Google tell me to insert their codes a site map in the head section before the first body section.. but where is it on my welcome page?

Google tell me to insert their codes for a site map in the <head> section before the first <body> section.. but where in exact terms is the head & body section on my 09 iwebsite?

It's been a while since I had to verify my sitemap with Google, but if I remember, there were two options for verification. The one I chose was an HTML file verification. That's a file that would be put in your Site Folder in GoDaddy. Google would then crawl your site to verify that way. I found that much easier than putting a file in the website itself.
It would be a file that looks like this:  googlebe235d8cb7e91037.html
And would live in your Site Folder on Godaddy like this:

Similar Messages

  • Transferring non purchased pdf files to icloud from iphone or ipad and   t to icloud from my iphone and according to their ad i would be avalaible to read them in my first generation ipad but no action?

    i have about 5.6 gb or more non purchased medical books as pdf files.i have just bought extra icloud space to transfer to icloud from my iphone and according to their ad i would be avalaible to read them in my first generation ipad but no action?

    sorry cancelling while transferring my question some words gone my question is: they say you are able to read and see what you upload into icloud in one time but i uploaded my non purcahesed pdf files on my iphone 4s with latest itunes version and have latest ibooks version but i can not read my pdf files on my ipad in real time and all settings are made as they said. if not available i will cancel my extra icloud storage why pay more if i have to transfer them separetly

  • When priniting jewel case inserts, my song order is reversed. The numbering is correct, but the song titles are incorrect. This only happens on jewel case inserts. Any insight would be greatly appreciated.

    When priniting jewel case inserts, my song order is reversed. The numbering is correct, but the song titles are incorrect. This only happens on jewel case inserts. Any insight would be greatly appreciated.

    Hi,
    I have exactly, exactly!! thesame annoying problem you have or had. I don't know what to do and i am reallyfrustrated with the dumb limited inside the box solutions offered to me. It'slike if you have a problem with your ipod or iphone you can either restore it,uninstall/reinstall itunes and thats pretty much it. I am sorry but that isjust f***** up.
    anyway, regardless to all that,i was wondering if you had any success in solving this problem (something otherthan using a different computer which oddly enough seemed to work for somereason..?? why???, weird) since April.
    I am on the edge of givingup.
    thank you in advance.

  • When using google I am transferred to other web search sites and not the sites I am clicking on.

    While using Google I am being connected to other search sites and not the sites I am clicking to go to.
    == URL of affected sites ==
    http://

    It has nothing to do with Firefox -- it sounds like the sites you're trying to go to are already taken down. If that's the case, try clicking the Google's results' "Cached" button, or just try the other results Google gave you.

  • SQL Loader Inserts chr(13) and chr(10) in the first column of every row.

    Hi,
    I have exported a data in a pipe delimited file using TOAD in one database. Now I want to load the data in my local database using SQL Loader. However every time I try to load the data a double quote followed by a new line is entered for the first column of each row. Unfortunately the delimited file is very big and hence can't be posted here. However I tried the same with a customized table and its data and found the same problem. Below are the table structures and control file that I used.
    create table test_sql
    a varchar2(30),
    b date
    insert into test_sql values('51146263',sysdate-3);
    insert into test_sql values('51146261,sysdate-1);
    EXPORTED PIPE DELIMITED FILE_
    A|B|!##!
    51146261|04/14/13 4:55:18 PM|!##!
    51146263|04/12/13 4:55:32 PM|!##!
    create table test_sql1 as select * from test_sql where 1=2;
    CONTROL FILE_
    OPTIONS(SKIP=1)
    LOAD DATA
    INFILE 'C:\Users\Prithwish\Desktop\Test.txt' "str '!##!'"
    PRESERVE BLANKS
    INTO TABLE TEST_SQL1
    FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
    TRAILING NULLCOLS
    A CHAR(2000),
    B DATE "MM/DD/YYYY HH12:MI:SS AM"
    select * from TEST_SQL1;
    After this when I paste it in notepad I get the following result
    A B
    51146261"     14-APR-0013 16:55:18
    51146263"     12-APR-0013 16:55:32.
    I have no idea how the quotes or the newline appear. Is this a Toad bug? Any help would be greatly appreciated. Really urgent.
    Thanks in advance
    Regards

    Hi Harry,
    I actually thought that the str !##! was causing the problem. Actually my original export has some new lines in some specific columns so I can't keep the new line as my line terminator and hence I kept the !##! as my terminator.
    When I put the same data in a notepad and load it there is no problem at all. For e.g I just typed the following in a notepad and the data loaded just fine.
    A|B|!##!
    51146261|01-01-01 10:10:10 AM|!##!
    51146263|01-01-01 11:11:11 AM|!##!
    Its just when I load the exported file there the problem arises though I have verified the file using UNIX as well using octal dump and found no hidden characters.
    Regards,
    Prithwish

  • Once image is edited- how do I save it to desktop or a file to later insert it in an illustrator layout?  I tried to save it and it saved but it opens into photoshop elements editing page

    once image is edited- how do I save it to desktop or a file to later insert it in an illustrator layout?  I tried to save it and it saved but it opens into photoshop elements editing page

    Right click > Open with and choose the program to open it.

  • Unknown error code 13014 problem, this is the first time I've ever seen it.

    After I upgraded my PC, I copied old libraries and music files from the old hard drive to the new one. I installed the newest version of iTunes (8.0.2) and when I plugged in my ipod, I saw something I had never seen. Guess what it is?
    'Unknown error code 13014!'
    I had no problems for using every function that my iPod touch and iTunes have (including Genius play list) and of course, I've been updating every version of firmwares and iTunes programs. After I googled about this incident, I figured out this problem should not be seen on the newest version of iTunes but I'm still surffering from it.
    Temporally, I turned off Genius Play List and now, that error code doesn't pop up but of course, I can not use Genius Play list because of it.
    I uninstalled and reinstalled iTunes, restored firmware, moved Library Extras & Genius.itdb and do them again and again. Of course, none of them worked.
    What can I do? Is there anyone else who is experiencing same thing to me? How can I get my Genius Play List function back?
    Please Help me. I'm desperate. :<

    Did you properly prep your new drive first?
    Drive Preparation
    1.  Open Disk Utility in your Utilities folder.  If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.
    I think you should shutdown the installer then erase the drive per the above and start again.

  • When I Google something in Fierefox 4, Google provides a drop down list of suggested options based on the first few letters, so why can't I choose an item off the list like I used to with earlier Firefox versions.

    I updated to Firefox 4 yesterday. If in Google I type say LON it gives a drop down box offering choices like 'London underground', 'London tube map'. If I want to choose one such option, I click on it, but the Firefox/Google search does nothing. I have to type the whole thing out in full. Everything worked fine with FF3.
    Robin Fuller

    Do you have the Google Toolbar?
    That problem is listed as a known issue with the Google Toolbar.<br />
    * http://www.google.com/support/toolbar/bin/static.py?page=known_issues.cs

  • I installed adobe digital editions for the first time. But i cannot activate. always the same fealure: Aktivierungsserver-Fehler Code: E_ADEPT_REQUEST_EXPIRED ... but i'm shure, the date &time is correct. I tried all suggestions in the forum

    Bei meinen Versuchen Adobe Digital Editions zu aktivieren kommt trotz richtiger ID und PW immer: "Aktivierungsserver-Fehler Code: E_ADEPT_REQUEST_EXPIRED ...
    Was kann ich tun?

    I have the same problem!! the ID adobe is right and the password as well! fuckk!!!!! please hlp us!!!

  • Please can someone explain how to delete email addresses?  I have people who when I type in their name it comes up with the correct email address but then when you hit return to confirm it promptly changes the name to someone else (always the same someone

    Please can someone explain how to delete and email address that when typed in brings up one name but when you hit return to confirm it jumps to another name.  I can't find them in my contacts list but they do come up when you type the first few letters of a name.
    EG If I type xyz and the name of the person comes up, when I press return to confirm that's the one I want then it jumps to [email protected],  always the same def address.
    I can't fathom it out.
    Thanks
    Terri

    Try this:
    Start a new email.  In the To address bar, type in xyz like you normally do, press return to confim, and when the address you want to remove shows up in the address bar, move your cursor over the address you want to delete.
    A small triangle next to the name will show up.  click on it, a drop down menu will open, click Remove from Previous Recipients List.  Then do the drop down menu again and Remove Address.
    Good luck.

  • I am trying to install 10.4 fresh onto a brand new hard drive, it is in my old macbook. When I start up the computer I hold down "C" just like all the guides tell me to and I get a flashing folder. The disc is spinning but nothing happens.

    I have also held doen the "control" key and nothing happens. The reason I am replacing the hard drive is because the previous hard drive gave me the same flashing folder and wouldn't open up to disc utility when I put in the tiger install disc. I am more of a windows guy and don't know much about mac's.

    I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
    Could be you have the wrong cd/dvd.  The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
    When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
    Not sure.  Could be your machine does not support the startup manager. You would think the machine would ignore the key.
    Where did you get the dvd?  What is the number on the DVD?
    What machine do you have anyway?
    This site provides more information, but lacks security.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
        ( hint by K Shaffer  )

  • Insert html-code at row level (td-tag)

    Hello,
    to control the layout of a tabular form, it would be advantageous to be able to insert html-code at row level (within the td-tag) of the region table, e.g. enabling us to set a class attribute: <tr class="strut">
    I don't see a possibility to do this within a region containing numerous elements.
    Thanks in advance for any hint.
    Thomas

    Thomas,
    Do you need to control each row independently of other rows? If so, you would need to have a look at using collections instead of the Tabular Form. APEX collections let you build your own custom 'tabular form' and you should be able to control each row individually.
    If, however, all you want to be able to do is apply a format to each row, this can be done in the template.
    Cheers,
    Colin

  • How to change the profile value in the pl/sql code without making change in the database

    How to change the profile value in the pl/sql code without making change in the database.

    I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
    if these Profiles are set for the user running this program automatic printing should not be done.

  • Allowing a zero as the first digit in an insert record form field

    I have a form that has an insert record behavior applied to
    it. I would like to be able to put a number into one of the form
    fields that begins with the letter zero (i.e. 010507). The trouble
    is that when I insert any number beginning with a zero, the first
    zero in the number gets dropped when it is entered into the
    database. This occured even when I tried changing the field type
    from number to text in Access.

    Oh, I failed to change the field type to "text" in the insert
    record dialogue box as well.

  • Is is possible to insert more time to a composition in the beginning?

    Of course I know how to add time to the comp then move everything over that amount of time. That makes sense. But I was wondering if it's possible to insert a said amount of time at the first frame pushing existing frames to the end of the inserted time. Could be a timesaver for me.

    Simply adjust the comp duration, then use scripts like rd Shifter to offset all your layers by a given amount. I'm sure if one searched through AEnhancers.com and sites linked from there one could also find a smartified version that combines al lthe steps.
    Mylenium

Maybe you are looking for