Google TV Remote App

Will someone be developing a Google TV Remote App for blackberry like the android has so that I can operate my google tv and tv with my phone like my daughter does with her android?

I hope some day this will be possible!
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

Remote app for iPad Wont show songs but iPhone Will

Hi All
I have a Strange problem with airport Express and airtunes
From my iPad 4.2.1 running Remote app for iPad if i search for an artist, like Gary Moore, it shows the artist name, but when i Press the name it doesnt display the songs with this artist, it says no songs found.
But if i use the same app on both my iPhone 4 and my iPod touch, and do the same search and Press the artist name, it shows All the songs that i have with this artist
Both the iPad and the iPhone connects to the same airtunes library, on the same machine with iTunes 10.1?
Does anybody have any ideas of what is wrong
I have tried to reinstall the app on the iPad, but that diednt work, i have tried to delete the library on the iPad with no luck
Aby help would be apreciated
Sincerely
Carsten Larsen
mac mini Mac OS X (10.6.3)

I know this is an old question, but I had the same problem and found the solution somewhere else and thought I'd post it here as this thread comes up when googling for the answer.
It appears as though any songs without an "Album" don't appear. In iTunes select all songs without an album, right click and select "Get Info" and give them an Album name (e.g. "Unknown" or "Singles"). This might also apply to songs without other tags.

Iphone Remote App with Linksys having problems

Okay I have a Linksys Wirless Router, my Laptop and iphone connect to the linksys via wireless using WPA, the wireless works great, I get my iphone hooked to the wireless network .. check stocks, weather, google around.. all that works !
I use my Remote App on my iphone and sweet that works too ... connects to my library shows my playlist on itunes .. I can play rewind, skip - everything works .. for about 3 - 4 minutes ...:( I play the songs i want click on skip a couple and boom, within 3-4 minutes my entire wireless network is down !
my linksys goes into a frenzy ... If i leave the remote app alone .. my linksys would run just fine forever ... 3 - 4 minutes into using my iphone remote app and my wireless networks toast ... anyone here having the same issue ?
I have a airport express that I plan to use as my default wireless router (replacing my linksys) to see if apples own wirless router has this problem as well ..
I sure hope not ... will keep posted .. but let me know if anyone is experiencing the same problem and if there is a fix ...

Hi,
Since I upgraded the Remote software to version 1.3.3 (4) it seems that when I'm browsing the music Library of my Apple TV, I can click on any artist and or album. So far so good, but after selecting, the tracktitle is shown on top of the screen, but the track is not loaded and cannot be played.
If I unplug my Apple TV then it works again, but after browsing and changing tracks 1 or 2 times, the bug occurs again.
Martijn I've read your the post and tried to delete the songs/artists that have the word 'Edit' in it, re-synchronized the apple TV with my iTunes Library, but no luck for me.

HP Connected remote app for iPhone

I don't see the HP Connected Remote app on iTunes. Does HP realize it is not there?

OK... so you bought a HP computer... what is the model name and/or product number of the HP computer in question.
Just so you understand... the "HP Connected Remote app" available on Apple iTunes is only for Apple iPhones. This app needs to installed if, and only if, you want to stream data from your HP computer to your iPhone. You don't download this application from iTunes to install it on your HP Computer.
There is also an Android version available on Google's Play Store for Android devices.
If your HP computer came with Windows 8, it should have come with "HP Connected Remote" already installed. If not, you should be able to download the software HERE.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Unable to use FiOS Mobile Remote App on Samsung Galaxy Tab 2

I'm one of the holdout Blackberry customers who Verizon doesn't recognize as wanting apps anymore. I finally broke down and bought an Android tablet device when I saw the FiOS Mobile Remote App and recognized it as an easy solution for controling my multiple HD STBs in my "Man Cave". Unfortunately, the app has been completely useless.
The app loads fine. I'm able to register each HD STB with the app, however doing anything more than the initial set-up for the remote function results in a crash. Every time I attempt to use it, I get the message "Unfortunately, FiOS Remote has stopped." I will occassionally see the attempted connection displayed on the corner of my TV screen.
All other functions of the app work, including the DVR function.
I've reported this failure for months, using the handy little report button below the crash message. No response.
I've commented on this topic in threads from other users with the same problem. No response.
I've posted to the comments section of the Google Play store. No response.
Please, would someone from Verizon acknowledge this problem exists? My best theory so far is that my tablet device is not on a Verizon data plan (WiFi only), so therefore Verizon isn't interested in supporting it (or this loyal customer).
Device is Samsung Galaxy Tab 2, 7.0, running Android 4.0.4. All FiOs STBs replaced with latest generation.

I am sorry to hear about the troubles you are having with the app. We try to make the app as compatible with all devices as possible. The full list of devices the mobile remote is compatible with is https://www22.verizon.com/OnDemand/unprotected/AboutFlexView.aspx . You may find there may be devices that do work with it that re not on the list, but these are all verified working devices with the app. Since yours doesn't appear to be on the list, we can not gaurantee it will work. Submitting all the feedback has gotten word back to Verizon about the troubles you are having. You can also submit this to the Verizon Idea Exchange. Please search on the idea exchange and cast your vote. There may be another member who made the same suggestion. If not, please add a new idea so your fellow community members can comment and vote on your suggestion. http://forums.verizon.com/t5/Verizon-Idea-Exchange/ct-p/ideaexchange . The Verizon Idea Exchange is there for you to submit your ideas and suggestions to Verizon so that we can consider them as we innovate our products and services.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Fios remote app on android wifi only devices?

So many people these days have a tablet. Some ipad, some android. I Dont know how this topic1 applies on ipad because i do not have one.
But i have an android tablet which is wifi only. The fios remote app for android is wifi only. I cannot use it on my phone unless i am connected to wifi.
So why am i asked for the last 4 digits of my phone number?
Unless someone has a workaround for this, i cannot use the app. And to me it would be pretty cool to use this tablet as a remote. Plus i could show my pictures on tv.(assuming that function is stil there)
Ive tried a google voice number but no dice.
So does anyone know whats going on with this?
Any employees with answers?
Solved!
Go to Solution.

Ok so it looks like my problem doesnt apply anymore as it was fixed with the latest update. Silly me.
But now i am trying to find out how one connects to more then 1 device.
On the remoteapp i cant find how to add another dvr

ITunes, iPad, Remote app Home Sharing Problems. Please help!

So I have my 13" Macbook Pro with the latest version of iTunes installed (10.5.2)
I also have a 32GB Wifi iPad 2 with iOS (5.0.1) with the Remote app installed.
I am so frustrate with this stupid Home Sharing. I followed the directions the app gave me beginning with turning on Home Sharing on iTunes on my MacBook with my account. I then used the same account to turn on Home Sharing on my iPad from the Remote app. I wait a bit, and wait some more, and yet my iTunes library isn't shown in my Remote app like it is in my iPhone.
I've tried to find the answer to my problem via Google and these Apple Support Communities, but with no fix.
I wish you could just connect your device to the computer and punch in the 4-digit code like they used to have you do.
Please help! Thanks in advance.

Try turning Home Share off then on on the MacBook Pro and then check Remote App to see if now appears and you can connect - for me it works but eventually I will have to repeat the process to get it working again.
The four digit code method still works.
OS 10.7.3, iTunes 10.6.1 and iOs 5.1.1

Using RMBP in clamshell mode w/ Remote App music stops

Hi,
I've got my MacBook Pro connected to the internal DAC in my Peachtree Audio nova125 integrated stereo amplifier via USB. This allows me play music in iTunes on my MacBook Pro via my stereo speakers.
Excellent, but there's a problem...
I keep the MacBook Pro closed (I.e. It's running in clamshell mode) and use the Apple Remote app from my iPad to access my iTunes library and play music on the MacBook Pro.
This works great for about 20 seconds and then the music stops.
If I stay in the Remote App on the iPad I observe the screen refresh when the music stops, like the Remote App is re-connecting to iTunes. If I close the Remote app or switch to a different iPad app the same thing happens... The music keeps going for about 20 seconds and then stops.
After the music stops, when the Remote app screen refreshes if I left the the Remote app open, or when I re-open the Remote app if I closed it or switched to a different iPad app... The screens comes back with the same view of my iTunes library it had before, with the same song selected and paused at the same spot it stopped at.
If I then press play the music starts again and the cycle repeats.
Why?
This is clearly a flaw.
I want the music to keep playing until I go back into the Remote App (or open the MacBook Pro and go to iTunes directly) and stop it.
Any insights as to why this is happening and how to make it work properly would be greatly appreciated!
Thanks in advance.

As you can see no one has provided any info here, but I'll post what I've learned in the hopes it may help you.
Short answer: According to a local Apple Store genius, Apple does not support running a RMBP w Mavericks in clamshell mode unless the RMBP is connected to an external display.
Other info:
-I tried selecting the "Prevent App Nap" checkbox in iTunes.app>Get Info, but this doesn't make it work.
-I also Googled some info that stated there's a 3rd party app available you could install that might/should make it work, but it sounded like an inelegant solution so I didn't try it and don't have any more info on that.
-Now I either plug the RMBP into my TV via HDMI if I want to run it in clamshell, or if I don't mind leaving the RMBP open I just turn on the iTunes visualizer in full screen mode.
I hope this helps.

Google Voice Search app stopped working

Anyone else seeing this problem: Google Voice Search stopped working. The new Google app that allows voice recognition searches starts up then ends and sends me back to home screen. It was working fine yesterday.
Everything else works.
Shame it was pretty nice. Guess I'll dump it and re-load it.

ssingerss59 wrote:
Has anyone else found that the microphone feature on the X1 Remote app no longer works. It says it's initializing then disappears. For more than two months it had worked fine. No problem on this end. Maybe try deleting the app, then re-install. Good luck.

Sony Media Remote App

Hi
I have a Sony BDP s380 blu-ray player, wired (via devolo dLAN 200 AVmini powerline adaptors) to a v2 hub.
I downloaded the Sony media remote app to my iphone 4. This should allow me to control the blu-ray player from the app, but the app/iphone will not "see" the blu-ray player, so it does not work. From checking the home homepage, I can see that the iphone and blu-ray player are both connected to the network.
From some googling, there is a suggestion that it is a UPnP issue, so I was wondering whether setting up port forwarding would help (although I'm not sure this is right, given that it is not about access from outside the network).
Can someone tell me what I can do to get the devices talking to each other?
I have checked that the blu-ray player is compatible with the app - and am driving myself mad trying to get this thing to work, so and suggestions gratefully received.
Thanks

Thanks Viv
No joy (yet). Sony told me I needed to download "third party software" without being any more specific of helpful, then said I needed to speak to Apple. Apple (of course) said it was to do with Sony, but that I might want to check with BT. BT were helpful but couldn't ultimately do anything more than send me back to Sony. A much more helpful Sony person at least appeared to understand the issue and said they'd escalate it and get back in a couple of days, but I've heard nothing back from them.
I did find this site:
http://www.roomieremote.com/ip-compatibility/
which at least seems suggest a port that is used but I don't know if that is the only one, and I haven't been able to make it work by forwarding that port. If you have any more luck, I'd be keen to know.
It's hardly the biggest deal that it doesn't work (the player itself, and streaming of iplayer etc is great) but it is slightly driving me mad that there must surely be an answer out there...
Bob

ITunes and Remote app not pairing

I'm having an incredibly frustrating problem with the Remote app and I'm wondering if anyone knows what to do.
The app has worked fine in the past. I've paired it to my iTunes library successfully and controlled it.
Recently, it has stopped working. When I try to re-pair it with iTunes, one of two things will happen:
1 - I will enter the passcode and iTunes will accept it, and then on the iPhone, I just get the spinning icon and then it times out. Most times when this happens, the library name on the iPhone is blank, even though I have a name set in iTunes. In the past, when this worked right, it had the right name; or
2 - I will enter the passcode in iTunes and it will get stuck on "Verifying Remote Passcode" in iTunes. Then it times out and I'm left with no connection.
So far, in attempting to solve the problem, I've:
+ installed the latest version of iTunes
+ deleted and reinstalled the Remote app on the iPhone
+ rebooted the iPhone and my iMac, and also reset the iPhone (hold down both buttons until the Apple logo appears).
+ changed the iMac's firewall settings to "set access to specific services and applications," added iTunes to the list, and set it to allow incoming connections
+ used the "Forget all remotes" option in the iTunes settings and then tried to pair again.
I've searched google and these message boards and found plenty of others with the same problem, but no real solution (some of the things I did above came from suggestions I saw in these other threads, but none of it worked for me).
The iTunes library and the iPhone are on the same network and in iTunes, the "Look for iPhone and iPod Touch Remotes" option is checked.
Any ideas? Thanks!

I really can't believe this question has not been answered yet. I'm having the exact same problem others have described. I posted on my blog regarding this issue with screen shots of the error I've been getting: http://ben.kwinix.com/blog/2009/11/20/oh-apple-what-does-this-mean/
My network is more complicated than most: I have an Airport Extreme running a 5 GHz 'N' network and a Netgear routher running a standard 'G' network. The Airport is the primary device and acts as the DHCP server; the Netgear is set up as an extender. I use the Airport to connect my iMac, MacBook, and Apple TV and the Netgear to connect my iPhone and any other 'G' devices that come into the house. All devices when connected to either router are provided an IP address by the Airport in the "10.0.1.x" format. Also, all devices say that the "router" is 10.0.1.1, which is the Airport.
When attempting to connect to any device on the network (either iTunes library or the Apple TV) with the Remote app from the iPhone, I typically get an error regarding a firewall or network settings. Everything is fully updated - latest versions of firmware, OSes, etc.
I've followed the steps outlined in an Apple support article (http://support.apple.com/kb/TS1741) without success. Someone out there has to have an answer!

Remote app in combination with ipad music app

Hi
Can i stream music from itunes to my ipad with the remote app
In fact i'm looking for an app from which i can remote control itunes on my mac mini
and stream music to my ipad, using the same library or shared library and same app
During music discovery nights with a friend
I want to prelisten to the music with the ipad
And after the correct selection i have to swith to the remote app to play the selected song on my mac mini
I constantly have to switch between remote app and ipad music app
Which is very annoying because
- remote app looses his connection after every switch between the 2 apps
- i then have to go through the complete music library again till i have the track that i wanted to play
- and many more
Also that music app has changed since a while and doesnt offer me the same comfort scrolling through my music
I recently discovered plex and its ios app
In that app we can click on the track we need and it gives me the choice to play it on the mac mini or the ipad
Which is a really cool feature
But, ..., it doesnt have any search possibilities
In every app i tried there is always something missing to make it raeaeaeaellllllyyy eaeaeaeassssyyyyy
Isnt that what technology is supposed to offer us, make ite easy and confortable
Grrrrr
I googled for a while about it
Found no defenitive answers yet

How I wish that the Music App on my iPad could work as fast and as sleek as the Remote App when connecting to my (VERY LARGE) Library.
Even with version 1.0, every time I had to connect to my Library, the response time was just a few seconds before I can see and scroll thru my Albums/Artists/etc (with Album Art and all).
With the Music App, I haven't being able to connect to my shared library since iOS 4.0 :-( And the limited times when successfully connected the response time was JUST awful.
Please 'Remote App Team' have a beer or two with the 'Music App Team' and share your expertise with them!!! I'm begging you!!! Or at least 'tweak' your App so it can stream the music to the iPad, so we can enjoy our shared libraries on it.
Today... After updating to iTunes 11, I ( 've ?) tried to connect the Music App to my Library via Home Sharing without success. So.. Again.. Please Apple, DO SOMETHING ABOUT IT!!!
Thanks!!!

IPod Touch/Apple Remote App

Hi, all.
I am having problems setting up the Apple Remote App to use my iPod Touch as a remote with iTunes.
I have an iPod Touch 1G and am using iTunes on a Sony Vaio VGN-S5VP laptop running Windows XP Professional via a wired connection through a Netgear DG834PN router.
This is what happens when I try to use set it all up:
1) I go to Add Library on the iPod Touch and a passcode appears;
2) I click the name of my iPod Touch under Devices on iTunes;
3) The Add Remote for iPhone & iPod Touch screen appears, and I enter the passcode on iTunes (so far so good…);
4) The bar at the top of iTunes says Verifying Remote passcode;
5) The Add Remote for iPhone & iPod Touch screen reappears.
I have a feeling (although this is really just me clutching at straws a bit) that it might have something to do with the Firewall Rules settings on the router. Inbound services are set to BLOCK always. When I try to change this to allow the iPod Touch to access, I get the screen at the following link and don’t know what settings to enter:
http://picasaweb.google.com/lh/photo...eat=directlink
I would really appreciate some help!
Thanks in advance,
AK.

Sorry, that link should be:
http://picasaweb.google.com/lh/photo/lu6UWU-yjzYESvU_UlDvWA?feat=directlink
Thanks,
AK.

HP AiO Remote app will not recognize scan and copy function of HP Envy 120

Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

Replied on: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-AiO-Remote-will-n...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Hp aio remote app on iPhone won't scan to my hp photosmart 7515

hp aio remote app "there was a problem during scanning. check scanner and try again" when using hp photosmart 7515 however this is a new issue the app scanning worked before. Also I can no longer print or scan unless at home and connected to my network

Hello @mbranch37,
Welcome to the HP forums.
I understand that you are having a problem with the AIO app, as well as what sounds like a web services issue.
I would like to help.
Before working with the app, I would like to make sure the printer is fine.
On the front panel of your printer touch the Web Services icon. (also known as the ePrint button)
If you get a server connection error, I would set a manual DNS.
The following post by happytohelp01, has instructions for setting the manual DNS.
If for some reason the printers email or ePrint address has changed, you will have to set it up again.
If the email is the same and you do not get any error messages, try cycling your network.
Turn off the printer and other network devices.
Unplug the power to your router for at least a minute.
Plug the power cord back into the router.
Turn on all your network devices.
Wait until the blue wireless light on your printer stops blinking.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Google TV Remote App

Similar Messages

Maybe you are looking for