Google Maps 5.0.0 : 3D Nav.

The New 5.0.0 is out Folks its Got 3D Nav. Compass and Improved Map Caching And Offline Navigation Rerouting if U lose Your Connection. Download It See What U Think an Give a Post About it . I' ve Got it an I Like it Alott Especially the Compass Mode. Devices with 2.0+ Can Use it.!

Hi and welcome to the forums!
Go to options, advanced options, applications.
Highlight Google maps and select disable compatibility mode.
Edit permission set all to allow. Battery pull, then test it.
Thanks,
Bifocals
No data will be lost when doing the following: pull the battery while the device is ON.
Replace after a minute, Let the device reboot 1-3 min, see if the problem is fixed.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

1.3.5 update - lookup map from Contacts doesn't work for Sprint Nav or Google maps

Is anyone able to tap on a contact's address in order to launch Sprint Navigation? Or even Google Maps? In my case, Google maps alway navigates to *my* address, not the contact's address I tapped on.
Worse, my Pre hangs on the Sprint Nav splash screen when choosing that option -- similar to what others are noticing. I copied this from another forum, as it describes my problem as well:
I updated Default Applications to launch Sprint Navigation for addresses. It certainly launches from an open Contact, but locks up on the splash screen. It never displays a map (nor anything else), and the menu doesn't function. Completely unresponsive. If I launch the app stand-alone, it works fine, so Sprint Navigation doesn't seem to be broken. It just doesn't work launching from a contact address.
I've switched the default app back and forth between Google Maps and Sprint Navigation, and did a couple restarts to no avail.
Regards,
Paul
Post relates to: Pre p100eww (Sprint)

Thanks for the feedback and link to confirm this issue. I confirmed what the other fellow wrote on that thread:
if you already have Sprint Nav open, then click the address is goes fine.
I also "fixed" the issue in which Google maps loaded but always went to *my* location. I fixed this by exorcising the unofficial Google Latitude version of Maps from my Pre.I picked up this version by following a hyperlink to the beta Latitude a number of days ago, and ever since it had replaced the regular G Maps. I was able to clear Latitude off my device by pointing the browser to maps.google.com to reload the original flavor.After that, I am able to properly launch G Maps from a contact's address field. Whew!
Regards,
Paul
Message Edited by paul_flory on 12-30-2009 11:04 PM

Add the google map.

Good day all!
I've been trying to add the google map to a flash site. I've
got it on there but it's in the wrong place it sits on the top of
the page and I need it to be centered. Under the logo and nav bar.
You can see it here>
http://thedesignport.com/Doughboys/Location_Page.html
Any help? And I would like to add a from/ to search. Can't
find anything that helps online.
Thanks all!

Hello, I am having a similar positioning issue - did you ever
figure this one out?
Please let me know how, thanks
Richard

Charge overheats if Google Map is used while the phone is being charged.

I've encountered a strange problem:
The Charge does NOT overheat when using Google Maps on battery power.
The Charge does NOT overheat when being charged(either via AC adapter at home or DC adapter in car),
if Google Maps isn't open.
When Google Maps is open(GPS on) and the Charge is being charged, then the phone overheats and
shuts itself off after a warning message appears.
Verizon replaced the battery 3 times with brand new Samsung batteries. The phone was hard reset each time.
I ended up trying it on the Verizon corporate store's Charge on display. Turns out that the problem can be
reproduced in store.... Does anyone else have this problem?

I don't know why this problem has been marked "Solved". It is not solved.
I have the same problem when using Google Navigation in the Samsung car dock and the car charger. I started off with a fully charged battery because posts on other sites have complained that the Charge cannot keep up with the power draw of the Google nav app while using the car charger. About an hour into my trip, I got a message that the battery was overheating and to unplug the charger which I did. I then had to contend with the screen going out because it was running on the battery.
I let the phone discharge to about 70% then tried the car charger again. Within a few minutes, I got the same overheating message. It was not an overly hot day and the car A/C was set at 68 degrees. THIS IS NOT ACCEPTABLE. I love this phone, but in the 3 days I've owned it, I've had one issue after another. Dropped Audio to other Verizon customers. Camera flash causing the phone to reboot. And now this issue. I hate to return it, but I'm running out of time.
Rich

Is Google Maps "Send to Car" accesible in Safari?

Ok, so a little explanation. As many of us know, the native Maps app does not offer all the features that the desktop browser does for Google Maps. Thankfully, you can navigate to it from Safari on the iPhone (maps.google.com). So what's missing from the native app that I care about? "Send to Car" (http://googleblog.blogspot.com/2007/03/google-maps-send-to-car.html). Several vehicle manufacturers have nav systems that are capable of receiving map locations directly from Google. I have one of those cars and it works when using my desktop browser (search for a location, click on the result on the map, click send in the pop-up, select "Car" on the left then fill in the appropriate details.
If I try to do this on the iPhone, I get the pop-up and the fields for send show up, but I can't scroll to the left to change the fields from "Email" to "Car". It must be something about how mobile Safari is rendering the new window such that you can't see it in it's entirety. I've tried zooming out, etc, and no such luck. Any suggestions would be greatly appreciated. Thanks!
Jeff

Technically, I think what you see when you navigate to maps.google.com from Safari on the iPhone is a mobile optimized version of Google Maps. So, you don't get the full interface that you see on the desktop browser. As such, I wasn't expecting that any option for send would even be available. Since it does appear though, I'm hoping that there is some way to get to the section I am interested in.
After you navigate to maps.google.com on your iPhone, do a search. Once your searchresults appear on the map, tap one of them. I've noticed that the map can be a little "touchy". Sometimes I need to tap the result more than once in order to get the first pop-up. In that pop-up will be details about the search result including the name, address, phone, "Write a review", "more info", etc links. One of the links at the bottom of the pop-up window is "Send". Once you tap that, the new window appears where you can choose where to send. This window is the one I can't scroll far enough to the left on to get to "Car". Interestingly, if you rotate from portrait to landscape, you get pretty close. You basically get a view of the whole "Send" pop-up window - except for the key area at the left where you choose between Email, Phone, Car and GPS. You have to be able to choose the appropriate category in order to get the proper fields in the Send window in order to transmit the map data to the appropriate device type. So, like I said, I can almost get there, but not quite.
Jeff

Google map for searching place and driving aid

I search the place before driving at home in my laptop using google map. this is very convenient.
I bought the windows phone, with the hope that it will be more closer to my laptop, which runs on windows.
but now when I type the URL for google map. it prompts me to install the google map. When I do so it says: " Can't download file Windows phone doesn't support this file type."
On checking with nokia customer support, they informed that we can't install any application on our phone, but the only one that are listed in " marketplace".
They say the Nokia map exists, but that isn't that rich as google maps.
Can anyone help if I can use the map search/ find direction in mobilie?

You have full free sat nav on the lumia why do you need google to navigate or find somewhere ?
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Numbers/Address Book and Google Maps

I would love to integrate my spreadsheet of addresses or my Address Book with Google Maps.
Is this possible? Somehow?
I take a lot of trips across the country and don't always know when I will be driving by my friends. But if I had a map I could glance at to see where they all are, I would know that I could schedule a lunch with a friend halfway or something like that.
I have heard about MapPoint, but don't know if there is anything like this that is free/affordable/non-MS.
Thanks!

Integrating in Numbers would not be automatic. You'd have to format links to assign to each address.
I've seen plug-ins to use Google maps with Address Book. Try a search on MacUpdate or VersionTracker for Address Book.
I think one of the features for Address Book in Leopard is integration with Google maps.

Flash 11.1.102.55 crashes IE8 on Google Maps / street view

Since the Flash update to 11.1.102.55 I have had repeated crashes of my 32 bit Windows XP SP3 system. They typically have happened in Internet Explorer 8, 32 bit version (updated with latest MS patches).
Sometimes the IE8 lock ups can be cleared by using task manager. About 30% of the time, a machine power down/ reset is the only solution -- the screen freezes (mouse won't move, clock stops, Ctrl-Alt-Del won't work).
The machine is a Lenovo Z61p with 3Gb available memory.
I have been able to repeat the crashes by going to Google maps.
Example:
1. Go to Google Maps
2. Look at Arlington National Cemetery in regular view
3. Move the "Street View" stick figure to one of the Panarama photo points. Screen with show photo view
4. In the shrunken lower right corner map view, expand the map view to cover half the screen.
Things may get dicy about now.
5. Try moving the stick figure on the map. OR try expanding the photo to full screen.
I get repeated lockup at this point.

Try using a different browser. I use Firefox which you can download from here: http://www.mozilla.org/en-US/firefox/fx/
If you don't like the "Tabs On Top" layout, you can move them to below the location bar by simply right clicking a blank part of it and then click the menu items called "Tabs on top" to remove the checkmark. Tabs will subsequently appear below. Other tab layout options can be found in this support article: http://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
There are no issues with Google Maps as far as I'm aware.

Google Map Issue in OBIEE - Subject area not getting associated

Hi Gurus,
We are trying to integrate Google map and OBIEE via mapviewer. We have done the following already -
1. Loaded World Sample data from Navteq.
2. Configured mapviewer source and added Google map as a tile layer with the API KEY.
3. Imported one layer (e.g. M_STATES_ABRV) in OBIEE and linked it with BI subject area (tried this step with importing other layers as well)
4. Added background map.
Now , in this step when we add the layer in the map, we select M_STATES_ABRV and change zoom levels. But Once we come back to main screen after Clicking OK, we see the background map is not associated with the subject area. Hence any map view report creation with this subject area fails.
We have the tried the same theme with Oracle Maps (internal type like WORLD MAP or DEMO MAP), it works fine. only Google Map gives this issue.
This was not expected. Please suggest what we missed. We tried with cache clear, tile delete and recreation, service restart almost everything .
We looked into other threads in this community, different oracle support documents - Doc ID 1485088.1,Doc ID 1346805.1 etc and in different internet blogs - where it's easy as child's play, but we are still out of luck.
OBIEE version - 11.1.1.7.140527
Environment- windows server 2008 R2
Please suggest.
Regards,
Krish

I have found the solution: You need to *select* zoom levels for the BI Layer. When a BI Layer is added to a background map, by default no zoom layers are selected. Once a zoom level is selected, the BI Layer will save.

How do I use the "What's Here" function in Google Maps on my Mac?

Being a new convert to Mac I was used to using right-click to access the "What's Here?" function in Google Maps on my old Windows PC. How do I use it on the Mac?

Click on the Up Next icon (ringed in my screenshot):
then on the Clear button:
and Hey presto!

How do I undo software update of v.6 on my iPad. The map ap is useless. I want google maps as I use it more than anything else. Apple map is terrible.

Spent 10 mms trying to say t he new map app is useless. As its the main thing I use on iPad I want my google maps back. Ho can I get this?

Spent 10 mms trying to say t he new map app is useless. As its the main thing I use on iPad I want my google maps back. Ho can I get this?

Safari 8 hover does not work over google map location pins

OS X 10.10.1, Safari 8, Java 8-25
I have always had little odd things not work when using safari on a large % of websites I visit, the latest issues are
no response when hovering over google map location pins, travel site calendars not opening or responding to mouse, drag and drop
show the item being dragged several inches away from the actual pointer, some links don't respond, missing items
or odd layout with print or pop ups going off the screen on some website pages, zooming in and out does not help. I have none
of these issues when using Firefox or Chrome. Been using Safari for 4 years now.

Have you tried a PRAM and an SMC reset? They're longshots, but don't take long to try.
PRAM: http://support.apple.com/kb/HT1379
SMC: http://support.apple.com/kb/HT3964
Have you run Apple Diagnostics from the disc(s) that shipped with the computer?
Since the problem occurs in all browsers, it still sounds like a video hardware or video RAM or maybe a software issue having to do with layers and rendering.
The map layers aren't getting rendered, or if rendered, aren't getting displayed.
Do you have any browser add-ins? Pop-up blockers?
Since you have two video chipsets, it's possible that might be related to the issue.
This non-Apple website talks about switching between chipsets on the various MacBook models so equipped, and points to a free 'donationware' program for the menubar that lets you easily switch between chipsets:
http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-unibody-faq/macboo k-pro-unibody-switching-between-graphics-processors.html
Trying to think of other software that might help pinpoint the problem, does the iPhoto Slideshow 'Shatter' template work? Working properly, it 'shatters' images into several color layers and rotates them in and out to build and deconstruct photos.

Google maps does not work

I have Snow Leopard 10.6.8 on my Macbook Pro. No matter which browser I use, Google maps will not render the map detail - instead it just shows the target location with a letter 'A' or whatever, but the background map is just grey with no features. It makes no difference how long I wait either. I have used the various features in browsers to clear out the 'junk' and have used 'reset safari' when in that browser, Still no joy. I have had the MBP for two years and I expect this simple feature to work as it does on all my Windows PC's and iPhone. I am at my wits end and feel somewhat duped into the Apple world by the triumph of 'form' over function. I want to love my MAC but it aggravates me instead because I spend too much time trying to figure out how to get basic features working when in fact they should work first time without user intervention.
Has anyone got a 5 minute fix for this ridiculous fault please? I cannot upload a screen grab either because (1) this Apple forum wont allow upload of my screengrabbed jpgs of tiffs, or (2) my MBP wont allow it (despite them being within the expected size limit). Another spectacular own goal by Apple.

Have you tried a PRAM and an SMC reset? They're longshots, but don't take long to try.
PRAM: http://support.apple.com/kb/HT1379
SMC: http://support.apple.com/kb/HT3964
Have you run Apple Diagnostics from the disc(s) that shipped with the computer?
Since the problem occurs in all browsers, it still sounds like a video hardware or video RAM or maybe a software issue having to do with layers and rendering.
The map layers aren't getting rendered, or if rendered, aren't getting displayed.
Do you have any browser add-ins? Pop-up blockers?
Since you have two video chipsets, it's possible that might be related to the issue.
This non-Apple website talks about switching between chipsets on the various MacBook models so equipped, and points to a free 'donationware' program for the menubar that lets you easily switch between chipsets:
http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-unibody-faq/macboo k-pro-unibody-switching-between-graphics-processors.html
Trying to think of other software that might help pinpoint the problem, does the iPhoto Slideshow 'Shatter' template work? Working properly, it 'shatters' images into several color layers and rotates them in and out to build and deconstruct photos.

Using Google Maps Street View on My MacBook Pro

Recently, I have been getting "Plug-In Missing" in the place of a video in a blog post. Also, when I try to use Street View in Google Maps I get a box that tells me I need to install Adobe Flash Player 10 or later to be able to use Street View. Should I try to download and install Adobe Flash Player? What could I use to be able to use Google Maps Street View and/or to play videos?

I found my reply elsewhere - you have to uncheck "contacts" and then recheck it. Kinda idiotic, but there you have it!

Phone numbers are not showing up on craigslist and google maps is not working.

I uploaded the 3.6 version of firefox and although learning a new look and figuring out what changes had been made were doing ok then the other night the power went out it shut the comp down and when my husband started it back up it had him update it again now my first page when I open it shows yahoo instead of ask, and when I use fire fox to open craigslist lots of the post do not have phone numbers showing up on them that does show up if I use internet explorer to view CL. Also, It will bring up google maps but when I put a location in the box to see it on the map and hit the search button it only starts to load the page with the little word loading... in the center above the location search box but then it says it's done. This also does not happen when I use IE. We tried to restore to a previous date (which there were only a couple to choose from, don't know where the rest of them went) but once the comp restarted itself after supposedly restoring it comes up and says it was not able to restore it properly. I did not have any of these problems with the first update to 3.6 but I think the update that was just loaded 3.6.11 or something like that has really messed something up or it's just not right some how.

Issues with phone numbers not displaying properly can be caused by the Skype extension (Tools > Add-ons > Extensions)
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Google Maps 5.0.0 : 3D Nav.

Similar Messages

Maybe you are looking for