Got 800ccc0f-0-0-332 error when sync inbox with IMAP

Dear all,
I have outlook configured with IMAP, I got 800ccc0f-0-0-332 error when it sync the inbox.
Besides, message cannot receive to inbox.
Anyone has idea?
Hey, I am back

Hi Xiu,
According to your description, I know that you configured an Exchange account with IMAP on Outlook and got error during syncing Inbox.
I notice that the Outlook cannot receive to Inbox, how about sending emails?
Please try to check whether the incoming server configured correctly.
Please expand "Folder" in Outlook and check whether there are related Synchronization Logs in the "Sync Issues" folder. Detailed information without sensitive information would be helpful for the further troubleshooting.
Please try to manually send/receive on Outlook, or try to re-create profile.
Similar thread for your reference:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/problems-with-outlook-2013-and-imap/e7aa0cb6-2182-47eb-84e4-2a9c6f86d892
Thank
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Similar Messages

Runtime error when syncing P1i with PC

I get a runtime error when syncing my P1i to PC. The error is linked with this file, 'dxp syncml.exe', and the application is said to request the 'Runtime to terminate it in an unusual way'. How do you fix this?

Thanks Joanne. Let me give you feedback on whats happening so far.
After some doing, I discovered that my firewall is controlled by Norton Firewall Provider. (Bear in mind I am a novice in terms of managing these computer protocols). To modify the firewall settings, Norton calls this in their the control panel 'Smart firewall', I go to program control then configure. A list of programs came up with the options to add, modify, remove or rename. I searched the list and found that DXP SyncML.exe and mRouterRuntime.exe were listed and set to 'Auto' in the Access column. I noticed that under access, the options include auto, allow, block and custom. I reasoned that 'allow' is the highest level of access, and to support the sync feature, I changed the status to 'allow' from 'auto' for the DXP SyncML and mRouterRuntime executable files. If you believe it is ok and safer to keep the auto status, advise me.
I did not find in the listing any of these programs; Bearer Abstraction Layer (SCBAL.exe), Generic Device Management Executable (Generic.exe) or Symbian Connect Object Model for Symbian Connect QI (SymbianConnectRuntime.exe).I did a search and located the generic.exe and the other two files under 'common files' in 'teleca shared' folder, and 'symbian' in 'shared' and 'symbianconnectruntime', respectively.
Norton's control panel for Smart Firewall gave me three options when adding programs: allow, block and manual configure internet settings. The last of the three was recommended by Norton. However, I selected 'allow' for the generic.exe, symbianconnectruntim.exe and scba.exe.Please advise if you believe I need to modify the terms I entered to set up this procedure (is there a better setting that allow me to achieve the same level of functionality without compromising my security?)
Now Joanne, whats left is for me to try the sync after making these changes. I feel as if I accomplished a lot by only reaching this far. I will have to do a reinstallation of the SE PC Suite before moving on though. Let me explain.
When the sync failed repatedly because of the unexpected termination linked with the dxp syncml.exe, I uninstalled the SE PC Suite which was done from a disc, and installed a version from the Sony website. That version is 1.6.0, with a copyright date of 2006. With this, the sync worked. By the way I am using Windows 7 Starter. Now what I am going to do later is uninstall this version of the suite, and reinstall the one from the disc that was linked with the problem we are solving. When I do that later, I will give you feedback.
Just in case you are wondering, I have a vested interest in using the PC Suite from the disc. This application works fine for the file manager component where the drive on the phone and removable media card are read. In the 1.6.0 version, I cannot get the file manager to see the phone as connected though when I put the card (is that called M2 disc?) in the phone, it reads. So, I although sync is working with the 1.6.0 version from the website, I want to use the version I have on disc if the sync component gets over the problem we are trying to solve.
Hope I am on the right track so far I thank you profusely for your patience and dealing with my qeurry; the solution will make a world of a difference for me and many other P1i owners. Look foward to the follow up
Rohan Bell

Error when syncing blackberry with Outlook calendar

I had sync all set up and working fine. I would occassionally get an error, but could solve it by resetting the configuration, then reconfiguring it. Now I get an error every time, even immediately after resetting/reconfiguring. The log shows that the process is failing when it is reading a record from my Outlook calendar. Even after I delete the offending record, and several before and after it, the sync process fails again! Is there some reliable way to debug and fix this problem?
Thanks,
Ali

Jeff33,
You may find some of the steps in this troubleshooting article will help you out:
http://docs.info.apple.com/article.html?artnum=305845
Hope this helps,
Jennifer B.

Error when syncing music with iphone 3g and itunes

Does anyone know how to fix the "unknown error -69" when trying to sync iphone 3g and itunes. I have plenty of memory but certain songs will error and then all others after that one errors. So annoying can any one help?

A couple of things that might help out.
Open computer management by clicking on start and right clicking on my computer, then choose manage.
When the computer management window opens, expand services and applications on the left.
Click on services and see if Apple Mobile Device is running on the right.
If it is not running, or is not set to automatic, try starting it.
Also if apple mobile devise is not installed or will not start, this article might help out uninstalling and reinstalling itunes.
http://support.apple.com/kb/HT1926?viewlocale=en_US
If the apple mobile device is installed and will just not start, try uninstalling your security software.
Once uninstalled, restart your computer.
Once the computer is restarted, open computer management to see if apple mobile device will start.
Hope this helps.

Error When Syncing BB9900 with Desktop Manager on Windows 8 & Outlook

I have a BB9900 running 7.1 Bundle 2061 (v7.1.0.714, Platform 5.1.0.532)
I have a Windows 8 PC running Outlook 2010
I have downloaded Desktop Software v7.1.0 B42
I have .NET Framework 3.5 installed and enabled ( and it was prior to the installation of the BlackBerry Desktop Software)
Have set up Sync of calendar from PC to Phone for all calendar options
I have received the following error message :
"Caught_com_error_exception. Description (): Error(): -2147023151 (0x800706D1) : ErrorMessage(): The procedure name is out of range.ource(): (null)"
I have uninstalled & re-installed software a number of times, with multiple re-boots.
Any help on resolving the issue greatly received
Thanks
Jacqui

Hey Jacqui_666,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps in this workaround and then attempt the synchronization:
Open a command prompt window by using Run As Administrator.
Type in cd \ and press Enter.
Type cd Program Files (x86)\Common Files\XCPCSync.OEM\SyncSDK.209.601\Translators\MSOl and press Enter.
Type regsvr32 XCPCRdmptn64.dll and press Enter.
Attempt to sync again using BlackBerry Desktop Software.
Let me know if the issue persists.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Error when syncing iPhone with Outlook 2007 since updating iPhone to 1.1.2

Since updating to 1.1.2 I receive this message "OutlookSyncClient has stopped working". I am running Vista Business with Outlook 2007. Prior to updating to 1.1.2 I had no issues. I have tested this running iTunes 7.4.3.1 and 7.5.0.20. My contacts sync with no issues, only my calendar does not work. Has anyone else ran into this issue and have you found a resolution/work around?
Thanks,

Jeff33,
You may find some of the steps in this troubleshooting article will help you out:
http://docs.info.apple.com/article.html?artnum=305845
Hope this helps,
Jennifer B.

Wierd errors when sync'ing with Outlook

Have a BB8310, sync'ing to Outlook 2003 using Desktop Manager 4.2.2.10. The field mapping characters within the Outlook mapping are extended alpahbet characters, ie; ¦æ¨Æ¾ä or, ???????? or, ¦W¦r. Has anybody seen this before?

Same problem.
BB7100I
Outlook 2003 sp3
Desk Mang 4.1
Win XP Pro sp3
Used to have a Palm all software (Palm) is gone.
Either the compnay doesn't both reading these boards, the community is dead, or the company has decided the problem is so rare they will not fix / look in to it. Sad either way.
Souldealer
Message Edited by Souldealer on 09-21-2008 10:48 AM

Error when syncing wondering if anyone could help

alright well my problem I have been having lately is that i cant get all my songs on my ipod anymore i currently have a 5gen ipod vid 30gig and whenever i try to sync i get this message
"Attempting to copy to the disk "MY IPO" failed. An unknown error occured (-69)."
i have tried the restore function on itunes but that dont fix it, but recently my computer had a virus and i had to wipe and reinstall my OS and at the same time i got this virus my ipod was plugged in and syncing.
just wondering if anyone could help me out and ty in advance incase i forget to thank anyone later.

It's probably best to check on the possibilities from the following document first:
iTunes displays a -69 error when syncing iPod

TS3833 I am receiving this error when syncing my ipod: iTunes could not copy "song name" to the iPod "name" because an unknown error occurred (-50). I am using iTunes version 10.6.3.25. Why?

I am receiving this error when syncing my ipod: iTunes could not copy "song name" to the iPod "name" because an unknown error occurred (-50). I am using iTunes version 10.6.3.25. Why?

Right click the filename that won't download and selsct 'Get Info'. Look at the file path, does it have a //?// in it? That is a problem with Amazon downloads that prevent iTunes from finding the file. Use 'Add Folder' to add the album to your library and try syncing it again

Error when syncing photos...

Error when syncing photos. When I synchronize my IPad 1 (IOS 4.5.3) with Macbook (OS X 10.5.8) as I always do, an error saying that some pictures could not be synchronized because de IPad can not open those pictures!. Always copied from one device to another without problems! I use the latest version of ITunes. Thanks

Try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

Back up Error when syncing my iPhone 3GS

I get an error when syncing my iPhone to my PC that says iTunes cannot backup your iPhone. Any idea how to correct this without resetting my iPhone?

Check iTunes / Preferences - Devices. Delete any backups you see stored there.
Quit iTunes, restart your computer.
Try syncing your iPhone.
iOS: Syncing with iTunes

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

ORA-04062 error when running forms with different users

ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;

Lost my apps when sync iPad with iTunes

when sync iPad with iTunes, apps purchased in iPad by another account were lost, and the apps can't be seen when check for available downloads. How to get back the purchased apps? thanks.

If you lost all your apps on both the iPad and the computer, you can download the apps again at no cost. You can search your emails for app store purchases if you can't remember all the apps that you have downloaded.

Got 800ccc0f-0-0-332 error when sync inbox with IMAP

Similar Messages

Maybe you are looking for