Got an error when installing SocialMiner "An error occurred when trying to format sda6"

Hi,
I got an error "an error occurred when trying to format sda6", when trying to install SocialMiner 8.5.1 on VMWare. Then it stopped installing with blank screen.
Could anyone please let me know what is this error and what could be the resolution for this.
Thanks in advance.
Regards,
Sudheer

Bjornno11 please utilize the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to resolve the current error.

Similar Messages

TS3694 Does anyone know what error message 6 means? No detailed explanation of 6 on this page. Got that msg when trying to update iPhone (4S) OS software.

Does anyone know what error message 6 means? No detailed explanation of 6 on this page. Got that msg when trying to update iPhone (4S) OS software.

http://support.apple.com/kb/ts3694#error6
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Downloaded a trial Light room and got "An error occurred when attempting to change modules." Macinto

Downloaded a trial Lightroom and got "An error occurred when attempting to change modules." Macintosh. Created another user and it works. WIll this happen if I make a full purchase? I want to use my administrator user.

Hi ecl44,
This might be due to incorrect preferences / permissions issue on the Mac.
You might want to refer to the KB Doc : http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom.html

HT4623 my phone got an error message while trying to update

my phone got an error message while trying to update

I received an error message when attempting to install the latest update as well. Went through all steps, downloaded through Itunes and when asked to update my apple id by entering an e -mail, the following error message appears:
Could not sign in
There was a problem connecting to the server.
However, I was able to access google/gmail account servers prior to installing iOS 6. Now my phone is stuck at this error message and I can't use it!

Disk utility reports "Device could not be opened" - error when trying to format a new drive in a Mac Pro 1,1

MacPro 1,1 Quadcore 3 GHz (2006 "Woodcrest")
32 GB RAM
ATI Radeon HD 5770
OS X 10.7.5 Lion
I have encountered the following behavior when trying to format a new drive with disk utility. This description has also been send via the Mac Pro feedback as a bug report to Apple.
On searching the web and forums with this particular error message and behaviour I could not find any usful results. So maybe the following description may be helpful for some users.
Best regards.
1. Drive Bay 1 contains the original 250 GB Startupdisk. It works without errors.
2. Drive Bays 3 and 4 contain each a WD Caviar Black 2 TB SATA 3 HDD. They work without errors.
3. I have purchased a third WD Caviar Black 2 TB HDD.
4. In Drive Bay 2 there has been a Seagate 750 GB HDD, which worked in conjunction with all the other drives without error.
5. I exchanged the Seagate HDD in Drive Bay 2 with the new WD Caviar Black 2 TB HDD.
6. On starting the system, it will report to initialize the new drive.
7. On trying to initialize the new drive with disk utility it reports the error [translated from German] "Erasing of the volume has failed. The device could not be opened."
8. I thought that the drive is faulty. Thus I created an RMA-Case at WD. They exchanged the drive without problems.
9. On getting the exchanged WD Caviar Black 2 TB drive I put it in Drive Bay 2 as before.
10. On trying to erase and format the exchange drive I got the same error message "Drive could not be opened."
10.1 On selecting the physical drive in the devices list, disk utility reports all information in the bottom area of its window as usual, e. g. hard disk description, connection bus, type and place, capacity, write status, SMART-status, partition scheme.
10.1 On leaving that drive selected in the devices list and clicking the info-button, disk utility will also report additional information as usual, e. g. Name, Type, partition scheme, media-identification, media name, media type, device tree, … , number of relocated sectors, etc.. All this information appears to be valid, as can be compared to the other devices information inside the other Drive Bays. Also the disk numbering scheme appears to be standard - 4 HDDs give the numbering disk0, disk1, disk2, disk3.
10.2 From that information I conclude that the SATA-bus and connectors electrically work properly, the drive has spun up and can be accessed by the system normally.
11. I powered down the computer, took out the HDDs from Drive Bays 3 and 4 and put the caddy with the new exchange drive in Drive Bay 4 [Maybe, I could have also just left it alone in Drive Bay 2, or 3].
12. After powering on the system, disk utility will quick format the exchange drive without any error message. Also, when erasing again by selecting the option to write zeros to the drive, disk utility will finish without error.
13. After disk utility finished formatting, I put back the original drives into Drive Bay 3 and 4 and put the now newly formatted drive back into Drive Bay 2.
14. After switching on the computer the system start and login proceeds without any error message. All drives appear as expected on the desktop.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Get error when trying to upgrade to IOS5 - An error occured while trying to Back up ipad -402653138

Help
I am trying to upgrade to IOS5 and i cant get past the backup step of the upgrade - I keep getting An error occured while trying to Back up ipad (-402653138). I have tried removing my current backup and letting the update do the backup but still get same message.
I also get a warning right when I start the upgrade process that says I have purchased apps that have not been transfered and wants to know if I want to continue??? Not sure why I get this warning - I have ran the transfer purchases option several times and it seems to work. However, if I go under store and look at the purchases for my ipad it dosnt show any??? I would assume it should?
I have tried syncing and backing up, rebooting, all latest versions of itunes, etc.
Any ideas or help would be much appreciated.
Thanks
Erik

I took a leap of faith and finally got the update with no issues. Here's what I did:
First did yet another backup. Next, disabled all anti-virus and anything related (running Norton 360). Next, turned off Home Sharing.
Instead of "Update" I selected "Restore". Followed prompts as though I wanted to restore and update. Selected my latest backup and off it went. First did the wipe, then ios5 update, then restarted and began to sync. Sync took about 2 hours as I have lots of apps, photos and some TV shows I forgot were on there.
In the end, I had the exact same configuration. All apps on their pages as before the update, all folders intact and even all game scores and data from apps. Hurray!
Now just going through the App update process of the many (85) that showed up in App Store icon.
Hope this helps!

An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS)

TS4268 Help! Probably you have never experienced this, but I have lost the ability to iMessage. When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage." It's not a huge deal, but people with iPhones can't t

Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback...

Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback...

I am using Adobe Reader with paid up service through May 2015. When I attempt to convert a file from PDF or to PDF, I get the message "An error occured while trying to access the service. What do I need to do to access the service paid for?

I am using Adobe Reader with paid up service through May 2015. When I attempt to convert a file either to PDF or from PDF, I get the error message, "An error occurred while trying to access the service". What do I need to do to get access to the service I have paid for?

Hi DeaconTomColorado,
Please see "Error occurred when trying to access this service" when logging on to Acrobat.com.
Adobe has just released an update to Adobe Reader, so if you're accessing the service via Reader, please let us know whether the update helps resolve the issue.
Best,
Sara

Receive error message "An error occurred while trying to access the service" when I try to convert a file?

When I attempt to convert a file, either to PDF or from PDF I receive the error message "An error occurred while trying to access the service" what can I do to resolve? I already applied updates and attempted to fix?

You could always sign into Acrobat.com directly and use the service through the web site if it's a critical need.

HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS.

When i try to convert from PDF to word it says "an error occurred while trying to access the system". I've paid for this what is going on?!

When i try to convert from PDF to word it says "an error occurred while trying to access the system". I've paid for this what is going on?!

Hi,
I have the same problem. Here is the screenshot of the error and I am using Windows 7 and Adobe Reader XI version 11.0.10.

When trying to convert PDF to Word I get message "An Error occurred while trying to access this Service" Never had problems before how can it be fixed

When trying to convert PDF to Word I get message "An Error occurred while trying to access this Service" Never had problems before how can it be fixed??

It appears that you have a subscription to one of Adobe's online subscription sersvices.
Here, you have a user-2-user forum for users of the free desktop PDF viewer Adobe Reader.
Some resources for following up with question about Adobe online services.
To contact support for acrobat.com subscription services:
https://www.acrobat.com/misc/en/contact-support.html
Other links to support:
http://helpx.adobe.com/contact.html
http://helpx.adobe.com/support.html
contact Adobe Customer Care on Twitter @AdobeCare.
Phone support (for a fee - have credit card ready)
800-833-6687, Mon - Fri, 5AM - 7PM PT
Be well...

HT201210 I got this error prompt while trying to update my ipad 2: Ipad software update server could not be contacted or is temporarily unavailable

I got this error prompt while trying to update my ipad 2: Ipad software update server could not be contacted or is temporarily unavailable

Try posting to the correct forum.
This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
Try posting to the iTunes for the Mac forum.

An error occurred while trying to access the service when trying to access adobe send since feb 28

I have been trying to access my adobe send to send some files keep getting error message : an error occured while trying to access the service"
everything was fine up until yesterday...

Is that "SendNow"? If so you may get better help in the SendNow forum here: http://forums.adobe.com/community/sendnow

Got an error when installing SocialMiner "An error occurred when trying to format sda6"

Similar Messages

Maybe you are looking for