Google map not fully drawing
this is happening more and more frequently: google map isn't fully drawing a map for a given area. This is happening in both wi-fi and 3G contexts.
Any ideas?
When I've experienced that, it was usually due to carrier problems with cellular data that resolved themselves with the next tower or within a day or two. I've not experienced it using wifi.
Try shutting down the Maps app...
Double tap the home button to bring up the Recents List
Tap and hold any icon
Press the red to delete the Maps app
Press the home twice button when done.
If still a problem, try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Similar Messages
-
Google maps Not available in UAE
Why google maps Not available in UAE?
We will not buy Iphone 5 if we cant get Google MapsTell Google. This is a Technical support forum for the iPhone. There is no one from Google here.
-
User Mapping not fully available
Hi, each time i want to do a user mapping i have the following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 09:43_09/11/04_0002_1358150
See the details for the exception ID in the log file
This is the message i have found at the server log:
#1.5#0008541F9918004D0000006E00000CF80003E872B1EAA51E#1100004239000#/System/Server#sap.com/irj#com.sap.portal.portal#Administrator#281####f126dea0324c11d98bd10008541f9918#PRT-Async 0##0#0#Error#1#com.sap.portal.portal#Java###Exception ID:09:43_09/11/04_0002_1358150
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component class : com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent
User : Administrator
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:376)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:389)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:408)
at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent.doContent(UserMappingAdminComponent.java:137)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 7 more
Caused by: com.sap.security.api.umap.UserMappingNotAvailableException: User Mapping not fully available.
at com.sap.security.core.umap.imp.UserMappingDataImp.storeLogonData(UserMappingDataImp.java:545)
at com.sapportals.portal.prt.component.usermanagement.UserMappingDataModel.saveLogonData(UserMappingDataModel.java:508)
at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminDataModel.saveLogonData(UserMappingAdminDataModel.java:179)
at com.sapportals.portal.prt.component.usermanagement.UserMappingComponent.doHandleHTMLBEventSave(UserMappingComponent.java:157)
at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:231)
... 11 more
I have redeployed com.sap.security.usermapping.par.sda but nothing happens.
Someone knows how to solve this problem?
ThanksHello Pablo,
Do you know where I can download the "SAP JAVA Cryptographic Toolkit"?
I've tried to download it from service.sap.com/download under-> "Download SAP Cryptographic Software" but it seems that it's not in there.
Thanks in advanced,
Kobi. -
User Mapping not fully Available Error
Hi
while connecting from EP to Sap R/3
created folder in System Administration and System object as Dedicated
system name: sapsystem - next - finish
selected propety category :Connector
AppHost : 101.110.110.105
Remote Host : 3
SAP Client : 800
SAP SYstem name : global
SAP SYstem ID : 00
SAP Server Port : 3200
System TYpe : SAP_R3
SAVE
Property Category : usermanagement
logon method - UIDPW
user mapping type - admin,user
SAVE
System alias as (sys1)
User Administration - UserMapping- search
Administrator in Users - start - edit-
System alias - sys1
user - sapuser i.e( R/3 server)
password - xyzabc
SAVE
then raising error Portal Runtime error
User Mapping not fully Available
with Exception id
Regards
RakeshHi,
First you must import sap crptographic toolkit from help.sap.com, following link: http://help.sap.com/saphelp_nw2004s/helpdata/en/04/d246215f1d4f588d1d9c49391acb01/frameset.htm
Here be careful to follow all the steps, have a look at the link and the subt topic deploying crptographic toolkit.
Onec you have done that, restart the portal and related services.
Now it is possible that you might face other new probles or exceptions.
In that case you might need to update your jce files etc.
Please refer to the sap note: 796540
in that case -
"User Mapping not fully available" error in EP6 SP9
Hi,
I am trying to set up a user mapping in EP6 SP9
I have created a system (usig the "Dedicated Application Server for R/3 System" template, not sure if that is correct but I didn't think it would matter),
and an alias and everything seems fine until I try and create the mapping itself
In the "User mapping" window I click edit of the user I want to map, that works
I then type in a username and password (and domain since I have added that property)
When I press "Save" I get the error below
Anyone know what might be wrong?
Vin
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 02:20_07/01/05_0006_31293550
See the details for the exception ID in the log fileHi Vincent,
I installed the SP9 preview yesterday and had exactly the same problem. However I think I found a solution. Try the following:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
Hope this works for you as well!!
Best regards,
Markus -
Street View (google maps) not working on Firefox with SNA
I have a problem with Firefox when trying to use Street View in Google Maps. It basically kills the browser by being extremely slow. Now, this happens only when using SNA acceleration (default), but not with UXA or GLAMOR (just removed on latest update or xf86-video-intel). Everything else works fast and good with SNA, including WebGL in Firefox. Moreover, with Chromium I don't have this issue: Street View works fine with SNA.
This is an Intel based laptop with Gen5 Intel graphics (and in case it matters, I use KDE desktop):
# cat /var/log/Xorg.0.log | grep SNA
[455944.801] (II) intel(0): SNA initialized with Ironlake (gen5) backend
Anyone else noticed this? Any idea of what can be the problem?I have a problem with Firefox when trying to use Street View in Google Maps. It basically kills the browser by being extremely slow. Now, this happens only when using SNA acceleration (default), but not with UXA or GLAMOR (just removed on latest update or xf86-video-intel). Everything else works fast and good with SNA, including WebGL in Firefox. Moreover, with Chromium I don't have this issue: Street View works fine with SNA.
This is an Intel based laptop with Gen5 Intel graphics (and in case it matters, I use KDE desktop):
# cat /var/log/Xorg.0.log | grep SNA
[455944.801] (II) intel(0): SNA initialized with Ironlake (gen5) backend
Anyone else noticed this? Any idea of what can be the problem? -
Google maps not working with symbian belle upgrade
guys after recent upgrade with symbian belle google maps stopped working is there any problem will belle dose it support google maps 4.1.1
For those people still can't get Google map to work on Belle after the Wifi trick, a hard reset finally fixed mine! (No, a soft reset did not fix mine, but you should try it first.) Yea, it's a pain in the butt having to reinstall some apps and reconfigure preferences. But my phone also runs smoother and the battery lasts longer, as least it seems. I still need to turn on Wifi for Google map to start.
Detailed steps:
Do a full backup with Nokia Suite, just in case. (If you restore later, do not restore apps & preferences. Otherwise, Google map won't work.)
Put phone in Offline mode to end all calls and connections: Press Hangup > Offline
Try Soft reset first: Settings > Phone > Phone Management > Factory Settings > Restore.
Reinstall Google Maps.
If soft reset didn't work, try Hard reset: Settings > Phone > Phone Management > Factory Settings > Delete data and restore
Enjoy! -
Google Maps not loading on my iMac
I can't get Google Maps to load on my iMac. Whenever I go to a web page that uses Google maps (i.e. http://connect.garmin.com/activity/29817682), the outline of the map loads and the scale, route etc. but the actual background map or satellite image doesn't load, it just sites there with a grey background and the status shows 'connecting to mt1.google.com'
The number on the 'mt1.google.com' may be different as sometimes it is mt0.google.com, but it would seems as though my iMac can't connect to the Google servers.
This happens in both Safari and Firefox and also any third party apps that use Google Maps.
I thought it must have been an issue with my ISP or router, but I have a couple of PC's that connect to the internet through the same router on the same internet connection. These can all connect to Google Maps OK so it doesn't appear to be an issue with the ISP or the router, it is just my iMac that has this problem.
Any ideas how to fix it? It does very occasionally manage to download the maps after about 10 minutes of trying but more often than not it doesn't.
Thanks,
Alan.Thanks William... That has certainly helped with diagnosis. Unfortunately I don't seem to be able to adjust any of those settings within my belkin router.
Switching the firewall off in the router does allows Google Maps (and Google images that I was also having issues with) to load in both browsers and other applications. I'm a little reluctant to do this however as it doesn't really seem like a sensible 'fix'?
Alan. -
Geometry theme and google maps not aligned
Hi guys
Sort of new to this. Here goes!
I have created a theme loaded via mapviewer as .shp file, and it looks great. The problem I have though is that I use google maps as a base map, and they are not aligned.
What have I done wrong - any ideas? Im on OBIEE 11.1.1.7.0 but have just downloaded 11.7.1 which I will install shortly.
You can see a pic showing what is wrong here
Any feedback would be appreciated!
Best regards
JacobYou haven't done anything wrong.
It needs additional config in the database to specify the appropriate coordinate conversions.
This is discussed in detail in other forum posts and a little bit in the blog post
https://blogs.oracle.com/oracle_maps_blog/entry/a_note_on_using_spherical -
Google maps not working properly
Has anyone else noticed this recently. Google maps does not seem to (or incorrectly) locates the wrong addresses from my contacts. It worked fine a week ago. I have noticed on some of the contacts, google will change the address during the search or can't find the address, including my home address which it identified perfectly before. Is this a software issue with google, or an iphone issue? Also in the past when I used goog 411 (free directory), it would send a text with the phone number and a map link so that I could locate the place I got the phone number for. The link does not seem to find the location anymore on the map. I really liked this feature.
I'm glad someone asked this question!!! I'm dealing with the same crap...
-
E71: Why does Google Maps not use GPS and track my...
Why is it that Google maps only gives me a GPS signal accurate to 60-2000m. (depending on where I am)
Nokia Maps 2.0 would follow me down roads and footpaths, but Google maps just gives a rough approximation inside a large circle. My friend had an N95 Black and now an N97, and has testified to the exact same problem.
If I could get Google Maps to work with my GPS I would probably delete Nokia Maps, as it is otherwise mostly inferior.
(I've gone through the laborious process to download Maps 3.0 and it is pretty rubbish to be honest - big, bloated with inferior maps)
Message Edited by alexjholland on 24-Aug-2009 05:07 PMGoogle Maps can be set to use your GPS if your phone is equipped with it.
Simply run Google Maps...
Options > Tools > Use GPS (check it or uncheck it for on and off, it toggles)
Current version is 3.2.0 which supports layers and Latitude.
The good thing is that it will get a cell tower lock (where supported) first before it establishes a satellite lock so you get a position, albeit approximate, faster.
You can tell it has established satellite lock when a small box on the top right corner of your app shows you "GPS active (x)" where x = number of satellites locked.
Unfortunately, it does not seem to support the magnetometer on the newer phones yet for compass heading.
Good luck.
Message Edited by mouserider on 25-Aug-2009 07:53 AM -
Google map not loading in Safari
My embedded google map will not load in Safari. Will load in all other browsers just not Safari.
Google maps use embedded HTML from Google to render content served by Google.
If some of your users can't see the google map, it could be a problem connecting to the google maps site, or a browser setting that prevents google maps from displaying.
Google has some troubleshooting tips on their site:
https://support.google.com/maps/answer/18529?hl=en&ref_topic=3311560 -
I installed 3.x.16 and then installed 4.0 .
Now my google maps is not working. Main map page doesn't load.
One suggestion was to start-run firefox.exe -profile .
First time I did this a message came back: 'missing or invalid profile' .
Second time no message about profile, but the google map failure persists (main map page faisl to load).
Can you help?
Thanks!
[email protected]Thanks TreoAide....
I Did a Reset All, Before I Got Your Post, as I Was Worried that Waiting Past the Scheduled BackUp Profile Time, Might Mess Up the BackUp Like Using BackupBuddyVFS on PalmOS.
If You Could Clarify If There is a time Limit the Profile Needs to Be Restored By.
Thank You For Letting Me Know Which Reset To Use, In Future, if I have Difficulties.
All My Applications, Except One (Expess News, I think, as I accidentaly cancelled before it got to a setting window, and know says updating, or a circle turning (I Think).
Before Reset, I Copied Photos, etc, to Laptop, After the Reset, I avoided messing about, but connected WIFI.
At This Moment, I Have Hotsynched WIFI With Palm Desktop 6.2 Access, Contacts to Contacts, and Memos and Tasks to Echo Memos and Echo Tasks, Successfully, And I Am Currently Hotsynching nearly 8500 Appointments with Notes over a Ten Year Period, Which appears to be working and am around three quarters of the way through, and has taken a number of hours, maybe 4-6 but still a quarter left of the appointments. I Am Happy, though, because this time, Echo Appointments did not stop working after 2 or 3 k, as likely works better due to cleaned up Pre, or Improvements that were promised by Chapura for the error.
Thanks Again, and All the Best....
Ralph :-)
PS Sorry for Typos. -
Aperture 3.4.1 Places google map not there
The google map interface is no longer appearing in my Aperture 3.4.1 on osx 10.8.2, it's just a grey screen. I can control click to assign new places, zoom controls do not work and I cannot change from sat./terrain/road. Any suggestions as how to get it back? I already deleted the com.apple.aperture.plist file but nothing happened...and I'm connected to the internet.
Thanks in advance...I could not get to work since Aperture 3.4 either. Zoom out now seems to stop, when the image fills the window.
As a work-around, select more than one image in full screen mode, and you can zoom out to 25%.
Or put the image on a Light-Table; then you can zoom out to really small thumbnail sizes.
Regards
Léonie
Four image in Full screen view selected, zoomed in out differently (25%, 25%, 100%, 200%), for example: -
I've been using firefox forever, use it with google maps, mostly with earth view and suddenly, it shows a diagonal mirror image of the map from the bottom right corner to the top left. Google maps in Chrome works fine and maps in Google Earth also work fine.
We are aware of this issue and will be releasing a Firefox 37.0.2 to correct this within a day or so :)
Maybe you are looking for
-
Upload/Read Documents from SAP-CRM to/from SharePoint
Hello , We have a requirement to upload documents from SAP CRM to share point(select the document from the desktop and pass the data to sharepoint server) , the user should also be able to view the documents located in Sharepoint. There are web metho
-
Can I query WMI using Data Collection Form ZCM 11 Sp2
I'm very new to ZenWorks and I'm trying to query WMI from the Data Collection Form in an admin defined field. I read somewhere that you can query WMI in a similar fashion to querying a registry key but not getting results. Any help would really be ap
-
Handle special characters in xml
Hi, Our end users tend to copy the description text from Word documents to pdf form and submits it. If that text contains any special characters, its getting carried to the extracted xml. In the next step, when I try to assign a task to user with t
-
Transformation is not getting Active.
HI In DEV system , the transformation from Data source to Info source is in Active.when i press on change button .The transformation is in INACTIVE...Then i want to make it in active .....its not getting ACTIVE...showing not executable ...AND display
-
Does anyone know how to let Adobe know that their web site has an error on it? The Windows and Mac links are reversed on the DNG download page. If anyone knows how to tell them, please do so.