Google Map wrong - any way to get it corrected?

I just got an early Christmas present, an iPhone. Of course the first day I had to try and see my house on Google Maps. I can not get Google Maps on the iPhone to find my address. I have three choices for the name of the city. Officially I am in White Bear Township, MN. My mailing address is White Bear Lake, MN and the zip code is linked typically with St. Paul, MN. On the Google Maps website it does not find my house using White Bear Township but comes up perfectly with both White Bear Lake and St. Paul. On the iPhone addresses using White Bear Township are not found at all and the other two go to a different one-block long Ridgewood Ave in neighboring Vadnais Heights. That street doesn't even have my house number so it places the pin mid-block.
I have been looking for a way to correct it or 'move the pin' but there does not seem to be a feedback mechanism on either the iPhone or the website.

I realized that this got marked answered when I found a reply in another topic that I posted to. http://discussions.apple.com/thread.jspa?messageID=6197729
The answer allows correction on the web site but I may not have waited long enough for it to populate to the iPhone. I will have to see if moving the pin on the web fixes it on the iPhone search after a little more time, like a day or two.

Similar Messages

The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had

The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had

maggielou wrote:
I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed. However, a few of the recent pictures have shown up on my phone.
IHow could I get these from my MacBook to my phone?
Thanks again.
When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups. You can't view the backups.
Look at the two links I provided.
You still didn't answer any of my two questions I asked.

HT1751 I plugged in my IPhone and it tried to sync with my computer, I typed in my password wrong and now most of my pics are gone. Is there any way to get them back?

I lost most of my pictures by typing in my password wrong after plug in. Is there any way to get them back?

When you say you were "trying to run your computer in admin mode," what exactly does that mean? What did you do? Details here are critical. It's possible you are just logged into the wrong account, or something simple like that, and your files are all still there. On the other hand, it's possible they're all gone... in which case, what kind of backups do you have?

I accidentally trimmed the wrong part of a video from photo booth, is there any way to get it back?

I accidentally trimmed the wrong part of a video from photo booth, is there any way to get it back?

I'm not sure about older versions, but in Pages 3.x (OS X 10.9.x) select File > Revert To > Browse All Versions. Hopefully there will be an earlier version that you can "revert to".

Is there any way of getting back from a wrong clicked free trial to add my serial number correctly?

Hi
On purchasing a new imac I copied the apps across & on opening CS6 was requested to load serial numbers, through tiredness I added the seria; number from CS5.5 and therefore not recognised for the CS6, then when about to enter again through tiredness I must have clicked free trial and now have the CS6 in that format.
Is there any way of getting back to that initial box to load the correct numbers & get out of trial as although it works I need it set up correctly?
Any help appreciated

Sorry, cant see this visible on menu or drop downs, did run through all menus before posting, could just be tired from 3 weeks straight.
If this is not an option does that mean I am set up ?

I have an iPod whose contents I want to transfer to a newer Ipod. At some stage I lost the music files from my library. Is there any way to get them back from the older iPod and put them onto the newer one again? I stupidly synced the wrong one.

I have an iPod whose contents I want to transfer to a newer Ipod. At some stage when I thought I was syncing correctly I wasn't so I lost the music files from my library. Is there any way to get them back from the older iPod and put them onto the newer one again?

Have you not got a backup of your content on, for example, external drives ? If not then you could have a look to see if any of the utilities mentioned in this old post still exist and work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893

Any way to get prior (non-iOS 6) version of iMovie?

Just saw a demo of iMovie and really liked it. I headed to the iTunes app store and was seriously disappointed to find that I could only use iMovie if I updated to iOS 6. That isn't going to happen. I use Google Maps every day and will switch to an Android based system before I will upgrade to iOS 6.
So, is there any way to get the prior verion of iMovie that works on iOS 5.1.1 or is Apple just trying to force people to downgrade to iOS 6? My guess is the latter.
Thanks
David

@hpr : I was running the dev version because it provided a LOT more stability with Chrome/Flash (while I waited to receive my "free upgrade to mountain lion" email from apple), and it also addressed the Retina font-rendering issues. Latest official Chrome release was super crashtastic for me -- multiple kernel panics daily. Apparently this is/was An Issue for the new rMBP + Chrome + Flash. Honestly, though, this thing reboots so freaking fast it wasn't even *that* much of an issue.
Finally jumping to Mountain Lion right now...hopefully that'll stabilize things. If not, back to the dev version I go. Chrome has spoiled me - I just can't deal with Safari anymore.
@Justan : Yeaaaaah, I figured that out after I installed it. Ah, well.

Federal court website gives a .pl document which opens as garbage until we manually change it to .pdf, is there any way to get Firefox to do this automatically?

I am using a Mac. When downloading a document from the federal court website using Firefox, we get a .pl document which opens as garbage (in TextEdit) until we manually change it to .pdf, which causes it to open just fine (in Preview). It used to work fine, giving a .pdf document every time, but apparently upgrades to Firefox have removed this functionality. As far as I can tell my computer, an iMac running Mac system OS X 10.10.1, does not recognize the .pl format. Is there any way to get Firefox to automatically convert a downloaded file from .pl format to .pdf format? My friend tells me that Google Chrome downloads these documents with no problem. I would prefer to stick with Firefox but I might have to change if every downloaded document is in an unreadable format.
This is a typical example of what I get when I try to open a .pl document (the pdf version is a one page document using plain English):
=====
%PDF-1.5
%‚„œ”
2 0 obj
<</Length1 15628/Length 10121/Filter/FlateDecode>>stream
xúÌ{i`U∂9∑™∫;kWoYÈtuöK“ÑR@“ F!,Å$ñêÑÑd Çä††¢≤)
¢Ääƒet\FeûNà£Œ∆y3"ÈÔ‹Í|Ûæ˜˝˙˛LUNü{œ›Œ=€=∑i

HI jlawrence1,
Is it possible to associated the pl file mimetype with an application? [[Applications panel - Set how Firefox handles different types of files]]

Is there any way to get around having to use iDVD to burn DVD?

Is there any way to get around having to use iDVD to export FCE to DVD?
I've been trying to burn a FCE2 sequence to DVD. A friend of mine told me all I had to do was put a blank DVD in, click on the icon on the desk top, export the sequence to Quicktime and drag the QT sequennce into the DVD icon and click burn.
Well something happened! But there's nothing on the DVD!! What am I doing wrong? I loathe iDVD. i don't want to author. I just want to burn the project on a DVD. Please advise. Thanks.
Chuck
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)

If you export a sequence at full resolution to can burn it onto a DVD as a data DVD, but this is for transportation purposes only. At full resolution the DVD, especially as it fills up, will not have sufficient throughput to sustain good playback of the material. That's why the material is encoded into MPEG-2 for DVD authoring. If you want to make a DVD for set-top playback it has to be authored to include the DVD format structure. There is no way around that. If you don't like iDVD, take a look at Final Cut Studio, you might prefer DVD Studio Pro. Or you might what to look at Roxio's Toast. It has basic authoring capabilities. Personally I don't think direct playback hardware solutions (except for seriously expensive ones) produce acceptable quality, but that's just me.

When closing multiple tabs, is there any way to get back the option of saving those tabs OR NOT for your next session, within the warning dialogue box itself?

For brief period of time, not in FF4, there was the option whereby when I closed multiple tabs, a firefox dialogue box opened warning me that I'm about to close multiple tabs, '''AND ALSO''' asking me if wanted to save those tabs for my next session, or trash them.
The primary issue IS NOT about saving tabs. The primary question here is about getting THE OPTION back to the CLOSING MULTIPLE TABS WARNING DIALOGUE.
The use case here should be obvious. However, since it is clearly not obvious that different people work in a variety of ways, and neither of those methods of working is "wrong" or "right" I will elaborate: Some people, for whatever reason, it doesn't matter why, want to save all their tabs on some occasions, and on other occasions don't.
This preference varies throughout the day. Therefore it is inefficient to constantly go to preferences and change whether or not I want firefox to open all my tabs from my last session. It is more LOGICAL to place an option in the multiple tab warning dialogue as well, for people whose preference constantly changes.
This option was available for a time in most of the Firefox 3 versions. Is there any way to get back this option in Firefox 4?

Firefox 4 saves the previous session automatically, so there is no need for asking if you want to save the current session.
You can use "Firefox > History > Restore Previous Session" to get the previous session. 
There is also a "Restore Previous Session" button on the default about:home Home page.
You can set the warn prefs on the about:config page to true via the right-click context menu or toggle the value with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Update interupted... Any way to get photos off?

Hi everyone,
This is my first time posting here so if it's the wrong area, I appologize. I did the latest update this morning for my IPhone (I have an IPhone 3G) from the ITunes store.. I'm not sure of the exact number of the update.
I was doing the update before work and I ran out of time, so I brought my laptop with me while it was finishing the update.
As it was toward the end of the update (It had already backed up everything and I guess was putting the new software on), the IPhone came loose from the cord and now all it shows is the ITunes logo and to plug it in. When I do that, it says I have to do a restore to get into ITunes.
Is there ANY way to get the photos off before I restore to factory settings? I don't care about the contacts or anything but my photos. All my photos of my 1 year old are on there and the last time I backed it up was in September. I know I should have more often and I will do it every month from now on... But any help would be greatly appreciated. I don't care if I even have to go somewhere and pay someone to do it..

Hi Thank you for getting back to me. This will be a bit lengthy so I appologize to begin with.
I did not restore the phone before I got back home because I didn't want to take any chances of anything happening with it.
So I got home and I did the restore and back up at home last night (Clicking on Restore since the IPhone in the device menu didn't have the option to restore from back up).
After I restored it, it gave me the option to choose a back up to restore to, which I chose the one from yesterday morning.
It loaded and said on ITunes that the sync or back up was complete and it was safe to remove the IPhone. There was still a bar filling on the Iphone, supposedly loading, still going on the IPhone so I left it connected.
The bar finally filled, but stayed that way for around 15-20 min without going to the main screen, so I disconnected it. Then it wasn't going away so I shut it off.
I turned it back on and it started that load bar again with the apple logo above it. It took a long time and I had to go to bed so I let it go. I woke up this morning and it had gone dark so it seemed like it loaded fine. I clicked the circle button and my wall paper came up and everything, I was very happy! I even went to photos and it showed all of them there, very happy!
The only downfall I saw was all my apps were gone.. Not to worried about that, although if there is a way to get them back, I'd appreciate knowing that also..
But then I went to the camera and then it said rebuilding library (just so you know I have ALOT of photos on here, over 4500.. No music, just a ton of photos, which I am going to take off tonight hopefully.) So it took forever.. Then it turned off before it finished. I turned it back on and I went to photo's (instead of camera) and it said updating library and the load line is crawling.
So ever since I first looked at the pictures this morning, I haven't been able to view them again. I tried hooking it up to my laptop during break this morning to start transfering the photos, but it doesn't give me the option to import pictures like it used to (outside of ITunes, as if it were an external hard drive.).
So that's where I am at... Sorry for the lengthy response, but I figured it would help if you knew everything. At this point I just want to get the pictures off safely and then I don't care if I wipe them off after that.

I made a mistake and deleleted all the sent messages in my mail box is there any way to get all the messages back?

and of course then i deleted everything that was in the trash before i understood that i made the wrong decision ... any way to get the messages back from Apple Servers?
Of course, it's not the real truth, the real story is that i made that on my wyfe's computer and i'm now in real trouble with her!

Unfortunately, I use Time Machine on my own computer (on my nas) but I never been succesfull trying to use Time Machine on the same Nas with my wife's computer ... so Time Machine is not the solution ... anyway that Apple could help? My life will be painfull for the next days !

My old computer that ran on Mavericks was stolen and my new computer runs on Yosemite. I don't like the new iMovie (10) on the Yosemite version. Is there any way to get the old version (9) back?

My old computer that ran on Mavericks was stolen and my new computer runs on Yosemite. I don't like the new iMovie (10) on the Yosemite version. Is there any way to get the old version (9) back?

I read his question the way I answered it.
If that is wrong then he can clarify his question.

Is there any way to get your pictures back after updating to maverick?

is there any way to get your pictures back after updating to maverick?

Is Aperture not launching at all? Then update Aperture like Ernie recommended. You'll need version 3.5.1, or 3.4.5 with Mavericks. If you have any Aperture 3 version, you should be able to update for free.
After updating Aperture, make sure you have a backup copy of your Aperture library, before opening it in the new version. Click the Aperture library, to open Aperture on your library.
Or, is the problem, that Aperture opened on an empty library? Then check the file system on the drive with your Aperture library. It may have the wrong formatting. Then move your Aperture library to a drive formatted MacOS Extended (Journaled). Click the

So Wat to do? Is there any way to get out as a single swf file from captivate.

Dear friends,
I am beginner in Adobe Captivate. We have a E-learning
project. We are using Dockers as our LMS. Previously we were using
Flash for all. Now we are trying Captivate for better and faster
results. I have few swf files and i inserted al files in Captivate
and i published. So instead of getting single output, am getting
all the swfs, skin swf and html file. Html file is accessing all
swfs and works. But it is not working in Dockers. Single swf will
only work in Dockers. So Wat to do? Is there any way to get out as
a single swf file from captivate. please Help mee.
Thanks
Flashlover

If 'Dockers' cannot handle a .zip file as the content and
instead
requires a single, uncompressed content file, then it is not
SCORM-compliant. The SCORM specification requires the LMS to
handle a
'pif' file (most common is .zip) which contains the lesson
and the
required manifest file. If Dockers doesn't support that then
you can't
do SCORM-compliant content.
Erik
loverflash wrote:
> Dear friends,
>
> We are using
> Dockers as our LMS.
> So instead of getting single output, am
> getting all the swfs, skin swf and html file. Html file
is accessing all swfs
> and works. But it is not working in Dockers. Single swf
will only work in
> Dockers.
>
> Thanks
> Flashlover
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Google Map wrong - any way to get it corrected?

Similar Messages

Maybe you are looking for