Googlebar Lite is installed but space is blank

I've upgraded to Fx32 and finally had to ditch the old Google Bar because it was affecting other features (I had kept it going by updating the version in the rtf file).
I've installed Googlebar Lite instead. It appears as it should on my desktop computer, but on my laptop although there's a horizontal gap where it ought to be, there's nothing there.
Both machines run Win7 (64) and Fx32. I have tried both disabling/enabling and removing and reinstalling, with no improvement. I'm working with Version 5.0.2.
I'd be grateful for ideas as to what to try next, please.
Regards,
Tim Dawson

Hi Tim,
The support site for the addon is [http://www.borngeek.com/firefox/googlebarlite/] however if its working on one and not the other, have you tried to reinstall the addon?
It is also possible to Customize the layout from the menu path to show toolbars:
 [[Image: New Fx Menu]]   -> "+Customize"

Similar Messages

Creative Cloud installed but just a blank black box - can't access anything?

I have just started with CC - downloaded Desktop App but when I open it, it is just a black box with nothing in it?

Black Screen at Sign-in | Creative Cloud Desktop app
https://helpx.adobe.com/creative-cloud/kb/black-screen-sign-in-creative-cloud.html

My ipad is saying I have app updates to install, but won't allow me to update. The update screen is blank. Any ideas on how to fix?

My ipad is saying I have app updates to install, but won't allow me to update. The update screen is blank. Any ideas on how to fix?

There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

I formatted my macbookpro and followed the usual instructions to re-install but I get a message : Could not find installation information for this machine. This was at the OS X Utilities.My macbook is now blank.

I formatted my macbookpro and followed the usual instructions to re-install but I get a message : Could not find installation information for this machine. This was at the OS X Utilities.My macbook is now blank.

Try booting into Internet Recovery mode (booting whilst holding down the command, option and R keys). It will take a while to load as you're booting from Apple's servers across the Internet.
Once there, use Disk Utility to erase the "Macintosh HD" partition. After the drive is formatted try reinstalling the OS.
Good luck,
Clinton

Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?

Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?

Some saved Mac links that may help
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Says Flash installed but is not

Flash player says it has successfully installled, but it hasn't. See lots of other similar threads, but none of the suggestions seem to help, and our computer is not identical to any of the threads I've found.
We have two browsers - Mozilla Firefox and Internet Explorer. Mozilla Firefox works fine, no problems at all (first time).
I have tried installing on Internet Explorer multiple times, over multiple weeks, and just tried again I think three times tonight.
I changed IE to default browser (weeks ago).
I have changed settings to medium internet security and ensured scripting was enabled (which it was already, but was previously on medium high security).
Goes through initialising etc, no error messages at any point, says installation successful and you are now running Flash.
It does not come up with the agreeing to license dialogue box, or where it should say do you want automatic updates.
If try to use on any site, comes up with needing to download latest version of Flash.
If I go into Flash help sections, comes up as blank box under what version is installed.
If I go to Flash can you see the movie it also comes up with a blank box.
It does show Flash IS enabled, version 11.8.800.94
Internet Explorer we are using is Internet Explorer 10.
Is a laptop, has a 32 bit system.
OS is Windows 7.
Any ideas how I can get Flash to install (not just say it is installed, but actually installed and working), without having manual work around of copy and paste the web path to our Mozilla Firefox browser (pain because I primarily use IE because I like shortcut setup).
Thanks heaps for any help you might be able to give.
Liana

Hi Pat
Thank you for responding. Now working - thank you. Details below.
Tried to download using “Direct Links For Internet Explorer” on the link provided. I got to click the tick box “I have read and agree to the terms of the Flash Player License Agreement” and press install. (This did not come up previously, but did have downloading progress bar and Flash notification of installation successful previously.)
It then immediately came up with “the installer will automatically continue when these conflicting applications are closed: Internet Explorer.” I shut down IE, and waited 20 minutes, nothing appeared to be happening. I closed box (with cross in upper right hand corner, not pressing “quit”). No further dialogue boxes, no messages, no errors, but no successful installation either.
Redid and closed IE (and all other open programs) at point of agreeing to terms of Flash coming up and before clicking agree and install. Came up with same dialogue box “the installer will automatically continue when these conflicting applications are closed: Internet Explorer”, even though Explorer was then closed. I waited 20 minutes again, again no further messages or anything else from Adobe, again closed with cross, again no further messages or anything else from Adobe.
Redid using “Flash player for Active X (Internet Explorer)” also on page you gave link to. Did exactly the same as above.
Tried using and still no success.
Flash player was already enabled.
Active X filtering is a bit different on my explorer (IE10) – has single entry for active X, which just has a tick, viewable when just drop down the main Tools toolbar. I unchecked, and, hey presto, Flash works. I tick, and get message saying need to install, re-tick, refresh, and Flash works.
Thank you. Now just not sure if I should just take Active X filtering off all the time or not. Presumably it is to stop nasties, anyone know what the risk is? In the mean time, I'll just un-tick it when I need to use Flash.
Thanks again
Liana

I try to install this app on my phone but it doesn't install but my friends have it on their phone Samsung Exhibit II 4G

I try to install this app on my phone but it doesn't install but my friends have it on their phone and it works perfectly

Hi,
I'm sorry you are having this problem installing Firefox for Android. Is it possible that you don't have enough available space for the app? It requires 15Mb of available space to install. If you can give me a bit more information about what happens when you try to install it, I can try to provide some more suggestions.
Thanks,
Michelle

Where is Oracle Lite DB installed? In Soa Suite inst. dir? Service needed?

As far as I know Soa Suite can use a separate "full" Oracle (Express) DB.
However user can omit this separate DB and use the built-in "Oracle lite" Database.
Is this Oracle lite DB installed in the installation directory of Soa Suite or somewhere else on the hard disc?
Does it need a Win service to run (similar to "full" Oracle DB) or does it run on-demand
in AppServer?
Peter

you can go from olite to full DB, but not the other way round. When you do this change you may lose state in your inflight messages.
to migrate from olite to Oracle DB do the following:
1.) Ensure that the new target database is running.
2.) Run IRCA script to create schemas for BPEL, ESB and OWSM in the new Database:
Eg: irca all "localhost 1521 v102" welcome -overwrite3.) Make a backup of the file:
${OC4J_HOME}\config\data-sources.xml4.) Change the following ESB and BPEL connection pools to point to new DB resource.
* BPELPM_CONNECTION_POOL
* ESBAQJMSPool
* ESBPool
You can use either Enterprise Manager Console to perform this changes or edit the file: ${OC4J_HOME}\config\data-sources.xml
Below is a sample of configuration for BPELPM_CONNECTION_POOL:
<connection-pool name="BPELPM_CONNECTION_POOL">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"
user="orabpel_OracleAS_1"
password="orabpel" url="jdbc:oracle:thin:@localhost:1521:xe"/>
</connection-pool>5.) If you are changing from Olite DB to Oracle EE, look in the project's build.properties files for DB_URL and change DB_VENDOR from "olite" to "oracle"
DB_VENDOR=oracleotherwise no change is neccesary.
6.) Update ESB Metadata - Log into ESB schema (ORAESB) and change the value of DT_OC4J_HOST and DT_OC4J_HTTP_PORT to match your environment Hostname and Port and by running the following SQL script:
insert into esb_parameter values('ACT_ID_RANGE', '400');
insert into esb_parameter values('DT_OC4J_HOST', 'soainternal.mycompany.com');
insert into esb_parameter values('DT_OC4J_HTTP_PORT', '7777');
insert into esb_parameter values('PROP_NAME_INITIAL_CONTEXT_FACTORY', 'com.evermind.server.rmi.RMIInitialContextFactory');
insert into esb_parameter values('PROP_NAME_DEFERRED_TCF_JNDI', 'OracleASjms/MyTCF');
insert into esb_parameter values('PROP_NAME_DEFERRED_XATCF_JNDI', 'OracleASjms/MyXATCF');
insert into esb_parameter values('PROP_NAME_DEFERRED_TOPIC_JNDI','OracleASjms/ESBDeferredTopic');
insert into esb_parameter values('PROP_NAME_ERROR_TCF_JNDI', 'OracleASjms/MyTCF');
insert into esb_parameter values('PROP_NAME_ERROR_XATCF_JNDI', 'OracleASjms/MyXATCF');
insert into esb_parameter values('PROP_NAME_ERROR_TOPIC_JNDI', 'OracleASjms/ESBErrorTopic');
insert into esb_parameter values('PROP_NAME_ERROR_RETRY_JNDI', 'OracleASjms/ESBErrorRetryTopic');
insert into esb_parameter values('PROP_NAME_ERROR_RETRY_TCF_JNDI', 'OracleASjms/MyXATCF');
insert into esb_parameter values('PROP_NAME_MONITOR_TCF_JNDI', 'OracleASjms/MyTCF');
insert into esb_parameter values('PROP_NAME_MONITOR_TOPIC_JNDI', 'OracleASjms/ESBMonitorTopic');
insert into esb_parameter values('PROP_NAME_CONTROL_TCF_JNDI', 'OracleASjms/MyXATCF');
insert into esb_parameter values('PROP_NAME_CONTROL_TOPIC_JNDI', 'OracleASjms/ESBControlTopic');
commit;
select * from esb_parameter7.) Restart the SOA container and verify the opmn and J2EE container logs for any errors.
cheers
James

Cannot install Acrobat X Pro. AAM says "installed" - but no sign of the "Launch app" option.

The Adobe Application Manager states Acrobat X Pro is installed but there is no "Launch App" option.
I have succesfully installed Ai, Ps and Id, but Acrobat X Pro is giving me a headache!
The app installed with a warning and 2 errors. (I did not save the text about this event - and I cannot repeat the operation that led me there,)
I can recall some detail from the text:
• The installer could not remove data from an (old?) file from my Acrobat 9 installation.
• There was a reference to the installer "lacking permission(s)" for some operation.
• Also, some reference to my computer not supporting several "requirements".
I have since uninstalled my Acrobat 9 installation, but cannot uninstall Acrobat X Pro. (It is not listed under "Programs & Features".)
I also cannot re-install Acrobat X Pro - the AAM won't let me.
Any ideas? Can I download a trial-copy, then try to install that? Would it be recognized by the AAM?
joeb_mtl

Thank you, Baljeet - that worked well - However, the now installed Acrobat X Pro version 10,1.1.33 apparently needs a update/patch to upgrade Acrobat to vs. 10.1.3, and after much effort and many forum-suggested fixes, I cannot complete the update. (It "rolls-back" and reports an Error 1310. Error writing to file: C:\Config.Msi\2c4f05.rbf. Verify.......access to that directory.")
I have also received the same ("1310") error, but referencing a lack of sufficient "permission to modify....a certain file". (I can't now recall which file.)
To further complicate matters, my Secunia P.S. Inspector app also reported the need for an update - which did not complete either. It is now perpetually "Waiting for update to complete".
I hope you can solve this problem too! Thanks.
joeb_mtl
Message was edited by: joeb_mtl
I failed to tell you my OS is WIN 7 SP1 HomePremium, 64-bit, 3.0GHz Processor, 8GB RAM, 274 GB available hard-disk space, 1920 × 1080 Screen resolution, Pioneer DVD-Rom drive, IE 8, Dual GeForce 8800GTX video cards.

ISync will install but will not open.

Hi folks,
This is my first post and boy is it a doozy.
I am having a multitude of issues, of which, my own numbskulledry is the primary cause.
I am a Treo 680 user, and hence, I use Missing Sync.
All of my contacts are in Address Book within OS X and none of which are on my brand new 680 or in Palm Desktops address book.
My Macbook is also new. Now, before I bought the 680 I had a 650, and I had a rather old iBook. I have two phones, a smaller phone for my pocket when I am working, an older Moto . ON my new Macbook, I got all of my contacts off of the Moto via iSync. Now I have my new Macbook, and my new 680, I must admit, that until now, I never tried to use missing sync on the Macbook.
I have been unable to get Missing Sync and iSync to play nice at all on the Macbook.
Everytime I went to enable Palm Synching in iSync, iSync would tell me that something wasnt installed correctly. Someone suggested I trash Missing Sync and reinstall it and try again. Well that only made matters worse.
this is where things get stupid..
So I decided to Trash everything and start over. I trashed every file I could associate with iSync, Missing Sync and Palm Desktop.
So...long story short, when I went to the Apple site to DL iSync, to my surprise I find that the only version available for download, is 1.5. So, I DL'ed it and it installed, but it will not open. It just bounces in the Dock a few times, and then goes away, I've tried this both as a restricted user and logged in as the Admin; same result.
Any helpful thoughts or suggestions would be greatly appreciated.
Thanks very much for reading.

Welcome to Apple Discussions.
As a general rule, you should not attempt to manually remove synchronization components manually. At this point, you are well past that note of caution but, in the future, don't attempt to do so. As you have discovered, that approach does nothing more than aggravate the issues you face.
You must first do this: reinstall the Palm Desktop, using the package bundled on CD-ROM that you received with your smartphone. [It is important that you take these steps in the order I outline. Seriously.]
Next, you should download Pacifist and use that utility to extract and install the iSync 2 package on the original Mac OS X 10.4.x that was supplied with your machine. There is now other way to perform this properly, and you cannot download a copy of iSync 2.x, which is required for use with Mac OS X 10.4 or later. To extract and install iSync, follow these instructions:
If you need to reinstall iSync, you'll need to do it in a two-step process, initially using the Pacifist utility to extract it from your original Mac OS X 10.4.x Install or Upgrade DVD.
Download Pacifist from here.
To extract and install it, launch Pacifist. Insert your Mac OS X 10.4 Install or Upgrade DVD in your optical drive and wait for it to mount. Press the now-activated Open Mac OS X Install Packages button. Wait for the window to appear—it may take some time to load all of the resources—then double click on the Contents of Essentials.pkg file to open it, double-click on the Applications folder, select iSync.app then press the Install button.
That will install a copy of iSync 2 into your Applications folder. Then run the Mac OS X 10.4.9 Combo update for PowerPC or intel processor based machines—whichever is appropriate for your platform—to update it to release 2.4.
Those specific updaters are available at these links:
• for PowerPC: http://www.apple.com/support/downloads/macosx1049comboupdateppc.html
• for intel: http://www.apple.com/support/downloads/macosx1049comboupdateintel.html
Once you have done that, reconfigure iSync to support your smartphone by adding using the Enable Palm OS Syncing… option. You should also reset the synchronization framework by opening the Preferences… dialog and pressing the Reset Sync History… button. Quit iSync.
Launch the Address Book and use the built-in option under the File menu to back up your contact records. Do the same with iCal, using its built-in option to back up your event and task records.
At this point, if you intend to use iSync, initiate a synchronization event and choose Replace to overwrite the contents of your handheld, unless—by doing so—you would lose information on it that is not in iCal or the Address Book. If that is the case, you must instead choose Merge.
Once you have done that, examine all of the records in iCal and the Address Book and make any additions, deletions or modifications you wish to to your contact, event and task data. Back each set up once again.
Then reinstall the Missing Sync, and use the option to overwrite the contents, this one time, of your handheld with the individual Mark/Space Contact, Events and Tasks conduits. Once that has been completed, make any category or group changes to your records on the Palm, and synchronize as you would normally.
If you are stumped at any point or encounter something you do not understand, STOP and ask about it. And whatever you do, don't delete anything related to your synchronization framework except individual application preferences files, should that be necessary.

Pixma 870 prints but sheet is blank.

Pixma 870 passes cleaning test, and printer activates when "print" command is sent but paper is blank. No erroe msg.

Hello JBwvu64,
To have a better understanding of your issue, please let everyone know some basic facts regarding your PIXMA MX870 and computer setup. For example, what operating system do you have installed on your computer, and how does the PIXMA MX870 connect to your computer? Once we have more information, our Canon Forum members and our Subject Matter Experts will be able to assist you with suggestions appropriate for your specific issue.
Thanks!

I click on a link to open a new window nothing shows up - i.e. if I click on 'enlarge' on an Ebay auction photo a new windoiw opens but it's blank inside.

I'm running Firefox 3.6.13 and if I click on a link to open a new window nothing shows up - i.e. if I click on 'enlarge' on an Ebay auction photo a new window opens but it's blank inside.
Any ideas please? I've tried uninstalling and re-installing, and downloading and installing Flash but no joy.

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

HT1923 When trying to access i tunes store when in I Tunes i cannot connect to the internet - any thoughts? i have tried un-installing and re-installing but no joy

When trying to access i tunes store when in I Tunes i cannot connect to the internet - any thoughts? i have tried un-installing and re-installing but no joy

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

How do I Permanently remove a tab that is called "new tab" but is a Blank Page?

Every time I turn my computer on, I click my Firefox icon in taskbar at bottom, BUT, not only does my homepage tab show up, but lately I have been seeing another tab showing up beside it called "New Tab" but it is Blank. I don't how it all of a sudden showed up, but I can't seem to get rid of it. I right click & "close tab", but I have to do this every time I turn on my computer. Isn't there a way to Permanently Remove this Tab so it doesn't keep showing up on my Tab Bar?

Unfortunately that was empty too. The Firefox upgrade at that time seemed to wipe an awful lot of stuff. After searching, re-installing etc, whatever was suggested, I gave up. It was a while back. I will remember your suggestions if it ever (hopefully not) happens again though. I did have a very old bookmarks backup, but that would not import, so I did use bits of it manually but it had saved as a massive merged line of sites without my folders, so was a bit too much to fiddle with. The loss of the classical music sites was what I regretted most, no idea what they were called and cannot find some of them now. Ah well, no point in fretting about it now I suppose.

Did a clean install but still find imac slows significantly as the day goes on. first projects go pretty well. later

did a clean install but still find the imac slows as the hours pass. using photoshop cs5 and lightroom3,
working w/some large files, but previously-like months ago, there was not this slowing problem. even
the internet slows later in the day. and small moves in a program start to take forever. anyone experience this
issue? or have any thoughts on it? thank you

How much free space do you have on your drive?
From the sounds of your problem is sounds like you are approaching a full disk.
Allan

Googlebar Lite is installed but space is blank

Similar Messages

Maybe you are looking for