Got 2 iPads. One used by my wife and the other by me. How to keep contents like photos and contacts separate? Don't want to mix infos between the 2 devices. Is it possible to make sure that they don't sync together?
I stripped the old iPad (the one I gave my wife), so now she only has the contacts and photos "suitable" for her. When Iwoke up this morning my iphone and my new iPad had only the photos and contacts that I left her on her old iPad!! That really *****! I've lost all of my contacts and quite a few photos. Is there a way to restore the old settings here?
Are sharing an account with your wife?
Similar Messages
-
Is it possible to have a window open for my Itunes Library and Itunes store at the same time so that I can toggle back and forth between the two. I want to check my library before I buy songs to make sure that I don't duplicate.
Thanks!No.
-
I changed the battery in my wireless keyboard and checked the batteries to make sure that they are good, I left the computer on while I changed the batteries. When I returned to the computer, the computer does not acknowledge the keyboard so I can't do any diagnostics. What do I do?
Hold the power key on the keyboard down for 5 secs to power off, tap the power button once to start. It should connect automatically.
-
How can I make sure that I don't get roaming charges when traveling with my iPhone?
Hello everyone!
I am going to be traveling to China next week (from Canada) and I want to bring my iPhone to listen to music, read books and use for Wifi as well. However I don't want to use it for calls, browsing etc as I don't want to get charged roaming fees for these services.
Is there a way that I can make sure that this does not happen? I think that if I leave my phone on Airplane mode the whole time then I'll be fine and I can find Wifi wherever I am, but I just want to see if is this in fact correct or if there is anything else I can do instead.
As well, if I do end up taking my phone and taking out the cellular service when I'm in China, will I still be able to use iMessage to text people back home if I really have to?
Thanks!Put the phone in Airplane mode...this turns off all iPhone radios...but, you can go back into settings & turn WiFi back on. You can then use iMessage.
No nasty surprises if you do that. -
I bought a book and at fierst the download was not responding.it tookna while to respond and when it did there was 6 books downloading but they were the same book and i want to make sure they don't charge me for all 6 books . What can i do ?
This forum is for making podcasts: the best place to ask would be in the iTunes Store forum:
https://discussions.apple.com/community/itunes/itunes_store
or you could contact iTunes Support; http://www.apple.com/support/itunes/ -
How is it possible to make sure that LV uses the same thread for several threadsafe DLL calls?
Hello,
i have a thread safe DLL and most functions are called from serveral threads from the LV apllication without problems.
In case of an error i have to call an error handler function in this DLL (like WinAPI: GetLastError()) from the same thread which has called the function that failed before.
I can't use the user interface execution because some functions need a long execution time and i don't want to balk the user interface.
All other executions than the user interface execution have more than one thread and in most cases the DLL function calls were executed from different threads - so the error handling doesn't work...
Any idea?
Thanks for your help!Hmmm....
How about wrapping all of your dll calls in a single VI (or an Action Engine ) and make sure the VI's thread is NOT set for "Same as caller".
"Threadconfig.vi" (sp?) will also let you dictate the number of threads associated with an execution system. Set your target thread for "1".
Not sure on the above.
Please correct me if this is wrong!
Ben
Message Edited by Ben on 07-19-2007 08:26 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
I have a new iPad air, and i want to take the information and content from my old IPad 4 retinal and use it on the new one. I then want to clear this old iPad and give it to my children to use clear. I don't know how to get the downloaded information like pictures and videos from the existing cloud into my new Ipad. i wanted to confirm that these items will still be accessable before i totally reset my old ipad.
thanks,Go to Settings>iCloud>Storage & Backup on your old iPad and check the bottom of the screen under Back Up Now to confirm that you last iCloud backup was completed successfully. If it was, it will list the time/date of the backup. Assuming it was, to transfer the photos and other data to your new iPad, restore the backup of your old iPad to your new one. When you set up the new iPad, you will be given the option to Restore from iCloud Backup. Select this option and follow the prompts, choosing the backup of your old iPad to restore to the new one. Then be sure your iPad is connected to wifi and your charger while it is restoring the backup.
If you have already set up your new iPad, go to Settings>General>Reset and tap Erase All Content and Settings. This will allow you to set it up again, where you will get the option to restore your iCloud backup.
As you mentioned, be sure not to erase the old iPad before confirming that the information was successfully transferred to your new one. -
iMac 7.1 (2.47 Ghz Intel Core Duo w/2GB memory) operating OSX v 10.9.5. At the core level I find two Library folders, one within the System Folder and one by itself with the other core level folders - mostly same content. Is this right or do I have a duplication problem?
The system is slow. -
I've just send to repair my retina display and I'm no very sure that they replace it for a LED one . How I could know which kind of display I got now??
If you head over to ifixit.com, you can check out their replacement guides for each of the items you feel needs replacing. The cost for the parts is listed there. It would be that cost + labor at an Apple store. I'm not sure if they would replace things that are cracked as that is cosmetic damage and doesn't affect how well (or poorly) the computer works. You would have to bring it to a store and ask.
~Lyssa -
when extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?
Have you even tried the process in which i have described in my previous post?
Yes, many times. If you are setup to "extend a wireless network, the screen looks like this:
If you click the Wireless Options button, the screen looks like this:
Where is it on this screen that you see a setting to adjust the channel? It sounds like you are confusing "create a wireless network"....which does allow you to adjust channels.....with "exend a wireless network" which does not.
Normally, when you extend a wireless network, AirPort Utility used to always assign the same channel to the extending device. That is no longer the case. It might be the same, or it might be different. You have no control over this, so you have to accept what AirPort Utility thinks is best. -
Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
RogerHi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger
[email protected] -
I used a purchased program iannotate to download, highlight and store many documents. My ipad is brocken and I m ahtinking of getting it replaced by Apple for a payment of 240 or so. Is there a way to make sure that I do not lose pdf documents in iA?
I am sorry that you don't find the answer to be correct. In THIS forum, telling you that you are in the wrong forum, and suggesting where to post for correct answers, or indeed any support, IS the answer.
I'm also sorry that you purchased a phone that you are having trouble with. If the vendor cannot help you (HTC), and the eBay seller cannot help you, then you really do need to either follow up with the forums Ken suggests, or the HTC forum, or with eBay.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog:http://unlockpowershell.wordpress.com
My Book:Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Stated above, I have issues with Facebook and my iPad 2. I have updated the operating system, but the problem started before that. Can't click on like or enter comments. Problem started about a week ago. Sent email to Facebook and they responded that they don't answer individual emails but read them. Lots help that was.
Facebook is basically broken, at least as far as it pertains to mobile browsers. THey changed something in their coding and now mobile browsers don't work with facebook. ANd their app, well their app has been less than stellar for a long time.
Unfortunately, it's up to facebook to fix things, not apple. All you can do is find work arounds. Look for third party apps, I have one called Facely HD which seems to work reasonably well (even though it does seem to not see all posts). There may be others that work better. You can also simply not access facebook on your mobile until they fix it.
It's all on them and users can only be patient or find other ways to work around it. -
My iPad Air have a screen problem so I sent it to iService (I'm Thai)
but they told me that they don't know how long that I have to wait until I will get a new one?
Because they said there's no stock in Singapore
Can anyone help me?
Just bought on 15/11/2013You can call iService and ask to speak with a manager.
-
My computer sees the auto duplexer on my Epson Stylus PX720WD but iworks says it is not installed. I have contacted Epson and I have the impression that they don't know how to solve this problem. Anyone got any ideas?
If you print to PDF first, and then print it from Preview does it work?
Maybe you are looking for
-
Design advice for vertical list calculations
I'm extending a product management life cycle sharpoint 365 site, With purchase orders, magazine store, production targets (date based) and sold dates. So that in our production environment we can see how much is stored, how much can be sold, and wha
-
What is the difference between String Constant and Empty String Constant
What is the difference between string constant which does not contain any value and the Empty string constant? While testing a VI which contain a normal string constant in VI analyzer, it gives error to change string constant with the empty string co
-
HP All-in-One Printer Remote App For Windows Phone 8.1 Troublesho​ot
Dear HP, Device Nokia Lumia 520 OS Windows Phone 8.1 Printer HP Officejet Pro 8600 All in One Printer I have installed HP All-in-One Printer Remote on my smartphone as well as on my PC having Micro
-
How to create a formula based on group level
Hi, If there are three group level ins a report: How can I creat a formula to put on page header depended on current group level? Thanks!
-
T.code KKRS - target data missing in reports - t.code KKSB
Hi Gurus, when i am extracting the product hierarchy reports using the t.code KKRS. I am unable to see target data in year 2012 report only. But for year 2011, i am able to see both the target data and actual data. In 2012 i am able to see only actua