Got blue and red screen error

i got blue screen error and then i restored my iphone 6+. Now i got red screen error.How to fix it?

Howdy cenk1234,
Welcome to Apple Support Communities.
I can imagine it would be frustrating to have your iPhone restart unexpectedly. Take a look at the article linked below and try the suggested resolutions.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Take care,
-Jason

Similar Messages

Iphone 6 shows blue and red screen and shut down

since some days my iphone 6 shows blue and red screen and shut down, after some minutes it restarts, today its already down 30 minutes.
What can I do ?

Hello Oliver,
Thank you for using Apple Support Communities.
The following article covers what you can do if your phone is restarting when you are using it.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Regards,
Jeff D.

My Iphone 4s was not dropped and when I went to use it the screen was completely covered in blue and red lines I can not see anything is there something that I can do to fix it?

The screen is blue striped and when you try to reset it goes to blue and red. Can not see anything HELP

Bring the phone to Apple for evaluation. Sonds like a hardware issue.

Webcam light on Qosmio F60 blinks between blue and red

Hi guys, I have a Qosmio F60. The problem I think I am facing right now is that the webcam light blinks between blue and red for a while and goes back to blue. And it gets kind of hot behind the webcam on the cover of the laptop.
Is it supposed to get hot when I make video calls?
And what could be causing the blinking of the led light for the webcam.

Hi
Dont know exactly what the blinking led could mean but Ive got one question;
Does the webcam work properly? Can you use this as supposed?
If yes, then I would not be worried
By the way the cam should not get warm I think the FL inverter which is placed behind the screen is warm but this is ok.

Touchsmart recovery discs fbi 945 red screen error

Hi guys, i have a hp touchsmart 310-1120a all in one computer, got 4 recovery discs sent out to me to restore computer back to windows 7. With no help from hp ringing and online 5 or more times, after 3 or so hours of installing i get a red screen with a fbi gui error 945, telling me to restart and order, so i cant finish installation, an ideas would be great to help out, no pc for 2 weeks and spent days on trying to fix .

Hi:
Please see this related thead from the business support forum.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/Full-restore-quot-red-screen-error-quot/m...
The one that worked for me was this post...
Solution:
When you finish installtion with errors. Boot PC with your OS from DVD; but not with HP disc's - just clean OS from MS. Then choose repair options and choose Startup Repair. When it finish; then remove disc and reboot.
If you don't have a plain W7 installation DVD or flash drive, make your own.
Download the applicable version of the W7 ISO file you need from the link below. Use the SP1 Media Refresh files.
http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languag...
Then use this tool to make the ISO file bootable onto a DVD or 4 GB USB flash drive.
http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool
If worst comes to worst, you can use the W7 DVD you made and the Windows 7 product key on your PC's case to install a plain version of W7 and then get the drivers from your PC's support and driver page.

Blue and red pictures

Hi, I have just uploaded about 800 pictures into a new album within a project (I keep things filed as 1 project per month and split them into albums for each day) from a concert I covered yesterday.
I have just had a look at a few images, seem fine as thumbnails until you go full screen, when the blue / red highlights and shadow warnings are turned on the whole picture is just blue and red (mainly blue actually) and it is impossible to get rid of it however much I do the sliders- if I turn control that off I get a pretty OK picture.
Am running 3.5 on Mavericks in a 2007 iMac with 6gig of RAM (just upgraded from 4gig).
I did a shoot with about a hundred pictures a few days ago and on Sunday it was fine - now it is the same - what is this program doing to me - I really wish I had kept 10.8 and Aperture 2.1 or whatever it was. Can I go backwards to revert in Time Machine I wonder ??
How does Lightroom run under Mavericks ?
Getting frustrated now.
Bill

I did a shoot with about a hundred pictures a few days ago and on Sunday it was fine - now it is the same
After updating to Aperture 3.5 all my Canon 5d Mark II raws were showing the "reprocess raw" alert and the highlights were overexposed.
After adjusting the raw fine tuning parameters - reducing the boost settings - they were much better, also reprocessing the raw helped. The Boost sliders had been reset to maximum value when I checked them.

RED SCREEN ERROR

I just purchased an all in one HP Pavillion 20 I am getting a red screen error when trying to restore the system
which HP sent me the 6 discs after following all instructions this RED SCREEN appears with file log jargon
that I do not understand after an 1 hour on line with support they tell me I have to spend another 170.00 dollars for a technician to come to my house ????? this cost me over 700.00 and that is a 2 weeks of salary for me can any one
help me ?????
This question was solved.
View Solution.

~Hi
How long have you owned the machine ??
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Im getting blue and red playback

anyone know how to fix this ? when im using webcam on messenger its ok but when I record something or use remote monitoring or motion detection. and i open the saved file . the video shows in blue and red colors and in zoom mode. while im recording everything looks ok . only the finish saved product looks like this.
i opened the files with windows media player , nero , ect... all the same
need help i already tried changing every option there is in the menus

anybody ? i just got the cam so I guess im a newbe. help me. this happened after i installed the new driver and webcam center, but i reinstalled the drivers and webcamcenter from the original cd again and it didn't help.
also is the webcams light supposed to be "ON" all the time ?

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

Hi i have a apple ipod touch 3G the power button doesnt work so i cant ever turn it off but i got home and my screen is just plain white how do i fix this thnx

i need some help i have a 3G ipod touch the power button doesnt work at all but i got home and my screen is just plain white how do i fix this

Let the battery fully drain. After charging for an hour try a reset (may not work).
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your comnputer and try to restore.
- If the screen is still white then it appears yu have a hardware problem and appointment at the Genius Bar of an Apple store is in order.

When I come from outside and press the home button to turn my iPod on, there is white, light blue and red lines but it is transparent enough that I can see my background, time, etc. It hasn't been water damaged, so that cant be the problem.

When I come from outside and press the home button to turn my iPod on, there is white, light blue and red lines but it is transparent enough that I can see my background, time, etc. It hasn't been water damaged, so that can't be the problem. I was thinking maybe it is just because of the cold but, I don't like having my iPod doing that whenever I come back from the cold. However, I was in class too and this problem happened but it was inside! So I am very worried, I have dropped my ipod a few times but it hasn't fallen that hard to effect it.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

BH-503 keeps on flashing blue and red when playing

my bh-503 keeps on flashing blue and red when playing,was thinking that maybe it weren't fully charged, but tried playing it when charging it does the same.i think the charging is okay because the red turns into blue after an hour or so,is everything normal?
Moderator's note: The subject was amended as the post was moved to a more appropriate board.

When the headset is connected with your mobile phone and ready for use, the indicator light of the headset slowly flashes blue.The indicator light is red while charging and when the battery is fully charged, the indicator light turns green.
User Guide may be found here:
http://nds1.nokia.com/files/support/apac/phones/guides/Nokia_BH-503_apac_ug_en.pdf
Happy to have helped forum in a small way with a Support Ratio = 37.0

Blue and red are reversed on external monitor in ppt presentation mode only

Hi all,
I have a mid-2012 macbook pro and I'm running OS X 10.9.5 Sorry but the problem's a bit complicated so the description is a bit long.
After I upgraded to maverick I started having a problem at work. I am a university professor who uses my laptop to project ppt lectures onto an external monitor. I have never had a problem with it. I am not sure that the problem is related to maverick but it was around that time that it began to occur.
The problem is when I project my display onto the screen before I switch into the presentation mode all the colors on the external monitor are fine, when I switch to the presentation mode on ppt (14.4.5) reds are blues and blues are reds (for most but not all, weird enough) on the external monitor, and blue strawberries are really unappealing. It is not limited to one projector on campus, I've bothered our IT guys to death about it and they've checked the monitors (not the monitors) and they worked trying to fix my problem but they are flummoxed, I've called microsoft about it and stumped them (they refunded my service fee because they couldn't solve the problem). My IT guys did find one work around where I changed the settings for displays in ppt from presenter view to mirror show and that worked but it created other problems in that I couldn't advance my slides easily (for each and every slide advance, I had to "pretend" to "end show" after I'd advanced and then it would advance...) so that's not a viable option either. I opened the ppt presentation in keynote and still get the same color reversal happening. This leads me to think that it may be a maverick problem? But I don't know. Now my semester is gearing up and I'd love for the lovely Apple community experts to chime in and give ideas on how to solve this conundrum! I'd be so very grateful!
Laura

Either an update to 10.7.4 or a restart with the computer closed the entire time seems to have solved the problem. Not sure which.

CS3 exporting drop outs and red screen flashes when exporting via Media Encoder

Hi forum
I have been using Premiere Pro CS3 for a long time on my dual core PC with no issues. Suddenly, I am now getting a major issue i MUST get sorted asap for a client is waiting for the final video.
It is a HDV (1080i, 25fps) project/timeline. An 8 minute video has been put together in this and every time I try to export as either MPEG2 (Blu Ray) or WMV, I am getting pixelation in certain places usually around certain cuts, or horrible red blocky pixels filling up the screen for a second or two. They seem to come always at the same point. They don't happen when i render the timeline or show up when playing the edit itself in the timeline - just when i playback the exported video in premiere or in Windows Media Player.
To try a workaround I exported the whole video as high quality MPEG2 (blu ray - 30mbps), which I brought into a new sequence, then I exported small sections where this problem was happening as Uncompressed Microsoft AVI and called them "patch 1", "patch 2" etc. and brought them back in and overlayed over where the problems were occuring. The short Uncompressed AVI patches seem to have exported with no glitches, so theoretically I thought I had a clean good timeline in my new sequence made up of the MPEG 2 video overlayed in the dodgy places with uncompressed AVI "patches". However, trying to export a new MPEG 2 master from this has created the same problems, in the same places!!! Still drop outs and still those horrid red flashes filling the screen. Not always as bad, and some places where there were problems are ok, but I am still left with most of the problems still there.
I am now trying to export the whole video as an AVI uncompessed but dont know if this will work and will take a very long time.
I do have Saphire plugins, but they are not being used in this new sequence so therefore could that be a possible problem? I thought perhaps it was the brightness/contrast filter etc so removed that from some of the problem areas, and it helped on some of them, but not on others, so not sure its anything to do with my plug in or filters.
Any help would be greatly appreciated.
thanks, James

This topic is about a year old, but I thought I would reply because I just experienced this problem very recently and stumbled upon an easy solution.
Problem: When using Adobe Media Encoder to create an HD or .m2v video file, a bright red screen will flash followed by a mashup of red blocks/pixels somewhere within the file you've just encoded. This phenomenon lasts for exactly 10 frames before clearing up. Most likely, you won't see this problem until you import the encoded file into Adobe Encore. It shows up on the timeline, the preview monitor and the DVD itself. It occurs on edits that the system reads as being corrupt or when a flash bulb goes off from a still camera. Both instances make the encoding process go haywire.
Solution: Encode your HD or .m2v file with CBR (1-pass) bitrate encoding rather than VBR (2-pass). Don't worry about losing any quality in your video or creating unnecessarily large file sizes with your new renders. I guarantee you won't see much of a difference, if any. I can't explain why this solution works. It just does.
Hope this helps you as much as it did me.

HT201263 Blue and green screen

My iPad won't turn on. Held both buttons and got a blue and green lined screen. Help???

You have to hold the sleep and home buttons down at the same time for at least 10-15 seconds and the key is to wait until the Apple logo appears on the screen before you let go of the buttons. It can take even longer than 15 seconds.
But the fact that you are seeing this funky screen makes it seem like it could be a hardware problem. Anyway, you still have to go through the troubleshooting steps and see if anything will help restore the iPad to working order.
Start here. Read any and all of the links that are in the kb article as well.
iOS: Not responding or does not turn on - Apple Support

Got blue and red screen error

Similar Messages

Maybe you are looking for