>: 0x16d41ab0|EAS|Error|[ASFolderItemsSyncTask 0x180edb50, conn 0x1803b410, request 0x16ddfd90] connection died with error Error Domain=NSURLErrorDomain Code=-1200 "An SSL error has occurred and a secure connection to the server cannot be made." UserInfo=0x180e1920 {NSErrorFailingURLStringKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSErrorFailingURLKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=#######iPad&Cmd=Sync, NSLocalizedDescription=An SSL error has occurred and a secure connection to the server cannot be made., NSUnderlyingError=0x1809e090 "An SSL error has occurred and a secure connection to the server cannot be made."}
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Notice>: 0x16d41ab0|EAS|Error|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1200 "An SSL error has occurred and a secure connection to the server cannot be made." UserInfo=0x180e1920 {NSErrorFailingURLStringKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSErrorFailingURLKey=https://mail.#######.com/Microsoft-Server-ActiveSync?User=#######&DeviceId=ApplD LXFP3G9DKNV&DeviceType=iPad&Cmd=Sync, NSLocalizedDescription=An SSL error has occurred and a secure connection to the server cannot be made., NSUnderlyingError=0x1809e090 "An SSL error has occurred and a secure connection to the server cannot be made."}
Mar 26 10:42:15 #######-iPad dataaccessd[111] <Notice>: 0x16d41ab0|EAS|Error|Folder with id 4 and title Contacts has failed to sync 2 time(s) in a row
Mar 26 10:42:28 #######-iPad SpringBoard[33] <Notice>: 2014-03-26 10:42:28.020|33|0x5e1e950: Region monitoring not available or enabled. Trigger ignored!
Mar 26 10:42:52 #######-iPad MobileMail[117] <Warning>: CFNetwork SSLHandshake failed (-9806)
Mar 26 10:43:11 #######-iPad MobileMail[117] <Warning>: CFNetwork SSLHandshake failed (-9806)
Does anyone have an idea why the mail has such delay in synchronising ? Also why the ssl handshake and errors on the screen occurrs? The email domain has a valid certificate.
Thanks in advance!!Hope this helps someone like me, who has trying to figure out what went wrong. I have an iPhone 3G and ActiveSync to Exchange 2003 was working perfect for month's. All of a sudden today it stopped syncing my inbox and my battery just about died? Searched and Searched, rebooted Exchange, removed email account info, still not luck keep getting "Cannot Get Mail" "The connection to the server failed" message. The weird thing is I could get to my sent items, Calendar and AD contacts? But a thread in another Apple forum opened my eyes to what the problem was...a corrupt email in my inbox. Not sure what email it was I pretty much deleted every email I had after the last one I received on the iPhone. But it fixed the problem, no messing with Exchange virtual directories...nothing...just deleted a corrupt email!
Hope this helps someone..... -
Brand ne iPad 3. Installing a Google Apps mail account as Exchange kills my Camera, Face Time and Photo Booth. They disappear from the Desktop and are nowhere to find or retrieve. Deleting the mail accoun t brings them back immediately. I have already full reset the device and updated the software with no result.
Is there a solution?Yep, Meg, you were right and here are the steps which cure the issue. Disable camera is actually a basic Google Apps setting .
Log in to your Google Apps Control Panel.
Click on your 'Settings' tab.
Under the 'Org Settings' tab locate 'Mobile Settings/Device Settings'
Enable 'Allow camera'.
Save changes.
Re-Install Google Apps E-mail account
It works perfectly fine now.
Footy, my cat, sends you nice regards as well.
Rgds from the Slovenian Karst -
HT1277 How do I sync Google Apps mail account with Apple Mail 5.2?
How do I sync Google Apps mail account with Apple Mail 5.2?
To add your Google Apps mail account:
1. Select Mail-->Preferences
2. Select the Accounts icon and click the + button in the lower left corner.
3. An Add Account screen should appear
ADD ACCOUNT
4. Add your
Full Name
Email Address, and
Google Apps password
in the appropriate boxes.
5. Click the Continue button and the Incoming Mail Server screen should appear.
INCOMING MAIL SERVER
6. From the Account Type pull down menu, select Exchange IMAP.
7. Fill in the text boxes as follows:
Description: what ever makes sense to you
Incoming Mail Server: imap.gmail.com
Username: [email protected]
Password: Google Apps password
Outlook Web Access Server: www.gmail.com
8. Click the continue button and the Outgoing Mail Server screen should appear.
OUTGOING MAIL SERVER
9. Fill in the text boxes as follows and make sure Use only this server and Use Authentication is checked:
Description: what ever makes sense to you
Outgoing Mail Server: smtp.gmail.com
8. Click the Continue button and the Account Summary screen should appear.
ACCOUNT SUMMARY
9. Click the Create button
10. You're done! -
Since there is no longer a Microsoft exchange, is there a way to sync apple cloud contacts with gmail contacts on ipads and pc
Here you go:
https://support.google.com/mail/answer/2753077?hl=en -
Imap smtp - window live mail errore 0x800CCC69 - same settings in thunderbird everything is ok
exchange 2013 external client send in smtp
thunderbird can send email
Windows live mail gives these error
Server Response: 550 5.7.1 Client does not have permissions to send as this sender
on exchange smtp log i found
2014-07-15T13:52:18.456Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,39,*.*.*.*:587,*.*.*.*:35136,*,mydomain/postmaster33,authenticated
2014-07-15T13:52:18.565Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,40,*.*.*.*:587,*.*.*.*:35136,*,,Proxy session was successfully set up. Session mydomain/postmaster33 will now be proxied
2014-07-15T13:52:18.565Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,41,*.*.*.*:587,*.*.*.*:35136,>,235 2.7.0 Authentication successful,
2014-07-15T13:52:18.931Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,42,*.*.*.*:587*.*.*.*:335136,-,,Remote(SocketError)
any idea?Hi, the iussue is on sending mail. From thunderbird imap and SMTP everything is ok from windows live mail i receive these error :
An unknown error has occurred.
Subject 'ciaoo'
Server Error: 550
Server Response: 550 5.7.1 Client does not have permissions to send as this sender
Server: 'mail.mydomain.com'
Windows Live Mail Error ID: 0x800CCC69
Protocol: SMTP
Port: 587
Secure(SSL): Yes
as u requested the permission of my connector:
[PS] C:\Windows\system32>Get-ADPermission "Client Frontend CAS" -User "authenticated users" | ft User, ExtendedRights
User ExtendedRights
NT AUTHORITY\Authenticated Users {ms-Exch-SMTP-Accept-Any-Recipient}
NT AUTHORITY\Authenticated Users {ms-Exch-Accept-Headers-Routing}
NT AUTHORITY\Authenticated Users {ms-Exch-Bypass-Anti-Spam}
NT AUTHORITY\Authenticated Users {ms-Exch-SMTP-Submit}
NT AUTHORITY\Authenticated Users {ms-Exch-SMTP-Accept-Authoritative-Domain-Sender}
and evidence of the log when windows mail send a message
2014-07-15T13:52:18.456Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,39,*.*.*.*:587,*.*.*.*:35136,*,mydomain/postmaster33,authenticated
2014-07-15T13:52:18.565Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,40,*.*.*.*:587,*.*.*.*:35136,*,,Proxy session was successfully set up. Session mydomain/postmaster33 will now be proxied
2014-07-15T13:52:18.565Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,41,*.*.*.*:587,*.*.*.*:35136,>,235 2.7.0 Authentication successful,
2014-07-15T13:52:18.931Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,42,*.*.*.*:587*.*.*.*:335136,-,,Remote(SocketError) -
UTL.MAIL error ORA-29279: SMTP permanent error: 501 Address Syntax Error in
Hi,
I am new to the forum so please excuse if I post incorrectly without conforming to the standards.
We need to send mails using the UTL.MAIL package and have installed them on the database.
Whenever I am trying to send an email I am getting the following error:
ERROR at line 1:
ORA-29279: SMTP permanent error: 501 Address Syntax Error in
[email protected]
ORA-06512: at "SYS.UTL_MAIL", line 654
ORA-06512: at "SYS.UTL_MAIL", line 671
ORA-06512: at line 2
The test code which I am running is as follows:
BEGIN
UTL_MAIL.send(sender => 'test <[email protected]>',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
I have tried different combinations:
BEGIN
UTL_MAIL.send(sender => 'test "<[email protected]>"',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
even tried
BEGIN
UTL_MAIL.send(sender => '[email protected]',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
Everytime I am getting the same error.
This seems to be working with an exchange mail server but never on the SMTP server.
In the SMTP server logs the sender address is not having the angular brackets <> unlike the other mails which are being sent over.
It seems that the SMTP server is pretty strict and the SMTP admin will not change any settings on the server.
The oracle version is as follows
Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Could you please help me out with a solution.
Some how the angular brackets are geting stripped off (which UTL MAIL package generally does), Is there any way in which I can include the angular brackets.
Edited by: 984757 on 29-Jan-2013 02:56
Edited by: 984757 on 29-Jan-2013 02:57I dislike UTL_MAIL - clunky and poor abstraction interface, and not well written.
Had a look at the code. It does this:
WHILE (ALL_RCPTS IS NOT NULL) LOOP
UTL_SMTP.RCPT(MAIL_CONN,'<' || GET_ADDRESS(ALL_RCPTS) || '>');
END LOOP;The GET_ADDRESS() function process the ALL_RCPTS parameter, returns the 1st address from it, and updates the (in/out) parameter with the remaining string.
SQL> var address varchar2(200);
SQL> exec :address := '<[email protected]>,[email protected]';
PL/SQL procedure successfully completed.
SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
get_address=[email protected] address=[email protected]
PL/SQL procedure successfully completed.
SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
get_address=[email protected] address=
PL/SQL procedure successfully completed.
SQL> The address is explicitly surrounded by brackets as per the RFC. So that is what your SMTP server should see.
If not - perhaps then our UTL_MAIL versions do not match. Cannot recall from what version I pulled and unwrapped the UTL_MAIL package code I have.
Personally though, I've ceased using UTL_MAIL a while back. It lacks in may respects. I have written my own mail package that supports multiple attachment, complex Mime formatting, attachments of 20+ MB in size, and so on - running on the UTL_SMTP interface (that provides the transport layer for sending mail). And for issues like you are facing, I suggest considering using UTL_SMTP directly.
Edited by: Billy Verreynne on Jan 29, 2013 12:52 PM
(Updated the code with HTML entity names to get the code snippet to render correctly) -
Unable to configure my Exchange mail to my BB
Hi
I am using a BIS plan, I was trying to configure my Exchange mail in to my BB. I try using OWA. but i was not able to do getting error messgae like check user name and password or contact administrator if problem persist.
Can any one help me?
RegardsPlease read over these Knowledge Base articles:
Article ID: KB03133 How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
Article ID: KB02858 Unable to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Error: Exchange server error. try again later
Hi All,
I am gettign a number of users complaining about the error "Exchange server error. try again later"
Does anyone have any tips to resolve pleaseI am gettign a number of users complaining about the error "Exchange server error. try again later"
Does anyone have any tips to resolve please
I have tried the suggestion fro Hazkey
Could you try the following actions please:
Open Outlook web access with your PC browser, for example via https: //[your domain]/owa (depending on your network) – and log into your emails.
In your inbox, select Options (on the top right hand corner of your screen) and then See all Options.
Select Phone.
Delete all connections by selecting the respective phone and pressing (X).
Then just go back to the Mail for Exchange client on your phone and do a sync.
If above does not help, contact Nokia Support.
However, I can not see the "options" in outlook web access. My options is a tab on the left at the bottom. How do I see this options in the top right hand corner of the screen?
Cheers
Attachments:
inbox.jpg 35 KB -
Exchange Mail Store Lookup Reconciliation no longer returns the values
Hi guys,
I executed the schedule "Exchange Mail Store Lookup Reconciliation" and returned the value of mail store with sucess. Now I run again but not return the values. The values existed on the Lookup.ExchangeReconciliation.MailStore was cleaned.
I need this values for provision a user to Exchange. Is it ok?
ThanksI execute the task, is finished with success. But not bringer any values to Lookup.ExchangeReconciliation.MailStore
[2012-01-11T11:08:39.250-02:00] [oim_server1] [NOTIFICATION] [] [OIMCP.MEXC] [tid: OIMQuartzScheduler_Worker-9] [userId: oiminternal] [ecid: 0000JJCoOzaE^MWFLzyGOA1F3OLz000002,0] [APP: oim#11.1.1.3.0] com.thortech.xl.schedule.tasks.tcExchangeMailStoreLookupReconTask : execute : Starting Exchange Mail Store Lookup Reconciliation Task
[2012-01-11T11:08:39.255-02:00] [oim_server1] [NOTIFICATION] [] [OIMCP.MEXC] [tid: OIMQuartzScheduler_Worker-9] [userId: oiminternal] [ecid: 0000JJCoOzaE^MWFLzyGOA1F3OLz000002,0] [APP: oim#11.1.1.3.0] com.thortech.xl.schedule.tasks.tcExchangeMailStoreLookupReconTask : isReconStopped : Stopping Reconciliation.....................
[2012-01-11T11:08:41.924-02:00] [oim_server1] [NOTIFICATION] [] [OIMCP.MEXC] [tid: OIMQuartzScheduler_Worker-9] [userId: oiminternal] [ecid: 0000JJCoOzaE^MWFLzyGOA1F3OLz000002,0] [APP: oim#11.1.1.3.0] com.thortech.xl.schedule.tasks.tcExchangeMailStoreLookupReconTask : execute : Exchange Mail Store Lookup Reconciliation Ends
For provision a user to Exchange, I need select a "Mail Store" on the form. But if task "Exchange Mail Store Lookup Reconciliation" not bring the values to Lookup, I can not provision a user. I'm correct?
Because when I try provision a user to Exchange, in the log, show me:
[2012-01-11T11:05:00.508-02:00] [oim_server1] [ERROR] [] [OIMCP.MEXC] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: bfccc7416174d6cc:6f5adea4:134ccd17bf0:-8000-000000000000025a,0] [APP: oim#11.1.1.3.0] com.thortech.xl.integration.Exchange.tcExchangeTasks : createMailboxForADUser : Insufficient data, may be all mandatory field are not present : :Index: 0, Size: 0
[2012-01-11T11:05:00.509-02:00] [oim_server1] [ERROR] [] [OIMCP.MEXC] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: bfccc7416174d6cc:6f5adea4:134ccd17bf0:-8000-000000000000025a,0] [APP: oim#11.1.1.3.0]
Thanks a lot -
How to setup exchange mail account in 3rdGen iPad?
I got "unable to verify account information" error after setting the exchange account. I also got "cannot get mail the connection to the server failed" error every time I go to mail.
-
Exchange mail setup - unable to verify certificate
When i set up my exchange mail account, just after i enter the exchange server details, i get a message saying "unable to verify certificate" and the option to "accept", which i did.
Thereafter i get the error message "failed account verification"
Does anyone know what the issue / workaround here is?OK, here is my information from Outlook OMA.
=============================================
Outlook(R) Mobile Access
Copyright (C) 2001-2003, Microsoft Corp. All rights reserved.
Ok
Outlook(R) Mobile Access Server: EDCOWA02
Outlook(R) Mobile Access Server, Microsoft(R) Exchange: 6.5.7226.0
Outlook(R) Mobile Access Server, Microsoft(R) Windows: 5.2.3790.0
Outlook(R) Mobile Access Server, Microsoft(R) .Net Framework: 1.1.4322.2407
Mailbox Server: EDCEXC01
Mailbox Server, Microsoft(R) Exchange: 6.5.7226
User Mailbox: Luis.Cavada
Rendering Format: html32
User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727; .NET CLR 1.1.4322; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)
========================================================
Can someone help me in figuring out what is the user name and exchage server which i need to setup in my iphone 3G Exchnage settings.
I have tried everything I cound think of, but no luck !
Thanks, -
i am using a PowerShell Script that uses EWS (Exchange WebService).
This script connect to an exchange mail box account, list mails containing attachments and then extract, the attachments and put them on folders. The script works fine with csv and txt. However, with xls attachment having size of 4MB, the script fails with
this below error. However, the script successfully extracts the xls attachment when its size does not exceed 20KB. Script file was attached. Could you please help me on this issue.
Exception calling "Load" with "0" argument(s): "The request failed. Unable to read data from the transport connection: An existing connection
was forcibly closed by the remote host."
At D:\duga\ppa_log.ps1:93 char:21
+ $attach.Load <<<< ()
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Here is a snap from the code of the script :
$ivItemView = New-Object Microsoft.Exchange.WebServices.Data.ItemView(5000)
$downloadDirectory_3 = "\\filepath”
$findItemsResults = $Inbox.FindItems($Sfha,$ivItemView)
foreach($miMailItems in $findItemsResults.Items){
$miMailItems.Load()
foreach($attach in $miMailItems.Attachments){
$attach.Load()
if ($attach.Name -like "abc_*.xls"){
$fiFile = new-object System.IO.FileStream(($downloadDirectory_3 + ?\? + $attach.Name.ToString()), [System.IO.FileMode]::Create)
$fiFile.Write($attach.Content, 0, $attach.Content.Length)
$fiFile.Close()
write-host "Downloaded Attachment : " + (($downloadDirectory_3 + ?\? + $attach.Name.ToString()))
Please help me out on this issue.Artical seems to for Exchange Server 2013.
I am looking for Exchange 2010 solution.
There's an 'Other Versions' link under the page title where you can select Exchange 2010. Here's a direct link:
http://technet.microsoft.com/en-us/library/hh529949%28v=exchg.141%29.aspx
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)
Maybe you are looking for
-
My printer is listed, but the hp app cannot find my printer....hp office jet pro 8500a... iPad
All the other apps on my iPad can find my printer on the network. The hp ipad print Scan app cannot. This question was solved. View Solution.
-
I have a hp officejet pro 8500a plus. can i print in all black when the other ink colors are out?
i'd like to find out if there is a way i can still in black if i have one color cartridge empty
-
Hi, I am practicing BI7 by taking standard infocube and datasource 2LIS_12_VCITM.Upto now i am familiar with BW3.5 but i am new to BI7.When i log on to BI7 i saw datasources with small square before it.I came to know that they are BW3.X datasources i
-
Netweaver As Java 700 Login issue
Hi all, Met an issue in Netweaver As Java 700. When I logon with correct user/password, it just stayed in the login UI and no error message. I remember that I have saw that in a SAP Note that I should create extra user group in VA. But I can not reme
-
Touch screen not working in Safari
Bear in mind that the iPhone is the first cell phone I've ever had (yes, I'm an old geezer). Just got it last Friday. But this morning while visiting a website all of a sudden I am no longer able to select any links, e.g. I tap a link but nothing hap