Google For Domains

Everything with my iPhone setup went smoothly except for my email accounts that are using Google for Domains. They are unable to communicate with the server.
Mail on the iPhone has appended the @gmail.com to my accounts which does not work.
What should be: [email protected]
becomes: [email protected]@gmail.com
Is there a solution for this? If not the mail app is basically useless for me.

I have a google's App's account, what I did was:
Choose 'Other' from the create mail (or add account)
Choose 'Pop' at the top
Name: your name (whatever it doesn't matter here)
Address : [email protected]
Description: (whatever)
Incoming
Host Name: pop.gmail.com
User Name recent:[email protected]
Password: yourgoogleapps_emailpassword
Outgoing
Host Name: smtp.gmail.com
username [email protected]
password: yourgoogleapps_emailpassword
Tip: using the 'recent:' will help your mobile device just bring down the last several emails this helps reconcile if you have more than one device using pop to get mail from your google account. you don't have to use recent: you can just use '[email protected]'
Worked great for me.. (make sure you have pop enabled on your google account) Hope this helps.
lots of macs and pc's   Mac OS X (10.4.9)  

Similar Messages

  • Checkgmail & Google For Domain = 401 Unauthorised

    Hi,
    I just installed checkgmail notifier 1.13-3 (current one in community repo), but it doesn't work if I'm trying to log in with my own domain. I'm using this details:
    Feed: mail.google.com/a/MYDOMAIN.TLD/feed/atom
    username: stastny (nor even [email protected], nothing works)
    password: my_password
    I think the info above is correct. I googled about it and found a lot of people with similar problem, they suggested to use checkgmail from SVN because Gmail changed authentication algoritm (or so), but these posts are an year old, so I guess these changes should already be in the package, or not?

    I've been using checkgmail a long time and yesterday recieved error 401. But I was able to resolve by resetting my modem to get a new ip address per the Checkgmail hompage.
    Last edited by tesjo (2009-10-01 14:51:42)

  • Best push email domain solution (Google apps for Domains?)

    What email service provider offers the best iPhone push email support. Obviously, Mac OS X Server 10.6 would be the best, but as far as third party options that can host your domain's email accounts and get you push on the iPhone and IMAP in Apple Mail?
    Looking at Google Apps for Domains, but concerned about how it has to have two of each message to work with IMAP correctly.
    Thanks for any thoughts!

    Zimbra is another potential solution

  • Yoga 2 Pro - Win 8.1 x64 Pro - VeriFace doesn't work for Domain accounts

    First - Lenovo's own tech support team seems completely unprepared for this product.  There are no install packages online for anything but core drivers and the support teams really don't know much about the custom Lenovo software like VeriFace.  Not bashing, just a disappointing reality.  I'm hearing Lenovo does this all the time and that in a few months, stuff will appear.  Great.
    REAL issue: VeriFace won't work for Domain accounts.  Pure and simple.  I'm a geek, so I know the right account name shows up at the lock screen.  When I type in the password, it says Incorrect.  If I use a local account, bingo, works perfectly.  I Googled some notes back in 2008/2009 where some people found a work-around by creating a local account with the same login name (obviously without the "domain\" part) to trick VeriFace.  I tried it and it didn't work.
    Can anyone else confirm this?
    p.s. I tried uninstalling / reinstalling and you DON'T want to do that.  See my first point.  You can't re-install b/c the software ONLY exists in the hidden reset partition in OneKey Recovery.  You have to completely reset your PC in order to get it back.

    Confirmed. I even tried this trick, but this did not work for me
    http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/VeriFace-with-XP-Domain-Accounts-Upside-dow...

  • Windows Server 2008 - Group policy for domain client to start/stop services installed on it

    Hello Experts
    I am a newbie to windows server administration , though did a Google  , but ended up with these question with my requirements
    I have created a new domain and 2 client/computer (A & B namely) to domain . Now A & B has tomcat server running with port 8080 , 9090 which i have installed
    domain ADMIN account .
    && now i am want to start/stop/restart services enabled for domain users  !! How do i achieve this !!
    basic question : How can i access A & B tomcat services on DOMAIN CONTROLLER server to create a GPO and that are on (A & B)
    what is the easiest way to achieve the same , (if not using GPO)???
    similarly I am looking for many features : where I want to control the permission to user on (A & B ) like : If the binaries of tomcat is available on machine say : A , if the user can install (now
    it ask for ADMIN credentials) 
    Thanks
    Mike~Ed

    Controlling services with Group Policy is done under Computer Configuration\Policies\Windows Settings\Security Settings\System Services.
    The limitation is that system services can only see the services the computer running the Group Policy management console. To access other services, you will either need to create the services on your computer (install the software the adds the service)
    or install the remote server administration toolkit (RSAT) on the computer with the service already on it.
    If my answer helped you, check out my blog:
    Deploy Happiness

  • Slow "looking up" for domain first time every session in firefox 4 RC1

    I hope I posted this on the correct site, because I was doubting on whether post it here or on the networking subforum (or even another place I didn't thought about).
    Every time I launch firefox 4 (using AUR's firefox-pgo-beta 4.0rc1build1-3) and use it to search any website, lets say google.com (yes, what is going to be described happens even with google) firefox is "looking up for google" for like 5 or so seconds. After that, the page loads fast, no problem with speed.
    But this happens only the first time I load any website, if I load it again without closing FF, it will load fast, without that 5 sec delay.
    What drives me lets say crazy is that this does NOT happen with: Chromium, Firefox(3.6) used in a VirtualMachine (everything said until this point, under Arch), or FF4 or Chrome installations on my Windows 7 partition. In addition, this seems to only happen when using my laptom on my house, as when conected to the college wifi that delay is not present.
    Laptop: Fujitsu Esprimo Mobile V6535
    I'm currently using a Netgear CG3100D router provided by Spanish' ISP ONO, with 50Mb download / 3Mb upload conection working without problems even in firefox4 under Arch (tested using Speedtest.net and some downloads). The only trouble seems to be those first loads of domains.
    I've tried until now to solve any trouble like this by myself, and most times I managed to do it searching info on the internet, but no clue found on this.
    PS: really nice distribution, makes me think i really found the disribution that suits 100% with me. Oh, BTW, awesome wiki and comunity, thanks to both I almost got all the possible troubles related to my laptop making Arch running out of the box.

    Sir, that's a total win.
    Changed to true, restarted FF, and then, normal behavior.
    Thank you for your help.

  • Num_rows = null for Domain Index

    Hello!
    SQL> SELECT index_name, index_type, status, num_rows FROM user_indexes WHERE table_name = 'STUFF';
    INDEX_NAME                     INDEX_TYPE                  STATUS     NUM_ROWS
    IDX_STUFF_ATTR1               NORMAL                      VALID       3004176
    IDX_GEOM_STUFF                DOMAIN                      VALID
    PK_STUFF                      NORMAL                      VALID       3268049
    SYS_IL0000091928C00016$$       LOB                         VALID
    SYS_IL0000091928C00017$$       LOB                         VALIDIs it normal that the data dictionary has no num_rows for a domain index? I googled and searched the forums but couldn't find anything relating specifically to domain indexes. There was a post mentioning that bitmap indexes will not show a correct num_rows, so I suspect it might be the same for domain indexes?
    Regards,
    Christian

    Hi Christian,
    I forgot the comma between last_analyzed and num_rows in my previous post.
    Well.... a detail called my attention, and it is the name of the index itself: IDX_GEOM_STUFF.
    I would not consider any issue on the fact that it is a Domain Index.... but most likely a Spatial Index (since i see GEOM)!
    I googled, and found a few links that you should investigate (to start with), and maybe, you could tune your question so that expert with Spatial can help you further if needed:
    http://forums.esri.com/Thread.asp?c=2&f=1720&t=233552
    http://forums.esri.com/Thread.asp?c=158&f=2291&t=230495&mc=8#msgid700335
    http://www.dbasupport.com/forums/archive/index.php/t-23029.html
    From discussion: http://forums.esri.com/Thread.asp?c=2&f=1720&t=202266
    You can read:
    SDO_GEOMETRY layers do not have spatial index statistics. Only layers with S tables can, since the statistics are calculated on the S tableSo, as you started with, mentioned Bitmap indexes... i guess the Spatial thing need a double check.
    HTH !!
    Thierry
    Edited by: Urgent-IT on Feb 9, 2011 4:12 PM
    Edited by: Urgent-IT on Feb 11, 2011 9:31 AM
    You should mark the thread as answered if the responses have provided you with an appropriate response.

  • I have been putting in a URL and yahoo snags it parses it to several words then gives me a search page... I use Google for search andf I want to go to the specific URL I entered... How do I block Yahoo from doing this crap?

    I use google for my search engine. I do not have any reference to Yahoo in my plugins or extensions on Firefox. Every time I enter a specific URL in the Firefox box, Yahoo comes up, has the full URL I entered to go directly to. It has the URL in the Yahoo search entry field and it parses the name to several words that make up the entire URL. Asks me if I only want the name I entered and lists every site that contains the words it parses... Yahoo is really screw up if it hijacks the browser. How do I prevent them from doing this...

    Hi,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Companionlink Google for Calendar - OR - ANY Wireless Sync Software

    I've been hacking at a way to wirelessly sync my BBerry Bold 9650 with Outlook 2007 and Google.  Since the BBerry solution offers a good email sync, there is no problem there.  Once you install Companionlink Google for BBerry it is clear that unless you want contacts to multiply you cannot have 2 programs doing the syncing.  So, I erased the phone, backed up my contacts and calendar from Outlook 2007 - then erased them in Outlook, and erased them my Gmail contacts and calendar.  Then I did a clean install of my Blackberry email setup for gmail - and "did not" check to have the contacts sync through BBerry's solution.  All worked so far.  Then I installed Companionlink on the PC (Vista), and configured that it would sync contacts and calendar.  Lastly I had companionlink send a link to my BBerry with the mobile app - which I configured to sync contacts tasks and calendar.  Then I wasn't getting my email.  So I deleted my gmail account from the phone and re-registered it for email only.  This worked.  Everything was syncing like a charm.  Next thing I know (about 3 hours later) Companionlink crashed!!  Has anyone had this happen?  After trying many apps to fully sync outlooks functionality I'm depressed!  Who wants to plug the phone in every night?  Can any one help with a solid and trouble free solution or app that works??  

    Again, not having a Windows Mobile Treo, have you checked the software download section on the VZW customer support area?  I found this article which might be helpful.  If you are talking about the VZW Sync software that sync your data and email with your VZW account, to restore that, you may need to hard reset your device.  As a Sprint user, I don't know for sure.
    Alan G 
    Post relates to: Treo 755p (Sprint)

  • ACL migration Error : 1210 could not find a domain controller for domain "Test Domain" (Old Domain)

    Hi
    We are migrating from old domain to new domain. Before live migration, we are trying to check the ACE/ACL migration through SubInACL. We are running the SubInACL on a cluster, which is a member of the Old Domain (Test Domain). We are able to resolve and
    ping both Old Domain and the New domain from this cluster machine. We have created a network share on this cluster, which is accessible to all Domain Users of the Old Domain. Both Domains have two way forest level trust. we are trying to migrate
    the ACL of this share (\\ClusterMachine\testshare$) to the new domain using SubInACL. We are trying to run the below command to get it done.  
    subinacl /outputlog=C:\Users\Administrator\Desktop\Migrationlog.txt /subdirectories
    \\ClusterMachine\testshare$\*.* /migratetodomain=OldDomain=NewDomain=mappingfile.txt
    Mapping file contains : Domain Users=NewDomain_Users
    But we are geeting the Error that "1210 could not find a domain controller for domain "Test Domain". Error finding domain name : 1210 the format of the specified computer name is invalid. Current Object "\\ClusterMachine\testshare$"
    will not be processed."

    Hello,
    how in detail is DNS set up in each domain?
    Any problems when using nslookup to verify?
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Guidelines on whether we should go for 'domain concept' in SAP BI

    Hi,
      Can anyone share the guidelines/best practices on whether one should go for domain concept in BI implmenetation or not? Ours will be a consolidated global sales warehouse and we do not experience that many data load failures. What are the advantages one gets if one uses domain? When should domain not be deemed necessary?
       Thanks and regards,
    R

    Could you please elaborate what you mean by domain concept?

  • Anyone Seen this Message Before "Configuration changes for domain saved to the repository."

    I'm running into this situation where one of my WLS servers is generating the following
    messages "Configuration changes for domain saved to the repository." This process
    of saving to a repository is causing an issue on start-up. Typically my deployments
    take 2-3 minutes on start-up. They are now taking 10 minutes. I've made no changes
    to my application. I've been able to identify that this process of saving to a
    repository is the main issue of contention....
    Anyone know what the message means? Anyone know how to disable this message?

    This is just WebLogic writing back changes to config.xml, which it does from time
    to time for reasons like:
    - your app deployment has changed.
    - you've reconfigured something in the console.
    etc...
    WebLogic just spins this off into a handy execute thread, so it would be surprising
    if this was causing your app deployment to slow down (how do you know it is).
    In my experience, slower than normal app deployments are usually down to:
    - waiting for database connections.
    - waiting for connecitons to other external resources.
    Remember (in WLS6.x anyway) initialisation is done serially on the main thread,
    so if something's slow, everything gets blocked behind it.
    simon.
    I'm running into this situation where one of my WLS servers is generatingthe following
    messages "Configuration changes for domain saved to the repository."This process
    of saving to a repository is causing an issue on start-up. Typicallymy deployments
    take 2-3 minutes on start-up. They are now taking 10 minutes. I'vemade no changes
    to my application. I've been able to identify that this process ofsaving to a
    repository is the main issue of contention....
    Anyone know what the message means? Anyone know how to disable thismessage?

  • Finding short text description of Fixed values for value range for domain

    Hi,
    When I got to Dictionary: Dispaly Domain and click on tab value range; I get the template showing Fix. Val and its associated short text.
    I want to fetch the short text for a particular fix. val for a domain.
    How can I do that ? What table can I use it ? Or do I need to use some function module ?
    Lets say I want to fetch the short text for a given Fix val. for domain VBELN.
    Please help me out.

    Hi,
    You can use Function Module 'FM_DOMAINVALUE_CHECK' to get the fixed values of any domain.
    Regards,
    Atanu

  • IDOC for domain function

    Hi,
    I am looking for some IDOC for the creation of domain function .
    (Transaction FM_FUNCTION, table TFKB)
    I have not find any yet, do you know how can i fine the IDOC or maybe it does not exist any IDOC for domain function?
    Thank you,
    Regards,
    Zheng

    Function modules for converting SAP codes Domain Function module Currency keys CURRENCY_CODE_SAP_TO_ISO Country keys COUNTRY_CODE_SAP-TO_ISO Units of measure UNIT_OF_MEASURE_SAP_TO_ISO Shipping instructions SAP_TO_ISO_PACKAGE_TYPE_CODE I recommend that you encapsulate the code in a SUBROUTINE <SEGMENT-TYP>_CODES_SAP_TO_ISO.

  • Googling for Apple answers - Language code supplied is invalid

    When I Google for problems, many times an Apple Kbase article is listed in the search results. However, when I click on the link, I'm asked to log into support.apple.com (WHY??? - that is idiotic, if the Google cache has the answer, why do you need to know who I am to show it to me?)
    When I enter my username and password, the only response is "Language Code supplied is invalid." There is no way around this unless you dig the kbase article code out of the link and then login, and then search Apple for the article number.
    Can someone assist me on this?

    Example:
    I go to http://www.apple.com/support/snowleopardserver/
    I click on Setup and Administration, and see the two links and the discussions are not what I want. I click on See all Setup and Administration articles <http://support.apple.com/kb/index?page=search&src=support_site.psp.snowleopard .more&q=Setup%20and%20Administration>.
    I get taken to the login page and get the error. At no point do I have an option to select a language.

Maybe you are looking for