Gosh - I didn't know that! Print stylesheet anomaly
I have a page with a masthead as a background image. The
client wants it to
print, which of course it does not as a background image.
So, I put a second instance of the image right above the
</body> tag, made
it position:absolute, with top:0 and left: 0; and
display:none. In the
print stylesheet, I made it display:block. It works
beautifully, but on
pages that are long, it appears at the top of the LAST page,
not the first
page. What the heck?
To see this, go here -
http://www.vonculinassociates.com,
go to the services page, and do a print
preview.
(this is very much a site in progress)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
Yes, I know about printing background images.
Pay attention now! 8)
I have an image that is absolutely positioned at 0, 0, with
display:none in
the screen stylesheet and display:block in the print
stylesheet, so that
it's visualized when the page is printed. BUT, the 0, 0
positioning is not
appearing on the print preview where I would expect it to.
Rather than
being at the top of page 1, it's at the top of page 3 or
whatever is the
last full page to print.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Baxter" <baxter(remove:-)@gtlakes.com> wrote in
message
news:[email protected]...
> You can use divs with absolute positioning and filled
with an img, all
> with
> a z-index that puts it behind the content. The images
will print and look
> like a background. Background by themselves are under
user control and
> nothing you can do with CSS will change that. Sorry
>
> Dave
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>> Thanks, but it is a problem - I can't do that for
everyone viewing the
> page.
>> The question was not how can I make background
images print. It was how
> can
>> I make a page that will print an image to fill that
gap. I had no idea
> that
>> my approach would be so badly mangled by the
browsers. Is my approach so
>> goofy?
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Baxter" <baxter(remove:-)@gtlakes.com> wrote
in message
>> news:[email protected]...
>> > Murray,
>> > Its a browser setting issue. go to tools
advanced and check print
>> > background
>> > image and you have no problem.
>> > Dave
>> > "Murray *ACE*"
<[email protected]> wrote in message
>> > news:[email protected]...
>> >> I have a page with a masthead as a
background image. The client wants
> it
>> > to
>> >> print, which of course it does not as a
background image.
>> >>
>> >> So, I put a second instance of the image
right above the </body> tag,
>> >> made
>> >> it position:absolute, with top:0 and left:
0; and display:none. In
>> >> the
>> >> print stylesheet, I made it display:block.
It works beautifully, but
> on
>> >> pages that are long, it appears at the top
of the LAST page, not the
>> >> first
>> >> page. What the heck?
>> >>
>> >> To see this, go here -
>> >>
>> >>
http://www.vonculinassociates.com,
go to the services page, and do a
>> >> print
>> >> preview.
>> >>
>> >> (this is very much a site in progress)
>> >>
>> >> --
>> >> Murray --- ICQ 71997575
>> >> Adobe Community Expert
>> >> (If you *MUST* email me, don't LAUGH when
you do so!)
>> >> ==================
>> >>
http://www.dreamweavermx-templates.com
- Template Triage!
>> >>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>> >>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>> >>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> >> ==================
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
Similar Messages
-
Hi, my iPhone 5s was disabled because i forgot my passcode. I was relying to 3 finger prints that I was saving before. I didn't know that passcode is required when the phone restarted. So I follow every single steps to recover my iPhone using i tunes.
Suddenly an iTunes pop up a message "that I must respond to iTunes on my phone, so that the computer could have access to the phone".
HOW COULD I RESPOND ON MY PHONE WHEN I WAS DISABLED ALREADY?
IS THERE ANY BUTTON TO BE PRESS AS CODE COMBINATION THAT STANDS AS MY RESPOND TO ITUNES?
<Edited by Host>Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.
For the future, this is the iPod touch forum -
Revision: 13560
Revision: 13560
Author: [email protected]
Date: 2010-01-17 21:09:32 -0800 (Sun, 17 Jan 2010)
Log Message:
FlexPrintJob didn't know that in Flex 4, width no longer factors in the scaleX and height no longer factors in scaleY
QE Notes: none
Doc Notes: none
Bugs: SDK-25044
Reviewer: Evtim
Tests run: Checkintests
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-25044
Modified Paths:
flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/printing/FlexPrintJob.asI think this might be related to the latest gnupg upgrade. I don't use GNOME, but suddenly I keep getting pinentry instead of "plain-text"/readline password entries for my GPG keys, and it doesn't remember so I have to keep typing it in.
-
Dear Sir/Madam
I want to tell you that I am very disappointed because I just read that in photo stream my photos are stored only for (30) thirty days.I didn't know that and I didn't have the time to save them on a device.
I was robbed of mobile before (3) three days and I lost 2.000 photos!
Is there any possibility to retrieve them?
If it was possible that would be great as I would save them immediately to my computer instead of losing them again.
Thank you for understanding
Kind Regards
Giaourtsakis KleanthisIf you were trying to get this apple, you would do it here: https://getsupport.apple.com/
-
I didn't know that pressing the x by an app in your purchase list you deleted it. Can I get it back?
Hidden Apps -
http://support.apple.com/kb/HT4928 -
i was stollen and i used the "Remote Wipe" but i didn't know that it won't be able to locate it anymore. It still hasn't wiped it, as it has not been online yet. Is there any possible way to undo this?
First of all i had already blocked it by icloud programm and then after that i received an email of confirmation that it was already blocked. Then i entered in the iCloud programm and saw that the thief it was disconected to not be localized. Do you know that even i had used the Remote Wipe it will work? Because the thief had before the blocked of the phone disconect to not be localized.
-
I didn't know that my credit card information is registered. Can I get refund?
I didn't want to purchase some applications but it was purchased automatically. I want to get refund;( How can I get refund? Could you help please?
http://www.apple.com/support/itunes/contact/
click that and then next to the green shopping bag, click the blue link and follow the steps. Send the iTunes store support an email, they will see what's possible.
Message was edited by: jesterwylde -
I deleted my music files and then emptied my trash bin and later realized that I can't play the songs in iTunes anymore if the files are delted. Is there anyway I can recover all the files?
1) If you bought them from Apple you canprobably download them again.
2) If you back up your computer as you should, they will be on the backup.
3) If you stop using your computer this instant (because as you use the computer it overwrites deleted files even if you have lots of space), buy recovery software ($100+), there is a chance you can recover some of them, though they may have lost filenames and will be in quite a mess. -
I didn't know that my ipod warranty had expired
I had planned on buying the AppleCare protection plan last month due to the fact that I had believed that I still had time before my warranty expired but as I was planning on doing so my mom told me to wait until I had enough money instead of borrowing from her :/ She had also told me that when my warranty was due to expire, Apple would send me an email stating that I needed to purchase a new one....too bad that email never came and now I'm completely screwed. I tried calling and everything but I keep getting the same answer about my iPod being out of warranty. And now my backlight no longer works. What can I do besides spend a **** of a lot of money that I don't have?
Sorry, but as you've apparently been told already, if the original warranty has expired on your iPod touch, there's nothing you can do. You cannot purchase and register AppleCare once the warranty on the iPod has expired. If your iPod has suffered a hardware failure, you will have to pay to get it serviced, either through Apple or through a third-party service center.
Regards. -
.....a previously activated iPhone cannot be reset and reactivated with a new phone number? I bought a used iPhone from a private party and according to this article (http://iphone.byethost9.com/iphone-news/no-iphone-on-ebay-3.html) the phone that's currently sitting on my desk is a brick. I'm sure many people are buying/bought brand new sealed iPhone on eBay, but I'm sure there are also people like me who bought used ones. Considering that, I'm amazed at the fact that I can't find an answer to my question anywhere on the net. Should I just call AT&T on Monday?
You don't have to wait until Monday - just walk into your local ATT store...if you call ATT, they are going to either send you to your local store anyway, otherwise they have to mail it to you and that will take another week.
All ATT stores in my neighborhood are open on Sundays.
The short answer though, is, NO, YOU CANNOT REACTIVATE AN OLD SIM....YES YOU CAN GET A NEW ONE FREE.
ATT uses SIM cards -- the phones themselves have no value without the SIM. The SIM can be added, removed, swapped (except in an iPhone), etc. But it can not be used twice for different numbers. -
I was charged for supposed to be "free games" atleast $10.97 and i didn't know that i will be charged and if i knew i would not downloaded this games. So therefore i would like to request for a refund. Thanks!
You will need to contact apple. You can scroll to the bottom of the page and hit contact us.
-
Hello
Recently, I asked about the possibility to swap from windows to mac with Adobe Design Standard CS5.5. In response, I was directed to the help page and i know that it is possible. But today I see that the help page is out of date.
How cann I now swap platforms for Adobe Design Standard CS5.5? Do I realy need to buy CS6? Or afer dowloading the mac version of CS5.5 I get the key. And if I realy need upgreade the CS5.5 cann I use the Mac version of CS6 for the dowloaded mac version of CS5.5? Is it possible?Thanks !
I didn't know that I cann buy CS6 Mac upgrade in Adobe Store.
So I have only to buy the CS6 Mac versions and upgrade CS5.5 Win to CS6 Mac?
How does look the procedure?
Do I need to install first the CS5.5 Mac on my Macbook and then upgrade it or is it not necessary?
Thanks
Langosz -
How do I select two-sided printing now that I have Adobe Reader? I didn't know it would change my print function at all and am curious why it does. My HP printer always did this and on the old screen there was a check off box for two-sided printing. Thank you!
Hello Mickeyps
What's the Adobe Reader version at your end? I am using Reader 11.0.06 and I do see this option. See below.
Regards,
Deepak -
I don't have a wireless printer, and want to print things off of my iPad. I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.
I don't think you can connect a printer since you won't have the printer drivers. I use FingerPrint from collobos.com to print to my non-AirPrint printers.
-
In finder, it says that I am shared to a pc which I didn't know about nor do i know the pc, how do I stop sharing with it?
I gather that you are seeing other "pee-seas" (and | other hosts) in MAC OSX Finder UI under SHARED ? T/F ?? The Finder is reflecting what others are sharing.
In any case consider these items:
1) Other hosts on your network (local) have ITEMS (folders and structures) that they themselves are sharing
with anyone on there network and to others outside who will access them via a specic host nae or address. KInda like your mate who has some files he wants to share with you. You connect to his host (machine) either by a host name (yourmate.com), an IP address (33.33.33.11) or on your local area network usually over Bonjour (yourmates_macbookair.local).
Simply THEY ARE sharing their stuff with you and this your MACs FINDER makes then apear under the SHARED parion of the side bar in the UI. This is likely what you are seeing
microsoft platforms have their users share DIRECTORIES mainly through the SHARING properties for that opject. YEp.. and then you can at a minimum SEE it . HOwever this doesnt mean you can access the contents.... This is all familiar to most.. nothing to be concerned about.
Probably no need for concern.....
(IMO), its amazing the number of PC users that unknowingly expose their folder contents on a hotel WIFI or ETHERNET network... its astonishing....!
2) YOUR CONCERN that you are sharing your stuff:
I'll hazard a guess that form you minmal description that you may feel that others on your network can SEE YOUR STUFF?? Bt Default, any user can see ANYTHING you have put in your ~/Public folder (theis is your Public folder in your home directory. Usually they can ONLY read whats there unless you have gone out of your way to change the ACCESS CONTROL LIST (ACL) to an access for others other than READ ONLY.
An extention so to speak of this sharing is the concept of a "DROP BOX" that is also maintained by default in your homes public folder (~/Public/Drop Box). This is very useful for people to GIVE you their files by DROPPING then into this ~/Public/Drop Box folder.
So THIS folder is exposed for all to see on your local network.
How to stop anyone seeing anything?.. easy..
Step 1: go to SYSTEM PREFERENCES/Sharing/ and UNTICK the "File Sharing" service. Its probably already unticked. This will stop exposing anything that you have shared to others. pee-sea users may need your to enable SMB/CIFS TO READ YOUR STUFF. YOU WONT HAVE THIS ENABLED UNLESS YOU DID IT YOURSELF. Additionally there are windows .apps to read mac file systems too... so stopping all fie sharing will do the trick
Step 1.1: if you dont want others to see your ~/Public folder either then simply select the Public folder in your finder, open the Finder inspector (+i), open the disclosure triangle for "sharing and permissions" and then set the access by others to "NO ACCESS"
Step 2: while you are in SYSTEM PREFERENCES/Sharing/ and UNTICK the "Remote Login" and "Screen Sharing" services. Its very likely already unticked. This will stop exposing remote services such as ssh and vnc anything that you have shared to others.
Step 3: for extra go to SYSTEM PREFERENCES/Security/Firewall and enable any setting for network here that you want to disable or filter... seek out these apple discussion forums.. tonnes of stuff here on his.
Others reading this thread will also have good advice and opinions.
Post your results for others to see.
Warwick
Hong Kong
Maybe you are looking for
-
Change Moving Average Price when Post Goods issue posted from VL02N
Hi all, Please help me to find USER EXIT / BADI or Enhancement to change Price - MSEG-DMBTR when Post Goods Issue posted from transaction VL02N. Thanks in advance, Mila.
-
I record in stereo with a 10KHz tone down the left channel to defeat AGC on my camera and mic feed into the right channel. When I edit, I want to mute/delete the left channel and pan the right into the centre, to leave me with mono audio across both
-
How can i add or get a value in different rows like a condition
Hi all, this is the example of some records in my flat file of a survey, Cliente- question - Answer 1 - 1 -5 1 - 2 -5 1 - 3- 5 2 - 1- 5 2 - 2- 4 2 - 3 -5 i need count the clients who has answered in the three questions the answer 5, for example the c
-
Remove symbol or stop points?
Hello! I am currently doing game design at university and Have recently started looking at action script 3. I am not struggling too much and can usually find the answer to what I am looking for but this really has me stumped. I want to add an item to
-
Embedded or in-line web page in mail! Almost there but not quite.
I have successfuly made a small web page in GoLive ( one small images, an animation GIF and a short block of text to act as an extended signature) then rendered/ viewed the page in Safari and everything looks OK at this stage. Then from file menu gon