Got a fan with a three pin conecter instead of a four pin conecter

So I bought a fan for my HP Pavilion g6 and you know the little plug on the end of the fan wire, well it had a three pin instead of the four pin plug that the original fan had. And I made sure it was the right computer when we orderd the fan. I was wondering if theres a way to maby snip the wires and splice it into the old plug and then just join one of the wires together or somthing, becuase at the moment its running at full blast becuase it dosent have the controll wire to tell it what speed to run at. Please help!
This question was solved.
View Solution.

Hi,
The part store says you need part # 641024-001:
     http://partsurfer.hp.com/Search.aspx?SearchText=A6Z72UA
which is for the following machines:
    http://partsurfer.hp.com/Search.aspx?SearchText=641024-001
You can see it has 4 cables: red, white, blue and dark yellow as shown:
   http://www.ebay.com.au/itm/NEW-HP-641024-001-Laptop-fan-for-HP-Pavilion-G6-1D26DX-G6-1000-/181173886...
Which part did you order ? Definitely it's not the right one.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Overclocking my PT880 got best results with a PCI video card instead of a AGP card. Why?

Hi guys,
I posted a complete review of my PT880 OC experience at the "Overclocking section of the forum: thread post PT880 OC results" : https://forum-en.msi.com/index.php?threadid=48006&sid=&threadview=0&hilight=&hilightuser=0&page=2
Some days of test with my new PT880 board and I was able to run my P4 (B?) 2.4Ghz at 18 x 154 = 2772 Mhz. I got this speed using a cheap PCI card XFX GeForce 4 MX440, from my old P3 computer. I also got system to work with higher FSBs, but with some unstable sound board issues that I related on the link above.
This week I decided to change the card to another same cheap XFX GeForce 4 MX440, but now a AGP 8x version. My surprise is that the system started to hang with just 20~30 seconds of use. Setting the front side bus to 133 helped to fix the stability issue. Playing a bit more I could OC using a 144 FSB, getting a final speed of 2592. Trying higher FSBs results in a unstable system again.
This makes me wondering if the AGP/PCI is really locked. Using 144 FSB, it is supposed that an unlocked AGP port will be running at 72 Mhz, what is the limit for some AGP cards... My BIOS setup is using the AGP clock option at the default of 66Mhz. Is it really working at this speed?
If the AGP/PCI bus speed is really locked in this VIA PT880 MSI motherboard, why this difference in OC results when I change from a PCI to an AGP card (same manufacturer, same nvidia chipset) ? Will be the northbridge more occupied now?
My PC setup now:
- MSI PT880 LSR with Bios upgraded to 1.4
- Pentium 4(B? 533Mhz) 2.4Ghz
- 512Mb DDR PC3200 NonECC ADATA Memory (just one module, so just single channel)
- XFX GeForce4 MX440 AGP8x
- Seagate 120Gb 7200RPM ATA100
- Seagate 80Gb 7200RPM ATA100
- Prolink PlayTV HD (conexant cx88)
- Sound Blaster Live! 4.1
- LG DVD-RW 4040b
- 450W generic PSU
That's all for now

Your AGP bus uses more bandwith than the PCI bus, thus making the OC more dependend from the AGP bus. And if your AGP slot will drain more CPU power and fragile as AGP can be, it will not tolerate errors due higher clock speeds. Mhz += Stability -. Notice: PCI is 33 Mhz/ AGP is 66/133 Mhz... . As you see there is less margin for errors. While you overclock the CPU will make tolerable errors: NP with PCI... But AGP... will take it to the MAX. [I hope this reply is No nonsense]

Can I control 3-pin fan with MSI Z97 gaming 5?

Hello, I want to know if I can control 3-pin fan plug into 4-pin header with MSI z97 gaming 5 mobo
Thanks
PS: Sorry my poor english

I own an MSI Z87-GD65, im assuming your Z97gaming5 is similar, mine can control 4pin PWM fans on the CPU_FAN1 and CPU_FAN2 headers, and can control 3pin fans on SYS_FAN 1,2,3, all of this on bios fan control (i dont like nor use the Control center). The limitations of my bios is that on 4pin fans on CPU_FAN1 i can go to 12.5% pwm (as long as the fan can reach this low), while on the 3pin con SYS_FAN i can only drop them down to 50% (thats if you fan can start at that voltage, had one that needed 60%), the fan can be ran at a steady % = rpms or can be dynamically ramp up with the CPU temp, thats also selected on the bios.
Here is a run that i did last weekend on a Silverstone AP182 connected on SYS_FAN3 on pure bios, you can see there the different % and rpms, and in the bottom you can see prime95 run where it did ramp the fans with the cpu temp.

Macbook boot with logic board pins

So I have been given a macbook that has had liquid damage, a Macbook Unibody model number A1278 specificially. I took the entire computer apart and cleaned and dried all the parts, when i put it back together it still wouldn't power on. However, I have been playing around with shorting the pins on the logic board and got the fan to start spinning which I assume means that the logic board isn't fried. I was wondering if anyone new what exact pins you need to short for it to boot up?
Cheers, Toby.

The question has come up before in the forum. Most people in this forum consider a water-damaged system to be a lost cause, unless Apple has replaced parts. Even if systems can be made to work, water damage tends to resurface a few months later as unrecoverable shutdown.
ifixit.com has picture-guides for certain repairs, and maybe even the specifications you need. Or Google for those who have put far more effort into those specs.

"system overload" in logic pro 8 on my Mac Pro with only three tracks

I am running Logic Pro 8, on a 2.66 Quad Core Mac Pro w/ only 1GB of RAM. I have not had the money for the much needed ram upgrade, yet.
The day before yesterday I opened a project I had opened many times, with only three tracks - two audio and a midi synth with only a few notes. These tracks are fairly well plugin-ed up, but this Mac Pro has always eaten them up, no problems. When I tried to play the project, I got system overloads every 2 seconds, rather precisely actually. My CPU usage reads low in logic and with iStat, but suddenly it peaks to 100% on my third core and I get the system overload.
I had my buffer size at 128, so I switched it to 1024, it worked, and then I switched it back again and everything worked like it used to!
But now I have to go through this slightly illogical little procedure everytime I open a project. I have read threads here about this subject before, back I cant seem to apply them / understand them in relation to my particular situation.
any ideas?

Join the club...wait for them to patch/update it.
I've tried the various work arounds, sometimes they work temporarily, sometimes not at all.
For the overloads the most reliable "work around" is to select each track, open the VI/FX modules associated with that track, then close them, go to the next track and repeat the process. OR, if you know all the modules (VI/FX) you're using, just open each one. This will "initialize" their existance BEFORE the audio engine hits them in playback.
My guess is LP8 tries to reduce it's memory foot print and does NOT initialize all the VI/FX in a saved project that is just opened until it actually needs to use them -- a good idea one would think. However, when you do your playback and it hits the VI/FX for the first time (after you just opened your saved project) it appears the audio engine stalls waiting for the VI/FX to initialize the 1st time around and hence the overloads error. Obviously I can't prove this since I don't have access to the code, but I'm a developer and this would be my logical guess based on the evidence at hand.
I can reproduce the problem consistently:
1. Start LP8
2. Open existing project with 3 tracks (staggered to start a different times) with different VI on each track
3. Have 3 buses with a different FX on each bus
4. Do nothing other than hit Play
Overload when it hits start of 1st track VI, stop, restart, overloads when it hits start point of 2nd track VI, stop restart, overloads when it hits start point of 3rd track.
Why wasn't something this obvious caught in testing? Good question.
Rob.
Message was edited by: Rob A.

I have an HP Laserjet 5m monochrome printer that I have used for years with our three Mac computers

HP Laserjet 5m monochrome printer C3917A (1997)
Operating system: OSX 10.7.4
Error message: Printer busy
No known changes made to system or configuration
I have an HP Laserjet 5m monochrome printer that I have used for years with our three Mac computers (two on OS X Lion and one on Leopard). I'm using ethernet to connect to a router and then my computer (although I have also tried to connect directly to no avail.) We went away for 2 weeks, returned and got “Printer busy” for all 3 computers. I reset the printer to factory settings. Same problem. By the way, the printer says READY. I then went to System prefs and clicked ‘–‘ in the Print & Scan section to remove the printer. When I tried to add back the printer, nothing shows up. I now remember that this may be because the means of communicating with the printer has now changed and that I had found the printer by somehow adding its address settings (or something). Can anyone help me to reconnect with the printer?
This question was solved.
View Solution.

Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

Since other millions of people updated and do not have that problem - it means one of two.
1.Your friends lied to you and do not have that problem and in that case only your installation of ios7 got corrupted and you need to restore your phone.
2.Your friends didn't lie to you and all 4 of you need to restore phones (that way reinstalling ios 7 properly)
here are instructions for restore and you may have to backup before restore.
iTunes: Restoring iOS software - Support - Apple

Can I use apogee jam on ipad 4 with lightning 30 pin adapter?

Can I use apogee jam on ipad 4 with lightning 30 pin adapter?

OKAY Mikivai73, here's what I found: no less than TWO cheap alternative-brand imitation connectors that go 30-pin to lightning, failed to even make apogee jam device light up blue.
Spent hours mucking with it. Finally tried proper genuine apple usb to lightning connector with the OTHER cable that comes in the apogee JAM box, and it worked straight off!
So, I am buying a genuine pukka APPLE 30-pin to lightning adaptor in the full expectation it will work, and have left questions for the Ebay guys who sold the two cheap (less than 5 pounds sterling) alternate adaptors.
For info, I got the Ipad 4,and the cheap adapters, one looks like the real apple one, right down to packaging, the other is a stumpy little thing, no cable just a plastic connector, with 30 pin one side, lightning other side.
That's it, I am ordering from the apple store now, can't be more certain than that.
best regards from sleekitwan.

Problem with running three tier demo

Hello,
I have a straightforward question( I think :-)). I am running one of the demos -three tier example with wls81. I have got everything built with the ant script and the database data repopulated. Weblogic is also running and the jsps display fine. Its just that when I try to execute the JSPs I get an exception
Exception Description: Several [3] SessionLoaderExceptions were thrown:.
Even this wouldnt be a problem but I see no log information whatsoever. I am posting the sessions.xml here (it has full logging turned on) but the logging does not seem to go to the system.out console. Is there something I need to configure in weblogic vis a vis JDBC connections ? When I logon to the database using sqlplus all the relevant tables -employee, address,project, are all populated. So what needs to be fixed here ?
<toplink-configuration>
     <session>
<name>Session</name>
     <project-xml>
D:\ORACLE\companionCDHome_1\toplink\examples\weblogic\wls81\examples\servletjsp\config\EmployeeProject.xml
</project-xml>
     <session-type>
<server-session/>
</session-type>
     <login>
<driver-class>oracle.jdbc.driver.OracleDriver</driver-class>
<connection-url>jdbc:oracle:thin:@abc.xyz.efg.com:1521:uvw</connection-url>
     <platform-class>
oracle.toplink.internal.databaseaccess.OraclePlatform
</platform-class>
<user-name>aswin</user-name>
<encryption-class-name>oracle.toplink.internal.security.JCEEncryptor</encryption-class-name>
<encrypted-password>443DF8010AAB71FCC11817B4269EB71B</encrypted-password>
</login>
     <cache-synchronization-manager>
<clustering-service>oracle.toplink.remote.rmi.wls.WLSClusteringService</clustering-service>
</cache-synchronization-manager>
<profiler-class>oracle.toplink.tools.profiler.PerformanceProfiler</profiler-class>
<enable-logging>true</enable-logging>
     <logging-options>
<log-debug>true</log-debug>
<log-exceptions>true</log-exceptions>
</logging-options>
</session>
</toplink-configuration>

You don't need to click that button as there are no values necessary to pass. Further, you can add a new demo_hostsample target manually, you don' t need to use the guided discovery. Go to Setup->Add Target->Add Targets Manually. Select "Add Non-Host Targets by Specyfing Target Monitoring Properties", select Demo Plugin Sample Host, and select your Monitoring Agent, and click Add Manually. Then enter the Target Name (MyHostSample for example) and for Use Generated Data, enter "true" if your agent is on Linux or "false" if your agent is on any other platform.

Got a problem with BIOS in my board MSI 785GM-E51

i have a MSI 785GM-E51 board,i got a problem with the graphic card bus interface,it still run in 8x not in 16x
i try to disable a onboard graphic on BIOS,but i not find it.
and last i try to update BIOS to v2.4 n' not work too.
this a example;

Quote from: Bas on 08-March-10, 21:21:36
You do not need to disable the onboard.
As for the plug-in card, there is nothing in the BIOS to make it work 8x or 16x.
Make sure your card is seated correctly, else it will work but at lower number of lanes.
What program is telling you it's 8x?
GPU-Z

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

HELP! i got a problem with my mobo 945GCM7-L

HELP! i got a problem with my mobo 945GCM7-L
specs;
*mobo = MSI 945GCM7-L(MS-7507) driver installed
*cpu = Intel Pentium E2180, LGA 775
*BIOS = american megatrends version 3.1
*sdram = DDR 2 1Gb
*GPU = sparkle/ nvidia 8500gt ddr2 1Gb128 bit (direct X9.0c and driver installed)
*HDD = seagate sata 80Gb (3Gb speed enabled 'no jumper')
*OS = XP PRO SP2
PROBLEM:
*sometimes it just hang-up (one application only) like a simple Microsoft word 2007.
*while playing DOTA (LAN gaming) = in just a couple of minutes you will experience a lagged then suddenly you'll be disconnected from the game
Isolation:
change the SDRAM with lower and higher RAM = same problem
change the GPU with higher and lower model (driver installed) = same problem
cable connection + good connection = same problem
take note;
I GOT 4 UNITS WITH THE SAME SPECS = 4 UNITS WITH THE SAME PROBLEM
NOW WHAT???

Does it hang using the onboard VGA? Try with prime 95 or orthos for stability testing, what spec are your psus?
You could try the v3.2 BIOS but I'm not sure it will help you.

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me how to recovery my id information back

Did you follow all of the instructions provided in the article that you linked from? If not, you must follow each and every step.
If you have, then all you can do is contact iTunes Support:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB

I got an email with a pdf. Is it possible to move it into Pages and be able to edit it?

I got an email with a pdf. Is it possible to move it into Pages and be able to edit it?

You can import the pdf as an image but it is not editable.
If you are after the text, open it in Preview and copy the text and paste it wherever you want, or open it in Adobe Acrobat Pro and convert it into a Word .doc.
Peter

I have a Samsung S5 and I got and email with a ringtone on it I would like to know how can I put that ringtone on my phone

I have a Samsung S5 and I got an email with a ringtone on it so I would like to know how can I put that ringtone on my phone from my email?

Did the ringtone come as an attachment? If so just save the file. If you downloaded it when you opened the email it should be in your downloads.

Got a fan with a three pin conecter instead of a four pin conecter

Similar Messages

Maybe you are looking for