Google talk a few questions

I have terminated the tmobile connection on my 8320. Can I still use it to make calls through my wifi router and googletalk? The 8320 can browse the net just fine. I attempt to install googletalk from the blackberry site by browsing to: www.blackberry.com/googletalk I get the message unable to connect to the internet yet I can browse to other sites just fine. My usb port is broken so I cannot add googletalk via USB and DM.

as far as i know then yes an ext mic is required like this
http://www.apple.com/ipod/inearheadphones/
dont know if there are any 3th party options yet
and as it states it only works with ipod touch 2g devices
not the old 1g's

Similar Messages

Some Openfire/XMPP/Google Talk questions regarding SRV records

I'm trying to get my domain to have the correct SRV records so I can use my personal XMPP server to communicate to others using Google Talk. However, after I set up the SRV records correctly, when trying to connect to my XMPP server with SSL, it states that my certificate is for talk.google.com. Not really sure what's going on here... how does this work?
For the record, this is what I'm talking about: http://support.google.com/a/bin/answer. … swer=34143

The article you are referring to describes setup for Google Apps users; as you have your own server, it does not apply. Create records pointing at your server instead, as in http://wiki.xmpp.org/web/SRV_Records#XMPP_SRV_records.

How to enable usage of Jabber (& Google Talk) accounts w/Parental Controls

Hello all,
As someone who just spent a few hours trying to figure out how to get iChat in a Parental Controlled account to work with Jabber (and Google Talk) accounts, and seeing that there were no good solutions posted on these boards earlier, I just wanted to share a workaround which could potentially work for some people.
You can find the solution posted on my wiki: http://wiki.lensovet.net/EnableJabber_accounts_in_iChat_with_Parental_Controlledaccounts
Of course, the usual caveats apply: make sure you have a backup of all your data before you proceed, and I take no responsibility if things go awry. If you have any questions, please post them as replies to this thread.
Good luck! Hope you find this helpful.

Hi,
The reason I ask is that in Snow Leopard you can Add the Jabber/Google account's Buddies to the Allow List and they will work.
In Leopard this cannot be done (The Parental Controls vary in this extent).
In either case Bonjour also does not work.
Can you confirm you can Enable your Bonjour Buddy List (even if you have no other Macs) ?
Some people may find it useful to use to call kids, via Bonjour, for Tea or Dinner but still use other features of the Parental Controls.
7:34 PM Tuesday; November 30, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Sony NSZ-GS7 - Google Talk Authentication Fails + Not able to download any apps

Sony Support, please assist. I recently had freezing issues with my NSZ-GS7. I did a factory reset which fixed the freezing Now, I'm no longer able to download any applications from the Google Play Store and I receive notifications every few minutes that "google talk authentication failed". I've called support who advise only to post my question on the sony community as they had no resolution.

Sony Team, do you have a resolution for this problem ? The Tele support again just directs me to this community ?

Getting Truphone to work with Google Talk to make a free call

I'm trying to make a free call from my iPhone to my home computer using Truphone.
I installed Truphone on my iPhone and I have a Google Talk account on my Mac using Jabber in iChat. I'm trying to get the two the communicate with each other to make a phone call. Truphone requires me to call Google Talk using this number/code: [email protected] to invite it to engage in a phone call with the iPhone. Once the invite is accepted, then it will work - it says. Problem is that i cannot add this letters ([email protected]) on my iPhone to the mobile number field, only numbers. I am able to do it on my Mac and sync it to my iPhone, but for some reason the @ symbol gets dropped out of it and it won't work otherwise.
Has anyone had this same issue and was able to get it to work? Or...has anyone been able to get Truphone to be able to call their Mac using wifi to make a free call?

I sent a question to Truphone regarding this issue and this was their response. Bummer.
Dear K D,
Unfortunately it is not currently possible to dial SIP addresses
([email protected]) using the Truphone iPhone client. This includes calling
Google Talk addresses.
The Truphone service for the iPhone is an outbound calling solution. When
you're connected to Truphone you're able to make cheap Truphone calls over the
Internet. Please note that inbound calls will be received via your mobile/cell
network and not via Truphone.
New Truphone accounts for the iPhone won’t be assigned a separate Truphone
number. Instead your outgoing caller id will be presented as your
mobile/cellular number that you entered during the installation process.
Calls to other Truphone users who are using Nokia devices are free when both
parties are online.
If you have any further queries please reply to this email for assistance.
Regards,
The Truphone Support Team
Truphone
2 More London Riverside
London
SE1 2JR
UK
Web: www.truphone.com
Email: [email protected]

New to IPhone and have a few Questions?

To start I want to say that I am a long time (25+ years) veteran of technology but am new the the IPhone. My IPhone is not Jailbroken and would like to keep it that way if I can. Allthgouh I did jailbrake it with blackra1n for about 30mins then I did a factory reload and let it be as it started acting stupid once I started installing apps from unofficial sources.;) Im a x86 nerd and NOT a MAC guy. I haven't sat down at a MAC/Apple in about 15/20 years.
I just got my first IPhone 3Gs/16GB. (Coming from a BlackBerry Curve 8310) the other day and although it is taking some time getting used to, I think I will like it more then I do once I get used to it.
Anyhow I have a few questions to start off with. I did some googleing already but just want to make sure I understand a few things.
All though I did the BlackRa1n jail break thing and installed a few apps then it locked up and failed to turn on or something so I did the whole reload from itunes and now its all good. Anyhow.....
1.) It appears as if one can not run a program from the home sreen and have it run in the background while doing other things? Take the many SIP Clients I have played with in the last 48 hours. Once I open the SIP Client and connect if I hit the physical button below the screen the program closes, thus the sip client no longer works. Pretty much most if not all apps iv installed from the App Store act like this. Is this the case? Does the IPhone not mutitask at all or verywell?
2.) Are there any SIP Clients that work over 3G? All the ones iv tried say they are for WIFI only. The SIP Clients work fine when on WIFI. It sounds like this is Apples way of controlling/monopolizing the voice/data/voip aspect of the platform/device. Im sure they would lose a lot of money if everyone did what I am trying to do.Just my opinion.
3.) Maybe I play with it to much but **** the battery dies fast. Is there anyway to optimize the battery at all other then for me not to use it as much?
4.) How can I remote lock it if I lose it or it gets stolen? I read somewhere this could be done.
5.) Are there any other Shells/HomeScreens/Themes that can replace the standard 4x4x4 row icons?
6.) The speaker phone (when on a call) seems kinda low even when turned all the way up. Is there any way to make it louder?
7.) I am using the built in VPN client to connect to my works PPTP Windows 2003 VPN server but the client randomly disconnects through out the day. Is there any way to have some type of keep alive set or are there any other VPN Clients that I can use?
Sorry for all this just thought I would ask for feedback.
Many thanks for any help anyone can provide,
SomeOneOnLine

1.) It appears as if one can not run a program from the home sreen and have it run in the background while doing other things? Does the IPhone not mutitask at all or verywell?
The iPhone SDK does not permit ANY 3rd party apps from running in the background or multitasking. It does provide for push notifications which can simulate certain background activity in terms of receiving external notifications while the app is actually closed. This works reasonably well with IM apps, news, sports, weather, travel updates and some peer-to-peer games.
2.) Are there any SIP Clients that work over 3G? All the ones iv tried say they are for WIFI only.
Just how would the SIP server connect to the cell carrier 3G network? Do you know of ANY that do??
3.) Maybe I play with it to much but **** the battery dies fast. Is there anyway to optimize the battery at all other then for me not to use it as much?
3G voice and data connections are culprits. Avoid email push and frequent fetching. See this Apple article for detailed suggestions.
http://www.apple.com/batteries/iphone.html
4.) How can I remote lock it if I lose it or it gets stolen? I read somewhere this could be done.
MobileMe Find My iPhone will locate, set a passcode lock and optionally wipe all data from your iPhone. You have to be a MobileMe subscriber.
5.) Are there any other Shells/HomeScreens/Themes that can replace the standard 4x4x4 row icons?
No. Apple does not permit this.
6.) The speaker phone (when on a call) seems kinda low even when turned all the way up. Is there any way to make it louder?
You can troubleshoot your iPhone as described in the User Guide - restart, reset, reset settings, restore. Or, get hearing aids
7.) I am using the built in VPN client to connect to my works PPTP Windows 2003 VPN server but the client randomly disconnects through out the day. Is there any way to have some type of keep alive set or are there any other VPN Clients that I can use?
See this Apple support article:
http://support.apple.com/kb/HT1980
BTW, discussion of "unauthorized modifications" such as jailbreaking is prohibited under the forum Terms of Use you agreed to when joining. Best not to even mention it or risk getting your post deleted.

Login ID or password is incorrect for Google Talk in iMessage

Hi all,
Maybe this question has already occured in prior discussions, however, I cannot find any solutions yet. I can login to my gmail account, can receive emails from Mail on my Mac with no problems. However, I cannot connect to google talk in iMessage where it asks me for the password over and over again. What can I change or can anybody help me out to fix that problem?
Thank you very much.
Immanuel

iMessage is still not connecting to Google Talk, and I dont think that Google need more than a day to fix that problem. Any other suggestions? I am 100% sure that my ID and password are correct but iMessage keeps on asking me over and over again that those information will be wrong.
See picture below.
Thank you

Few questions - game loop, data types, speed

Hello, I have a few questions after studying some topics in this forum regarding game creation:
1) What's the fastest way to wait in the game loop? I've seen two approaches:
thread.sleep(10)andsynchronized(this) { wait(10); }2) What data types shall I use? In C++ I use to prefer int over short in all cases, because 32bit hardware works faster with integers. Is this same on cell phones?
3) Speed of applications is slow. I just wonder wheter it's my fault. I was testing application, which only cleared the buffer and outputted FPS and I got around 20 frames. It was Nokia 6300 with 240x320 display. After testing on other phones I've found out that the bigger the resolution, the slower the game is going. Is this normal?
Thanks for replies...

1) You're not going to notice any really speed difference between the two code snippets. Read up on 'Threads', and you'll see why one may be used in place of the other depending on the situation. In general there may be a slight performance loss, however unnoticable, when using the synchronized version, but when you are multithreading it is likely necessary.
sleep(int) is impossible to interrupt, so it's generally a no-no in most situations. However we are talking about devices where every bit of performance helps, so as long as it works for ya, it's not a big deal.
2) The performance difference is fairly negligable, if any. The biggest thing to consider is memory requirements, and shorts take 1/2 the data.
Also, many phones don't support floating point data types, so you'll likely need to use ints/longs to calculate your values if you want to have any accuracy beyond whole numbers. Doing something like shifting bits or using 1000x values in your calculations can get around most of the problems when you can't use floats.
3) The biggest performance killers are IO, memory allocation, screen drawing; pretty much in that order. So I imagine that you are re-creating a new String object every time you output your FPS value on screen right? Doing that every frame would destroy any hopes of getting high-performance.
Just be careful, and never allocate objects when you can avoid it. anything where you concat String objects using + will cause your performance to die a horrible painful slow death. Remove anything that says 'new' from your main loop, and all String operations, and it'll likely speed things up a lot for ya.
Does your main loop have something like this?
g.drawString("FPS: " + currentFps, 0,0,Graphics.TOP | Graphics.LEFT);
This is very bad because of the String operation. It'll create a new String every frame.
If you have any more specicif questions, or you'd just like to pick the brain of a mobile game dev, stop by my messageboard:
http://attackgames.proboards84.com
Message was edited by:
hooble

New to the Passport... A few questions to be answered please...

Coming from a Z30 which was with Telus. The phone was great but with Telus had nothing but problems.
Told my company that I wanted to go back with Rogers so at the same time I decided to make the jump to a Passport.
Just a few questions on the differences between the Z30 and the Passport...
#1- I noticed that if I push the button on the top of the Passport (top right) when the "home screen #1" comes on, the time and date plus my screen name and additional are displayed. Why is my screen name and additional info slightly offset to the left and not centered below the date and time?
#2- Once the screen display fades out, if I then swipe my finger across it, a new version of the "home screen" (call it home screen #2) appears with a different time and date arrangement and with no screen name and additional info. Is this normal?
#3- Am I correct to assume that once you swipe the display back on (on home screen #2) no icons show up and you must swipe it again to get to the icons. On the Z30 the initial home screen had the icons on it. So is this normal for the Passport?
#4- Finally I find that "home screen" pretty boring with its gray shade. Can I load up a background picture to it like on the Z30? If yes how do I do it?
Thanks,
Mike

1. I assume you are talking about lock screen message. It is what it is.
2 & 3. You are referring again to the lock screen, and lock screen notifications.
When you swipe up and go to the home screen, the default setting is wallpaper with no icons. There is now a setting to disable this in Display settings.
4. You can set your own wallpaper. That hasn't changed.
- Ira

A few questions from a REAL beginner

OK, so I am very very very new to HTML, CSS and Dreamweaver and I have a few questions. But before I start let me just state that I have been messing around with HTML, CSS and Dreamweaver for like one week so take it easy if these questions are obvious.
1. Is there a way to create a type of "sign in" function that is relatively easy? Or do you have to have knowledge of many different scripts and languages to do so?
2. I would like to have an archive system where if I post an article on my site and then two days later i post another one it saves the first one i posted and can be viewed in some form over time. Is this possible?
3. If multiple people will be posting on my site is there a way I can have it set up where the articles automatically say "posted by _______" after each person signs in (If #1 is possible of course)
4. And lastly, this one is similar to #2 but is there a way to make a blog type setup in Dreamweaver? Yes, yes i know there is wordpress and I frequently use wordpress but you can only have on blog page per url and i dont like that. I am trying to be able to write multiple articles in a day and would like for them all to be reached pretty easily.
Thanks in advance to the brave person who will put up with my childish questions.
And just so you all know i would like for the person answering these to explain them as if they were talking to a child lol

Heya,
First you have to choose a scripting language in order for one to direct you to tutorials on how to use it. I recommend php as it seems to be the most widely used and supported. Then go over the the Application Development forum since that's where most discussions of this nature reside.
Whatever scripting language you choose you'll have to setup a database first. I recommend MySQL; again as it seems to be the most widely used. Then connect your database to dreamweaver through the Server Behaviors window. After that you can add server behaviors to help in your development. For instance Dreamweaver has server behaviors to create registration, signup, restrict access pages. Then you can have a page that uses a Insert Record, Update Record, Remove Record server behavior to add, edit, or remove blog entries into your database. After that have another page that uses the Recordset server behavior to get a record of the database. You can then display the record on the page by dragging the value of the recordset from the Bindings Window in Dreamweaver. There's also repeat region server behavior to repeat the record to show (all or) a set amount of entries like blog1, blog2, blog 3 etc. There's also a Paging server behavior to automatically create page indexes of blog entries so first 10 on one page with links to page 1, 2, 3, 4 previous, next, first last, etc. to show additional entries on respective pages.
Your best course of action is to have a definite agenda of development goals. First choose a scripting language, then setup your database. Connect your database to Dreamweaver, then add server behaviors. That's the workflow for dynamic development. After that creating your feature is basically only a matter of what server behaviors to use and what queries to run to your database. If you have any other questions about development it may be best to ask further inquiries in the Application Development forum. If/when you do ask in the forum about stuff like this then mention what scripting language and database model you're using.
Oh and also if this is your first venture into dynamic development then do yourself a favor first and setup a local testing server on your computer. What kind of computer are you using? Mac/PC and what OS version? There's different ways of setting up a local testing server depending on your computer and OS.
I am in the Application Development forum a lot so if you have any other questions regarding dynamic application development just hit me up there.
Hope that helps!

A few questions about After Effects and CGI (Computer-generated Imagery)

Hi,
I'm very new to After Effects and this forum. But I have a few questions.
Now, I have recently started a movie project with my friend at a workshop. It's an action/sci-fi film and I'm probably going to be the editor and if needed in charge of visual and/or special effects. This sounds like a pretty big job for a noob, but we don't have a time limit with the project so there's time to learn.
But to my questions. I've thought of introducing CGI to myself (very simple of course). I've studied the use of blender, and I think I'll use it for the modelling and animation. But should Ae be used in any stage of producing the CGI or should everything be done in blender? If I do, how? Am I going in the wrong direction (wrong kind of software, etc.)?
Also, I'm not talking of fully producing the scene with the computer, but adding things like characters or items, maybe special effects.
I'm hoping for an answer to all my questions, but if you have just one or two answers I'm happy to hear them too. You're also welcome to correct me if I've misunderstood something. Please ask for further specifications if you need any!

pek859 wrote:
1. I'm very new to After Effects and this forum. But I have a few questions.
2. Now, I have recently started a movie project with my friend at a workshop. It's an action/sci-fi film and I'm probably going to be the editor and if needed in charge of visual and/or special effects. This sounds like a pretty big job for a noob, but we don't have a time limit with the project so there's time to learn.
3. But to my questions. I've thought of introducing CGI to myself (very simple of course). I've studied the use of blender, and I think I'll use it for the modelling and animation. But should Ae be used in any stage of producing the CGI or should everything be done in blender? If I do, how? Am I going in the wrong direction (wrong kind of software, etc.)?
4. Also, I'm not talking of fully producing the scene with the computer, but adding things like characters or items, maybe special effects.
5. I'm hoping for an answer to all my questions, but if you have just one or two answers I'm happy to hear them too. You're also welcome to correct me if I've misunderstood something. Please ask for further specifications if you need any!
1. Welcome to the family. AE is big, Really big. It's hard. Really hard. You have no idea how hard AE is to learr and to master.
2. No time limit is good but you will need some money.
3. This is not a Blender forum. You want to explore filmmaking, CGI and Blender-specific forums for that kind of assistance.
4. AE is for your compositing and special effects. But you will need to learn how both apps work before you can decide how to divide up your project. A comparison would be shooting your film. Are you using a DSLR? Do you know why? Or are you using a GoPro? Another example might be Apple's Final Cut Pro. You can edit audio in it but it's better to use an audio application. You can do some special effects in FCP but it's best to do complex stuff in Motion of After Effects. How do you know what app is appropriate Lots of experience. Lots of failures.
5. We were all new to AE and to vidoe editing and to special effects at one time or another. The user forums are not places to learn how to use these applications. You do that with tutorials and books and tons of time. Learning to use Blender to make a robot move is one thing. Making the robot into a character that compels the audience to care about it is quite another. Using AE to create a layer of clouds is one thing. Having those clouds react to the bow waves created by your flying robot as it approaches sonic speeds is quite another challenge.

Imessages on macbook not working. All contacts/conversations that used imessage are now switched to google talk/jabber.

imessage on my macbook has always had a few bugs...it never recieved imessages sent from other friends with iphones right away, maybe upon next start up it would, but the messages would all come out of order. It could send out messages that would then also show up on my iphone 5s.
As of today, all my conversations that were going on my imessages no longer have the contact names associated with them, just the phone numbers, and they show as offline. The text field shows that the conversations are in Google Talk (which is offline) but each of those phone numbers is associated to someone I know with an iphone and they should be imessages, not google talk buddies. I don't even have all those numbers stored in my google accounts.
I have tried altering settings both on my phone and my laptop so that only my imessages account is logged in or active and have deselected google talk, but none of the contacts come back up. Icloud is set to sync contacts with my phone and with imessages.
How can I get my contacts back under imessages?

Hi,
I have seen this with a actual Jabber account that was using Facebook chat as the Buddy list.
This seemed to loose the Real Names from the Contacts app even though the details still seemed to be in that app.
The issue was traced in that case to an issue with the Facetime server (the Facebook Chat server is supposed to check with the main server and uses this to verify "real names" and this can bypass the Mac's own Contacts app if you are not syncing with Facebook.
Have you tried restarting the computer ?
7:41 pm Sunday; February 23, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Few questions about Satellite A300D-14P functionality

I have model Satellite A300D-14P for one month. Warranty 2 yrs. I have few questions, and asking for help, and suggestions what I should do?
*My camera quality * is VERY poor, Only with very much light on, I can get generally ok picture quality. Indoor, beside turned on both options, night mode or backlight compensation I hardly can see my face, very dark and poor quality. Second problem is blue led light, it is annoying because half of picture is always blue, somehow that light taking half picture which is always blue:((( I used notebook model from L300 series ( cheaper than mine) with same camera and that blue light, it is working perfectly :(
*Battery life and start up Vista OS*? ??In power save mode hardly 1.5h ??? Just surfing and nothing else....I asked Toshiba support here in Serbia about that and they told me that it is normal, and measuring of battery life (2, ...h) by specifications, is when my display is off and computer don't do anything ??? They also told me that normal start up time for Vista OS is around 1.45min maybe more???
If I install win XP is it possible to get battery life longer?
Do I need to go in Toshiba service or what?
Thank you very much and sorry if I am boring :))))
Nikola

Hay Nikola
You are not boring at all and welcome on this forum.
I don't know where to start. ;).
I have Satellite A300-1LI in front of me and I use it about a month now. Start-up time is very interesting theme and with right configuration you can optimise it and make it much shorter as with factory setting. Please read one very interesting thread about it under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
Do the same with your Satellite and I hope you will be satisfied.
Battery running time? I must say that information about two hours is realistic and I can confirm it. The same on my Satellite. But to be honest for mobile computing it is OK. I have changed several notebooks and just business notebook Tecra has had linger battery running time. What you can do is to check Toshiba support site and pick up info about more powerful battery. I am not sure but you can use Battery Pack (Li-Ion, 9 Cell, 6000mAh).
About cam I cannot say much. On my Satellite it works OK and I am satisfied. OK the quality is not the same like on good external webcams but for integrated cam it is OK.
If you are not satisfied try to talk with nearest service or try to compare it with some other Satellite by your local dealer.
So Nikola, if you have more questions please post again.

Few questions about cs6

Hi
i have few questions about cs6
is there a way to let the ruler and straighten like cs5 ? i gave a look to my friend cs6 and cs6 ruler and straighten leave transparent image around the corner
and is there a way to set for each adjustament layer a size ? for example i like a big curve window but for example have a smaller level windows
thanks
cheers

mantralightroom wrote:
nope
The feature is there, where Christoph described it, though I would have liked it if they'd left an option for the Ruler Tool button to allow people to add "and crop" as well. But Adobe have confirmed they moved it out of there on purpose, presumably because new users would expect to crop their image using the Crop Tool, not the Ruler Tool.
mantralightroom wrote:
i would like to know if i can store the size of each dialog window
You MUST be talking about the Properties panel, where adjustment layer info is shown, because the dialogs you get when you do things like Image - Adjust - Levels or Image - Adjust - Curves is not resizeable in any way I can see. At least not on a PC.
No, there's no special option that allows dialog sizes to be saved separately. It's just one panel, and the size of the panel itself defines the size of the contents up to each of their max sizes.
-Noel

Few questions about apex + epg and cookie blocked by IE6

Hi,
I would like to ask a few questions about apex and epg.
I have already installed and configured apex 3.2 on oracle 10g (on my localhost - computer name 'chen_rong', ip address -192.168.88.175 ), and enable anonymous access xdb http server.
now,
1. I can access 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' without input username / password for realm 'XDB' in IE6;
2. I can access 'http://localhost/apex/apex_admin' , 'http://192.168.88.175/apex/apex_admin' , and I can be redirected into apex administation page after input admin/<my apex admin password> for realm 'APEX' in IE6;
3. I can access 'http://chen_rong/apex/apex_admin' in IE6, but after input admin/password , I can not be redirected into administation page, because the cookie was blocked by IE6.
then, the first question is :
Q1: What is the difference among 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' ? I have already include site 'chen_rong' into my trusted stes! why the cookie was blocked by IE6. I have already tried firefox and google browser, both of them were ok for 'chen_rong', no cookie blocked from site 'chen_rong'!
and,
1. I have tried to use the script in attachment to test http authentication and also want to catch the cookie by utl_http .
2. please review the script for me.
3. I did:
SQL> exec show_url('http://localhost/apex/apex_admin/','ADMIN','Passw0rd');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm XDB for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
MS-Author-Via: DAV
DAV: 1,2,<http://www.oracle.com/xdb/webdav/props>
Server: Oracle XML DB/Oracle Database
WWW-Authenticate: Basic realm="XDB"
Date: Tue, 04 Aug 2009 02:25:15 GMT
Content-Type: text/html; charset=GBK
Content-Length: 147
======================================
PL/SQL procedure successfully completed
4. I also did :
SQL> exec show_url('http://localhost/apex/apex_admin/','ANONYMOUS','ANONYMOUS');
HTTP response status code: 500
HTTP response reason phrase: Internal Server Error
Check if the Web site is up.
PL/SQL procedure successfully completed
SQL> exec show_url('http://localhost/apex/apex_admin/','SYSTEM','apexsite');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm APEX for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
Content-Type: text/html
Content-Length: 147
WWW-Authenticate: Basic realm="APEX"
======================================
PL/SQL procedure successfully completed
my second questions is :
Q2: After I entered into realm 'XDB', I still need went into realm'APEX'. how could I change the script show_url to accomplish these two tasks and successfully get the cookie from site.
the show_url script is as following:
CREATE OR REPLACE PROCEDURE show_url
(url IN VARCHAR2,
username IN VARCHAR2 DEFAULT NULL,
password IN VARCHAR2 DEFAULT NULL)
AS
req UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
name VARCHAR2(256);
value VARCHAR2(1024);
data VARCHAR2(255);
my_scheme VARCHAR2(256);
my_realm VARCHAR2(256);
my_proxy BOOLEAN;
cookies UTL_HTTP.COOKIE_TABLE;
secure VARCHAR2(1);
BEGIN
-- When going through a firewall, pass requests through this host.
-- Specify sites inside the firewall that don't need the proxy host.
-- UTL_HTTP.SET_PROXY('proxy.example.com', 'corp.example.com');
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
UTL_HTTP.SET_RESPONSE_ERROR_CHECK(FALSE);
-- Begin retrieving this Web page.
req := UTL_HTTP.BEGIN_REQUEST(url);
-- Identify yourself.
-- Some sites serve special pages for particular browsers.
UTL_HTTP.SET_HEADER(req, 'User-Agent', 'Mozilla/4.0');
-- Specify user ID and password for pages that require them.
IF (username IS NOT NULL) THEN
UTL_HTTP.SET_AUTHENTICATION(req, username, password, 'Basic', false);
END IF;
-- Start receiving the HTML text.
resp := UTL_HTTP.GET_RESPONSE(req);
-- Show status codes and reason phrase of response.
DBMS_OUTPUT.PUT_LINE('HTTP response status code: ' || resp.status_code);
DBMS_OUTPUT.PUT_LINE
('HTTP response reason phrase: ' || resp.reason_phrase);
-- Look for client-side error and report it.
IF (resp.status_code >= 400) AND (resp.status_code <= 499) THEN
-- Detect whether page is password protected
-- and you didn't supply the right authorization.
IF (resp.status_code = UTL_HTTP.HTTP_UNAUTHORIZED) THEN
UTL_HTTP.GET_AUTHENTICATION(resp, my_scheme, my_realm, my_proxy);
IF (my_proxy) THEN
DBMS_OUTPUT.PUT_LINE('Web proxy server is protected.');
DBMS_OUTPUT.PUT('Please supply the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the proxy server.');
ELSE
DBMS_OUTPUT.PUT_LINE('Please supplied the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the Web page.');
DBMS_OUTPUT.PUT_LINE('Web page ' || url || ' is protected.');
END IF;
ELSE
DBMS_OUTPUT.PUT_LINE('Check the URL.');
END IF;
-- UTL_HTTP.END_RESPONSE(resp);
-- RETURN;
-- Look for server-side error and report it.
ELSIF (resp.status_code >= 500) AND (resp.status_code <= 599) THEN
DBMS_OUTPUT.PUT_LINE('Check if the Web site is up.');
UTL_HTTP.END_RESPONSE(resp);
RETURN;
END IF;
-- HTTP header lines contain information about cookies, character sets,
-- and other data that client and server can use to customize each
-- session.
FOR i IN 1..UTL_HTTP.GET_HEADER_COUNT(resp) LOOP
UTL_HTTP.GET_HEADER(resp, i, name, value);
DBMS_OUTPUT.PUT_LINE(name || ': ' || value);
END LOOP;
-- Read lines until none are left and an exception is raised.
--LOOP
-- UTL_HTTP.READ_LINE(resp, value);
-- DBMS_OUTPUT.PUT_LINE(value);
--END LOOP;
UTL_HTTP.GET_COOKIES(cookies);
dbms_output.put_line('======================================');
FOR i in 1..cookies.count LOOP
IF (cookies(i).secure) THEN
secure := 'Y';
ELSE
secure := 'N';
END IF;
-- INSERT INTO my_cookies
-- VALUES (my_session_id, cookies(i).name, cookies(i).value,
-- cookies(i).domain,
-- cookies(i).expire, cookies(i).path, secure, cookies(i).version);
dbms_output.put_line('site:'||url);
dbms_output.put_line('cookies:');
dbms_output.put_line('name:'||cookies(i).name);
dbms_output.put_line('value:'||cookies(i).value);
dbms_output.put_line('domain:'||cookies(i).domain);
dbms_output.put_line('expire:'||cookies(i).expire);
dbms_output.put_line('path:'||cookies(i).path);
dbms_output.put_line('secure:'||secure);
dbms_output.put_line('version:'||cookies(i).version);
END LOOP;
UTL_HTTP.END_RESPONSE(resp);
EXCEPTION
WHEN UTL_HTTP.END_OF_BODY THEN
UTL_HTTP.END_RESPONSE(resp);
END;
/

I use oracle database enterprise edtion 10.2.0.3. I have already figured out the epg on 10.2.0.3 to support apex 3.2.
And as I described above, the apex site works fine for ip address , and localhost. but the cookie will be blocked by IE6, if I want to access the site by 'http://computername:port/apex/apex_admin'. This problem does not occured in firefox and google browser. Could someone give me answer?

Google talk a few questions

Similar Messages

Maybe you are looking for