Google mobile problem with 3G S

When I use the Google mobile app with the 3G S, it doesn't always activate the voice search when I put it up to my face. I don't recall having that problem with my original iPhone. Anyone else having this problem?

I find it has to be a definite move to your ear. Move too smoothly and it won't trigger the voice search.
Also, check the Google app settings (the button at the bottom right). "Screen Rotation" is supposed to be set to OFF. "Turning on Screen Rotation disables motion sensing for voice search."

Similar Messages

BT Mobile - Problem with Erroneous Credit Score an...

I have been a BT Customer for 35 years and have always paid my bills on time. I have a monthly direct debit for my landline and Broadband and have just added BT Mobile to my account. I have to say that I should have paid more attention when setting up BT Mobile online as it did flag through the process that there would be a cap of £50 spend outside the monthly plan and that roaming would be turned off. On receipt of the confirmation email on 2nd April this limit to my account was restated and was put down to my credit score. I called BT on the 2nd and was told that this was not a problem and the limits could be changed once the service had started. The service commenced on 8th April and on entering MYBT I am able to increase the monthly cap to £100 (not that i want or need to). However, the real issue I have is that I cannot activate Mobile Roaming. My account is flagged (Sorry, but you can’t use your phone abroad at the moment. You need to be a BT Mobile customer for six months first and have paid all your bills on time).
I rang BT on 10th April to find out what the problem is and was told that it was my credit score and there was nothing that could be done to change what had been done. I was told that I would need to find out for myself what adverse information was held by Equifax who BT use. After paying £14.95 to Equifax for a full report and credit score I found that my credit score is 527 which is deemed to be excellent against the UK average score of 380, and there is absolutely no adverse information whatsoever which is of no surprise to me. So what on earth are BT looking at. I have tried in vein to get somebody in BT to check my file as there must be an error. I suspect that when I applied on line the process is automated and the system has made a mistake. Rather than investigate my case I am just being told nothing can be done to let me use my phone whilst abroad. After several hours on the phone to various people over a few days I have come up against a brick wall.
Is there anyway a moderator could help me please. If I had known that I would encounter this I would not have signed up for BT Mobile and Ported my number which I would be loathe to loose.

it may well be nothing to do with your credit score, but more to do with bt internals
ie: I purchased a new second hand car last year (December), my bank who i have been with for over 10 years, have a current loan with (that ends this year) and have had previous loan with, never been overdrawn, wages paid in each month and bills paid on time said I could not have a loan and if they did offer one it would be at a very high interest rate (i am still waiting to fine out from them why), even though I got a loan through another company at a very good deal, I upgraded my 3 accounts with EE from T-Mobile in December and January which all required a new credit check went through without issues (and they offered me another line on my contract on Sunday, saying that my credit rating is perfect) . My credit rating from experian when I checked (because of my bank) was Green and in Excellent condition.
The only thing I know was 11 years ago I got in financial debt (the bank purchased the debt from another company, but I paid everything off by scrimping and scraping for a number of years) - it may be that they are still using against me, but every other company has said they find nothing wrong with my rating, but what I have heard is that they reset ratings every month, so you may be fine to get something on the 1st of the month, but if applied on the 2nd they would refuse it.

Flex Mobile: Problems with MultiDPI SplashScreen

Hi guys,
The property applicationDPI in my application is 160, and I created three bitmaps to 160, 240 and 320 DPI to be used in the SplashScreen.
I created this class . see : http://www.adobe.com/devnet/flex/articles/mobile-skinning-part2.html#articlecontentAdobe_n umberedheader_5
package preloaders
 import mx.core.DPIClassification;
 import mx.core.mx_internal;
 use namespace mx_internal;
 public class MultiDPISplashScreen extends CustomSplash
 [Embed(source="assets/mobile160/splash_160.png")]
 private var SplashImage160:Class;
 [Embed(source="assets/mobile240/splash_240.png")]
 private var SplashImage240:Class;
 [Embed(source="assets/mobile320/splash_320.png")]
 private var SplashImage320:Class;
 public function MultiDPISplashScreen()
 super();
 override mx_internal function getImageClass(dpi:Number, aspectRatio:String):Class
 if (dpi == DPIClassification.DPI_160)
 return SplashImage160;
 else if (dpi == DPIClassification.DPI_240)
 return SplashImage240;
 else if (dpi == DPIClassification.DPI_320)
 return SplashImage320;
 return null;
Ih the main app:
<s:TabbedViewNavigatorApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 applicationDPI="160"
 preloader="preloaders.MultiDPISplashScreen"
 splashScreenMinimumDisplayTime="2000">
The problem is that Flex does not take the correct bitmap if i run my app at 240DPI or at 320DPI (as does the class MultiDPIBitmapSource)and my splash screen is scaled and grainy! :-(
Can anyone help me?
Thnks a lot!
Francesco

Hi Francesco,
Setting the application dpi shouldn't affect the splash screen (you can verify by testing when you don't set the app dpi or by debugging the function). The dpi that gets passed in to the imageClass should always be the runtime dpi.
I see that in your MultiDPISplashScreen class extends CustomSplash instead of the SplashScreen. Maybe that could be the issues, where does CustomSplash come from?
Edit:
The issue seems to be that in the SplashScreen class we don't undo the automatic dpi scale factor when the scaleMode="none" (the default). When this is combined with different images per dpi, this will cause the observed behavior. Setting scaleMode to any other value should fix the issue.
If you need to have the image centered and not scaled, then you may follow the work-around posted by Uggers at the end of the thread (bottom of the page) at http://www.adobe.com/devnet/flex/articles/mobile-skinning-part2.html#articlecontentAdobe_n umberedheader_5
Thanks,
-Evtim

Google chart problem with DPS

hi,
I tried to include google piechart as a web content to my folio , but I always get error although chart generated and successfully loaded in all browsers that I tested ( safari, chrome, firefox, ie.)
you can find the sample chart below
http://www.edirnecityguide.com/grafik.html
Any suggestion?

error in content viewer is
Result of expression 'c[O]' [null] is not an object.
but none of the browsers have this error.

Google mail problem with Yosemite 10.10.1.

Neither of my google mail accounts will send after upgrading to Yosemite 10.10.1, but they will receive. How can I fix this?

Troubleshooting Apple Mail
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

Is google earth compatible with os x lion?

Lots of discussion on various websites about serious Google Earth problems with OS X Lion. but surprisingly cannot find same topic on Apple discussions -- or am I searching in the wrong place?

i'm having trouble with GE with OS 10.7.4 -
running a MacBook Pro, mid 2011 version, fully updated. neither GE v 6.2 or the earlier v6.1 would work with my computer after attempting several reinstalls. all i get is a white screen on startup, with visible toolbars on the top and left side. it enters full screen mode automatically, and seems to not be able to reduce to a window in the main desktop. i've tried the problem solvers on the google help page, but one of the solutions involves going to the "library->cache->google earth" under user name, but there's no "library" file there.
is the problem with my browser? (firefox 13.1, recently upgraded from 12.x)
is the problem that i'm using multiple spaces?
do i have too little graphic power? (pretty new computer, i'd be surprised?)
help....!!!
system info available if think it will help...

Problems with Google Mobile App in 3.0

My Google mobile app is not working correctly in 3.0... it won't register motion sensing for voice search (and yes, motion sensing is turned on in the settings menu and the accelerometer works fine in other apps). I have tried removing and re-installing the app several times, to no avail. Is anyone else having this problem? Anyone have any ideas as to a solution?

I've noticed the same issue since the update to 3.0. Generally Google will not react at all with the tones/chimes to let me know that it's 'paying attention', at least for several attempts of raising it to my ear (though the screen will darken as if on a phone call so accelerometer is doing its part). Then (sometimes) it will inexplicably begin to behave properly for search after search. I've found only two mentions of this issue in the discussions (surprised there aren't more considering it must be related directly to the update), neither with a solution, but at least I know it's not my imagination.

Google Cloud Print problems with HP 1102w

I have an HP 1102w printer that I am unable to set up with Google Cloud Print.
What doesn't work:
* After I successfully register the printer with google cloud print, it sends a test page. The test page sits indefinitely in the google cloud print queue. The HP eprint website indicates the job was received but failed (under Recent Print Jobs).
* I also tried printing from Gmail on Android and the same problem occured (sits in google queue, error indicated on HP eprint recent jobs list).
What works:
* Printing via emailing printer's eprint address
* Airprint from iPad
* Conventional printing over local wi-fi network
Details:
* I upgraded the firmware to datacode: 20110826
* HP eprint is enabled on the printers web page
* I do not have a proxy server
This question was solved.
View Solution.

Hi CarlSpackler,
I've had some issues using the Google Cloud Print as well, I know Google Cloud Print is still in beta as of right now, so of course you can expect some bugs in regards to jobs getting stuck in their queue. Also Cloud Print is only compatible with Google Mobile apps and Chrome currently. As for printing from Gmail on Android, there are some stipulations for that. You have to have the Cloud Print App installed on the Android unit before you can start printing. Also, unlike using Cloud Print for Apple devices, you don't send the Cloud Print job from the Gmail account, you just have to open the desired jpg, pdf, email, etc.....go to your Options to send...once it opens you'll select Cloud Print. Then it will prompt you to SELECT your desired Eprint printer that you've pre-installed on your Google Cloud Print account. Hope this helps.

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

10.6.8 Upgrade Problems with Google Display Error post install

Hi -- I just upgraded my IMac to 10.6.8 in anctipation of migrating to Mountain Lion later this week.   While the installation went very smoothly, it seems I am having a problem with the Google display.    When I open Google, the search box has no lines around it and when I enter the box, it jumps to the Google search in the menu bar, and I can't read what I'm typing.
I've tried a multitude of other sites where there are search boxes, log in boxes, etc, but I am only having problems with Google.   Any thoughts?
Model:                         IMac 9,1
Processor Speed:         3.06 GHz
# Processors:               1
Total # of Cores:           2
L2 Cache:                    6 MB
Memory:                         4 GB
Bus Speed:                    1.07 GHz
Thanks
Bill

boy these forums really help you out. having similar issue and no one seems to have a clue why 10.6.8 screws everything up. I did notice the active directory plugin version changed from 6.5 to 6.5.1. They did something.

Mobile Home problem with Magic Triangle

So I have been setting up a magic triangle for the past few days with an OSX Lion server. I believe it is working properly. The server is running OD and is bound to my AD. I have made an OD group which contains my AD users, and I have set that OD group to have limited application preferences (one of them is to block the App store). All my users have MacBook Airs which they will take off-site, so I enabled mobile home folders in the AD bind and in the OD group mobility settings (with confirmation required).
When I tested it today, with Airs running 10.7.4, here is what happened.
When the system was on the network, it would log a user in, ask to create the mobile account, and successfully create it. Once logged in they were limited to the application preferences that I set on the server. I considered this a complete success.
When I disconnected them from the network, I had expected that they would still be able to log in and the system would fuction the same way with the exception that they would not sync their changes until they were back on-site.
Instead...
When the same user trys to log in it says the AD server is unavailable and then logs them in anyway. However, once they are at the desktop, none of the permissions are in place. They can go to the app store, or do anything else they feel like. Once they are back on the network, all the server based preferences reappear and lock the system down.
So my questions are:
1. Should a mobile account based system compain that it cant find the AD domain when offsite?
2. Why is it not checking some cached verison of the permissions and locking down the notebook when offsite? I can tell that it is caching the user name and password (as loging in as a user the air has never seen before will simply give a login error), as it will let them in, but it is not holding any preferences.
3. How can I prevent users from simply disconnecitng from the network to bypass all my server based policies?
Hope someone can help

Hi,
I'm having a similar problem with exactly the same setup, our clients are 10.7.4 wired not wireless the OD server is 10.7.4 and the clients are authenticating via an AD 2008 R2 domain.
We've had this scenario in the past running 10.5 and 10.6 without any problems but with 10.7.4 the clients' MCX settings are lost when they're not connected to our network. It seems to only lose the settings applied to user groups but not computer groups.
At this moment in time I don't have an aswer I'm still looking, have you found a solution?
I know configuration profiles are the way forward and in the future I'll move over to them but they don't seem to work that well with PHD's at the moment.
If anyone has any thought on this it would be much appreciated.
Thanks,
Jay.

Yoga Tablet 10" - update to Android 4.4 and further problems with Google Music

Hi everyone.
I've just upadated my Yoga Tablet 10" to Android 4.4. Whole process went smoothly but afterwards I'm experiencing some problems with Google Music. Playback is "skippy" or "choppy", even if whole song is downloaded. Every 15-25 seconds there small pause, which is quite annoying.
Local music files (uploaded through usb) seem to work just fine.
I've even tried resetting whole device to factory settings but without any success.
I also have an impression that youtube playback is not so smooth as it used to be in Android 4.2...
Has anyone experienced something similar? Any hints or sollutions?
Lenovo Yoga 10 (B8000-F), Android 4.4.2

acepuresd wrote:
Hi,
I tried updating my B8000-F to android 4.4.2 and it won't take.
Any help, anyone?
Thanks,
Ace
http://forums.lenovo.com/t5/Idea-Android-based-Tablets/KitKat-roll-out-for-Yoga-Tablets-starting-Jun...
"For those wondering where the KK OTAs went, I had them pulled while we work through issues."

Voice problems with Lync 2013 Mobile

Hi
I have a situation where Lync 2013 on both iPhone & Android has started giving problems with making and receiving voice calls. There are no problems with Windows, Mac or Phone Edition clients that I'm aware of. I have not tested anything over the VPN,
but this should not be a factor.
For receiving calls - If the user is connected to the LAN via Wi-Fi AND the call is from an internal user, all works fine. If the call is from an external user OR the user is connected via 3G, then the call just shows "Connecting" indefinitely.
This includes transferred calls.
For making calls - If the user is connected to the LAN via Wi-FI and calls either an internal or external users, all works fine. If the user is connected via 3G and calls either an internal or external user, the phone rings, but when it's answered it shows
call ended.
I have ran RUCT on a computer outside the network, with the following findings:
DNS:
Record
Type
Hostname
IP Address
Port
Weight
Priority
_sip._tls.domain.com
SRV
sip.domain.com
Edge External IP
443
100
0
sip.domain.com
A
sip.domain.com
Edge External IP
sipexternal.domain.com
A
sipexternal.domain.com
Edge External IP
meet.domain.com
A
meet.domain.com
<null>
_ntp._udp.domain.com
SRV
pool.ntp.org
NTP Server IP
123
100
0
_sipfederationtls._tcp.domain.com
SRV
sip.domain.com
Edge External IP
5061
100
0
lyncdiscover.domain.com
A
sip.domain.com
Edge External IP
lyncdiscover.domain.com
CNAME
sip.domain.com
I have ran Test Port on each entry where there is a port with successful results. Ping works on all entries.
If I query Certificate Information on sip.domain.com with port 5061 or 444, it succeeds and returns the certificate with subject sip.domain.com. If I query 443, it fails with error "An error occurred while retrieving the certificate. Unable to read
data from the transport connection: An existing connection was forcibly closed by the remote host."
On Microsoft Remote Connectivity Analyzer, all tests pass except for the certificate test:
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server sip.domain.com on port 443
The Microsoft Connectivity Analyzer wasn't able to obtain the remote SSL certificate.
Running netstat on Lync Edge gives me the following with regards to port 443:
TCP <Internal IP>:443 Lync2:0 LISTENING
TCP <External IP>:443 Lync2:0 LISTENING
Firewall allows connections on port 443 and I've tried disabling the firewall as well. Trying to open https://sip.domain.com in the browser on the Lync Edge fails also, telnet succeeds, but no data is returned.
I've restarted the AV service and also rebooted the Lync Edge server, no change. In the topology builder, I can see that AV is configured to listen on port 443.
Any ideas would be most welcome.
Regards
Lionel
MCP Windows Server MCTS .NET

I have ran a large amount of additional tests. On my latest round of testing, I have obtained the following results:
Call received via PSTN gateway on user DID, answered by desktop client inside LAN - works.
Call received via PSTN gateway on response group, answered by desktop client inside LAN - works.
Call received via PSTN gateway on user DID, answered by desktop client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by desktop client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by mobile client inside LAN - does not work.
Call received via PSTN gateway on response group, answered by mobile client inside LAN - does not work.
Call received via PSTN gateway on user DID, answered by mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on response group, answered by mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client inside LAN - does not work.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client inside LAN - does not work.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client outside LAN (3G) - does not work.
Call made through PSTN gateway from desktop client inside LAN - works.
Call made through PSTN gateway from desktop client outside LAN (behind NAT, DSL router) - works.
Call made through PSTN gateway from mobile client inside LAN - does not work.
Call made through PSTN gateway from mobile client outside LAN (behind NAT, DSL router) - works.
Call made through PSTN gateway from mobile client outside LAN (3G) - does not work.
Call from desktop client inside LAN to desktop or mobile client (regardless of location) - works.
Call from desktop or mobile client (regardless of location) to desktop client inside LAN - works.
Call from desktop or mobile client (regardless of location) to desktop or mobile client (regardless of location) - works.
There is no difference in behaviour between normal calls and conference calls. Reproducing the problem seems to require the following:
1. PSTN gateway needs to be involved
2. One party needs to be on mobile client
3. The mobile client needs to be inside the LAN or on a 3G connection, but not behind NAT on a DSL connection
The only conclusion I can make is that somehow NAT makes the problem go away, but it does not affect desktop clients (on the LAN or Wi-Fi at least, I do not have a way to test them on 3G).
The PSTN gateway (Cisco UCM) could also be the problem, but it works fine in all other cases. It has 4 trunks and makes all kinds of routing decisions, but once a call is routed to/from Lync, it should not make a difference on what type of device it is answered.
I'm really baffled by this one. Perhaps the 3G thing is a service provider issue and the issue on the LAN has something to do with the internal DNS combined with the behaviour of the mobile client. Just not sure exactly what.
MCP Windows Server MCTS .NET

Font problem with Montserrat and Maven Pro from google

Seems like some fonts don't render as they should in Firefox 29.0.1. I tried to use google web fonts like Montserrat and Maven Pro, no problem with downloading but this fonts don't look good.
I tried to install Montserrat to my Windows 7 (64) and deactivated css so that FF runs the font but same problem occurs.
A really strange problem is that from my computer at work this fonts don't work from FF or Chrome, all versions of IE is fine.
At home i have a laptop with same OS and version of FF and from home it works! But not Chrome..
I have search on the net and at your support site but haven't find any answers yet.
You can look at http://arenago.axiell.com for your self. Below is troubleshooting information from my version of FF where this problems occurs (Sorry about the Swedish)
Programfakta
Namn: Firefox
Version: 29.0.1
Användaragent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:29.0) Gecko/20100101 Firefox/29.0
Kraschrapporter för de senaste 3 dagarna
Alla kraschrapporter
Tillägg
Namn: Classic Theme Restorer
Version: 1.1.8
Aktiverad: true
ID: ClassicThemeRestorer@ArisT2Noia4dev
Namn: Firebug
Version: 1.12.8
Aktiverad: true
ID: [email protected]
Namn: HostAdmin
Version: 1.4.9.2
Aktiverad: true
ID: {bd54afa8-b14a-4d7a-aecf-37e34e882796}
Namn: Web Developer
Version: 1.2.5
Aktiverad: true
ID: {c45c406e-ab73-11d8-be73-000a95be3b12}
Viktiga ändrade inställningar
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.places.smartBookmarksVersion: 6
browser.sessionstore.upgradeBackup.latestBuildID: 20140506152807
browser.startup.homepage: about:blank
browser.startup.homepage_override.buildID: 20140506152807
browser.startup.homepage_override.mstone: 29.0.1
browser.tabs.drawInTitlebar: false
browser.tabs.onTop: false
dom.mozApps.used: true
extensions.lastAppVersion: 29.0.1
font.default.x-western: sans-serif
font.internaluseonly.changed: true
font.name.sans-serif.x-western: Montserrat
font.name.serif.x-western: Montserrat
network.cookie.prefsMigrated: true
network.dnsCacheEntries: 0
network.dnsCacheExpiration: 0
places.database.lastMaintenance: 1400218745
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_bgcolor: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_bgimages: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_colorspace:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_command:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_downloadfonts: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_duplex: -983728976
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_bottom: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_left: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_right: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_top: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_evenpages: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_footercenter:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_footerleft: &PT
print.printer_\\tina\Kajan_HP_LJ_P2055.print_footerright: &D
print.printer_\\tina\Kajan_HP_LJ_P2055.print_headercenter:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_headerleft: &T
print.printer_\\tina\Kajan_HP_LJ_P2055.print_headerright: &U
print.printer_\\tina\Kajan_HP_LJ_P2055.print_in_color: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_bottom: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_left: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_right: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_top: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_oddpages: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_orientation: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_page_delay: 50
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_data: 9
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_height: 11,00
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_name:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_size_type: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_size_unit: 1
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_width: 8,50
print.printer_\\tina\Kajan_HP_LJ_P2055.print_plex_name:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_resolution: 1
print.printer_\\tina\Kajan_HP_LJ_P2055.print_resolution_name:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_reversed: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_scaling: 1,00
print.printer_\\tina\Kajan_HP_LJ_P2055.print_shrink_to_fit: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_to_file: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_bottom: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_left: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_right: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_top: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_bgcolor: false
print.printer_\\tina\NRG_MP_C3501_PS.print_bgimages: false
print.printer_\\tina\NRG_MP_C3501_PS.print_colorspace:
print.printer_\\tina\NRG_MP_C3501_PS.print_command:
print.printer_\\tina\NRG_MP_C3501_PS.print_downloadfonts: false
print.printer_\\tina\NRG_MP_C3501_PS.print_duplex: -983728976
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_bottom: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_left: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_right: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_top: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_evenpages: true
print.printer_\\tina\NRG_MP_C3501_PS.print_footercenter:
print.printer_\\tina\NRG_MP_C3501_PS.print_footerleft: &PT
print.printer_\\tina\NRG_MP_C3501_PS.print_footerright: &D
print.printer_\\tina\NRG_MP_C3501_PS.print_headercenter:
print.printer_\\tina\NRG_MP_C3501_PS.print_headerleft: &T
print.printer_\\tina\NRG_MP_C3501_PS.print_headerright: &U
print.printer_\\tina\NRG_MP_C3501_PS.print_in_color: true
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_bottom: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_left: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_right: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_top: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_oddpages: true
print.printer_\\tina\NRG_MP_C3501_PS.print_orientation: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_page_delay: 50
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_data: 9
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_height: 11,00
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_name:
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_size_type: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_size_unit: 1
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_width: 8,50
print.printer_\\tina\NRG_MP_C3501_PS.print_plex_name:
print.printer_\\tina\NRG_MP_C3501_PS.print_resolution: 1
print.printer_\\tina\NRG_MP_C3501_PS.print_resolution_name:
print.printer_\\tina\NRG_MP_C3501_PS.print_reversed: false
print.printer_\\tina\NRG_MP_C3501_PS.print_scaling: 1,00
print.printer_\\tina\NRG_MP_C3501_PS.print_shrink_to_fit: true
print.printer_\\tina\NRG_MP_C3501_PS.print_to_file: false
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_bottom: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_left: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_right: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_top: 0
privacy.cpd.siteSettings: true
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.timeSpan: 0
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1399495195
user.js-inställningar
Din profilmapp innehåller en user.js-fil som inkluderar inställningar som inte har skapats av Firefox.
Grafik
Adapter-RAM: 512
Adapterbeskrivning: NVIDIA GeForce 7950 GT
Adapterdrivrutin: nvd3dumx,nvd3dum
ClearType-parametrar: D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ] D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ]
DirectWrite aktiverat: false (6.2.9200.16492)
Drivrutinsdatum: 1-31-2013
Drivrutinsversion: 9.18.13.783
Enhets-ID: 0x0295
GPU #2 aktiv: false
Grafikaccelererade fönster: 1/1 Direct3D 9
Leverantörs-ID: 0x10de
WebGL-renderare: Google Inc. -- ANGLE (NVIDIA GeForce 7950 GT Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: skia
AzureContentBackend: cairo
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Tillgänglighet
Aktiverad: false
Förhindra tillgänglighet: 0
Biblioteksversioner
NSPR
Förväntad minimiversion: 4.10.3
Version som används: 4.10.3
NSS
Förväntad minimiversion: 3.16 Basic ECC
Version som används: 3.16 Basic ECC
NSSSMIME
Förväntad minimiversion: 3.16 Basic ECC
Version som används: 3.16 Basic ECC
NSSSSL
Förväntad minimiversion: 3.16 Basic ECC
Version som används: 3.16 Basic ECC
NSSUTIL
Förväntad minimiversion: 3.16
Version som används: 3.16

Many site issues can be caused by corrupt cookies or cache. 
Clear the Cache 
'''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
 and 
Remove Cookies '''''Firefox/Tools > Options > Privacy.''''' 
Under '''History''', select Firefox will '''Use Custom Settings'''. 
There is a button on the right side called '''Show Cookies'''. 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Poke around safe web sites and see if there is still a problem. Then restart.
 
This may or may not help you; 
'''''[https://addons.mozilla.org/en-US/firefox/addon/nosquint/?src=external-Add-ons_Manager_Context_Menu-extension NoSquint]''''' 
NoSquint allows you to adjust the text-only and full-page (both text and images) zoom levels as well as color settings both globally (for all sites) and per site.

Problem with Request for Permissions (mobile app)

In my application I want to publish the results of the games on facebook. I used this tutorial: http://www.adobe.com/devnet/facebook/articles/flex_fbgraph_pt1.html
Here is a fragment of my source code:
<fx:Script>
 <![CDATA[
 import com.facebook.graph.FacebookMobile;
 import mx.events.Request;
 import valueObjects.GlobalVariables;
 protected var extendedPermissions:Array = ["publish_stream","user_website","user_status","user_about_me"];
 protected function initApp():void
 FacebookMobile.init("app ID",loginHandler);
 protected function loginHandler(success:Object,fail:Object):void
 if(success){
 currentState="loggedin";
 nameLbl.text=success.user.name;
 userImg.source=FacebookMobile.getImageUrl(success.uid,"small");
 birthdayLbl.text=success.user.birthday;
 FacebookMobile.api("/me/statuses",getStatusHandler);
 else{
 this.login();
 protected function login():void
 FacebookMobile.login(loginHandler, stage, []);
 protected function logout():void
 FacebookMobile.logout();
 currentState="loggedout";
 protected function getStatusHandler(result:Object, fail:Object):void
 statusLbl.text=result[0].message;
 protected function submitPost():void
 FacebookMobile.api("/me/feed",submitPostHandler,{message:GlobalVariables.d.toString()}, "POST");
 protected function submitPostHandler(result:Object,fail:Object):void
 FacebookMobile.api("/me/statuses",getStatusHandler);
 ]]>
 </fx:Script>
I have problem with permissions. After login I see a white screen instead of request for permission. The desktop application does not have a problem with it. When I log for the first time to the desktop application and I will give the permissions applications, then in the mobile application everything works fine. But this is not a good solution. And so please help.

The labelField of IconItemRenderer only supports single line text. Try using the messageField instead:
<s:List width="200" height="200">
 <s:dataProvider>
 <s:ArrayList>
 <s:DataItem desc="1 Hello World Hello World Hello World" />
 <s:DataItem desc="2 Hello World Hello World Hello World" />
 <s:DataItem desc="3 Hello World Hello World Hello World" />
 </s:ArrayList>
 </s:dataProvider>
 <s:itemRenderer>
 <fx:Component>
 <s:IconItemRenderer labelField="" messageField="desc">
 </s:IconItemRenderer>
 </fx:Component>
 </s:itemRenderer>
</s:List>
If you need more control you might need to subclass, this post might help: http://flexponential.com/2011/08/21/adding-multiline-text-support-to-labelitemrenderer/

Google mobile problem with 3G S

Similar Messages

Maybe you are looking for