Google Maps thinks I'm in Seattle WA - why??

Over the past two or three days, whenever I go to use Google Maps, the locator thinks I'm in Seattle. The problem with that - I'm at home in Metro Detroit! Even when I'm outside, with a clear shot at the sky, the GPS doesn't seem to lock in. I just get the .25 mile circle guesstimate of my location - which is always in Seattle as well.
I have turned off my WiFi, thinking that maybe it was pulling up an errant IP Location from a neighbor's WiFi - but still even on 3G Google Maps thinks I'm in Seattle, not Metro Detroit.
Any guesses at why it's doing that?
Is it a hardware issue? Something I should schedule some time with a Genius at the local Apple Store to have them investigate?
I do use the locator a lot when I'm using Google Maps, and I'm hoping to use other GPS location APPS as they become available. So if this is a hardware issue, I need to go get it straightened out to use my iPhone like I want to.

A GPS receiver requires two sets of data with which to determine location in conjunction with the real-time signals received from the satellites. These are known as almanac and ephemeris data. Normally (a non-assisted GPS receiver), these are obtained from the GPS satellites. Worst case, it can take 12-15 minutes for these files to be downloaded from the satellites.
With Assisted-GPS (as found in the 3G), the device will attempt to get a partial set of almanac/ephemeris data from the A-GPS server, based on where the iPhone thinks it is. This data is transmitted to the iPhone over the cellular data connection (3G or EDGE), or a WiFi connection, whichever is available. If your nearby AT&T cell tower is not correctly identified (bug in the tower CellID info, or an error in the A-GPS server), the iPhone will be given bad ephemeris data. It will then calculate its location based on signals from the GPS satellites and the faulty ephemeris data. That could explain why Detroit becomes Seattle.
Based on what's been reported in the many discussion threads concerning broken GPS, it appears that once the iPhone has obtained (faulty) assist data from the A-GPS server, it doesn't bother to keep listening to the data broadcast from the sky so it never receives correct ephemeris/almanac data.
Like many others, my 3G lost its GPS function after the update to v2.1. I eventually got it working by removing SIM card (so as to disable EDGE and 3G data), turned off WiFi and went outside for 20 minutes. Eventually, the GPS locking in to my location, with the pulsing blue dot. With no A-GPS server to fall back on, I surmise that the GPS receiver had downloaded the almanac/ephemeris data, and was thus able to obtain an accurate GPS location. Then I put the SIM card back in. My Location Services has been working fine since.
@MobileDev - it would be helpful if you could take your "Seattle-based" 3G outside (in clear view of sky) and wait a while to see if it eventually obtains the sky data and realizes that it is really in Detroit. That would confirm if this hypothesis is correct.

Similar Messages

On a mac, I have lost the Scaler on Google map. I think that it is Firefox problem because the map scaler is present with Safari. Thank You

On a mac, I have lost the map scaler on Google map. I think that it is Firefox problem because the map scaler is present with Safari, so it seems that it is not a Google map problem. Thank You

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Numbers/Address Book and Google Maps

I would love to integrate my spreadsheet of addresses or my Address Book with Google Maps.
Is this possible? Somehow?
I take a lot of trips across the country and don't always know when I will be driving by my friends. But if I had a map I could glance at to see where they all are, I would know that I could schedule a lunch with a friend halfway or something like that.
I have heard about MapPoint, but don't know if there is anything like this that is free/affordable/non-MS.
Thanks!

Integrating in Numbers would not be automatic. You'd have to format links to assign to each address.
I've seen plug-ins to use Google maps with Address Book. Try a search on MacUpdate or VersionTracker for Address Book.
I think one of the features for Address Book in Leopard is integration with Google maps.

Safari 8 hover does not work over google map location pins

OS X 10.10.1, Safari 8, Java 8-25
I have always had little odd things not work when using safari on a large % of websites I visit, the latest issues are
no response when hovering over google map location pins, travel site calendars not opening or responding to mouse, drag and drop
show the item being dragged several inches away from the actual pointer, some links don't respond, missing items
or odd layout with print or pop ups going off the screen on some website pages, zooming in and out does not help. I have none
of these issues when using Firefox or Chrome. Been using Safari for 4 years now.

Have you tried a PRAM and an SMC reset? They're longshots, but don't take long to try.
PRAM: http://support.apple.com/kb/HT1379
SMC: http://support.apple.com/kb/HT3964
Have you run Apple Diagnostics from the disc(s) that shipped with the computer?
Since the problem occurs in all browsers, it still sounds like a video hardware or video RAM or maybe a software issue having to do with layers and rendering.
The map layers aren't getting rendered, or if rendered, aren't getting displayed.
Do you have any browser add-ins? Pop-up blockers?
Since you have two video chipsets, it's possible that might be related to the issue.
This non-Apple website talks about switching between chipsets on the various MacBook models so equipped, and points to a free 'donationware' program for the menubar that lets you easily switch between chipsets:
http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-unibody-faq/macboo k-pro-unibody-switching-between-graphics-processors.html
Trying to think of other software that might help pinpoint the problem, does the iPhoto Slideshow 'Shatter' template work? Working properly, it 'shatters' images into several color layers and rotates them in and out to build and deconstruct photos.

Google maps does not work

I have Snow Leopard 10.6.8 on my Macbook Pro. No matter which browser I use, Google maps will not render the map detail - instead it just shows the target location with a letter 'A' or whatever, but the background map is just grey with no features. It makes no difference how long I wait either. I have used the various features in browsers to clear out the 'junk' and have used 'reset safari' when in that browser, Still no joy. I have had the MBP for two years and I expect this simple feature to work as it does on all my Windows PC's and iPhone. I am at my wits end and feel somewhat duped into the Apple world by the triumph of 'form' over function. I want to love my MAC but it aggravates me instead because I spend too much time trying to figure out how to get basic features working when in fact they should work first time without user intervention.
Has anyone got a 5 minute fix for this ridiculous fault please? I cannot upload a screen grab either because (1) this Apple forum wont allow upload of my screengrabbed jpgs of tiffs, or (2) my MBP wont allow it (despite them being within the expected size limit). Another spectacular own goal by Apple.

Have you tried a PRAM and an SMC reset? They're longshots, but don't take long to try.
PRAM: http://support.apple.com/kb/HT1379
SMC: http://support.apple.com/kb/HT3964
Have you run Apple Diagnostics from the disc(s) that shipped with the computer?
Since the problem occurs in all browsers, it still sounds like a video hardware or video RAM or maybe a software issue having to do with layers and rendering.
The map layers aren't getting rendered, or if rendered, aren't getting displayed.
Do you have any browser add-ins? Pop-up blockers?
Since you have two video chipsets, it's possible that might be related to the issue.
This non-Apple website talks about switching between chipsets on the various MacBook models so equipped, and points to a free 'donationware' program for the menubar that lets you easily switch between chipsets:
http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-unibody-faq/macboo k-pro-unibody-switching-between-graphics-processors.html
Trying to think of other software that might help pinpoint the problem, does the iPhoto Slideshow 'Shatter' template work? Working properly, it 'shatters' images into several color layers and rotates them in and out to build and deconstruct photos.

Phone numbers are not showing up on craigslist and google maps is not working.

I uploaded the 3.6 version of firefox and although learning a new look and figuring out what changes had been made were doing ok then the other night the power went out it shut the comp down and when my husband started it back up it had him update it again now my first page when I open it shows yahoo instead of ask, and when I use fire fox to open craigslist lots of the post do not have phone numbers showing up on them that does show up if I use internet explorer to view CL. Also, It will bring up google maps but when I put a location in the box to see it on the map and hit the search button it only starts to load the page with the little word loading... in the center above the location search box but then it says it's done. This also does not happen when I use IE. We tried to restore to a previous date (which there were only a couple to choose from, don't know where the rest of them went) but once the comp restarted itself after supposedly restoring it comes up and says it was not able to restore it properly. I did not have any of these problems with the first update to 3.6 but I think the update that was just loaded 3.6.11 or something like that has really messed something up or it's just not right some how.

Issues with phone numbers not displaying properly can be caused by the Skype extension (Tools > Add-ons > Extensions)
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

C3 - Google Maps don't work whith gprs

Hi,
I am from Portugal and I am a vodafone client.
I want to use google maps whith gprs connection but, as others apps that I download from ovi store, anyone works. It say internet connection fail alltimes...
I think is a configuration issue, but i try some changings in config, and nothing work.
Apps like communites and mail, that came whith the cell, work fine.
Can anyone help?
Tanks!

andrejs,
I just tried the tutorial (works fine) and the tutorial with ADF security (works fine). It seems to be something more specific to your application than anything else.
John

To many security approvals need to use my Google maps! (Running KitKat)

Now that my Verizon S3 phone has been updated to KitKat the number of security boilerplate approvals needed to use anything related to maps or GPS is unacceptable.
I can't leave the GPS on as it drains that battery. So here is the problem: I'm driving along and I need to see my maps, before I would just hit the map button and I would see the map in the approximate area, no GPS required. Now when I do the same, I get a box for settings, I click on that and it sends me to a Location page where I need to turn on the GPS, now I need to Agree that I have turned on the GPS, now I get another box to Agree that Google apps are collecting my location info, at this point I need back step out to the map app to see where I'm at.
Most users of the maps app will use it while driving (even if you don't think it's a good idea). I don't think going from 1 step to 5 is making the situation any safer, it's now takes many more seconds of not looking at the road to getting the app working then it had before.
If you have a fix for this, that would be great!

Thanks for it, I was too looking for the hello world example
of using externalInterface to load a Google Map into Flash using
AS2, I had asked this question many here, but did not get proper
answer, when I had googled I had got this page, I got the answer.
Thanks again & hope I will get more info from this forum.

Can no longer operate other apps when Google Maps is giving directions

I have an iPhone 4s and just recently upgraded to IOS 8.02. I use Google Maps extensively for traveling, along with FStream (Internet radio app). Up until this update (and a Google Maps update), I was able to reduce Google Maps en route, bring up FStream and choose another station. Now, when Google Maps is directing me somewhere (using Directions), when I pull up FStream, there is a blue banner on top of the app that says "Google Maps is using your location." While this is there, you are unable to operate any of the controls (buttons) on the app (and, I'm guessing, any other app).
Now, having also used both Apple Maps (the ill-fated release) and Waze, I know Apple Maps also restricted usage of other apps while it was providing directions. And, Waze wouldn't allow you to even recite (using the mic) or type in an address while moving (obviously a safety consideration, which I can understand). I think they reversed that decision in a later release. But, Google Maps (up until now) at least let you switch between open apps and (in my case, in FStream) change stations.
My questions are:
1. Is this an IOS 8 "improvement" or a Google Maps "improvement" (i.e. how do I complain to)?
2. And, other than having to temporarily turn off "directions" in Google Maps in order to be able to switch stations, is there another fix to this?
Thanks.
Richard

Well, I think I've narrowed it down somewhat. In experimenting with other apps while Google Maps is giving directions, I find that most other apps are working, even with the blue Google Maps banner on top. So, in summation, I believe it is the old, out-dated, FStream app (which was last updated in 2010) that might be the culprit. The search begins for another Internet radio app where you can manually enter the station URL.

Battery drain with ios6 apps crashing! google maps app is gone. The Apple version is like asking a blind man for directions! Awful. As consumers we are caught up in the squabbles between Apple and Google, and we pay the price.

Does anyone else have battery life problems with the iOS6 update? Some of my other apps crash constantly, bringing my reading or workflow back to the home screen. The new map App is a disaster! Is there an online petition to have Apple bring back the Google map app? It is like asking a blind man for driections! Addresses, postal codes, locations, area codes and phone numbers in the Vancouver BC area are consistently wrong! AUUUUUGGGHHHHHHH!

As someone who spends a lot of time writing reviews (for vidya gaems ;P) I enjoyed your review. I am also looking at getting a new phone soon (I am saving up to buy out on refresh). I was considering th next iPhone but from reading your review I may consider this device instead. What I need to know is this. When the phone is in a phone holder which you have in a car for example does the screen get pressed at the sides? I don't wan't to open up Waze put my phone in a holder and it get cancelled out by what it thinks is a button press. Also, is the screen goign to be scratched easy? I am guessing there is no decent screen guards yet. I did buy some screen protection liquid that was recommended on these forums and my lumia still got scratched by about an inch or so.

Google Maps Widget doesn't work after upgrade to Safari 4.0

After a lengthy bit of trouble shooting with an iWeb specialist yesterday, we reached a conclusion that somehow installing the release version of Safari 4.0 (released Monday, 6/8) causes the GoogleMaps widget to not function or display properly. Using backup harddrives of recent systems, the widget worked properly in OS X 10.5.7 running iWeb 3.0.1 with both Safari 3.2 and the BETA VERSION of Safari 4. On that same system, once I download and installed the release of Safari 4., the maps widget would not work or display properly.
To describe what doesn't work: None of the options (search field, address bubble, or zoom controls) appear regardless of what the user selects in the HUD when creating or editing the content. I am unable to pan and/or scroll around the map within its bounding box at all. The only thing I am able to do is edit the address field in the HUD and end up with a map with that location centered in the window.
The AppleCare specialist didn't have much response in that I think this is a brand new and VERY obscure bug.
I am curious to know if anyone else has exprienced this condition.

It may be obscure in iWeb but the Safari 4 update has messed up the Google maps in iPhoto big time. Be sure to report it as they are all related to the Safari 4 upgrade and probably only be solved by a Safari fix.
http://www.apple.com/feedback/iweb.html
OT

How do I delete the old Google Maps applicaiton

I think I have a problem that many wish they had prior to google releasing an updated Maps application. I updated to iOS6 and got the new Apple Maps app, but still retained the Google Maps app as well. This is one of the kind of apps that can't be deleted, like SMS, Phone, etc.
I can move it around, and generally used to just stuff it away on the last page, but now I want to make an effort to remove it.
Looking at the file system, at the .ipa files, the built in .ipa's are not included. Anyone know where those are stored, so perhaps I could remove that, to see if it would remove it from my phone on next sync?
I did a backup and restore the other day, still no change. I did a backup, completely erased my phone to factory, then did a restore, which also didn't work. And finally, though I really didn't want to, I went ahead and erased my phone with the intention of rebuilding it from scratch, though the darn Maps app was still there, so just backed up a step and did a restore to my last backup point to save the hassle of setting up my phone from ground zero.
I have added two screen shots, one wiht my mouse selecting a normal app so you can see I get the "X" to delete icon on the app, and the other with the maps application selected so that you can see I DO NOT get the "X".
I filtered the left list to just the google ones, but have tried various other combinations such as "maps" to locate it, it is not in the list, just as "phone", "sms", and "mail" are not in the list.
Any help would be appreciated
Message was edited by: this-is-my-alias because I forgot to add the image attachments.

Older versions of the SMS app I don't even believe we're called "SMS" but "Messages" though I could be wrong on that. There were differences in the SMS app regarding FaceTime. The current app has a button at the top that allows you to jump that conversation into FacrTime. Older versions didn't have that button as FaceTime was not released yet.
Yes, I can delete the new Google Maps App, it is an app I downloaded from the App Store. What I can't delete is the icon labeled Maps, which is also a google app, not a bookmark.
For the large majority of users of iPhones of compatable hardware, when they upgraded to iOS6 the Google maps application that was part of a default iPhone installation was deleted. In it's place was installed Apples debatably botched Maps application.
In my case, that didn't happen. I was left with both applications still intact. At first I didn't even understand why everyone was so upset with Apples Maps implementation. From my perspective, if they didn't like it they could simply use the Google Maps application they had been using all along. Then I started to see people asking where they could download the old Google Maps App and it started to make sense. Their system no longer had the app. They only had one choice, Apple 's Mapping app, while I still maintained both choices.
I'm looking for others who have experienced this and solved it. I've seen similar cases where different apps hang around longer than they should, but never found a solution. I assume over time enough users will report this to Apple and a software update will correct it. I however, would like to correct it now.

Integrating Google Maps in Oracle Apex and 404 Not found error page

Currently using APEX version 3.2.0.00.27 installed in OracleXE version 10.2.0.1.0. Have been attempting to recreate some examples of Google Maps within APEX. Found a nice set of examples here that build up to what I'm looking to ultimately do by incorporating google maps into APEX:
http://blog.whitehorses.nl/2009/10/04/integrating-google-maps-in-oracle-apex/
Unfortunatly, I'm getting the "404 Not Found, Not found, The requested URL /apex/wwv_flow.accept was not found on this server" page when I try to recreate the "Map with Search" example. I'd like to see if this really works using the html input and button tags in the body/region source versus creating APEX items to pass the address values to the javascript in the html header of the apex page. I'm thinking it's just an html thing within APEX that you have to do it a certain way, but I haven't managed to hit that magic combination. have gone to the google maps api v2 and looked at the html they use (it's what these examples with apex are based on) and tried that just to see. Same 404 result.
I've seen suggestions at this forum and elsewhere that the 404 error is due to a bug. have been to metalink, and really haven't seen anything that spells out what the bug is and how to patch it or work around it. May be I just haven't found the right note/doc yet. have seen suggestions to change something associated with the Anonymous account that APEX uses. Have turned on authentication in the application to use an APEX user account with a logon page to the application. Still get the 404. Although, I have not adjusted anything elsewhere, like a DADS config file, because the apex/xe configuration is using the plsql gateway. Not sure of any procedure for changing settings on anonymous account when using plsql gateway.
Open to suggestions. APEX 3.2 is customer version, so going to 4 may not be an option yet. XE, on the other hand, can certainly be swapped for an 11g version standard or enterprise edition if need be. I don't think this is a db version problem though. I think it's more on the APEX side of things.
Anyway, any help or suggestions are appreciated.
thanks
rtp
Edited by: RTP on Jun 24, 2011 10:30 AM

Hi I have the same problem.... if you found the solution, please put it here to see it... I need a solution to this its urgent!!
Thanks!!

How to get digital signature for Google Map geocoding V3 in PL/SQL?

Hi, Gurus:
    Could anyone provide me an example about how to generate digital signature for Google Maps service v3 in PL/SQL? We tried to upgrade our program using Google maps service from v2 to v3. We are using PL/SQl on background to send request to Google for geocoding. We found some sample code to register with digital signature, but none of them is based on PL/SQl. Notice I used Google business client ID "gme-XXX" and wallet.
https://developers.google.com/maps/documentation/business/webservices/auth#digital_signatures
Google Maps API - more URL signing samples
Here is my code for V2. I notice in order to get signature, I need to use HMAC-SHA1 algorithm.
procedure Get_Geocoding(P_s_Address in varchar2, P_s_Geocoding out varchar2, P_n_accuracy out number, P_b_success out boolean) is
l_address varchar2(4000);
l_url varchar2(32000);
l_response varchar2(3200);
n_first_comma number;
n_second_comma number;
n_level_length number;
BEGIN
/* TODO implementation required */
l_address:=APEX_UTIL.URL_ENCODE(P_s_Address);
l_address := replace(l_address,' ','+');
l_url := 'http://maps.google.com/maps/geo?q='||l_address||'&'||'output=csv'||'&'||'client=gme-XXX';
l_response := utl_http.request(l_url, APEX_APPLICATION.G_PROXY_SERVER, '/u02/app/oracle/admin/apexsb/wallet', 'XXXXXXXX');
n_level_length:=0;
n_first_comma:=instr(l_response,',',1,1);
n_second_comma:=instr(l_response,',',1,2);
n_level_length:=n_second_comma-n_first_comma-1;
P_n_accuracy:=0;
if n_level_length>0 then
P_n_accuracy:=to_number(substr(l_response,n_first_comma+1, n_level_length));
end if;
l_response:=substr(l_response,instr(l_response,',',1,2)+1);
--dbms_output.put_line('In function: l_response ='||l_response);
P_s_Geocoding:=l_response;
if (P_s_Geocoding<>'0,0') then
P_b_success:=true;
--dbms_output.put_line('true');
else
P_b_success:=false;
--dbms_output.put_line('false');
end if;
END;
Thanks!

Hi, guys:
    I tried to generate digital signature for Google map service
     Maps for Business: Generating Valid Signatures - YouTube
    Generating an HMAC-SHA-1 Signature Using Only PL/SQL
      OAuth and the PL/SQL | Data Warehouse in the Cloud
   but I got error message from Google:
Unable to authenticate the request. Provided 'signature' is not valid for the provided client ID. Learn more: https://developers.google.com/maps/documentation/business/webservices/auth
   I think there is something wrong with my code to generate signature, as if I remove the part regarding client and signature, it will work, can anyone help me on this problem?
/*Procedure Get_Geocoding is used to get geocoding with accuracy level for V3 business account, you can find Google map digital signature descrirption from
https://developers.google.com/maps/documentation/business/webservices/auth#digital_signatures
if geocoding is 0,0, procedure returns false to indicate failure of get geocoding*/
procedure Get_Geocoding2(P_s_Address in varchar2, P_s_Geocoding out varchar2, P_n_accuracy out number, P_b_success out boolean) is
--private key for Google business account, this is provided by Google with client name.
l_private_key_src varchar2(200):='xxxxxxxxxxxxxxxxxxx';
l_private_key_b64_alter varchar2(200):= translate(l_private_key_src,'-_','+/');
l_private_key_bin raw(2000);
l_client_name varchar2(100):='gme-xxx';
l_signature_mac raw(2000);
l_signature_b64 varchar2(200);
l_signature_b64_alter_back varchar2(200);
l_Google_service_domain varchar2(200):='http://maps.googleapis.com';
l_address varchar2(4000);
l_url varchar2(32000);
l_path varchar2(32000);
l_response varchar2(32000);
l_page UTL_HTTP.HTML_PIECES;
n_actual_length number;
json_obj json;
json_tempobj json;
jl_listOfValues json_list;
json_geom_obj json;
json_loc json;
l_lat VARCHAR2(40);
l_lng VARCHAR2(40);
l_status VARCHAR2(255);
json_accuracy json;
--temp_string varchar2(10000);
n_first_comma number;
n_second_comma number;
n_level_length number;
BEGIN
/* TODO implementation required */
l_private_key_bin := utl_encode.base64_decode(UTL_I18N.string_to_raw(l_private_key_b64_alter, 'AL32UTF8'));
l_address:=APEX_UTIL.URL_ENCODE(P_s_Address);
--dbms_output.put_line(l_address);
l_address := replace(l_address,' ','+');
l_path := '/maps/api/geocode/json?address='||l_address||'&'||'sensor=true';
dbms_output.put_line(l_path);
l_signature_mac :=DBMS_CRYPTO.mac(UTL_I18N.string_to_raw(l_path, 'AL32UTF8'), DBMS_CRYPTO.hmac_sh1,l_private_key_bin);
l_signature_b64:= UTL_RAW.cast_to_varchar2(UTL_ENCODE.base64_encode(l_signature_mac));
l_signature_b64_alter_back:=translate(l_signature_b64,'+/','-_');
dbms_output.put_line(l_signature_b64_alter_back);
--get response from Google map service
l_url:=l_Google_service_domain||l_path||'&client='||l_client_name||'&signature='||l_signature_b64_alter_back;
--l_url:=l_Google_service_domain||l_path;
dbms_output.put_line(l_url);
l_page:=utl_http.request_pieces( l_url, 99999);
for i in 1..l_page.count loop
l_response:=l_response||l_page(i);
end loop;
n_actual_length:=length(l_response);
dbms_output.put_line(n_actual_length);
dbms_output.put_line(l_response);
--parse JSON result
json_obj:=new json(l_response);
l_status := json_ext.get_string(json_obj, 'status');
IF l_status = 'OK' then
jl_listOfValues := json_list(json_obj.get('results'));
json_tempobj := json(jl_listOfValues.get(1));
json_geom_obj := json(json_tempobj.get(3));
json_loc := json_ext.get_json(json_geom_obj, 'location');
l_lat := to_char(json_ext.get_number(json_loc, 'lat'));
l_lng := to_char(json_ext.get_number(json_loc, 'lng'));
P_s_Geocoding:=l_lat||','||l_lng;
dbms_output.put_line('##########'||P_s_Geocoding);
case json_ext.get_string(json_geom_obj, 'location_type')
when 'ROOFTOP' then P_n_accuracy:=9;
when 'RANGE_INTERPOLATED' then P_n_accuracy:=7;
when 'GEOMETRIC_CENTER' then P_n_accuracy:=5;
else P_n_accuracy:=3;
end case;
P_b_success:=true;
else
P_b_success:=false;
P_n_accuracy:=0;
P_s_Geocoding:='0,0';
end if;
END;

Embedding more than one google map in a tabbed panel

Hi, I wonder if anyone knows if this is possible. I am building google maps in business catalyst and what I want to do is add multiple maps into my muse site. For example, restaurants on one map, coffee shops on another, local produce on another. Does anyone know if this is possible? Each time I try and enter the snippet of code I get to add to muse from business catalyst it is fine if I just enter on blank page, but when I try and enter the html in the tabbed panel it doesnt work. Does anyone know of a solution ? I would really appreciate any feedback, Michele

Strange to be the first to reply to my own question but here goes, it may help someone with similar woes. I had been following the wiring colour code stringently. That being GREEN=FRONT, BLACK=REAR and ORANGE=SUBWOOF/CENTRE.
After clicking the Universal audio jack button on the realtek sound manager C.P and manually setting the blue port to be rear I took the Jack for my rear channels that had been in the BLACK port, and plugged it to the BLUE. I then tested all the speakers and "VOILA" every speaker channel works.
Im somewhere between NOOB and have to fix all my familys PC problems because they know even less than I do. Not sure what that makes me, a bit of a chancer probably, who gets lucky more than anything, anyway I can only guess that there is a problem with the onboard "BLACK" port. In saying that I have just came from a 2.1 setup for front and built in flat panel srs monitor speakers for rear, all this was setup as quadrophonic and as I recall the Black port worked fine whenever I used it as the rear channel. So anyway its working, Im not sweating too much about the whys and how comes. I am a little concerned about the 6700 reputation for a certain volume controller inner part burning out (TRANSISTOR)? I think is the culprit. Anyway I will deal with that if and when the time arises. Only 2 months left on my warranty and my speakers have been sat doing nothing for over 6 months maybe more so I should get some life out of them, fingers crossed.

Google Maps thinks I'm in Seattle WA - why??

Similar Messages

Maybe you are looking for