GOOgle maps starts to run around the world, the same other maps (Targeo.pl)

Mozilla 18.0.2, Windows Vista.
After short time looking at the map on Google Maps , when I move map, it start to pass horizontally very fast, around whole globe, and I cant stop it.
The same situation with other maps (e.g. Targeo.pl).
Can somebody help me?
Bodek

Try to reboot the computer.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

Youtube not working on Firefox - Lots of people around the world reporting same thing! February 18th 2015.

Just checked Youtube and it's not working, all i'm getting is a black screen with a spinning circle.
Have checked downdetector.com and Isitdownrightnow.com and lots of other people around the world reporting the exact same problem even though Youtube is playing fine for them on other browsers like Chrome.
I'm fully up to date both on my Firefox and Flash and Youtube was working fine for me yesterday.
Is this some Firefox problem? as thousands of people around the world are having same problem.
Thanks in advance.

For other users finding this topic in the future:
1) Enter the config by typing about:config in the adress bar.
2) Enter media.mediasource.webm.enabled and press enter.
3) Right click on it and change to true, for some reason it is set as "false" which makes MSE & WebM VP9 not work properly.
4) Visit: https://www.youtube.com/html5 and check that everything is OK.
5) Try to watch a video. It should work now.

How do I make Google my start page like I had before the update

before the latest update my start page automatically was the Google page which I really liked. Now Firefox 3.6 page comes up which I don't like. How do I go back to the original format? Thanks - Hans

See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols

Why is mobile phone use in USA most expensive in the world for same or lower quality?

I was actually spurred to ask this when I saw what I'm paying for 4 lines and 3gb of data versus what att offers now. Feeling doubly abused.

Try Germany. Their network is heavily subsidized by their government. They also tax you up to 50% of your earnings. Gas there is roughly $10 per gallon. Mathematically I have seen where in most European countries with the same commodities they end up paying the same average when everything is said and done. Just the "pies" look different.

Is there a solution to the most annoying problem in the world (the clipboard cannot be emptied)?

I have tried everything!!!
200b$ company cannot fix a simple copy-paste?!

Maybe the third party causes such an issue.
I saw someone who has the similar issue said:
If you have any remote access software like VNC or TightVNC you may want to uninstall them and try the Excel program again. I had this issue and narrowed it down to the TightVNC program installed
Please have a try.
Wind Zhang
TechNet Community Support

Disallow running multiple instances of the same web start application..

on the client? I have an application that is launched on the client by clicking on the link to the JNLP file. The problem is that I don't want the application to launch twice if the user clicks the link twice. Is there a way to keep web start from running multiple instances of the same app?
I don't want to just disable the button after it is clicked because then the user won't be able to get back in if they need to.
Any help out there?
Thanks,
Melanie

The way I do this is to try connect to an obscure port number on the localhost at startup.
if this connection succeeds I assume the app is already running. otherwise the program continues and registers as a server at that port number.
I actually take this a little bit further by registering a web server at this port (I use the Brazil server), That way if the program finds an instance of itself running it can send a message to the web server and ask the program to do something (like start another window if,for instance you wanted to allow this but only within the same VM).

Does the world traveler kit work on the 60 watt mag safe power adapter

does the world traveler power adapter kit work with the 60 watt mag safe power adapter.

Hi Aiian,
The kit contains all the plug ends needed to travel around the world. the small flat bladed square piece that slides on the 60 watt mag safe charger for use in north america was lost on vacation. I purchased this kit because it appeared to contain two plug adapters that looked exactly the same, one flat blade and one flat blade with holes at the end. when i tried one of the ends nothing happened (no charge).Wondering if it contaians a resistor inside? Mac offered only to replace it if it was faulty, but
I lost mine.

10g graph xml - color of the of the base of x-axis

Friends,
Below is my simple 10g reports graph xml.
What I am trying to find out is
- HOW can I fill the base on the x-axis with any color. Example below
<rw:graph id="CT_1" src="G_1" groups="object_type" dataValues="ocount">

</rw:graph>
In above example depthAngle="30" depthRadius="30" create a 3D space on the base for the bar graph, I am trying to find I can I fill the color on the base which is created by the above settings (for example grey color)
    |    |                                         |    |
    |    |                                         |    |
    |    |                                         |    |
    |    ------------------------------------------|----|
    |   /    how to fill this region        |    /
    | /     with any color created     | /
    | /      by depthAngle="30"         | /
    |/       depthRadius="30"            |/
[PRE]

To change the color of the line itself, you can use the attribute Plot>>Plot Color.
To change the color of the points, you can use the attribute Cursor>>Cursor Color.
To select the color, you should have a color box constant inside the Numeric>>Additional Numeric Constants palette.
This is all in LV 7.0. I'm not sure how it similar it is in 5.1.
One important thing is to place the attribute node inside a case structure which will execute only when your condition has been filled.
If this didn't help you, I suggest you post the relevant piece of code, or at least an image of it (no BMPs, please).
Try to take over the world!

Around the World Travel Map

All, I am trying to create an around the world map, example path: NYC to LAX to SYD to FCO to NYC. The travel path is west but when I select the "Return to Starting Location" option the map is drawn with an eastward line. I would like the line to continue westward, any help would be appreciated. Thanks.

Larry, I am up to date, I was just trying something new and it appeard to work.
If you do this:
Desired Path to Show: NYC to LAX to SYD to FCO to NYC
but instead use
FCO to NYC to LAX to SYD to FCO to NYC to LAX
and then zoom in and set the map, you can have the desired path without showing the two duplicate locations (1st FCO and last LAX) and have the map appear to show a correct path.

How do I reset my home page as Google, sans that fox wrapping his arms around the world??

I LOVE Firefox to death, but I don't know how to set my home page to Google or Facebook or ANYTHING...is there some way I can do that? I love the little fox hugging the world, but I'm new at this (just dumped Internet Explorer, thank god I found you!) and would appreciate your help. Thanks a bunch, you guys are SO cute!
xox, Paula DeMarta Mastroianni

-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to Help Menu -> select '''Restart with Add-ons Disabled'''
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Toolbars -> unselect All Unwanted/Incompatible Toolbars
-> go to Tools Menu -> Clear Recent History -> '''Time range to clear: select "EVERYTHING"''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click '''Clear Now'''
-> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
-> Click OK on Options window
-> click the Favicon on SearchBar -> click '''Manage Search Engines''' -> select all Unwanted Search Engines and click '''Remove''' -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons) -> Restart Firefox
-> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons and Themes later. Check and tell if its working.

Profiles - I have an iPad 1st gen, run iOS5 have have a Profile set up with Lotus Notes to get work email. I want to get a VPN so i can access blocked sites as I travel around the world. The VPN will install a new profile. Can I have more than one

I have an iPad 1 and have a profile set up with Lotus Notes for work email. As I travel around the world I want to install a VPN ( my companies uses a VPN but it is only for work) so I can visit blocked sites. When I install the VPN it want to change the profile. Can I have more than one profile on the iPad or will the VPN overwrite the Lotus Notes profile?
max

Yes, you can have more than one profile installed.

Running SAP on our Rigs all around the world

hi
Anyboddy know the best way of running SAP anywhere in the world offshore. To my knowledge "satelitte" must be the only way and I hope some out there have some experience with such solution. Responstime etc.etc.
Thanks

hi and thanks
Some of our rigs are located in remote areas where we do not have internet or other network, but we must probably use satellite.

Requirement is to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a windows service, which will be created by command: - net use z: \\servername\sharedfolder /persistent:yes

Environment:
OS: Windows 7 32/64 bit, Windows 2008 Server 64
bit/ Windows 2012 Server 64 bit
Priority:
- Critical
Requirement: - Since
the Windows Service is running under the Local System Account, we would like to emulate this same behaviour.
Basically, we would like to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a service using following
command
net use z: \\servername\sharedfolder /persistent:yes.
Already Attempt:
We tried to launch the CMD.exe using the DOS Task Scheduler AT command. Here’s a sample command:
AT 10:36 /interactive cmd.exe
But I received a warning that “due
to security enhancements, this task will run at the time excepted but not interactively.”
It turns out that this approach will work for XP, 2000 and Server 2003 but due to session isolation
Interactive services no longer work on Windows 7, Windows Server 2008 and above.
2. We
tried to create a secondary Windows Service via the Service Control (sc.exe) which merely launches CMD.exe.
<Drive>:\sc create RunCMDAsLSA binpath= "cmd" type=own type=interact <Drive>:\sc
start RunCMDAsLSA
In this case the service fails to start and results it the following error message:
FAILED 1053: The service did not respond to the start or control request in a timely fashion.
3. One
suggestion, we found to launch CMD.exe via a Scheduled Task, but
it is not giving any option to launch CMD.exe in interactive mode; so that I can map network drive using net command.
4. I read an article, which
demonstrates the use of PSTools from SysInternals. I launched the command line and executed following command
psexec -i -s cmd.exe
PSTools worked fine, but It seems that in scope of Sysinternals Software License
Terms. You may not "use the software for commercial software hosting services."
Application will deploy on client, which will be like commercial,
so we are not able to use PSTools.
Kindly assist us for achieving the requirement. We have tried all the ways, but nothing is working for us. Kindly suggest.
I will be really thankful.

Hi Sir,
Nothing worked from above for us. You can see our remarks on posted query.
That’s why, we posted on forum.
And there will not be any vulnerability, because, if we will use "net
use ..."
in network domain; definitely,
we will provide username and password of mapped drive system.
And, that system, itself is given by client; so that, there must not be any vulnerability; they are ready to provide user name and password.
We need a way; by which we can complete the requirement. Kindly assist.
Regards,
S. P. Singh

I am running osx version 10.6.8 with safari 5.0.5. recently i ran one of those recommended upgrades and now Safari continually quits citing .WinASOEasyTweakVKey.Gen.tmp plug-in. how in the world do i combat this issue? thank you!

I am running OS X, version 10.6.8 with safari 5.0.5. recently i ran one of those recommended upgrades and now Safari continually quits citing .WinASOEasyTweakVKey.Gen.tmp plug-in. how in the world do i combat this issue? thank you! I have reset Safari several times.
Another new problem is Firefox telling me, when the e-mail window is open, that the window must run in 32 bit. The window is then disabled and then i have to restart Firefox.
Thank You for any help/hope you can give me with these issues. deborah

You’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
From the menu bar, select
 ▹ Software Update
to install the latest Java update, as well as any other available updates. That should clear the infection in most cases. You must update to the latest version of OS X 10.6 or 10.7 before you can install the Java update.
The removal tool runs automatically in the background and is then deleted. Don’t look for something to click. If the malware is removed, you’ll be notified.
After you’ve secured your system — not before — change every Internet password you have, starting with banking passwords, and check all financial accounts for unauthorized transactions.

Trying to get a computer repaired, getting the run around - a plea for help

First, some backstory:
I ordered a refurbished ThinkPad T440s from the Outlet on July 21 after two weeks of fighting with the bots and snipers. It was a nice machine: it had an i7 4600 processor and a FHD IPS display. The outlet shipped my computer quickly and I was happy to receive it. I opened it up and... it was the wrong computer altogether.
I contacted a CS representative and she told me that the only option was to send the unit back for a refund and try again. Apparently there is no inventory system in place to tell me if the computer I originally ordered was even available, or if it had been sent to a different customer. Begrudgingly, I sent the original laptop back and received my refund.
I decided to try again, and successfully managed to snag another machine with similar specs on July 29 after camping out on the Outlet site. I was overjoyed, but this order has turned out to be a nightmare.
After the status of my order sat on "Released to Manufacturing" for two weeks, I contacted bgriffin2 on these same forums. After giving him my order information, my laptop shipped on the same day, August 12. I was delighted.
When the computer arrived, I opened it up and I was pleased to see that it was the correct machine. However, the laptop had severe scratching all over the rear LCD cover, as if someone had taken their car keys and dug grooves in the lid. The edges of the computer were severely worn, and on one corner it looked like the pc had experienced a pretty nasty fall. To make a long story short, the laptop did not look reconditioned at all. It also had not been function tested, as there were numerous problems with the machine besides the cosmetics. The fingerprint reader did not work and was not even recognized by the BIOS, the speakers made loud popping noises intermittently, and the external battery was not even recognized by the machine. I still do not know if this was a battery issue, or if there is something wrong with the motherboard of the machine.
I used to work at a facility that refurbished handsets for Verizon Wireless. I will tell you up front that this sort of shoddy reworking and QC testing would never fly there. This unit should have never left the facility as a scratch & dent, much less as a refurbished and remanufactured unit.
Do you think that's the end of my sob story? Oh no, we're just getting started. Bgriffin2 acknowledged that this was unacceptable and he suggested I send it in for warranty service to have these issues resolved. I spoke to a very nice woman at the Atlanta service center and she was very helpful in getting me a prepaid carton to send the laptop to Memphis for repair. I sent the laptop off and it was deliviered to Lenovo on the 19th of August. Since then, the status of my repair on the EasyServ website has looked like this:
http://i.imgur.com/t3Qs03e.png
Each and every time I see "Hold for customer information," I place a phone call to the tech support line and ask what they need from me. The first two times I was redirected to the actual people doing the repair, as the representatives that answer the phone couldn't seem to discern what is going on with the repair. Both times, I was told that they didn't need anything from me, that there was a glitch in the system and the hold was accidentally placed. I was told that the hold was removed and that they would begin repairing my laptop immediately. I was content with that answer until I received a phone call last Thursday from someone from billing. This gentleman said that Lenovo wanted $300 to fix the scratched rear LCD cover as it was not covered by warranty. I was stunned. These people had my laptop for two weeks before tellling me that they wanted money from me. I was appalled and told him that there was no way that I was going to pay for it. I had to tell him twice that the unit was not a scratch and dent model, it was a refurbished model. The scratching on the lid is not minor, and the machine does not work as it is supposed to. He said that he would see if he could get the price reduced for me; I said absolutely not. He said that he would see if they would fix it for free out of the goodness of their hearts, and I said fine, do what you can. He promised to call me back and tell me about his findings; I have not heard from him again.
Upset by the previous phone call, I immediately called the tech support number again. A representative named Arva tells me that she sees that I am to receive a new laptop. Confused, I tell her that I had one sent in for repairs. She puts me on hold for a little while and comes back saying that the computer was damaged beyond Lenovo's acceptable specifications and that they were going to send me a newly refurbished laptop with the same specifications, and that I should expect a phone call within the next 24-48 business hours. Of course, that was on Thursday. I did not receive a call on Friday, and it was Labor Day weekend, so no calls then. I also did not receive a phone call yesterday, but I noticed a new "Hold for customer information" popped up.
I called again today to find out what they needed from me. This time the tech support representative tells me that the battery won't hold a charge, and that's the reason for the hold. Now tell me, why on earth would they not have another battery laying around to test with? She tells me that there is no ETA, but I requested a phone call from someone who knows what's going on, and also an escalation of some type. Notice that she did not mention a newly refurbished laptop as Arva had promised. These people can't even keep their story straight.
I am crying out for help here. I am a grad student in CS and I absolutely NEED a computer. I have a desktop at school, but it is not portable and I need a laptop. Please, can someone get something done about this?
My case number is A07YFM9.

Hi massmercury,
I want to apologize for your experience here with the service center. I am moving forward to have your case escalated for further review. Please see my private message. I will be your point of contact until our Customer Advocate team reaches out to you.
Best regards,
Bgriffin2
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

GOOgle maps starts to run around the world, the same other maps (Targeo.pl)

Similar Messages

Maybe you are looking for