Google Reader loads but doesn't display feed

Using Firefox 10.0.2 with Mac Lion - It works with Safari and with Windows 7 using BootCamp. Newsfeed on Facebook also doesn't work.

In the meantime, I've noticed that this may be a memory usage issue. AcroRd32.exe uses 65MB with no documents open. With a 420KB document open, it uses 119MB.
If I close enough non-Reader windows, then a document that wasn't showing then shows properly. There is technically no shortage of RAM, with Task Manager reporting 1.4GB available with other programs running. Windows sees 2.85GB total out of 4GB installed.

Similar Messages

  • Browser loads but doesn't display page

    When I click on a link my browser opens and seems to load (the percentage done increases). It is slow, but even when it reaches 100% it just stops, and nothing is displayed on the screen.
    My son's pal has fiddled with settings and fixed this, but I would like to know how to do this myself.
    Also, any idea what causes this? It seems that something I load messes up my settings.
    tks

    Could you try disabling graphics hardware acceleration? Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!

  • Safari loads but no window displayed,

    Safari seems to load but no window displayed. New Window doesn't help. Loading from Application folder, no difference. Yesterday I loaded an application DataGuardian, thought that might be confilicting so I removed it, no difference. Have rebooted several times. Looked for changes to system by date, no clue. Need a solution that doesn't require a web browser. I'm sending this from a different machine. THanks.

    Welcome to Apple Discussions
    You may have a corrupted preference file. Move to your Desktop from your User Library/Preferences folder .com.apple.safari.plist and restart Safari. Any change? If you now get a browser window, then reset the Preferences to your custom settings. If not, move the above file back to its original location replacing the newly created file.
    If no change, does the same problem occur if you open Safari from another User Account (create one if necessary in System Preferences>Accounts).
    Post back with results.

  • Page loads but will not display

    I have an IP address that allows me to view my cctv cameras.It works fine with Internet Explorer,but when i enter the same address in to my safari browser the page seems to load but will not display anything.
    I assume its some thing do with my internet security settings but do not now where to find them to allow this site. Can any one help please.
    Thanks

    Try temporarily turning off your firewall via SystemPreferences>Security>Firewall. If the site then works you can turn the firewall back on and specifically allow Safari.

  • My Contacts program opens but doesn't display on the screen (it appears to be off above the top right hand corner).

    My Contacts program appears to open, but doesn't display on the screen (it appears to be sitting just above the top right hand corner). any suggestions on how to get it back?

    Launch Contacts, then on the "Window" menu select "Zoom". That should maximise the window and give you access to the bottom-right corner where you can resize it, and the bar at the top which you can drag around.

  • HT3964 MacBook 2007 won't start up all of the way it gets the loading circle thing then it just keeps going and a bar thing pops up to load but doesn't and about a few minutes and it shut off. I don't have a disk for the computer or another Mac so what do

    need help MacBook 2007 won't start up all of the way it gets the loading circle thing then it just keeps going and a bar thing pops up to load but doesn't and about a few minutes and it shut off. I don't have a disk for the computer or another Mac so what do I do?

    I don't have the disk and i tried the shift key and it didn't do anything, i have tried like everything but it won't work and i was givin this computer with a charger and that is all nothing came with it and i don't think that it had the lion thing on it either i never got to that it just won't turn on and i have another mac that was a family members but it won't turn on either at all it won't load anything the screen stays black. so i don't really know at all what to do is there anything else? i don't want to take it anywhere because i have no money for that, and i need this computer for school. Any sugestions?

  • Creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit ), creative cloud installed and run but doesn'

    creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit ), creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit )
    don't know if it's relevant or not , I run Windows 8 64-bit

    111994 please try utilizing the steps listed in App doesn’t open | Progress wheel spins continually to resolve the current error.

  • MSI 970a-g46 motherboard starts up but doesn't display anything.

    Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
    CPU: AMD Phenom 2 x4 965
    GPU: nVidia GeForce 560 GTX
    Ram: 8gb Kingston HyperX Fury 1866mhz.
    PSU: Corsair 650TX (650 Watts)
    Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
    I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
    I've gone over and checked/tested numerous things:
    * The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
    * I've tried jumping the CMOS multiple times to no avail.
    * I tested the ram on another computer and it worked just fine on that one.
    * I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
    So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
    The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
    EDIT: Some other things I did but forgot to mention:
    * Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
    * Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
    * Re-seated GPU multiple times, re-connected cables multiple times.
    What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
    EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
    EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

    Quote from: rhradacut on 06-January-15, 16:49:14
    What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
     Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
     None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
    Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
    Once again thanks for helping out on solving my problem.

  • FF loads but does not display

    Since the upgrade to FF3.6, I've had several annoying glitches.
    1 Dclick desktop icon, FF loads into memory, but does not display. End task. Then Dclick the icon again. This time FF loads and displays normally.
    2. After closing FF with Save & Quit, next time I open FF, error message : "Well this is embarrassing, can't recover tabs". Start new session. FF opens with last tab instead of default site.
    3. On some sites I click icons and nothing happens. Sometimes other icons on same page will open, but most won't. Internet Explorer will open the same icons, so the Problem seems to be in FF.
    Am I the only one with these nuisances? Any help will be appreciated.
    == This happened ==
    Every time Firefox opened
    == after upgrade to FF 3.6

    Hello John.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • WRT54G wireless is trying to load but doesn't get anywhere!

    I have a macbook and a WRT54G with the latest firmware (just updated) and my router just stopped working out of the blue.  With airport on, it says I have full signal level and its logged into my account...when you attempt to load a page, it just keeps trying to load but it either doesn't get anywhere, or takes 10-15 minutes to load a little bit of the site (google).  Hard connection from comcast modem works fine so I know it isn't my Internet connection.
     I also have a hard line from the WRT54G to my DirectTV box, which I connected to my macbook and that doesn't work either, so I think I've eliminated a wireless only problem.  Do these things just crap out sometimes or am I missing something?  I tried with tech support and they couldn't seem to help.

    When you Hardwired your computer to the Router are you able to Browse Internet on your Computer ? Since you have upgraded the firmware on your Router, have you Resetted your Router and Re-Configure all the settings on it back again. If not then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    If your Internet Service Providor is Cable follow this link

  • IPhone 4s (6.1) gets message or whatsapp message, vibrates but doesn't display new message notification on screen

    As per title really.
    Whenever i get a text or whatsapp message my phone vibrates (sometimes twice as if i have two messages) but nothing is displayed on screen.
    This is ever since updating to 6.1

    Hi,
    I tested with Outlook 2013 and Windows 7, once the new incoming message becomes read, the "new mail" envelope disappears as it should.
    Does this issue persist if you switch the view to others? I suggest we try to start Outlook with the switch "/cleanviews" to reset default view:
    Press Win + R, type "outlook.exe /cleanviews" in the blank box, press Enter. This method resolves issues related to the corrupted views, and we can check the result again after Outlook resets default view.
    Regards,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Firefox "loads" but fails to display.

    After updating Firefox, the browser loads (it shows up as running in Task Manager) but fails to display on screen. In other words, it is completely unusable. I've uninstalled & reinstalled the program, without favorable results.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Outlook 2010 loads but does not display on monitor

    Very strange problem. When I click on Outlook 2010, the splash screen appears and it seems to load, but does not appear on my monitor. Task Managerr shows the application is running, so I guess it is there somewhere. All the other Office 2010 programs work
    fine. 
    I am running Win 7 Professional 32bit, dual core 2.7 cpu, 4 gb ram. Everything else works fine. I was having a problem with Outlook 2003 crashing and had not tried Outlook 2010.
    Have the same problem in Safe mode.
    I did run scanpst.exe and it only found (and repaired) a few files that it felt were not important. I transferred my .pst file to my wife's computer and her copy of Outlook 2010 opened it fine. I used her computer to delete all items in the
    "deleted" file. My total pst file is about 142mb. I have defragmented this hard disk. I don't have a Win7 installation disk because I downloaded the Office 2010 file and used a legitimate key to activate it
    I think there is a simple answer. Appreciate your help in finding it.

    I found my problem. 
    “Add-ons” were the source of the problem.
    I believe there was a conflict between two programs: 
    Norton’s Security Suite and AnVir Security Suite.
    Both were trying to scan my incoming e-mail. 
    I uninstalled AnVir, reset Outlook back to its original configuration (i.e. reversed all the changes I described above), and my problem is gone.
    Not sure why this problem took so long to appear as both programs had been install for at least a month without issues. 
    I used AnVir and ZoneAlarm for over a year together without issues. 
    However, about one month ago, I uninstalled ZoneAlarm and installed Norton’s Security Suite.
    In any event, uninstalling AnVir solved the problem. 
    Uninstalling Norton’s and keeping AnVir would probably work as well.

  • Flash loads, but doesn't work correctly.  Linux

    All,
    I have loaded Flash 7, or whatever the latest is for Linux.
    When I go to sites like youtube.com or anything like that that uses
    flash. The video loads, but I cannot play anything. Anyone have any
    idea why this isn't working? I have tried to reinstall the plugin
    multiple times. I am currently using Suse 10.1

    Please check
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Photo Booth wont work, it just continuously loads but doesn't let me take photos

    It was working fine. I'm not sure if there's been a recent update or something to change things.
    When I load it from my dock/applications it begins to load but continuously shows the spinning loading icon on the black screen. Its as if its not connecting to the webcam to show the image.
    Any ideas?
    Thanks

    If the photos were created on your iPhone you can directly delete them. If the photos were synced from your computer and you can't delete them on the phone. You have to sync with iTunes on computer. You add a new EMPTY folder and sync the empty folder to your iPhone at the "Photos" category.
    [I want to show you the screenshot, but i can not uplaod it.]
    Actually photos will occupy most capacity of our phone space. we want to keep the photos always and don't want to delete them. however, i would like to reduce photo size to free up our iPhone capacity

Maybe you are looking for