Google Won't Work

Since dowloading the updated iOS, when I try to use Google I get a message that says "No network connection." However, my Safari and other internet apps work. Any ideas?

That's weird.
If safari works, then your phone is fine.
By chance, do you have an IPv6 address? (it looks like this format: 2001:db8::ff00:42:8329)
For reference if that is the case-
http://support.apple.com/kb/TS3802

Similar Messages

Google won't work in my search bar, why?

I recently received an update to Firefox, which I believe means I received Firefox 5.0, However, now, whenever I try to use the Google Search in my search bar (the one in the upper-right-hand corner), it won't work.
Every Google search I attempt in the search bar leads me to a page that says: "404 not found" above and "nginx" below.
However, if I try to search for something on that toolbar using Bing or Yahoo, it works fine. Only Google gives me the error message.
I also get the same error message if I try using the Google search bar located on the Mozilla Firefox start page. But if I go directly to Google's homepage, my searches work fine.
The problem appears to be with the Firefox-run Google searches, because only the search bar and start page won't work.

the required ports need to be allowed on the wifi network
TCP and UDP ports used by Apple software products - Apple Support

"OK Google" won't work from lock screen in lollipop

Wishing I hadn't bothered with the lollipop update as this has really diminished my phones usage.
I had been able to use the "ok google" voice command to make phone calls, change music etc while using my bluetooth headset connected to my motorbike helmet whilst my phone was in my pocket with the screen off & locked.
Since updating to lollipop I cannot get this to work on the Z3 & I am really disappointed with this.
Reading feature articles regarding loliypop this should work from the lockscreen but it doesn't & I now really wish I hadn't bothered with this gaudy update, for me lollipop is a huge backwards step - not liking it at all.

Try doing this if you didn't do it before:
- Go to your app drawer and start "Google Settings" app
- Under "Services", select "Search & Now" -> "Voice" -> "OK Google detection"
- Check the option of "From any screen"
- Go through the voice training wizard to get the process completed.
If you find the option already active, and you had upgraded to Lollipop without resetting your device to factory settings. I'd suggest going to Settings -> Apps -> Google App -> Force stop and Clear Cache -> Restart phone -> Redo the above procedure.
Let us know if this works.
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

Links in Google won't work properly.

For example, if I type "green bay packers" in the Google window, then search, a link might appear that reads"Official Site of the Green Bay Packers" with a URL "www.greenbaypackers.com" at the bottom of the link. However, when I click the link, it'll open "Flurry", Infomation", or some other site I don't use, nor intend to use. (However, I can copy the URL & enter it into the URL box at the toppa the page & it'll work properly. My bookmarx are not bothered by this prob.)
I use Google as my home page.(Not Chrome.) The prob also exists in Safe mode.

Hello,
As I can see from the code of the page, you seems to have a invisible rectangle (one with blue border and rounded corners) on top of the iframe HTML item.
You need to select the rectangle and then Right click>Arrange>Send to back to place it behind the html.
Hope this helps.
Regards,
Sachin

Google won't work in Safari but works in FireFox?!

For the past couple of days, after doing a few searches in the Google search bar, it suddenly stops working and I get the following error message instead of Google:
Safari can’t open the page “http://www.google.com/” because it can’t find the server “www.google.com”.
If I type in www.google.com in the address bar, I get the same thing.
I'm able to search Google in Firefox and visit the site no problem.
This is VERY strange. Any idea what it could be? I reset Safair (emptied cache, cookies, etc) and doesn't fix it.

Can you take your Mac somewhere else (next door neighbour using a different ISP, or to work or something) and use the internet connection there, and do you get a different/better result there?
It sounds like you've checked all the "obvious things", and are still getting sites not found or really slow to resolve (that is when the blue progress bar in Safari stops about where the first w in www in the address bar is before the page starts to appear).
If so, something you could try fairly quickly and which has brought relief to rather a lot of people with similar-sounding issues, is you could try changing the DNS server settings on your Mac to use a different provider. NB: I'm not sure what it is that makes the difference, but something seems to have been changed in OS X which makes the Mac work badly with some ISP's DNS services, even when a PC (or a Mac running an older OS X version) is still working just fine on the same network and using the same DNS. I use the DNS servers from www.opendns.com, which are 208.67.222.222 and 208.67.220.220, but people have had good success with other providers too, I just can't remember the names or addresses offhand. Try specifying those in the network configuration on your Mac itself, or on your router if you want to change it for all machines on your network, and see if it suddenly fixes those issues for you.

The search button won't work

The search button and google won't work on the first try, it take at least a few min of pushing it before it works

Try clear the recent history:
*[https://support.mozilla.org/en-US/kb/how-do-i-clear-private-data-firefox-android?esab=a&s=clear+recent+history&r=0&as=s How do I clear private data on Firefox for Android?]

Flash won't work, neither will anything else

I'm on a Windows 7, 32bit system. My browser is IE8. My flash player version is 10,1,102,64. I recently got the Antivirus Actions virus, and I was able to get rid of it using malwarebytes, but now things like youtube, twitter, and parts of google won't work. On youtube only a black box shows where the video should be. On some websites it says that I need to upgrade my Flash plugin. On twitter it says that I need to enable javascript (I checked and it is already enabled), and on google it says that my cookies are disabled. I've tried uninstalling and reinstalling both flash and java, but nothing has changed. Because of these issues I wasn't even able to use this forum on my laptop, I had to switch to another computer. If someone can tell me how to resolve these issues I would greatly appreciate it.

I'm afraid that the system restore didn't work.
As for what you suggested for flash. I don't know what this means but when I select "flash player" from my start menu Adobe Flash CS5 pops up. Isn't that program more for making flash applications? I know that I've uploaded regular flash from adobe.

The Google Search Box won't respond and I can't composing an email in AOL won't work. I've tried on both my laptop and desktop computers. I have Firefox 3.6.8 and am a Mac user. It's not my cache because this empties everytime I close out. I've never

When typing in a google search, nothing happens. I try hitting return or clicking on search and nothing happens. I can however search by going into Advanced Search and retyping my query. I also have to retry repeated now to get an active window when I want to compose an email in aol. The window will pop up and nothing is active. This has been happening for a couple weeks now. I also have found that many times the AOL toolbar won't work...buttons are inactive and I have to quit Firefox and reload several time to access any of Firefox or AOL toolbar buttons.
== URL of affected sites ==
http://www.google.com; http://www.aol.com

If you can't get AOL to talk you thru it, then it's time to stop using AOL.
You are paying extra for a useless service. You already pay (and HAVE TO PAY) to the internet company that gives you the internet modem and conneciton to the internet, and they are be giving you 1-5 free email addresses with that account. (call them if you never set them up).
There is no guarantee you don't have a problem with your mail setup on your computer, but this is the right time for you to set up your [email protected] accounts, download all your AOL mail including your address book (FROM AOL'S WEBISTE via Safari) to your hard drive, make sure you are using an external drive with Time Machine and doing daily if not hourly backups, and start sending emails to your friends and family and business from the new mail account(s).
Otherwise you can call someone who saves computers and AOL accounts for a living and pay them $25- $100 hour....

When I type something in the Google or Youtube dialog box I can't erase it or edit it. Unable to backspace either. Cursor won't work.

When I type something in the Google or YouTube dialog box I can't tab backwards or edit the words. Cursor seems to get stuck and won't work.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I can open the web site (Chemistry) but the links within won't work, however they will in Google Chrome

I can open the web site (Chemistry) but the links within won't work, however they will in Google Chrome.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Touchgraph link browser right click won't work; jre 1.4.2_03 linux

touchgraph link browser right click won't work; jre 1.4.2
Wanted to mention that the touchgraph link browser(java client) client starts correctly in Redhat 9, but i found one problem when trying to edit links. The problem being that I can't open the small popup menu when i right click in linux RedHat 9. left clicking while dragging on a selected link (in edit mode) lets you create a new link both in microsoft windows 95a and in Redhat 9. When i right click in win95a, a small menu appears that allows me to edit a link, but this menu doesn't appear after right clicking a link in edit mode in redhat 9 (which does work with TG link browser in win95).
I tried using a 2 button mouse with 3 button emulation. I also tried to use a 3 button logitech trackball which works with the old logitech c7 setting in Redhat. I also tried to operate the mouse with it's three buttons using the number keypad in linux, which works in other applications under linux. The same problem still happens in trying all of these methods.
I was told that unix and windows use different "select," "extend," and "menu" buttons(in relation to the mouse).
Maybe, microsoft windows is using a different method of interpreting the right mouse button than redhat linux 9. if so, maybe there is a way to do this in linux (really, i have no idea how this could be done, but am open to try).
If there is a solution, i would appreciate knowing how to go about doing it. .
note: I am using Sun's java 1.4.2_04 in windows 95a and I am using Sun's java 1.4.2_03 in Redhat 9. Both are the most current, i just downloaded them recently.
note: touchgraph link browser is an open source java client and applet under the GNU general Public License. I think that the source code was included with the binary. I am using touchgraph link browser v 1.20 . I downloaded from sourceforge.net
in google i found the following:
https://lists.xcf.berkeley.edu/lists/advanced-java/1999-September/000532.html
note: mara, you helped me before when i was practically installing redhat 9 and i had a problem with the installation and you mentioned that it was a faulty cd-rom drive. with your help, i am enjoying in learning about linux for the past 5 months since your answer helped me install redhat 9 successfully. Thank you very much since my very first question to you.
Answer Hello,
I downloaded the program and, if I think of the right situation, the right-click doesn't bring a menu for me. The thing I noticed is that when I drag a new link and (with left mouse button pressed) press right button it has an effect of 'canceling' the link. That's why I think that right mouse button works correctly. The problem is why the menu does not appear.
I can see two reasons, both causing problems not easy to solve: bug in the program or incompatibility between Windows and Linux java versions. The second one should not happen.. but it doesn't mean it's impossible. A bug in the program should be easier to find, but not by me (with not very big Java experience it'd take me several days).
What I'd do in your place is to mail the program developers (or report a bug). It won't make things worse, but can fix things.
Sorry that I can't help more
Mara
notethe second half is a post i made to all experts.com

http://www.realvnc.com/pipermail/vnc-list/2001-February/020570.html
this Url has a comment on this problem in linux. just wanted to post this. it might help.

Mac Sleep Timer (through 'Energy Saver' in System Preferences) won't work

Hello,
I have a MacBook (13-inch, Mid 2009) running Mac OS X Snow Leopard 10.6.3,
and it has been installed with the latest software updates possible.
(The latest update is the 'Security Update 2010-003')
Previously I was using Mac OS X Leopard 10.5 on my MacBook,
and I can vaguely remember the timed computer sleep through Energy Saver would work.
That is, when the counter's time matches the amount of time I specified (e.g. 10 minutes), the computer enters sleep mode and displays a pulsing power light.
After upgrading to Snow Leopard I can barely remember the scheduled computer sleep will work as I don't really notice how it sleeps / I will shut down my MacBook before I go to bed.
==========
However, last night I was really tired and slept in front of my MacBook unconsciously.
When I woke up, I found that my MacBook didn't display a pulsing power light but a continuously-growing power light.
I tapped the trackpad and the display turned on, so I knew that my MacBook didn't go to sleep a whole night.
*What that means is that the Sleep Timer (through 'Energy Saver' in System Preferences) won't work.*
But the timed display sleep DOES work.
==========
After spending a whole day Googling,
I found that there are plenty of people suffering the same problem as me, although their Macs and OSs vary.
I also found an official support page from Apple concerning the related issue:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
I tried the following methods but still can't resolve the problem:
_- boot my MacBook in safe mode_
_- use the 'Disk Utility' to repair Disk Permissions through booting my MacBook from the Mac OS X Snow Leopard Installation DVD_
_- reset NVRAM (Intel-based) (as PRAM is used by PowerPC-based Macs)_
_- reset SMC (System Management Controller)_
NONE of the above-mentioned methods can resolve the problem.
Althought I am sure that the Spotlight isn't indexing the hard drive, and I just start my computer and do nothing and wait for the scheduled computer sleep, the scheduled computer sleep just won't work.
In the other Mac forum, I saw someone suggest installing an application called PleaseSleep:
http://www.dragonone.com/products/macosx/pleasesleep/
It works.
But I really want to find out what caused this problem as this is a function shipped with Mac which is expected to work normally.
What's more, Apple is claiming to be a green Apple, right?
==========
Here's the log taken from 'Console':
- Sleep by closing the lid of my MacBook:
Apr 18 13:21:05 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:21:05 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:21:07 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:23:21.028 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:1.618421972
Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:23:21.579 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:2.169138968
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Clamshell Sleep
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - EC LID0
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:23:23 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by manually clicking the Apple logo in the upper left corner of the screen -> 'Sleep':
Apr 18 13:31:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:31:46 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:31:49 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:32:04.033 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.313067079
Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:32:04.589 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.869303048
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:32:06 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by manually pressing control + eject, and the press 'Sleep':
Apr 18 13:34:17 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:34:17 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:34:46.080 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.360466003
Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:34:46.564 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.844347000
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 566 ms
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 567 ms
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:34:48 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by _turning on the application called 'PleaseSleep' based on the settings from 'Energy Saver'_:
Apr 18 13:37:22 Michael-Leungs-MacBook PleaseSleep[288]: Application is enabled
Apr 18 13:37:29 Michael-Leungs-MacBook System Preferences[1136]: * AGCAttach() failed
Apr 18 13:37:31 Michael-Leungs-MacBook [0x0-0x58058].com.apple.systempreferences[1136]: Couldn't find any matches.
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Checking sleep conditions...
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Going to sleep...
Apr 18 13:38:23 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:38:56.042 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.321902931
Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:38:56.571 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.850627959
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 707 ms
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 708 ms
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:38:58 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- If I disable 'PleaseSleep' and only depend on the non-working 'Energy Saver', nothing happens.
==========
Looking forward to your replies! Thanks in advance!

Found this discussion by googling "com.apple.systempreferencescouldn't find any matches"...
One month ago I bought a brand new Macbook Pro 13", and after a couple of weeks I realized it wasn't sleeping on its own when it should, per the system preferences. (I did sleep when I chose "Sleep" in the menus or closed it... It just wouldn't sleep on its own, while open.) What was extra frustrating was that it was intermittent... It would sleep on its own maybe 1/3 of the time, but other times it would NEVER go to sleep. I deleted PowerManagement.plist, reset the SMC, etc... No luck.
I took it to the "geniuses" at the Apple Store, and the guy took all of five minutes trying to diagnose the problem. When my MBP wouldn't sleep on its own, he promptly replaced it with a new one. That was nice, but I actually would have preferred that he diagnosed and fixed it. (I think the store was so swamped with people coming in for service that day that they were doing anything they could to close cases and get customers out of there ASAP.)
Now, sitting here with my 48-hour-old MBP, I still have the problem. The other one was so new that I had barely put anything on it yet. The only applications I had put on it were MS Office for Mac 2011, Firefox, Chrome, and Adobe Flash Player. I've put Office and Flash Player on this one, but not yet Firefox or Chrome. That's it. No other customization or fancy business.
I looked into the Console just now, and I see the "Couldn'tfind any matches" entry popping up again and again. The last three seemed to pop upright around the time when my MBP should have gone to sleep on its own, but not down to the second, so it's hard to definitively point at that and say it's it for sure.
They need to fix this!!

When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

I get a problem like yours. I have a mac mini with 2 hdds the server and hd2 I installed windows 7 and the windows works fine. except it will not allow me to get on the net. I get error 651. I can boot back to lion and the internet connection works. I googled and error 651 does seem to show up. I would like a work around.

Speakable Items won't work with my headset

Here's the deal:
When I am using the internal microphone with Speakable Items, everything works fine. (I have to lean in a bit, obviously.) But no matter what I do, my computer won't understand commands spoken through my bluetooth headset. My OS is up-to-date (10.4.10).
The headset (Plantronics Voyager 510) pairs fine with my computer, an iMac G5, and appears to work perfectly well as an input device: the readout in the Sound preference pane shows that the computer can hear my voice through it. In fact, when I go to the "Speakable Items" tab in the Speech preference pane, choose the headset (which appears as "PLT 510"), and attempt to calibrate it, the blue, green, and red readout in the Microphone Calibration window also registers my voice.
But no matter where I set the slider, no matter where I am in relation to the headset microphone, and no matter at what volume or speed I speak, the computer will not recognize commands. It can hear my voice — which I keep in the green zone — but won't understand it.
It's not just in the calibration window: it also won't work when trying to use Speakable Items in, say, the Finder. I've tried changing the input volume for the headset in the Sound preferences, having my room totally silent (including shutting off the air conditioner), calibrating with Speakable Items set to "on" and "off," and weeping and begging. I even rebooted. Nada.
Again, Speakable Items works fine when I am using the internal microphone. The one other difference I found in their behaviors is that, with the calibration slider set to low and the room silent, the internal microphone is steady at the second green bar; but the headset under the same conditions is steady at the sixth bar. In fact, in the case of the headset, moving the slider has no effect at all: it always rests on the sixth bar.
(In other news, the headset won't pair with my iBook G3 [Dual-USB] using the D-Link DBT-120 [Rev. B3]. But I guess that's a different issue altogether.)
Googling, I see plenty of happy Mac users who own my model of headset, but I can't find this problem addressed anywhere. I've looked through the forums here as well.
Thanks for reading! Can anyone help?

Sorry for the slow reply, Philip!
First of all, Macs do not yet interact in stereo with Bluetooth headsets, though according to rumour this will be available in Leopard (along with everything else).
Have you tried using the Skype Test Call feature? This is one of the easiest ways of listening back to what you record. Come to that, does it record into one of the more standard sound apps (e.g. Garage Band, Audacity, SndSampler)?
My wife has a Plantronics 590 Bluetooth headset, but when it is interacting directly via the Mac's Bluetooth she can only get the microphone to work with Skype and the Finder. And iTunes outputs only the left-hand channel, evenly split between the two channels, and the quality is horrible. If she wants to use it for any other purpose she has to connect it via the Bluetooth 3.5 mm jack adapter plugged into the headphone socket, which cuts out the headset mike as well as the internal speakers.
Though VoiceOver does work through her headset, without using the adapter, the quality is awful and VoiceOver keeps crashing. She can, however, use it for Speakable Items, though she often has to repeat herself. The calibration had to be set very high — 100% mostly.
Have you gone through the full calibration sequence, including getting all the test commands to flash?
Keep us posted!
Archie

Why Apple Thunderbolt Display won't work on BootCamp Win7 64-bit while being plugged to MBA?

Hello,
I have MBA (latest) & installed win7 64-bit in BootCamp, I do also have Apple Thunderbolt 27" Display.
When I disconnect the ATD and re-connect it in Mac OS X, it works fine like a charm, but when I disconnect then re-connect in BootCamp, it doesn't work at all whatsoever, in fact, I have to restart my MBA (while thunderbolt is connected) to make it work in BC, this is the only way to make it work.
So, my question is; If I disconnected ATD in BootCamp then re-connected it, why it won't work?
I've googled everywhere about this issue, but no luck.
Any idea?

to calculate how much video ram is needed one
take
the vertical number of pixels and * with horisontal number of pixels and * with 32bit colour which is 4 bytes
so if it's the 13" macbook air
1440 * 900 * 4 = 5.184MB for main display
+
2560 *1440 *4 = 14.75MB for second display
sounds like the intel hd 5000 would have that as dedicated memory even if the windows driver did not allow to use shared system mem as extra
could be a problem with the driver for windows
maybe a person who ran a setup like yours would have more to contribute with
my setup is an imac 21" with amd video card and a 24" dvi dell monitor and that works fine in windows so it's a different animal altogether

Google Won't Work

Similar Messages

Maybe you are looking for