Google images shows 2,400,000 image results but only displays 3,000- NOT a preference issue- why/how to fix

When accessing image searches, such as "typographic resume" I get an insanely large result such as 2,470,000 images. However, after about 3,000 results they stop showing without a notification that similar results have been removed. I have my preferences set as high as they go- it is not an issue. How can I adjust/fix this to show ALL results as I approach them, or the option to load more.
Thanks in advance!

Hello twdockery,
Thanks for contacting Mozilla Support. I think what Chandan_Baba was trying to say is our browser only displays the results that Google gives us. There are no settings in the browser that would limit the amount of search results that you can see.
I would recommend posting your question to google's support. They have a page [https://support.google.com/websearch/troubleshooter/3425345?&ref_topic=3285072#ts=3502652 here] to report issues with Image searches.
Cheers,
Patrick

Similar Messages

I have an ipod touch 4th gen its currently updated on sowftware 6.1.6 but shows its connected to the laptop but only says apple iod not the name of the ipod it wont connect to itunes on the laptop.HELP!!!

I have ran itunes diagnostic tests SEVERAL times and says no ipod,iphone,or ipad found.is it my cord?(because this cord im using still charges the ipod)Or is it the ipod charger port? or my usb ports on the laptop (cause ive tried every usb port,same results).please help!!

Hello, Fuentes94.
Thank you for visiting Apple Support Communities.
If your device in not recognized in iTunes, I would try the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails. I have to open each one to see what photo it is. This has just recently started to happen.

My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails. I have to open each one to see what photo it is. This has just recently started to happen.

I made sure the 'Show Icon Preview' box was checked. This is about all I can do, really, Frank, as i don't know enough about the workings of these machines to start fiddling about.
Strangely the images show as previews in some folders, yet not in others, even though they come from the same sources (my camera and my phone).

All my photos are importing out of order. For example, if I have images 1,2,3, and 4.., the order they show up in is 2,1,4,3. What could cause this and any ideas how I fix it?

All my photos are importing out of order. For example, if I have images 1,2,3, and 4.., the order they show up in is 2,1,4,3. What could cause this and any ideas how I fix it?

One thing, don;t think of them as being imported in any one particular order.
The order of the images is completely fluid, you can change it anytime you want to suit your needs at that particular moment.
As Léonie showed you select the order you want to see the images in by selecting the item you want to sort on in the pull-down.
The only time fluid sort order can be a problem is when you export groups of images. If you put the images into a particular order in Aperture when you export them and view them in the Finder the order they are in may very well be different. In this case you could give names to the images that include a sequence number or index.
Then when they are viewd in the Finder they will be in them same order they were in in Aperture.
regards

HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimet

Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
Thanks

I have same issue - have you solved this yet?

Recently when I search for things in the top right search bar in iTunes, the results show up but I cannot click on them. Any ideas on how to fix this?

Recently when I search for things in the top right search bar in iTunes, the results show up but I cannot click on them. Any ideas on how to fix this?

Go to this address: http://mycroft.mozdev.org/search-engines.html?country=AU
Item 24 lists 3 installable major search engines for Australia.
You can also restrict your search in Google by including ''country:au'' or ''location:au'' or ''city:perth'' (for example) in your search terms. Example: ''city:sydney plumbers'' in the Google search box will list plumbers in cities named sydney.

Hi, new ipad2 user. Recieve some emails that should have images but in their place are question marks. any advice on how to fix this would be great. thanks alot..brad

Hi, new ipad2 user. Recieve some emails that should have images but in their place are question marks. any advice on how to fix this would be great. thanks alot..brad

On your iPad - go to Settings>Mail, Contacts, Calendars>Load Remote Images>On. Try that first.
You can also try a reset. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the mail and all other apps. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

Consider running your Adobe and AppleWorks software in Snow Leopard (with Rosetta) installed in Parallels in Lion or Mt. Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

When I go to About This Mac and click on Storage it shows 421.93GB as Other. This only leaves 46.85GB of 499.25GB free. How do I find out what this "Other" is so I can remove the stuff I don't need?

When I go to About This Mac and click on Storage it shows 421.93GB as Other. This only leaves 46.85GB of 499.25GB free. How do I find out what this "Other" is so I can remove the stuff I don't need?

What kind of use do you make of your MBP? A lot of photo or video? If so, you may be storing a lot of large files. Look at Finder and see what the file system looks like. Do you have large libraries of data files associated with applications?
You may want to think about an external hard drive to use for backups and data storage, you can point applications to the external drive as the default storage location.
A good source of external drives at a reasonable price is the Mac specialist, OWC, http://www.macsales.com
I bought their Mercury Elite Pro 2 TB dirve last September and set it up to use part for Time Machine backup and part for other work space. Setup with Disk utility into two partitions is very quick and easy. Just remember to format as Extended Journaled with GUID partition table. Setting the partition sizes is by using a braphical image on screen in DU so it is like falling off a log, so easy.

I have a mac book pro with os x 10.5.8.......sometimes will not load google or yahoo, or any other search engine, but will load regular sites.....why is this?

i have a mac book pro with os x 10.5.8.......sometimes will not load google or yahoo, or any other search engine, but will load regular sites.....why is this?

Check System Preferences - Accounts
Choose you account - login items: If iTunesHelper
shows up - remove it it will prevent re-installation.
It did not have iTunes in the list, just mail and iCal alarm. Deadlines and emails are vital in my home office.
Now that I think about it, adding Mail to the list was the only thing that I had changed to the computer when this happened, but I can't imagine how that would alter permission to install on the OS.
Eric
Note: I saw a G5 1.2 for $1,500 CAN. I was tempted.

HT1498 I rented a movie and it does not show up on my apple tv but is in my video app on my phone. How can I watch it on my tv

I rented a movie and it does not show up on my apple tv but is in my video app on my phone. How can I watch it on my tv?

A movie rented on an iPhone can only be viewed on an iPhone. If you want to view on TV you need to rent directly on ATV or via computer (and stream using home-sharing)

Google -- images found 57,800,000 results but only 30 or so showed up. How do I view more images? I like the older firefox better: I could scroll through hundreds of images.

I like the old firefox much better. When I go to Google --> images and type in "spider", Google tells me that 57,800,000 images were found, but only 30 (or so) are displayed now and there doesn't seem to be a way to access more images. Prior to the upgrade, I could scroll through page after page of images to find the best image for my needs. Tools --> options didn't provide any solutions.

rimsx: Thank you once again for the ideas. No error message is generated. I did try disabling all extensions to see if that did anything, too, and restarting firefox.
I work on a government computer, so maybe it's a problem getting through our firewall! Who knows? Chrome and Internet Explorer allow me to search through pictures, though, so I've got other options. For some odd reason, I was a little partial to firefox.
The way things work around here is that I can try using firefox again in a few months and everything will work perfectly!!!!
Once again, thank you for taking the time with me. You've been very kind and helpful.

The curser includes a text box from a previous image or link when the curser is positioned on the side of the page. i click and it goes away but only to return again on the next launched page. how do i get rid of this?

the cursor includes a text box from a previous image or link when the cursor is positioned on the side of the page. it will mainly happen when i hit "back" from the page i was on. i click and it goes away but only to return again on the next launched page. i also keep several tabs open and it will carry over to any one of them i go to. how do i get rid of this?
== This happened ==
Every time Firefox opened
== when i upgraded to most recent version 3.6.8

A number of extensions can cause that problem, you'll need to do a little troubleshooting to find out which extension is causing that to happen for you.
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Change image size (but only one value)

Is there a way to resize an image using Automator but only change one of the values? Example, I have images (.jpg) that are 1440x1080 but I want to change them to be1920x1080.
Dual 2.7 G5/ Dual 2.0 G5 Mac OS X (10.4.6) 30" Apple Monitors, Final Cut Studio

I am exporting a still image from a HDV timeline in Final Cut Pro. The problem is that the video originally is 1920 x 1080 but when you bring it into FCP it makes it 1440 x 1080. While editing, FCP makes the video look like the original resolution, but when a still is exported it looks smashed in from the sides. Bringing it in to Photoshop I just change the resolution from 1440 x 1080 to 1920 x 1080 the picture looks like the original video resolution. I offen times have several stills and I was looking for a quick way to change them quickly. I work with our police department and get various videos to make still images, then they email the pictures to other police agencies. Our countywide drug enforcement agency is going to get a new video camera and I think they should get a HDV camera, the stills from HDV is much better that from regular DV video.
Dual 2.7 G5/ Dual 2.0 G5 Mac OS X (10.4.6) 30" Apple Monitors, Final Cut Studio

Results page only displays partial record

Hello everyone: I am new to this forum and would like to
request some help. I have searched and searched but cannot find the
answer to my problem on this forum or others.
I problem is as follows;
I have a results page which displays the complete version a a
single news story. I am pulling the story with a simple URL
Parameter. The PHP tage for the affected field contains a simple
nl2br statment and I am not using any complicated queries to pull
the data.
When I update the record from the update page I get no errors
of any kind, but when I load the page that displays the updated
record, the contents of the field in question is trucated.
I cannot see any problems with any of the code and I am quite
baffled by it.
Here is the code for the record display
<?php echo nl2br ($row_rsNews['story']); ?>
And this is the code for the update action
<?php
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = (!get_magic_quotes_gpc()) ?
addslashes($theValue) : $theValue;
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" .
htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_update"])) &&
($_POST["MM_update"] == "updatenews")) {
$updateSQL = sprintf("UPDATE news SET `date`=%s,
subtitle=%s, title=%s, story=%s, image=%s, thumb=%s WHERE id=%s",
GetSQLValueString($_POST['date'], "date"),
GetSQLValueString($_POST['subtitle'], "text"),
GetSQLValueString($_POST['headline'], "text"),
GetSQLValueString($_POST['story'], "text"),
GetSQLValueString($_POST['image'], "text"),
GetSQLValueString($_POST['thumb'], "text"),
GetSQLValueString($_POST['id'], "int"));
mysql_select_db($database_ifbdb, $ifbdb);
$Result1 = mysql_query($updateSQL, $ifbdb) or
die(mysql_error());
$updateGoTo = "news_list.php";
if (isset($_SERVER['QUERY_STRING'])) {
$updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
$updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
$colname_rsNews = "-1";
if (isset($_GET['id'])) {
$colname_rsNews = (get_magic_quotes_gpc()) ? $_GET['id'] :
addslashes($_GET['id']);
mysql_select_db($database_ifbdb, $ifbdb);
$query_rsNews = sprintf("SELECT * FROM news WHERE id = %s",
$colname_rsNews);
$rsNews = mysql_query($query_rsNews, $ifbdb) or
die(mysql_error());
$row_rsNews = mysql_fetch_assoc($rsNews);
$totalRows_rsNews = mysql_num_rows($rsNews);
?>
I would truly appreciate any help this group can
offer.

Hi Gunther:
I am really quite embarrassed, about this but I think I found
the problem...
I had a look at the table configuration in MySQL
Administrator, and there was the problem staring me right in the
face.....
The field 'story' was set to VARCHAR(255) ! I reset it to
TEXT and all is fine now!
Please accept my sincerest thanks for your help. Your
suggestion to check if I was using a textarea is what led me to
check the datatye again. I have no idea how it got changed but I
now know where to check first if it happens again.
Thaks a ton!!!!!

Google images shows 2,400,000 image results but only displays 3,000- NOT a preference issue- why/how to fix

Similar Messages

Maybe you are looking for