Google Notifier doesn't start at login
Option "Start Google Notifier at login" is checked, but it doesn't start automatically.
Does any one meet the same problem with me?
Yeah, got the same problem. On my old MBP with Snow Leopard always started automatically. Since I got MBA with Mountain Lion, not auto-start. In my opinion, buggy with the new OS.
Similar Messages
-
Finder doesn't start at login, can't logout/restart
After installing 10.5 I got the desktop screen without any icons or the menu bar. I was able to see the dock fine, so I clicked on Finder (it wasn't running) and started it. I thought everything was fine at this point, but after running Software Update the Mac wouldn't reboot, giving me various errors each time that a different application wouldn't quit and was preventing logout. In each case the application DID quit successfully. I have tried to manually select Logout User..., Restart... and Shut Down... however after the finder quits I get a message that the Finder won't quit and so the task cannot be accomplished. The only way to try again is to start up the Finder again and select an option which results in the same error.
This may not be a great help, but it's what I'm in the process of doing to solve the same issue on my mac mini.
I'm booting from the Mac 10.5 install DVD again, then when it's asking me where I'd like to install, I'm going to the disk utility, from the menu at the top.
From there, I've selected my boot disk and (not the partition) and clicked new image. I then saved the image to an external drive.
Once that's finished, I'm going to do an erase an install.
Once the install is complete, I'll mount the dmg file I created and use Migration assistant to get all my settings and programs back.
It's a PITA, but I'm a big believer of wiping things and starting from scratch if an upgrade doesn't go well.
If you like, I'll post back when I'm done to let you know if this worked? -
Gnome-settings-daemon sometimes doesn't start
Hey guys. I have an occasional problem where the gnome-settings-daemon doesn't start on login. If I log out and then back in it usually starts. Or, I can run it by hand and everything works fine. It's not a big deal, but it's a little annoying. Has anybody run into this or does anybody know of a log file or something I can check to see why it doesn't come up?
Thanks
-mS
Last edited by aglarond (2009-01-25 01:01:02)I had this problem, and I have a very fresh arch install; no old homedir, and gnome was installed at version 2.24.1 (current).
However the problem seems to have gone away once I cleared out the files in my $HOME/.config/autostart/
That directory had some .desktop files, including gnome-settings-daemon-helper.desktop (but not gnome-settings-daemon.desktop!).
Actually I find it weird that gnome-settings-daemon.desktop resides (on my system) in /etc/xdg/autostart, whereas gnome-settings-daemon-helper.desktop is in /usr/share/gnome/autostart/.
I'm not sure what the significance of any of this is, or if my entire experience (rm ~/.config/autostart/*) even makes sense. But see if it works for you
Edit: Nevermind, I still have this problem happen sporadically; the above solved nothing, it seems
Any ideas how we can debug this? How can I trace exactly what gnome-session is doing?
Last edited by infohigh (2009-01-29 05:26:16) -
Windows 8.1 doesn't start after update. BLACK SCREEN AFTER LOGIN
Before all, sorry my english, I'm brazilian and don't found the solution on the brazilian version of HP website.
After I did the updates, the system ask to restart the notebook, so I did it. And now, when I do the login, after the password page, the Windows doesn't starts. Just a Black Screen appears.
I can't open the right side window to acces the configurations, and this laptop doesn't have a battery to take out and put in again.
I had already restore the system.
So, I use my laptop to work, and it has only 4 days of use.
I need help! Thanks!Hi,
Run through the following procedure.
Boot the computer normally and log-in.
At the black screen, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on File and select Run new task.
Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
Type in the following command ( including spaces ) and hit enter.
Dism /Online /Cleanup-Image /RestoreHealth
This will take a while to complete, but when it’s finished, restart the notebook.
If the screen is still black after you log-in, once again, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on File and select Run new task.
Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
Type in the following command ( there's a space between sfc and the / ) and hit enter.
Sfc /scannow
When the scan has finished, check that the result is ‘No integrity violations’, then type exit and hit enter.
Restart the notebook again.
Any change?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
After installation of Solaris 10 - CDE login doesn't start
I have installed Solaris 10 on Sparc Machine but the CDE login doesn't start .
I received the message :
Suspendind Desktop Login...
If currently logged out, press [enter] for a console login promt.
desktop Login will resume shortly after you exit console session.
In the file /var/dt/Xerrors I have :
fbconsole: ioctl SRIOCSREDIR: Device busy
ioctl(MSIOSRESOLUTION): Invalid argument
ddxSUNWmouse: couldn't set absolute mouse scaling resolution on /dev/mouse
Tue Sep 12 11:54:15 2006
error (pid 2490): Can not lock pid file /var/dt/Xpid, another Dtlogin is running (pid 873)
I set the resolution of monitor for one supported :
fbconfig -res 1280x1024x60
But always I obtain the same thing,
Can someone help me ?
May thanks in advance,
LuzI don't know if it helps. But I had problems with the x-server not starting (didn't even get a gui login just command line) re-setting the network properties seemed to fix it, looks like anything dodgy in the network config stuffs up the start up proceedure.
-
I am running Firefox 3.6.3 on my Mac G5 and my MacBook.
Since I installed Firefox 3.6.3, everytime I open Google Notifier, two Firefox browser windows open. This happens on both of my computers.
This never used to happen before, in the earlier versions.
How do I make it so that only one browser window opens?
== This happened ==
Every time Firefox opened
== I installed Firefox 3.6.3 ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10_4_11; en) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7I got this all screwed up too.
hmm.. where to start?
3.6 and 4.0 beta - really aren't intended to play well together.
As has been mentioned above, they tend to write over each other.
I managed to get both 3.6.15 and 4.0 beta 12 on the same machine.
But, I had to do it several times.
I got lucky by deleting everything Mozilla, then installing 4.0b12, then 3.6.15 - while making sure that each installed into a separate folder.
I also took care to copy out a couple of BookMark BackUp files - just in case.
My old 3.6# had become so bloated - and, Unstable - for Me, it was time.
The bookmarks were all that I was still interested in.
All the Plugins, Themes, AddOns, etc... had slowed the app to a crawl.
So, I did as complete a wipe of Mozilla bloat code that I could, including profiles.
I then did some registry cleaning.
Then I installed 4.0b12 and 3.6.15.
I can't open them both at the same time.
If I open 3.6.15 first, then open 4.0b12 - the beta comes up as 3.6.15.
If I open 4.0b12 first, then open 3.6.15 - the 3.6 comes up as the beta.
This has a lot to do with both apps sharing the same default profile.
I hope to drop down to one app in the near future.
So, cobbling multiple profiles in order to diddle side by side apps - isn't worth it at this stage.
For me, I can't open FF 4.0b12 when my virus protection is running. PCTools doesn't like some thing about the way FF4.0 wants to phone home when it opens.
So, I can't commit to the 4.0b12, yet.
3.6.15 was crashing on open too - until I uninstalled the feedback addon. - go figure -.
Also, I can't get the 4.0b12 to start in safe-mode with the PCTools antivirus running.
At the rater they are going, I don't see 3.6.# going away any time soon. -
Chromium doesn't start and suspend, shutdown don't work occassionally
Hello,
I have this problem on my laptop but since chromium doesn't start on my desktop either, I don't think it's specific to laptops.
When I try to start chromium in a terminal, I get a blank window (I can tell because I use spectrwm):
ATTENTION: default value of option force_s3tc_enable overridden by environment.
[25148:25148:0215/130205:ERROR:background_mode_manager_aura.cc(14)] Not implemented reached in virtual void BackgroundModeManager::EnableLaunchOnStartup(bool)
I temporarily resorted to using Firefox instead, but at times it just freezes up while opening some pages. After that point, even killing firefox doesn't help: the system load level keeps on rising. I used pidof to check if firefox is still running, but I had no output from pidof. After having firefox to freeze, shutdown, suspend, etc don't work. The laptop goes to a black screen state, but the power LED remains on indefinitely.
These might be two separate issues, but they started together on my laptop.
Thanks in advance!
Last edited by SgrA (2015-02-15 09:47:08)I also have issues wich starting up chromium (google-chrome and opera too).
Feb 15 10:09:58 localhost kernel: [ 102.301038] chromium[786]: segfault at 7ffffd294ff8 ip 00007fb4386962b2 sp 00007ffffd295000 error 6 in chromium[7fb43371e000+66c6000]
Feb 15 10:12:16 localhost kernel: [ 240.102784] chromium D 0000000000000000 0 786 1 0x00000104
Feb 15 10:12:16 localhost kernel: [ 240.102789] ffff8800c2d5bb68 0000000000000082 ffff8800c5635a90 0000000000013640
Feb 15 10:12:16 localhost kernel: [ 240.102793] ffff8800c2d5bfd8 0000000000013640 ffffffff81818540 ffff8800c5635a90
Feb 15 10:12:16 localhost kernel: [ 240.102796] ffff8800c2d5bb78 0000000000000246 ffffffff81a52047 ffff88042f5eeb08
Feb 15 10:12:16 localhost kernel: [ 240.102799] Call Trace:
Feb 15 10:12:16 localhost kernel: [ 240.102809] [<ffffffff8109e777>] ? try_to_wake_up+0x1e7/0x380
Feb 15 10:12:16 localhost kernel: [ 240.102814] [<ffffffff81551599>] schedule+0x29/0x70
Feb 15 10:12:16 localhost kernel: [ 240.102818] [<ffffffff81553e25>] rwsem_down_write_failed+0x175/0x360
Feb 15 10:12:16 localhost kernel: [ 240.102823] [<ffffffff812c0e63>] call_rwsem_down_write_failed+0x13/0x20
Feb 15 10:12:16 localhost kernel: [ 240.102827] [<ffffffff81553604>] ? down_write+0x24/0x40
Feb 15 10:12:16 localhost kernel: [ 240.102832] [<ffffffff8122c5cd>] do_coredump+0x16d/0xf30
Feb 15 10:12:16 localhost kernel: [ 240.102837] [<ffffffff81080524>] ? force_sig_info+0xd4/0xf0
Feb 15 10:12:16 localhost kernel: [ 240.102841] [<ffffffff8107e3d7>] ? __sigqueue_free.part.15+0x37/0x40
Feb 15 10:12:16 localhost kernel: [ 240.102846] [<ffffffff8108180c>] get_signal+0x38c/0x710
Feb 15 10:12:16 localhost kernel: [ 240.102852] [<ffffffff81014617>] do_signal+0x37/0x800
Feb 15 10:12:16 localhost kernel: [ 240.102855] [<ffffffff81550f08>] ? __schedule+0x3e8/0xa50
Feb 15 10:12:16 localhost kernel: [ 240.102859] [<ffffffff81014e48>] do_notify_resume+0x68/0xa0
Feb 15 10:12:16 localhost kernel: [ 240.102863] [<ffffffff81556322>] retint_signal+0x48/0x86
Feb 15 10:12:16 localhost kernel: [ 240.102871] Watchdog D 0000000000000004 0 794 1 0x00000104
Feb 15 10:12:16 localhost kernel: [ 240.102874] ffff880402757d40 0000000000000082 ffff8800c5632840 0000000000013640
Feb 15 10:12:16 localhost kernel: [ 240.102877] ffff880402757fd8 0000000000013640 ffff880418841420 ffff8800c5632840
Feb 15 10:12:16 localhost kernel: [ 240.102880] ffff880402757ce8 ffff880402757e70 00000000ffffff92 ffff880402757c98
Feb 15 10:12:16 localhost kernel: [ 240.102883] Call Trace:
Feb 15 10:12:16 localhost kernel: [ 240.102888] [<ffffffff810dbe32>] ? hrtimer_cancel+0x22/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102893] [<ffffffff810ed4e6>] ? futex_wait+0x206/0x280
Feb 15 10:12:16 localhost kernel: [ 240.102897] [<ffffffff810dbbc0>] ? __run_hrtimer+0x250/0x250
Feb 15 10:12:16 localhost kernel: [ 240.102900] [<ffffffff81551599>] schedule+0x29/0x70
Feb 15 10:12:16 localhost kernel: [ 240.102903] [<ffffffff81553c65>] rwsem_down_read_failed+0xe5/0x130
Feb 15 10:12:16 localhost kernel: [ 240.102906] [<ffffffff810ed0d0>] ? futex_wake+0x80/0x160
Feb 15 10:12:16 localhost kernel: [ 240.102910] [<ffffffff812c0e34>] call_rwsem_down_read_failed+0x14/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102913] [<ffffffff815535d7>] ? down_read+0x17/0x20
Feb 15 10:12:16 localhost kernel: [ 240.102918] [<ffffffff81060aed>] __do_page_fault+0x1ed/0x600
Feb 15 10:12:16 localhost kernel: [ 240.102923] [<ffffffff8110e7f9>] ? seccomp_phase1+0x99/0x210
Feb 15 10:12:16 localhost kernel: [ 240.102927] [<ffffffff81060f22>] do_page_fault+0x22/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102930] [<ffffffff81557598>] page_fault+0x28/0x30
Feb 15 10:12:43 localhost kernel: [ 267.288947] chromium[920]: segfault at 7fff3faceff8 ip 00007fa90fcc62bc sp 00007fff3facf000 error 6 in chromium[7fa90ad4e000+66c6000]
It started happening after upgrade:
[2015-02-15 09:43] [ALPM] upgraded chromium (40.0.2214.94-1 -> 40.0.2214.111-1)
I was wondering if it has anything to do with some X-related upgrades:
[2015-02-15 09:42] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:43] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:48] [ALPM] upgraded xorg-server-devel (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:45] [ALPM] upgraded nvidia (346.35-5 -> 346.35-6)
I tried to downgrade chromimu to 40.0.2214.94-1 and it didn't help. I tried to downgrade nvidia, xorg-server and xorg-server-devel to previous versions, when everything worked and X chouldn't start.
Other observations are that if I start chromium, the ps command hangs and I have to reboot the system to be able to use ps command again.
Linux lisa 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
It's worth mentioning that I also run spectrwm, like SgrA, however i don't have other issues with freezing on shutdown etc. -
Dremweaver CC doesn't start on Mac os maverick
Hi
I've installed Dreamwear CC but it doesn't start... when i click on it, simply nothing happen.
i've read in forum some solutions and tryed but without success ( uninstalled java ecc...) but seem's nobody's had my problem...
No problem with other apps ( i've complete CC suite).
If can be helping on my mac there's yet installed old version of dw (CS5)
...any suggestion??
Thanks
GiovanniHi ben,
Thanks for advice.
I read all info but my configuration doesn't have nothing wrong....
Anyway i SOLVED downloading directly dreamweaver from adobe site ( before i had try to install from creative clud manager), then login with my account to activate it.
Giovanni -
IMovie 9.0.9 doesn't start with yosemite
Good morning, I've found in Application folder that there's the old iMovie 9.0.9, but when I try to launch it, it doesn't start ....
But, If I select the package content of the App (mouse right click) and double click over "iMovie EXE", only in this cas, I can use iMovie 9.0.9 (it starts) .....
In the same time runs also "Terminal" with this text message ......
Can I do something to unable the icon of iMovie 9.0.9 or under Yosemite is it impossible ?
ps. I prefer iMovie 9.0.9 because I can still use chapter marker that I make with iMovie 9.0.9 with iDVD ......
This is the message :
Last login: Wed Dec 3 00:55:54 on ttys004
iMac-di-xxxxxxxxxxxx:~ Emiliano$ /Applications/iMovie\ 9.0.9/iMovie\ 9.0.9.app/Contents/MacOS/iMovie ; exit;
2014-12-03 00:55:55.666 iMovie[976:623546] Preflight for plugin com.apple.ILPhotosPlugin failed, so it will not load. Error Domain=NSCocoaErrorDomain Code=3585 "Impossibile caricare il bundle “iLMBPhotosPlugin” perché non contiene alcuna versione per l'attuale architettura." (dlopen_preflight(/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin): no suitable image found. Did find:
/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin: mach-o, but wrong architecture) UserInfo=0x7c414e50 {NSLocalizedRecoverySuggestion=Provare a installare una versione universale del bundle., NSFilePath=/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin, NSLocalizedFailureReason=Il bundle non contiene alcuna versione per l'architettura attuale., NSLocalizedDescription=Impossibile caricare il bundle “iLMBPhotosPlugin” perché non contiene alcuna versione per l'attuale architettura., NSDebugDescription=dlopen_preflight(/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin): no suitable image found. Did find:
/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin: mach-o, but wrong architecture, NSBundlePath=/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin}
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: conn 0x21fe7 legacy 1
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: Backtrace (at 8372.02):
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 0 CoreGraphics 0x9643c2c7 CGSBacktraceCreate + 69
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 1 CoreGraphics 0x964e9c3e _ZN16CGSUpdateManager21disable_update_legacyEv + 72
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 2 CoreGraphics 0x964e9bec CGSDisableUpdate + 42
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 3 iMovie 0x001be2af iMovie + 1594031
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 4 iMovie 0x001b490b iMovie + 1554699
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxi.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 5 iMovie 0x000af5fd iMovie + 484861
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxi.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 6 iMovie 0x000e5df0 iMovie + 708080
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 7 iMovie 0x00155d32 iMovie + 1166642
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 8 Foundation 0x949504a3 __57-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke + 50
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 9 CoreFoundation 0x9c0bd6e4 __CFNOTIFICATIONCENTER_IS_CALLING_OUT_TO_AN_OBSERVER__ + 20
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 10 CoreFoundation 0x9bf9e3f1 _CFXNotificationPost + 3713
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 11 Foundation 0x9493e3c4 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 12 Foundation 0x9495cc32 -[NSNotificationCenter postNotificationName:object:] + 56
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 13 AppKit 0x9361ea47 -[NSTableView _sendSelectionChangedNotificationForRows:columns:] + 169
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 14 AppKit 0x9356d85f -[NSTableView _enableSelectionPostingAndPost] + 410
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 15 AppKit 0x9361e539 -[NSTableView _doSelectIndexes:byExtendingSelection:indexType:funnelThroughSingleIndexVersion :] + 3171
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 16 AppKit 0x9361d8c3 -[NSTableView selectRowIndexes:byExtendingSelection:] + 137
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 17 iMovie 0x00155882 iMovie + 1165442
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 18 iMovie 0x00151fd8 iMovie + 1150936
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 19 Foundation 0x949a8716 __NSFireDelayedPerform + 489
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 20 CoreFoundation 0x9c04db06 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 22
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 21 CoreFoundation 0x9c04d5b4 __CFRunLoopDoTimer + 1316
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxi.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 22 CoreFoundation 0x9c0c8fff __CFRunLoopDoTimers + 351
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 23 CoreFoundation 0x9c006121 __CFRunLoopRun + 2081
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxxi.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 24 CoreFoundation 0x9c005696 CFRunLoopRunSpecific + 390
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 25 CoreFoundation 0x9c0054fb CFRunLoopRunInMode + 123
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 26 HIToolbox 0x971c4178 RunCurrentEventLoopInMode + 262
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 27 HIToolbox 0x971c3eb1 ReceiveNextEventCommon + 494
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxxi.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 28 HIToolbox 0x971c3cac _BlockUntilNextEventMatchingListInModeWithFilter + 99
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 29 AppKit 0x93503d99 _DPSNextEvent + 734
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 30 AppKit 0x935035e1 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 186
Dec 3 00:56:20 iMac-di-Emiliano-xxxxxxxx.local iMovie[976] <Warning>: void CGSUpdateManager::log() const: 31 iMovie 0x000895be iMovie + 329150
[Ripristinato]
Last login: Wed Dec 3 10:01:25 on console
iMac-di-xxxxxxxxxxxxx:~ Emiliano$
[Ripristinato]
Last login: Wed Dec 3 10:50:46 on ttys001
iMac-di-xxxxxxxxxxxx:~ Emiliano$Sorry, able instead of "unable"
-
VMWare doesn't start after kernel update
Hello,
I've just updated my kernel to 3.10.0-997-generic. After that VMWare Player doesn't start anymore.
I've tried to run patches and different solutions I found in google, but it didn't worked yet.
This is the log of my last attempt.
Thanks in advance
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Log for VMware Workstation pid=14806 version=9.0.2 build=build-1031769 option=Release
2013-06-14T21:42:29.306-03:00| vthread-3| I120: The process is 64-bit.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Host is Linux 3.10.0-997-generic Ubuntu 12.10
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Failed to load user preferences.
2013-06-14T21:42:29.306-03:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-14806.log
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmmon module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmnet module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmblock module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmci module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vsock module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Setting vsock to depend on vmci.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Created new pathsHash.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Invoking modinfo on "vmmon".
2013-06-14T21:42:29.320-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-14T21:42:29.320-03:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-14T21:42:29.322-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.322-03:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-14T21:42:29.324-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.324-03:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-14T21:42:29.326-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.326-03:00| vthread-3| I120: Invoking modinfo on "vsock".
2013-06-14T21:42:29.328-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Obtaining info using the running kernel.
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Setting header path for 3.10.0-997-generic to "/lib/modules/3.10.0-997-generic/build/include".
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.351-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.351-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Kernel header path retrieved from FileEntry: /lib/modules/3.10.0-997-generic/build/include
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Update kernel header path to /lib/modules/3.10.0-997-generic/build/include
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.523-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.523-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.524-03:00| vthread-3| I120: Found compiler at "/usr/bin/gcc"
2013-06-14T21:42:29.526-03:00| vthread-3| I120: Got gcc version "4.7".
2013-06-14T21:42:29.526-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.526-03:00| vthread-3| I120: Using user supplied compiler "/usr/bin/gcc".
2013-06-14T21:42:29.528-03:00| vthread-3| I120: Got gcc version "4.7".
2013-06-14T21:42:29.528-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.532-03:00| vthread-3| I120: Trying to find a suitable PBM set for kernel "3.10.0-997-generic".
2013-06-14T21:42:29.532-03:00| vthread-3| I120: No matching PBM set was found for kernel "3.10.0-997-generic".
2013-06-14T21:42:29.532-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.538-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.538-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.538-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.539-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.545-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.545-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.545-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.545-03:00| vthread-3| I120: Using temp dir "/tmp".
2013-06-14T21:42:29.547-03:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-14T21:42:29.548-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.548-03:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-14T21:42:29.550-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.550-03:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-14T21:42:29.552-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:30.327-03:00| vthread-3| I120: Setting destination path for vmnet to "/lib/modules/3.10.0-997-generic/misc/vmnet.ko".
2013-06-14T21:42:30.327-03:00| vthread-3| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2013-06-14T21:42:30.332-03:00| vthread-3| I120: Successfully extracted the vmnet source.
2013-06-14T21:42:30.332-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmnet-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:31.977-03:00| vthread-3| W110: Failed to build vmnet. Failed to execute the build command.
2013-06-14T21:42:31.979-03:00| vthread-3| I120: Setting destination path for vmblock to "/lib/modules/3.10.0-997-generic/misc/vmblock.ko".
2013-06-14T21:42:31.979-03:00| vthread-3| I120: Extracting the vmblock source from "/usr/lib/vmware/modules/source/vmblock.tar".
2013-06-14T21:42:31.990-03:00| vthread-3| I120: Successfully extracted the vmblock source.
2013-06-14T21:42:31.990-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmblock-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:33.429-03:00| vthread-3| W110: Failed to build vmblock. Failed to execute the build command.
2013-06-14T21:42:33.431-03:00| vthread-3| I120: Setting destination path for vmci to "/lib/modules/3.10.0-997-generic/misc/vmci.ko".
2013-06-14T21:42:33.431-03:00| vthread-3| I120: Extracting the vmci source from "/usr/lib/vmware/modules/source/vmci.tar".
2013-06-14T21:42:33.445-03:00| vthread-3| I120: Successfully extracted the vmci source.
2013-06-14T21:42:33.446-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmci-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:35.773-03:00| vthread-3| I120: Successfully built vmci. Module is currently at "/tmp/modconfig-YkpUyf/vmci.o".
2013-06-14T21:42:35.773-03:00| vthread-3| I120: Found the vmci symvers file at "/tmp/modconfig-YkpUyf/vmci-only/Module.symvers".
2013-06-14T21:42:35.774-03:00| vthread-3| I120: Installing vmci from /tmp/modconfig-YkpUyf/vmci.o to /lib/modules/3.10.0-997-generic/misc/vmci.ko.
2013-06-14T21:42:35.774-03:00| vthread-3| I120: Registering file "/lib/modules/3.10.0-997-generic/misc/vmci.ko".
2013-06-14T21:42:36.234-03:00| vthread-3| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2013-06-14T21:42:36.234-03:00| vthread-3| I120: Registering file "/usr/lib/vmware/symvers/vmci-3.10.0-997-generic".
2013-06-14T21:42:36.686-03:00| vthread-3| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.Before
create file "/usr/lib/vmware/settings"
after
create file "/root/.vmware/config"
after
create file "/root/.vmware/preferences"
And after
Install the build-essential package:
sudo apt-get install build-essential
VMware Workstation 11.1.0 and Player (Pro) 7.1.0 support kernels up to 3.18. You can apply a patch:
curl http://pastie.org/pastes/9934018/download -o /tmp/vmnet-3.19.patch
cd /usr/lib/vmware/modules/source
tar -xf vmnet.tar
patch -p0 -i /tmp/vmnet-3.19.patch
tar -cf vmnet.tar vmnet-only
rm -r *-only
vmware-modconfig --console --install-all
I tried, worked -
DBConsole Service doesn't start after Install OAS F&R-Services Win 10g
Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AMHi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks. -
Cisco Works LMS 4.0 doesn´t start
Hello All
i have big trouble with me LMS 4.0 installation. I did an Upgrade from LMS 3.2 to LMS 4.0. After that the Works was running without any problems. After some days i´d tried to login on the LMS and it told me something like my lincens where corrupt or so. I´d tried to start the CiscoWorks Demon Manger but he didn´t start. OK after some investigation at the i-net i decided to perform a clean installation of the Server an Cisco Works.
So after i do thes i´d perform a restore of my old Data from LMS 3.2. Now i investicated that my ANI Server Falied to start. OK than i tried to restart the Works Demon ... f... and what will happend ?!?!?! The demon doesn´t start. Can someone help me ?!?! Please i will not perform a new istallation again.
C:\Windows\system32>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Thanks
Mario
Hi i have an update for this issues ... After i´d tried to start all Works- Services be hand ... all Services will start execpt the deamon ... When i loged in i get messages "License Server/Deamon Manager is down. Please check license.log for more information."
Thats the same situtaion befor the new installation.Hi Afroj
i´d just have an update for you and maybe for Martin. I´d checked the services and investigate that the ANIDatabase Engine
was not stoped. After i stoped the service "by Hand". I tried to reinalize the Database and see ... IT WORKS ...
D:\CiscoWorks\CSCOpx\bin>perl.exe dbRestoreOrig.pl dsn=ani dmprefix=ANI
WARNING: Existing contents of ani database will be lost.
Do you want to continue [y/n]?y
INFO: Starting the DataBase
Starting database engine aniEng
INFO: Process created
INFO: Started the Database engine : aniEng Retry 0
INFO: Started the Database engine : aniEng Retry 1
INFO: Started the Database engine : aniEng Retry 2
INFO: Started the Database engine : aniEng Retry 3
INFO: Started the Database engine : aniEng Retry 4
INFO: Started the Database engine : aniEng Retry 5
INFO: Started the Database engine : aniEng Retry 6
INFO: Started the Database engine : aniEng Retry 7
INFO: Started the Database engine : aniEng Retry 8
INFO: Started the Database engine : aniEng Retry 9
INFO: Getting message
INFO: Connect the database dsn=ani
INFO: Connected the Database
INFO: Command Executed
INFO: Connecting the Database ani
INFO: Company=Cisco Systems;Application=NMTG;Signature=010fa55157edb8e14d818eb4f
e3db41447146f1571g32125eb777a87cbf8b29a954f559d4221b792ff8
INFO: Preparing AUTH cmd
INFO: AUTH Executed
INFO: AUTH cmd finished
INFO: Stopping the Database engine ani
Stopping database engine aniEng
INFO: File not exists.SQL Anywhere Command File Hiding Utility Version 10.0.1.40
51
INFO: Database [ani] authenticated successfully.
ani database initialization is completed.
D:\CiscoWorks\CSCOpx\bin>
D:\CiscoWorks\CSCOpx\bin>pdshow ANIServer
Process= ANIServer
State = Running with busy flag set
Pid = 11136
RC = 0
Signo = 0
Start = 8/22/2011 1:01:29 PM
Stop = Not applicable
Core = Not applicable
Info = ANIServer started.
Many Thanks for your help ...
Regards
Mario -
PS CS 6 doesn't start anymore.
When I start PS CS6 I get a message to login with my Adobe-ID to test the CS6 Extended software. When I close this window CS 6 doesn't start.
But I bought a PS CS6 software two years ago and worked with this software without problems.
I upgraded from Windows 8.0 to Windows 8.1 (both 64 bit). Is this the reason?
Can you help me pls?
Best regards
HolgerYou can't. You can only reinstall the OS if the app is actually corrupt. However, have you tried to see if Safari starts in another user account on your machine? Make a test account here
> System Preferences...Users & Groups
by clicking on the + sign in the bottom left corner. Fill out the details and click 'create'.
Once you've made the new account, log out of your current account and into the new one.
Does Safari open in that account? -
Mountain Lion Setup doesn't start after reboot
I have a curious problem:
I wanted to upgrade my MBP to ML, but it doesn't work. I start the installation script, accept the licence agreement and choose the SSD as the installation target. The installation script prepares the installation (Install OS X data folder is created in the root directory) and want to restart the MBP to execute the installation.
But the restart doesn't start the upgrade, it starts the login screen and after that I'm back on my old 10.7.4-based desktop without any installation. What's getting wrong here? How can I force starting the prepared installation after reboot?
My SSD is encrypted with FileVault 2, maybe this is a relevant information.
How can I upgrade my MBP? Please help!Unfortunately this is not the reason.
It doesnt't make any difference if FIleVault is activated or not. I decrypted the complete disk, but the problem still remains.
Any ideas? I can't believe that ML ist not installable on a six-month-old MBP :-( -
Gnome 3 doesn't start = gnome-shell crashes
Well guys, I've been playing around with arch for a while, and now I have decided to test GNOME 3 by myself. So I installed gnome and gnome-extra packages, started gdm, logged into my user and... Nothing. GDM takes forever to start the session and... Well, it doesn't start the session at all. So I thought I could open gnome in the same way I open my openbox session, so I changed my exec ck-launch-session openbox-session in .xinitrc to exec ck-launch-session gnome-session.
I run startx and... Nothing! Well, it loads the wallpaper, and then the screen goes black and it says it couldn't load the session, asks me to try again.
So I realized I'd have to test some things. Well, running gnome-shell and metacity from console just shut down the X server!
And yes, I've searched in the forums, but the solutions I found didn't work for me. If you want me to post a log, or the packages installed... I dunno.
I wasn't using the testing repos when the error start. I upgraded and the error is still the same.
Guys, I just want to test this freak!
Sorry for my bad english, and thank you alreadycan you post ~/.xsession-errors after you login via GDM?
Maybe you are looking for
-
Hi, We are in the process of Migrating Cisco CUCM & Voice Gateway (From another vendor to Cisco). The requirement is all internal calls between Cisco IP Phones & Lync to be flown through CUCM. Means internal extension to extension. Remaining all call
-
Animated GIF problem saving for web in CS6
I made an animated gif in CS6 and trying to save it for the web. The duration of the animation is pretty long, about 44 seconds. After 17 seconds the animation stops while the saving was completed. How can I solve this problem? The file is too large
-
Call Forwarding Number on 3G Not Retained as it was on Original iPhone
On the original iPhone I could turn call forwarding on and off and the number I had set to have calls forwarded to was retained when I turned forwarding back on. With the 3G the number to be forwarded to needs to re-entered each time I turn call forw
-
Is BO XI 3.1 FP 2.2 good to install to resolve report hung issues.
Is BO XI 3.1 FP 2.2 good to install or have any issues with FP 2.2. - Do any one have any issues with Fp 2.2 ,please let me know, we are going to install Fp 2.2 to resolve the issue (long running report`s hung`s even a 10minutes reports,show the proc
-
Email link with no address field.
Greetings~ I'm trying to make a button that when clicked on opens an email client with an empty address field but a filled subject and body, but have no idea where to begin. The idea is that I have a "Refer me to your friends!" button, so when the us