Got "closed connection" via OEM 10.1.0.2.0

Hello,
please help.....
I installed OEM version 10.1.0.2.0 on windows 2000 PC. All the database instances are displayed under Network Navigator. when i log on to the database either as normal / sysoper /sysdba, I got "closed connection" error right after clicked OK on the login window.
can anyone give me suggestion/ references to this issue?
many thanks.

Check firewall configurations on the PC to see if it is blocking the Listener port 1521. Also check the setting of SQLNET.AUTHENTICATION_SERVICES = in $ORAACLE_HOME/network/admin/sqlnet.ora

Similar Messages

Had "closed connection" when connect via enterprise manager

Hello,
please help.....
I installed OEM version 10.1.0.2.0 on windows 2000 PC. All the database instances are displayed under Network Navigator. when i log on to the database either as normal / sysoper /sysdba, I got "closed connection" error right after clicked OK on the login window.
can anyone give me suggestion/ references to this issue?
many thanks.

Have you already checked the windows firewall? If working, it prevents connections to Oracle from outside the box.

Hello. i have a 2011 iMac G4 with OSX10.9.2 and I can't find AirPlay . is it on this version of iMac? i just got a new soundsystem expecting to connect via AirPlay

hello. i have a 2011 iMac G4 with OSX10.9.2 and I can't find AirPlay . is it on this version of iMac? i just got a new soundsystem expecting to connect via AirPlay but don't know where to find it....?

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
iTunes- Troubleshooting AirPlay and AirPlay Mirroring
iTunes- Using AirPlay
Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Other solutions are the Air Parrot, StreamToMe, and AirServer.

I just got one of the new iMac. following the on screen instructions to do migration assist. I guess it connected via wifi to my old iMac. now it seems to have stopped. what can I do to not mess it all up? how long will it take on wifi?

I just got a new iMac. was following the onscreen instructions to do migration assistance and I guess it connected to my old iMac via wi fi. It never instructed me to connect via firewire. Now it seems to have stopped. what can I do that won't completely mess it up? how Long will it take to do over wi fi?

Your new iMac does not have a Firewire port so you ned this adapter:
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
to connect the two machines together and migrate simply follow the instructions in:
http://support.apple.com/kb/HT4413?viewlocale=en_US&locale=en_US#1

OEM- Closed Connection

Hi,
After installing the Oracle 10g Developer suite,I am un able to login in my 9i databse through OEM .
when i login ,oem says closed connection .
Please let me know .
Cheers

Check firewall configurations on the PC to see if it is blocking the Listener port 1521. Also check the setting of SQLNET.AUTHENTICATION_SERVICES = in $ORAACLE_HOME/network/admin/sqlnet.ora

Lost my adsl connection via Airport Extreme?

Hi
Been running my adsl connection via winXP SP1 laptop thru AE (also iBook /Imac FP} with no problems - now whilst i was trying to access files on the win machine (using iFelix guide) i seem to have messed up!!!
I have the 'Wireless Network Connection' icon in the system tray showing my network and 'excellent' signal - as previous.
When i try to get on the net the 'dial-up' box keeps coming up trying to dial my previous dial-up account - i believe i hace altered something here!!!
When i click on 'status' in the sys tray icon - 'general' shows - connected but 'support' does not show address type / IP address etc all show "unavailable" - 'Repair' is greyed out.
When I 'View available networks" i get the 'connect to wireless network' box my network is shown as available and requests my wep ket to connect!!!
'Advanced' shows my network in both the available and preferred boxes - opening preferences shows wep enabled and my network key already entered!!!
I've now deleted the old dial-up settings so there is nothing showing in the dial window.
Any ideas please - i need to get this win machine operational before my partner returns - and then persuade him to get a mac!!!
thanks
ianjh
norfolk
uk

It's possible that the message you got was to update the AirPort Express Base Station's (AX) firmware...and that something might have gone wrong during the upgrade.
Let's start by performing a "factory default" reset on the AX to get it back to it's original "out-of-the-box" condition.
Then, let's set it up to work with your cable modem...
AirPort Express Base Station Setup (AX) w/High-Speed Cable Modem
Modem/Router Power ReCycling (optional)
- Power-off the Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AX; Wait at least 5 minutes.
- Power-on the computer(s)
Setup the AX
With the network components powered down, set up the AX, using the AirPort Admin Utility, either connect to the AX's wireless network or connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- AirPort Network Name: <whatever you wish or use the default>
- Create a closed network (unchecked)
- Wireless Security: Not enabled
- Channel: Automatic
- Mode: 802.11b/g Compatible
Internet tab
- Connect Using: Ethernet
- Configure: Using DHCP
- WAN Ethernet Port: Automatic
Network tab
- Distribute IP addresses (checked)
- Share a single IP address (using DHCP & NAT) (enabled)
Do not, at this point, set up any security (i.e., WEP/WPA encryption, closed network, etc.) to first make sure the AX is operating properly. Try to access the Internet wirelessly with your MacBook. If you're successful, go ahead and add any security features you wish.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either. I get an error message with multiple suggestions but none of them apply to my situation.
I am so dissatisfied with this printer. I'm sorry I got it from Amazon because now it is a hassle to return it. I will never buy another Canon.
The printer menus are confusing. I hate using it. I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model. Never again. Stick with cameras.
Marcy Hotz

This note won't be as angry and frustrated as the last one...
Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer. I deleted all the old stuff.
I also had several scanning applications on my drive which just confused me.
When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which). So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
It works now. So I'm satisfied, will keep this maching. I just had to take some time, sit down and focus on the problem.

TS2756 I can no longer connect via USB/service missing

..& my iPhone does not show up on the list anymore. I can still use Wi-Fi, though. I would like to be able to use the USB connection again. Resetting the network settings doesn't help. BTW, I'm using it with my MacBook Pro running 10.7.5 and my iPhone has the latest iOS update as well.
When I first got the phone, I always used my internet connection via USB, but then it started giving me trouble. I tried all kinds of suggestions that I found here and it was a real crap shoot -- sometimes it worked, and sometimes not. Now it just won't work at all. I recently deleted my iPhone from the list of services thinking that the next time I plugged it in, it would recreated the service. It did not. So, I'm still using it as before: just connecting over Wi-Fi (the network is still available, it just doesn't show up in my list of services on the left-hand column under "network").
Anyone have any suggestions that they know will fix this?

Hi DaveX83 and welcome to the discussions.
A few things to try.
Press the reset button once on the back of your Extreme and let it restart. Check for proper operation.
If no help there, keep the ethernet cable connected, and open Airport Utility. Click on Manual Setup near the bottom of the pane. On the next screen click the Airport icon at the upper left of the pane, then click Wireless in the line just below that reads Summary - Time Capsule - Wireless - Access.
Check to see that your wireless is set up, security set up, passwords, etc. You may need to reconfigure your wireless settings again and update the Extreme to store them and restart.
Hope this helps.

I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean. When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right h

I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I was using a ps3 controller connected via usb as a gamepad when I had Snow Leopard installed - the other day I downloaded Mavericks and now it no longer works. Solutions?

I moved from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Apple support won't help because it's not their hardware. It's not a playstation controller, it's Spartan brand, and it never connected via bluetooth (it continues to not connect via bluetooth in Mavericks which is fine). I always just plugged it in and it ran because apparently Apple included drivers for it from Snow Leopard onward. However, in Mavericks that's not the case, as when I plug it in nothing picks it up, and when I tried to connect it via bluetooth I would enter the pairing code and then it wouldn't pair. Anyone got any thoughts/ideas?

Thanks for no help. Such a supportive community. I figured it out on my own. I can only connect it via usb cable (which I'm happy with) and in order to do that I had to go through the bluetooth connection steps for some reason. It doesn't show up as paired but I did the steps outlined in this video - http://www.youtube.com/watch?v=Efk77f6d98Y -, plugged the controller in via usb cable and then it worked.

D-Link wireless + Cable Internet:: can't connect via AirPort

Just got my service changed from DSL to Cable and can't connect via wireless (but can with an Ethernet cable). Have tried the Wi Router settings to no avail. Any ideas? I think I might not be doing some setting in the comp correctly. Please help. Router is D-Link DIR-625.

Did you open Airport and see if you see the wireless router? If you can see it, you can select it and then make sure it is set up properly in networks in the system prefs.

Airport extreme won't connect via Ethernet to BT homeHub v2.0

Hi
here's what I want to do:
1. Homehub is connected to the phoneline and will provide a b/g network for my iphone/xbox/laptop1
2. I want to connect my airport extreme to this (from what I can tell this must be done through an ethernet cable) so that I can have a separate N network which only 1 laptop will connect to.
So the problem I have is that no matter what options I select in the airport extreme when it's connected via ethernet it tells me that nothing is connected to the Ethernet WAN port. I've tried two different cables different ports on the back of the hub etc. nothing works. Every time I search google or forums for an answer people just write "connected it via ethernet and it works great" but there's no guide to what settings to use that I can see.
Can someone please help me with some sort of noob guide to get this setup how I've stated?
Many thanks in advance

Hey Bob
thanks fro the quick response. I have actually tried exactly that but it still flashes orange at me I'm suspicious that the AE may have a fault because during the setup (i can't remember the exact steps) but I got the AE updated and it complained that it could read from the AE (error code was 10057). Googling this does thow up a couple of solutions which I haven't tried.
so my steps should be:
Factory Reset the AE
setup as join existing network
join via ethernet to create a 2nd network
connect up the cable to the WAN port and the Lan of the Hub
change to bridge mode.
One thing I did notice (which may or may not be related) is the subnet mask on the AE says 255.255.0.0 when I set it up like this. However when I make it just join the network without trying to create a new one (which works) it sets it to 255.255.255.0 . the IP address also begins 192.168.1.* whereas in the other setup mode it is something different. Does that matter at all?
Thanks
Alan

Can't connect via Airport Utility

Just noticed that my shared USB drive wasn't connecting so I opened Airport Utility and got this message when trying to manually access my Airport Extreme:
Make sure your AirPort wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)
Even after restarting the base station and my Mac Pro I receive that error. I am connected to it via ethernet. Thoughts or suggestions would be appreciated.

A full manual factory reset did the trick, yes.
I followed Bob's instructions (apologies for calling you Bill - don't know where that came from! )
Pull the power plug on the Extreme
Wait a moment
Hold in the reset button and keep holding it in while you plug the power back in
Release the reset button after 10 seconds of plugging the power back in

Connect via SQL*Plus taking more time in Oracle 11 than in 10

Oracle Version
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Productioncurrently migrating from
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - ProductionOS is AIX 5.3 for Oracle 10 and AIX 6.1 for Oracle 11.
We are currently in the process of migrating some applications from Oracle 10 to 11. Our admins have setup a new development system for us with an Oracle 11 instance. Regarding performance the new system behaves more or less the same than our old, e.g. when executing SQLs we notice hardly any performance differences and those we find are slightly in favour of the new system.
But now we discovered that the time it takes to establish a database connection via SQL*Plus is longer on the Oracle 11 system. Running the following code
sqlplus -s user/pw@database <<END
quit
ENDa thousand times takes ~60s under Oracle 10 but ~140s under Oracle 11. This may not seem much but we are running a test framework consisting of a bunch of shell scripts where several thousand connections are openend via SQL*Plus to execute some SQLs, so that even this small time difference results in rather huge difference in total runtime. The SQLs themself require roughly the same time in both databases, as already mentioned above they are in fact slightly faster in Oracle 11.
To analyze the time difference I ran a trace for the connect with the following parameters in sqlnet.ora
TRACE_LEVEL_CLIENT=4
TRACE_UNIQUE_CLIENT=ONand found out that there is a time difference of about 70ms during the connect handshake:
Oracle 10
[22-MAR-2013 12:13:09:595] nscon: doing connect handshake...
[22-MAR-2013 12:13:09:595] nscon: sending NSPTCN packet
[22-MAR-2013 12:13:09:621] nscon: got NSPTRS packet
[22-MAR-2013 12:13:09:621] nscon: sending NSPTCN packetOracle 11
(1) [22-MAR-2013 12:15:26:812] nscon: doing connect handshake...
(1) [22-MAR-2013 12:15:26:812] nscon: sending NSPTCN packet
(1) [22-MAR-2013 12:15:26:906] nscon: got NSPTRS packet
(1) [22-MAR-2013 12:15:26:906] nscon: sending NSPTCN packetUnder Oracle 10 there are 26ms between sending the NSPTCN packet and getting the NSPTRS packet, whereas under Oracle 11 this takes 94ms. I ran the trace again, this time with
TRACE_LEVEL_CLIENT=16and got the following results for the critical interval:
Oracle 10:
[22-MAR-2013 13:17:37:638] nscon: sending NSPTCN packet
[22-MAR-2013 13:17:37:638] nspsend: entry
[22-MAR-2013 13:17:37:638] nspsend: plen=218, type=1
[22-MAR-2013 13:17:37:638] nttwr: entry
[22-MAR-2013 13:17:37:638] nttwr: socket 9 had bytes written=218
[22-MAR-2013 13:17:37:638] nttwr: exit
[22-MAR-2013 13:17:37:638] nspsend: packet dump
<<packet dump removed>>
[22-MAR-2013 13:17:37:638] nspsend: 218 bytes to transport
[22-MAR-2013 13:17:37:638] nspsend: normal exit
[22-MAR-2013 13:17:37:638] nscon: exit (0)
[22-MAR-2013 13:17:37:638] nsdo: nsctxrnk=0
[22-MAR-2013 13:17:37:638] nsdo: normal exit
[22-MAR-2013 13:17:37:638] nsdo: entry
[22-MAR-2013 13:17:37:638] nsdo: cid=0, opcode=68, *bl=512, *what=9, uflgs=0x0, cflgs=0x3
[22-MAR-2013 13:17:37:638] nsdo: rank=64, nsctxrnk=0
[22-MAR-2013 13:17:37:638] nsdo: nsctx: state=2, flg=0x4005, mvd=0
[22-MAR-2013 13:17:37:638] nsdo: gtn=10, gtc=10, ptn=10, ptc=2011
[22-MAR-2013 13:17:37:638] nscon: entry
[22-MAR-2013 13:17:37:638] nscon: recving a packet
[22-MAR-2013 13:17:37:638] nsprecv: entry
[22-MAR-2013 13:17:37:638] nsprecv: reading from transport...
[22-MAR-2013 13:17:37:638] nttrd: entry
[22-MAR-2013 13:17:37:665] nttrd: socket 9 had bytes read=8
[22-MAR-2013 13:17:37:665] nttrd: exit
[22-MAR-2013 13:17:37:665] nsprecv: 8 bytes from transport
[22-MAR-2013 13:17:37:665] nsprecv: tlen=8, plen=8, type=11
[22-MAR-2013 13:17:37:665] nsprecv: packet dump
[22-MAR-2013 13:17:37:665] nsprecv: 00 08 00 00 0B 00 00 00 |........|
[22-MAR-2013 13:17:37:665] nsprecv: normal exit
[22-MAR-2013 13:17:37:665] nscon: got NSPTRS packetOracle 11
(1) [22-MAR-2013 13:33:40:504] nscon: sending NSPTCN packet
(1) [22-MAR-2013 13:33:40:504] nspsend: entry
(1) [22-MAR-2013 13:33:40:504] nspsend: plen=205, type=1
(1) [22-MAR-2013 13:33:40:504] nttwr: entry
(1) [22-MAR-2013 13:33:40:504] nttwr: socket 8 had bytes written=205
(1) [22-MAR-2013 13:33:40:504] nttwr: exit
(1) [22-MAR-2013 13:33:40:504] nspsend: packet dump
<<packet dump removed>>
(1) [22-MAR-2013 13:33:40:505] nspsend: 205 bytes to transport
(1) [22-MAR-2013 13:33:40:505] nspsend: normal exit
(1) [22-MAR-2013 13:33:40:505] nscon: exit (0)
(1) [22-MAR-2013 13:33:40:505] snsbitts_ts: entry
(1) [22-MAR-2013 13:33:40:505] snsbitts_ts: acquired the bit
(1) [22-MAR-2013 13:33:40:505] snsbitts_ts: normal exit
(1) [22-MAR-2013 13:33:40:505] nsdo: nsctxrnk=0
(1) [22-MAR-2013 13:33:40:505] snsbitcl_ts: entry
(1) [22-MAR-2013 13:33:40:505] snsbitcl_ts: normal exit
(1) [22-MAR-2013 13:33:40:505] nsdo: normal exit
(1) [22-MAR-2013 13:33:40:505] nsdo: entry
(1) [22-MAR-2013 13:33:40:505] nsdo: cid=0, opcode=68, *bl=2048, *what=9, uflgs=0x0, cflgs=0x3
(1) [22-MAR-2013 13:33:40:505] snsbitts_ts: entry
(1) [22-MAR-2013 13:33:40:505] snsbitts_ts: acquired the bit
(1) [22-MAR-2013 13:33:40:505] snsbitts_ts: normal exit
(1) [22-MAR-2013 13:33:40:505] nsdo: rank=64, nsctxrnk=0
(1) [22-MAR-2013 13:33:40:505] snsbitcl_ts: entry
(1) [22-MAR-2013 13:33:40:505] snsbitcl_ts: normal exit
(1) [22-MAR-2013 13:33:40:505] nsdo: nsctx: state=2, flg=0x4005, mvd=0
(1) [22-MAR-2013 13:33:40:505] nsdo: gtn=10, gtc=10, ptn=10, ptc=8155
(1) [22-MAR-2013 13:33:40:505] nscon: entry
(1) [22-MAR-2013 13:33:40:505] nscon: recving a packet
(1) [22-MAR-2013 13:33:40:505] nsprecv: entry
(1) [22-MAR-2013 13:33:40:505] nsprecv: reading from transport...
(1) [22-MAR-2013 13:33:40:505] nttrd: entry
(1) [22-MAR-2013 13:33:40:618] nttrd: socket 8 had bytes read=8
(1) [22-MAR-2013 13:33:40:618] nttrd: exit
(1) [22-MAR-2013 13:33:40:618] nsprecv: 8 bytes from transport
(1) [22-MAR-2013 13:33:40:618] nsprecv: tlen=8, plen=8, type=11
(1) [22-MAR-2013 13:33:40:618] nsprecv: packet dump
(1) [22-MAR-2013 13:33:40:618] nsprecv: 00 08 00 00 0B 00 00 00 |........|
(1) [22-MAR-2013 13:33:40:618] nsprecv: normal exit
(1) [22-MAR-2013 13:33:40:618] nscon: got NSPTRS packetAny ideas what could be the reason for this time difference? Something in our network configuration or something else?

With local connections - I do not think a TCP packet send from an IP to the same IP, leaves the interface as an actual wire protocol/signal. If I'm correct, then running local connection tests will be mostly useless in checking the actual network infrastructure.
Tests 3 and 4 should be showing the same connection times as the same physical network infrastructure is used - only the direction is reversed in the tests.
I would assume that port settings on the switches and interface settings on the routers treat packets equally in both directions between 2 servers. But this could in part explain the problem if this is not the case. In a case of a router for example, the 1st test's ingress interface is the egress interface of the 2nd test (and vice versa). Configurations can differ substantially between interfaces on the same router. Likewise if there is a firewall - as different rule sets are applied in each test and these rule sets could differ.
So I would not be too quick to state that this is definitely not a network problem. But I agree that based on the small percentage difference (assuming comparable tests), it does not look like a network issue.
The next step is to determine what the delay is between the listener accepting the client connection, and the connection being serviced by a dedicated server process.
This will require listener tracing - tracing the time from when the listener accepted the connection (and parsed the TNS connection string), to handing off the connection to the dedicated server process.
As a comparison test, you can also test shared server connections. Dispatcher processes (of the db instance) register themselves with the listener. The shared server client hand off is thus done to an existing server process - no need for the Listener to make a kernel call to load and initialise an executable image.
Shared connections are typically faster than dedicated connections in this respect.
If there is a major time difference, then it means some kind of issue with the listener dealing with dedicated servers as oppose to dispatcher hand off's. As both connections would have had very similar network transit time - which means the connection time difference is related directly to dealing with a dedicated server connection request and hand off.
You can also substitute the oracle executable with a wrapper - and troubleshoot the actual dedicated server startup. I've only done this with Oracle XE 10.2 though and with local IPC connections. Unsure how robust this will be for testing purposes via TCP using 11g.

Install Arch on hard disk connected via USB

Hi,
anyone tried this?
I had Arch Linux installed on hdd in my desktop, now I've connected this hdd to laptop via USB and I want to start system from it. I need to reinstall lilo, because I get kernel panic after booting from USB.
I don't know how to do this, I boot laptop from Archie Live CD and:
mount /dev/sda2 /mnt/m
chroot /mnt/m
editing /etc/lilo.conf
lilo
and I get error: Failed stat("/dev/dsa2")
Anyone know how to install lilo on hdd connected via USB?
thanks for any help

i know it's an old thread, but perhaps it'll help someone else later...
i first tried installing from cd, with some problems, using an arch 0.7 cd.
then i tried it with a newer one (arch 0.7.1) which did'nt recognize the external harddisk and my network device...
so i tried a ftp install from 0.7 cd - without problems.
then after trying to boot i got also this kernel panic, because the usb drive wasn't accessible like this.
with following steps i got it running:
boot from live cd (e.g. archie)
create a folder in /mnt/
mount usb drives partition with the installation there
chroot to mounted folder
edit /etc/mkinitrd.conf
configure it (usb,scsi,ide), there are useful comments in the file...
save it and run mkinitrd -auto
then edit and save /etc/lilo.conf as described in the wiki: http://wiki.archlinux.org/index.php/Initrd
installing lilo from the chrooted system doesn't work. so do this:
type exit (to leave chroot)
cd /
mv /etc/ /etcold/
mv /boot/ /bootold/
ln -s /mnt/yourmountfolder/boot
ln -s /mnt/yourmountfolder/etc
lilo
(if there's an other, easyer way to install lilo, let me know)
and then reboot...

Got "closed connection" via OEM 10.1.0.2.0

Similar Messages

Maybe you are looking for