Got an error code after running AHT. Now what?

I ran the Apple Hardware Test and got the error code: 4sns/1/40000000:th1H-83.265
I looked it up and it apparently means there's a problem wuth my heat pipe or heat sink. Makes sense because my MBP burns up and fans really start going when running a game, movie, or photoshop. Does this mean I have to replace something or what? How much will it cost me if I take it in for repairs? I no longer have warranty. I had to replace my harddrive after it failed in Feb 2012 so I will not be happy if it turns out the failure was related to this heat problem and never fixed.
Mid-2009 13" MBP running OSX 10.8

That error is indeed a sensor failure. Make an appointment at an Apple store genius bar. It is a hardware failure that only they can resolve. They will tell you what costs are involved, I simply do not know that.
Ciao.

Similar Messages

Error Code After Running Apple Hardware Test

I ran apple hardware test (I'm having problems where my computer freezes for like 10 seconds with the mouse being movable... but it happens very frequently. like once a minute. it's SOOO ANNOYING)
this is the error i got after running apple hardware test:
(it came out as a Mass Storage error... which is Hard Disk i guess)
**ERROR*CODE***ERROR*CODE**
2STF/8/3: S-ATA Bus 0-Master
**ERROR*CODE***ERROR*CODE**
Does anyone know what I can do to fix it. Apple Hardware Test only allows me to find the error and then restart or shut down... which is useless cause what is the error code supposed to mean. I've only got Apple 1 yr repair support left... so I cant call up Apple or anything. Does anyone know anything about this and what I could do to fix it!?
I know about this: http://www.apple.com/support/imac/repairextensionprogram/
I might go to the apple store, but I dont wanna make a trip out there for nothing.
Does anyone know what I can do or should I just take it to the apple store.

Actually, i just spent like 1 hr working with disk utility using the os x install disk and i think it finally worked. im so happy for myself! yay... i wouldnt accept no for an answer. Disk utility kept saying "oh first aid failed because it didnt exit right" or something... total garbage response... i kept pressing verify disk and then repair disk and then i did the verify permissions and repair permissions too... didnt really know what i was doing with the permissions... but it finally worked so thats all that mattered! yay... its back to normal!!

I got the redemption code....now what?

I purchased the Photoshop CS6 Student and Teacher card a day ago, and now I am stuck. I got the redemption code and serial number. It just ends there. ....What now? There is nothing explaining what to do next. It has been over 24 hours since I have gotten the code, and nothing has happened. I should be getting a download prompt but I am not getting it. Is this normal? I spent a good $390 on this and I'd rather not be wasting it.

JBoss1995 are you looking for the installation files for Photoshop CS6? If so you can download the software from http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html.

Tried to restore and update but got error code after download, iphone 4 on verizon...ios 4.2.1 tried to restore and update but got error code after download

iphone 4 on verizon(16 gb) ios 4.2.1 tried to restore and update but got error code after download.... all the iphone does is sit there with the picture to connect to itunes. This is very important, please help!!!!!! updated itunes and restarted and have tried everything... this iphone has never been synced or backed up with itunes. please help!

error 1015 usually means you have a jailbroken devices, which per the term of use of the forum, you can't get any help here.

After an apple hardware test on my iMac I got an error code ?

So I did an extended hardware test on my apple imac and after an hour of testing i got this error code: 4MOT1/140000003: HDD-1363. The next day I did another hardware test on my apple imac but this time iI did a quick hardware test and after about five minutes of testing this time I got the same result except this time the 4-digit code or number after the 'HDD-' changed to a different one, like... 1476. So what does this mean, I mean my computer is working perfectly fine without any problems (except for that one time when my brother punched my iMac's screen really hard a couple of times and a couple of hard punches on the hard drive however it was working fine but he did it again and it froze the time he did it again and i had to restart it but everything was STILL working fine after I restarted it !) but when I do the Hard ware test I get those errors so what does this mean ? Is it possible to fix ? Would apple fix it for free as my warranty has expired ?
All help appreciated
Thanks
Yaseen

don't know why, but try using Disk Utility to repair the drive:
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.

2106f Error Code after Internet Recovery Attempt

Anyone ever get a 2106f Error Code after Internet Recovery Attempt? What next?
Background: Macbook Pro (late 2011) shows startup progress bar, goes ~ 1/10th of distance, freezes, then goes black after ~2min. Did this:
1. Clean startup attempt (shift)
2. Zapped PRAM (option command P R)
3. Reset SMC, Startup
4. Attempted Internet Recovery process (Cmd R) over ethernet connection, but after several hours, got the -2106F error.
MacBook Pro 2.2 i7 Late 2011

How long were you able to watch this movie before it crashed?
Now is it everytime you boot up, you get the BSOD 0xc0000001 ?
Can you start up in SAFE MODE?
"Knowledge should be unrestricted and the most important commodity we can offer to help one another."

I got the error code 1603 when I was installing labVIEW6.1 in windows2000 professional(chinese)

I bought the labVIEW RT software and the hardware.It included the LabVIEW6.1 FDS.
I got the error code,and I let the install program go on.After the install completed,I found my LabVIEW worked well expect the DAQ palette.there are no "data acquisition" palette.
When I installed it in windows XP(chinese) on the same computer,Everything was good.And when I installed it in windows2000 professional(chinese) on another computer,the same error code appeared.
I am hungering for your answer.thank you very much!

It appears that LabVIEW DAQ support was not installed.
Run the installer from the CD, choose custom install, and make sure that the DAQ driver installation is checked as well as support for LabVIEW 6.1.
If it is checked (indicating it was installed) then try uninstalling just the driver portions and reinstalling it.

ERROR [code=1] Running adjopy.class

Hi DBA's
When i am applying patch 5903765 i got the following error.
i checked the write permission and owner permission, it seems everyting is fine and I run manually following script, i got the same error.
adjava -mx512m -nojit oracle.apps.ad.jri.adjcopy @/s03/CLONE/clnappl/admin/CLN/out/apps.cmd
Kindly help me to resolve the issue.
=============ERROR=============================
About to Write undo archive : Mon Mar 16 2009 14:22:33
Writing undo archive /s03/CLONE/kiranpatches/5903765/backup/CLN/aqherptestdb/java
ERROR: I/O or zip error while attempting to read entry meta-inf/jdev-ext.xml in zip file /s03/CLONE/clncomn/java
Error(s) have occurred; exiting with status 1
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
AutoPatch error:
ERROR [code=1] Running adjopy.class
AutoPatch error:
Error updating master archive
Best Regards,
SG

SG,
Please review the following note:
Note: 376096.1 - I/O or ZIP Error While Attempting To Read Entry meta-inf/jdev-ext.xml
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=376096.1
Regards,
Hussein

Error code after downloading album

i downloaded the new Evanescence cd and after it started downloading all i got was error code's for every song except for the interactive booklet and the interview that came with the album download. i have been charged the $10.99 for something that i do not have!!!!! How do i get my refund!?!?!?!?!?!

i looked into the "purchased" tab and none of the songs appear in there, not even the error codes. my bill shows $9.99 for something i never got.
just checking. are we talking about doing a "Store > check for purchases ..." as per the following document?
How to resume interrupted iTunes Store downloads
... or do you mean "clicking on the 'Purchased' playlist in the itunes sourcelist"?

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

While itunes was restoring my ipad in recovery mode, I got an error message requesing a passcode. What do I do now?

While itunes was restoring my ipad in recovery mode, I got an error message requesing a passcode. What do I do now?

Hi Amandalee498,
It sounds as if your Windows computer is not detecting the iPad in iTunes. Let's see if we can get that fixed up.
I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thanks for using Apple Support Communities.
Best,
Brett L

TS3694 IVE GOT AN ERROR CODE 9006 WHILE DOWNING TO IOS6 WHAT CAN I DO THIS IS THE FORTH TIME IVE TRIED

ive got an error code 9006 while downloading to ios6 what can i do to update please ?

From the link your question was posted from:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Error code after itunes update -42404

error code after itunes update -42404 cannot connect to ipad it is telling me to restore ipad, and cannot connect to store...
Message was edited by: CFC.Steve

I assume you updated itunes on your computer. PC or Mac?
Look at the posts in the More Like This area to the right side of this page.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

I updated iOS in iPhone 5 just now... But I can not download/install apps (Skype,Facebook etc.) from apple store...it shows error code -1009... What can I do...?

I updated iOS in iPhone 5 just now... But I can not download/install apps (Skype,Facebook etc.) from apple store...it shows error code -1009... What can I do...?

The error 1009 error is normally associated with a blocked country. There are a list of countries that Apple is not allowed to sell their software to due to US restrictions

I got this error code when I was updating camera raw in CS6 Error Code: U43M1D207.

I got this error code when iI was trying to update camera raw in CS6 U43M1D207

Have you tried to download and install directly from Adobe, instead of using the Updater in PS?
http://feedback.photoshop.com/photoshop_family/topics/camera_raw_6_6_update_fails_to_insta ll

Got an error code after running AHT. Now what?

Similar Messages

Maybe you are looking for