Got a problem with BIOS in my board MSI 785GM-E51
i have a MSI 785GM-E51 board,i got a problem with the graphic card bus interface,it still run in 8x not in 16x
i try to disable a onboard graphic on BIOS,but i not find it.
and last i try to update BIOS to v2.4 n' not work too.
this a example;
Quote from: Bas on 08-March-10, 21:21:36
You do not need to disable the onboard.
As for the plug-in card, there is nothing in the BIOS to make it work 8x or 16x.
Make sure your card is seated correctly, else it will work but at lower number of lanes.
What program is telling you it's 8x?
GPU-Z
Similar Messages
-
HELP! i got a problem with my mobo 945GCM7-L
HELP! i got a problem with my mobo 945GCM7-L
specs;
*mobo = MSI 945GCM7-L(MS-7507) driver installed
*cpu = Intel Pentium E2180, LGA 775
*BIOS = american megatrends version 3.1
*sdram = DDR 2 1Gb
*GPU = sparkle/ nvidia 8500gt ddr2 1Gb128 bit (direct X9.0c and driver installed)
*HDD = seagate sata 80Gb (3Gb speed enabled 'no jumper')
*OS = XP PRO SP2
PROBLEM:
*sometimes it just hang-up (one application only) like a simple Microsoft word 2007.
*while playing DOTA (LAN gaming) = in just a couple of minutes you will experience a lagged then suddenly you'll be disconnected from the game
Isolation:
change the SDRAM with lower and higher RAM = same problem
change the GPU with higher and lower model (driver installed) = same problem
cable connection + good connection = same problem
take note;
I GOT 4 UNITS WITH THE SAME SPECS = 4 UNITS WITH THE SAME PROBLEM
NOW WHAT???Does it hang using the onboard VGA? Try with prime 95 or orthos for stability testing, what spec are your psus?
You could try the v3.2 BIOS but I'm not sure it will help you. -
Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so muchHi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help. -
I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me how to recovery my id information back
Did you follow all of the instructions provided in the article that you linked from? If not, you must follow each and every step.
If you have, then all you can do is contact iTunes Support:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB -
Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or accessory is not certified and may not work reliably with this phone".
How is this possible? I then phoned the shop and told them my problem. When I gave them the details I also found out that the imei No. in the iPhone is the same as on the original box. But the the Serial numbers are different. I already try the support centre but I’m over the 90 days.And there is no Apple Store in Namibia. I hope someone can help me here. Thanks, RalfarYou are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
At the creation of MCD we got the problem with Request
Hi All,
we are all very new to SAP MI,
At the creation of CD we got the problem with Request
<i><b>Creation of CD</b></i>
we gave these entries
<b>1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP</b>
In SyncBO tab we specified our SyncBO that is <b>ZNWW_EX01</b>
we selected the check two checkboxs that is
<b>->SyncBOs Expect Initial Value
->Data Visible to all</b>
2.when i am trying to <b>save the MCD</b> it will open one dialog box that is
<b>"Object can only created in SAP Package "</b> -> Continue
<b>"Link to Transport "</b> it says
<b>"Include MCD in Transport Request", "Yes","No"</b>
when i will go for <b>"Yes"</b>
it will give one more dialog box that is
<b>"prompt of workbeanch Request"</b>
it will give one Request bydefault that is <b>"CNWK900030"</b>
there we have some option that is
<b> ->Continue
->Create Request
->Own Request</b>
which one we will select ?
i will go for <b>Continue</b> it will open other dialog box it says
<b>"Include MiniApp in Transport Request"</b>
it says <b>"MiniApp must be assigned to a transport request"</b>
i will go for continue it will the message in the status bar
<b>"MCD Changed"</b>
can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?
Thanks and Regards
Dileep PainnamaneniHi Dileep,
<<Creation of MCD >>
<<we gave these entries >>
<b><<1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP>>
In SyncBO tab we specified our SyncBO that is ZNWW_EX01
we selected the check two checkboxs that is
->SyncBOs Expect Initial Value
->Data Visible to all</b>
Every thing is fine. We need to check Link to <b>SAP MI Home page</b> check box
<b>2.when i am trying to save the MCD it will open one dialog box that is
"Object can only created in SAP Package " -> Continue
"Link to Transport " it says
"Include MCD in Transport Request", "Yes","No"
when i will go for "Yes"
it will give one more dialog box that is
"prompt of workbeanch Request"
it will give one Request bydefault that is "CNWK900030"
there we have some option that is
->Continue
->Create Request
->Own Request
which one we will select ?
i will go for Continue it will open other dialog box it says
"Include MiniApp in Transport Request"
it says "MiniApp must be assigned to a transport request"
i will go for continue it will the message in the status bar
"MCD Changed"</b>
In SAP when ever we create any object(tables or MCDs) :
there are two things CUSTOMER NAME SPACE(stored locally in that system only) and FORIEGN NAME SPACE(can be transported)
CUSTOMER NAME SPACE objects starts with 'Z' or 'Y'
FORIEGN NAME SPACE objects starts with any other digit other than 'Z' or 'Y'
So youhave created MCD name CIBERNW which starts with 'C' (its not customer name space with z or y)
so it will be stored in package(so that this package can be transported to any other system later)
So what ever you have done is correct.
You can create your own request also.
But confirm once that whether you are supposed to store your MCD this that package.
<b>
can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?</b>
So this is the concept of request.
So this request is nothing but....
When ever we create tables or MCDs we try to save it..so if we are trying to create objects in Foreign name space(i.e without 'Z' or 'Y' inthe beginning) so it will ask to create this object in a package which requires request(transport request)
All objects are stored in package,( so this package contains many objects like MCD,SYNBOS etc what ever we store in it) so we can transport this package from one system to another system so to transport we need to generate a transport request for that package and them release that transport request.....
So once the package is released and we try to edit or create new objects in that package it will ask for some new request.....
Yes we can create our own request and later release it.
But in your case u can take up the default request and continue.
If this MCD is for only testing purpose(for our selfs)..means this MCD is just for our testing sake..its better to create it in Customer name space..starts with 'Z' or 'Y'.
I hope its clear.
Cheers,
Karthick -
Hi , I have an iPhone 5S and I have got a problem with the app store : iI can't update my apps , it is asking me to change frim the UK store to go to the french one , but i have already changed it and I am in the French one !! Help !
Have you tried signing out of your iTunes & App Store on your device and then back in again - Settings>iTunes & App Store, click on Apple ID, then on Sign Out. Then sign in again and see if it accepts the password.
If that doesn't resolve the issue, try resetting your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the Slide to Unlock screen will display. See if the problem is resolved.
Cheers,
GB -
R7770-PMD1GD5 got a problem with assassin's creed 3
bought this card
and got this problem with max setting.
This happens when I turn AA to very high. What is the problem?Quote from: knight_9 on 14-December-12, 14:37:35
No, this only happens with AC3. I tested it with Far Cry 3 which the only graphic intensive game I have at the moment. I can max out the setting with FC3, the game is choppy but I can't reproduce the case.
First of all, the market is full of buggy games.
Secondly, R7770 is a mid-range (cheap) graphics card.
With only 128 bits memory interface, don't expect to play complex games at high resolutions, 8X AA and great FPS values.
To get an idea, GTX 560 is faster than R7770.
GTX 560 is a good GPU, but not a great one. -
why can't i downgrade to mavericks? i have got some problem with yosmite. i would like to downgrade to mavericks.please help me how to get it ? thanks
Hi here are a couple of links you may find useful, the first is if you have made a time machine backup, the second if you have not.
http://osxdaily.com/2014/10/22/downgrade-os-x-yosemite-to-mavericks/
http://www.macworld.co.uk/how-to/mac-software/revert-back-mavericks-from-yosemit e-3581872/ -
I got some problems with my 3D in Photoshop can someone help me ?
I got some problems with my 3D in Photoshop.I press the 3D button and its showing me nuthing.If someone can help me ...Please... Thanks.
Yes, you have to have a document open or you can open a 3D file (OBJ, 3DS, DAE, LMZ, or U3D)
If you open a document and then open the 3D Panel there are a variety of create 3D options. -
ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx
- Reboot the computer
- Try DFU mode and then restore/update
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Delete the update file so that new one has to be download.
IPSW file location for Mac and Windows
- Try on another computer to help determine if you have an iPod or computer problem. -
I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?
Thank uClear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
I have got a problem with my screen... my screen becomes blurred, horizontal streaks. What can i do ?
Hi saigon88,
If you are having issues with the display on your MacBook Pro, you may find the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden -
Not event 6 month i already got a problem with the sound and i cannot watch youtube or any video using my Ipad. Please help
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
got big problem with my iphone4 , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..
How do you know its charging very very slowly? Is the screen back on?
Once a month you should charge your phone to 100% then drain it, then charge it back up to 100%.
Just leave the phone in and do what is said above.
How long do you think it will take to charge to 100%?
Maybe you are looking for
-
hi, i can not install iso7 my iphone3gs and other thing how use face time ?
-
Upgrading from FC Express to FC Pro x
Can I upgrade to FC PRO X from FC Express or do I first have to buy FC Studio for $999.
-
Hi, Please let me know how SAP would calculate depreciation in the following business scenario. Jan 1st 2004: An Asset is aquired for $1000. Life time: 3 years Depreciation on Dec 2004: $300 Depreciation on Dec 2005: $300 Value left on asset: $400 On
-
Overall Status of order Being processed after complete PGI & Billing
Dear All, Before writing this post i tried all possible solution available on SCN & internet. In sales order overall status (GBSTK) is Being processed after doing complete delivery and Billing. I tried many things changed the completion rule also run
-
How to use portrait still photos in Premier Pro CS4
I am new to Premier Pro and want to insert a bunch of still photos into a video I am making of a recent vacation. A lot of the photos have a portrait orientation, and when I import them into Premier Pro, they are automatically turned to landscape.