Got a Safari update today, now no worky right??!!!

I got a Safari update today.. Did the update... Now evertime i open safari its asking me to change all keychain passwords or something... Freezing up also..
sometimes its real slow opening now... How do i fix please????!!!!!

R jr . . .
So did this update show up in your Software Update?
Or did you go to the Apple site yourself, and get it?
What version of Safari did you update from?
What version did you update to?
What OS are you running there?
Your profile at the bottom says 10.4.1.
Is that correct?????

Similar Messages

JAVA ERROR after safari update today 7/21/11 HELP PLZ!!!

Hello after installing the safari update today, after restarting or turning on my macbook pro i get this error about java. My java has also been running really slow, after it. Can anyone help me find a way to take it off and fix this java error?
[IMG]http://i436.photobucket.com/albums/qq90/IJoNaN/Screenshot2011-07-21at113050PM.pn g[/IMG]
plz look at the picture to get a better understanding of the error i get thank you.
http://i436.photobucket.com/albums/qq90/IJoNaN/Screenshot2011-07-21at113050PM.pn g

Hello after installing the safari update today, after restarting or turning on my macbook pro i get this error about java. My java has also been running really slow, after it. Can anyone help me find a way to take it off and fix this java error?
[IMG]http://i436.photobucket.com/albums/qq90/IJoNaN/Screenshot2011-07-21at113050PM.pn g[/IMG]
plz look at the picture to get a better understanding of the error i get thank you.
http://i436.photobucket.com/albums/qq90/IJoNaN/Screenshot2011-07-21at113050PM.pn g

Installed latest update today, now cannot access F/B app

Hi, installed the latest update today, now cannot access F/B via the App!! Okay online but the App looks like it is loading...blue page etc, then immediately reverts to home screen. Have checked settings and F/B is enabled
Please help x

try closing it by douple tapping the home button to reveal multi-tasking screen. swipe from right to left till you see the fb app. then swipe the app up and off the screen to close.
Tap home button again to return to home screen. Now, open fb app

HT5268 I down loaded the new update today, now I can't play my favorite card game..? HELP!

I downloaded the new java update today, now I can't play my favorite card game : ( Why?

I don't know. But you should check to see if there is an update available for the card game.

Installed os x update today now syncing from camera hangs with iphoto 9

os x update today now syncing from camera hangs with iphoto 11 ver 9.1.3

Reformat the card with the Camera.
Regards
TD

TS3899 just got an iphone 5s today, now all of a sudden when I delete an email on my phone, it also deletes it on my home computer? I don't want it to do that - any ideas?

Hi,
Just got an iphone 5S today. Now all of a sudden when I delete an email on my phone, it also deletes it on my home computer - which I don't want happening............any thoughts?
Thanks.

Assuming that Chris is correct, you can set up the account on the phone as a POP3 account. This will allow you to delete mail from the phone without deleting it from the server, but it also means that you will have to delete mail from the phone separately, so you will have to delete mail twice, once from the phone and once from your computer.
If you want to do that see: Forcing creation of a POP or IMAP email account

HT201412 my ipad got the new update and now it's not responding to anything. It keeps telling me to plug into itunes but when I do, it's saying there was an error and it

I can't turn my Ipad 2 on, It got the new update yesterday and has not turned on since. Please help

Have you tried restarting, resettng, and restoring as explained in the TS3281 article you attached?

I installed the latest Security and Safari update. Now Safari crashes and Chrome won't launch at all. Can I revert to the software state before the newest updates?

After installing the latest security and Safari updates (18 Sept 2013), Safari crashes and Chrome won't launch at all. Can I revert to a software state before this latest install?

The problems are caused by third party input managers/enhancers that have not yet been updated by their developers to comply with the standards used by Safari 3.2.1. and/or Safari 4.
In your case these are:
x7e3000 - 0x7e3fff com.aladdinsys.mmenabler 7.1.0 (99) /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle/Contents/MacOS/ MagicMenuEnabler
0x7e7000 - 0x7e7fff com.yazsoft.SDEnhancer ??? (1.0) /Users/peterdignam/Library/InputManagers/SpeedDownload Enhancer/SpeedDownloadEnhancer.bundle/Contents/MacOS/SpeedDownloadEnhancer
0x254a000 - 0x254dfff com.yazsoft.SDSafariBundle ??? (1.0) /Users/peterdignam/Library/InputManagers/SpeedDownload Enhancer/SpeedDownloadEnhancer.bundle/Contents/Resources/SDSafariBundle.bundle/ Contents/MacOS/SDSafariBundle
You fill find them in one or either of these folders:
Home/Library/Input Managers
Hard Disk/library/Input Managers
Hard Disk/Library/Application Support
although the exact location is indicated in your crash report as quoted above - look under 'Binary Images'.
Close Safari and delete them, then restart Safari and it should be working normally.
Check with the developers of the plug-ins in question for updates that are Safari 4 compliant.

I got the IOS6 update, and now the App Store always crashes. What happened?.

I recently updated to the IOS6 update, and now the App Store crashes every time I use it! It never happened before the update. What happened?

Common problem. See:
IOS 6 App store crash: Apple Support Communities

Downloaded Safari Update and Now Safari Won't Open

This past Sunday I was informed that I needed to download an update for Safari. I did this (during a major thunderstorm, but never lost power) and everything seemed to go through properly and worked normally. I restarted my computer when it prompted me to do so. A couple hours later I tried to get on the internet and nothing happened. The icon bounced a couple times and Safari's name popped up at the top of my computer next to the apple icon, but no window opened. I tried to hit open new window and so on....when I got frustrated and quit Safari it told me me that I had like 7 windows open and did I still want to quit. I clicked yes and then another window popped up stating that Safari encountered a problem and needed to close unexpectedly. I reported it to apple like 12 times. When I called apple they expected me to pay for them to fix it, even though his explanation was "This version of Safari is probably not compatible with Tiger". The other issue is that my disc drive went bad a couple years ago and I never fixed it, so I could not re-install the original Safari. Can anyone help me fix my internet without having to pay a computer store??

HI,
If the optical disk is broken, then you can't use your install disk to repair the startup disk if necessary.
Try booting in Safe Mode
It takes a little longer then a normal boot. Once you are in Safe Mode launch Disk Utility (Applications/Utilities)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
Click Verify.
At least this way you will know if there are problems with your startup disk before trying to troubleshoot Safari.
When you are finished click the Apple Menu / Restart.
Also I was able to delete my cache and now I can make an attempt to open a new tab, but then it immediately closes and gives me the unexpectedly had to quit message this time with a new number at the end of that KERN blah blah blah one and that number if it helps is 0x0000000c
If the startup disk is ok, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Now copy/paste the entire contents of the Crash Reporter window into your reply here. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

Installed updates today, now things don't work....

Today when I turned on my computer it told me I had a few updates that needed installation. Safari Beta update, an iTunes update, secuity update, and I think a firmware update. During the process of installation after downloading, my computer locked up (not completely, but beach ball locked up), so I did the last thing I should have done and turned it off. Now I can't run Safari, iTunes, or the Software Update from the apple icon. They will bounce once in the scroll list, but nothing happens. Unsure if there is anything else that doesn't work. Oh yeah, tried reinstalling updates manually. Installer doesn't seem to work either. Third party programs all work. Mainly I'm concerned about the "Software Update.." not working.

When you have done what Steve suggested, do this:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via System Updater in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set System Updater to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

Openssh and dhcpcd updated today - now sftp cannot find local servers

Hi folks,
I did my update thing this evening 'packer -Syu' and openssh was updated to 6.6p1
[2014-03-19 18:44] [PACMAN] upgraded openssh (6.5p1-2 -> 6.6p1-1)
and dhcpcd was updated to 6.3.2-1
[2014-03-19 18:43] [PACMAN] upgraded dhcpcd (6.3.1-2 -> 6.3.2-1)
and then sftp stopped working as it was ok before the updates.
I get error messages like this:
[dellgx270:steve] /home/steve
1442 20140319 234019 $ sftp laptop.local
ssh: Could not resolve hostname laptop.local: Inappropriate ioctl for device
Couldn't read packet: Connection reset by peer
[dellgx270:steve] /home/steve
1443 20140319 234030 $ _
This is how I network my machines. Its much lighter on resources than either NFS or Samba, but is a bit tricky to configure at first go. The Arch Wiki has some older stuff in it and is a bit confusing for first-time users but I also 'googled' other forums and eventually got things configured correctly. Ubuntu flavors work out of the box, but Arch needs some extra leg-work to get things organized.
I tried removing the ~/.ssh/known_hosts files but that didn't work. Since the error was a resolver issue (according to my error messages) I tried using the IP address of the laptop.local machine 192.168.2.10 and that worked both at the command line and via my file manager thunar (I run XFCE on all my boxes because it works well and with a few additions I can get it to do what I want) ...
Problem is, the IP addresses are assigned by dhcpcd (which means they can get reassigned somewhere else) so I would prefer using the host.local names in scripts and bookmarks etc.
Anyone else having issues of this sort? Inquiring minds need to know!
Regards,
Steve Dupuis
Oracle DBA, Unix and NT Systems Management Services
SGC/EDP Consultants INC. Ottawa, CANADA
mailto:[email protected]

From the Arch Wiki - Networking - Avahi page (this is what I've been using for more than a year):
"Avahi is a free Zero-configuration networking (zeroconf) implementation, including a system for multicast DNS/DNS-SD service discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. It is licensed under the GNU Lesser General Public License (LGPL)."
I don't use hosts file or anything else to resolve the names of the local workstations and/or devices. I have a relatively new Sagemcom fibre router / modem device, and it has been working well since installation ..
What I've been trying to say - as in my initial post - that this worked properly before I did the dhcpcd update. I'll recheck all the settings for dhcpcd, ssh and sftp (and anything else in my networking configurations) to see if anything is in error. There were no .pacnew files created during that software update. I'll post anything that I learn.
Regards,
Steve Dupuis

My phone accidentally got disconnected when updating and now it is frozen on the picture to connect to itunes.

help with updating software.

try holding down the power button on your phone and shut it done then wait a few minutes and turn it back on....i used to have an old ipod when it first came out....and it would freeze on me from time to time and i would have to shut it down then turn it back on...if you're wondering if i still have it i dont since i got the iphone 4s i gave it to my older brother since he wanted it

Recnetly got a windo0ws update and now cannot use firefox..IE9 works but not firefox -- it hangs ..nonresponding

Just did a securiyt update from microsoft and now firefox uses huge memory and hangs all the time.. I cannot use it anymore
I am running sindows 7 and it has always worked jsut stopped with recent windows updates.

-> Start Firefox in Safe Mode by holding down SHIFT key while starting Firefox
* As an alternative method, press '''Win''' + '''R''' key combination and enter one of the following in the Windows Run box:
** firefox -safe-mode
** "C:\Program Files\Mozilla Firefox\firefox.exe" -safe-mode
** "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -safe-mode
* Firefox Safe Mode window will appear -> select all options and click '''Make Changes & Restart'''
-> click '''Firefox''' button -> go to '''History''' and click '''Clear Recent History''' -> ''Time range to Clear: '''''select Everything''' -> click '''Details''' button -> select all options and click '''Clear Now'''
Check and tell if its working.

The printer I had just installed was working fine. Then I sinstalled the foxfire update today now I can't print from the internett

installed printer a couple of hours before the update was available. update mentioned I was missing current plug in for printer assumed it would use the old. C an I reverse the update and return to where I was? New printer worked great for a moment there.

installed printer a couple of hours before the update was available. update mentioned I was missing current plug in for printer assumed it would use the old. C an I reverse the update and return to where I was? New printer worked great for a moment there.

Got a Safari update today, now no worky right??!!!

Similar Messages

Maybe you are looking for