Got dump ITS_TEMPLATE_NOT_FOUND

Hi,
Info on ITS_TEMPLATE_NOT_FOUND.
Short text : Template interpretation failed. Template does not exist.
What happened? :
The ITS service "bbp_poc" failed since not template could be found for
the screen with the number 100 in the program "SAPLWDTM".
The template was searched in the following ITS services:
"bbp_poc"
Note that for language-dependent templates the language is included
in the search.
What can you do?
Call transaction SE80 and choose the Internet service "bbp_poc". Check
if the template exists.
If the template exists in the service, publish the entire service
to the SITE INTERNAL.
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis:
As a test, you can set the service parameter ~generateDynpro = 1. The
system then generates the HTML page for this service without a template.
You can then at least see which screen was sent by the WebAs. Make sure
to reset the parameter to its original value.
Information on where terminated
Termination occurred in the ABAP program "SAPLWDTM" - in "SYSTEM-EXIT".
The main program was "SAPLBBP_PO_UI_ITS ".
In the source code you have the termination point in line 0
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 3
SY-TABIX 8
SY-DBCNT 6
SY-FDPOS 40
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY TABCMOD
SY-UCOMM REFRESH
SY-TITLE MCX_DUMMY_POPUP
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20100628
Active Calls/Events
No. Ty. Program Include Line
Name
11 EVENT SAPLWDTM ??? 0
SYSTEM-EXIT
10 FUNCTION SAPLWDTM LWDTMU20 154
TABCONTROL_SH_START
9 FORM SAPLSDSD LSDSDF10 131
F4PROZ_OCX_CALL
8 FORM SAPLSDSD LSDSDF05 740
F4PROZ_STEP_PRESEL
7 FUNCTION SAPLSDSD LSDSDU14 80
DD_SHLP_SINGLE_STEP
6 FORM SAPLSDSD LSDSDF05 151
F4PROZ_LOOP
5 FORM SAPLSDSD LSDSDF05 55
F4PROZ
4 FUNCTION SAPLSDHI LSDHIU12 300
F4IF_FIELD_VALUE_REQUEST
3 FORM SAPLBBP_PO_UI_ITS LBBP_PO_UI_ITSF1K 36
F4_SEARCH_CATEGORY_LIST
2 MODULE (PAI) SAPLBBP_PO_UI_ITS LBBP_PO_UI_ITSI0M 5
F4_SEARCH_CATEGORY_LIST
1 EVENT SAPLBBP_PO_UI_ITS ??? 0
SYSTEM-EXIT
SY-UZEIT 134402
SY-XPROG SAPMSSY1
SY-XFORM XAB_READ
of the (Include) program " ".
Thanks and Regards,
Shiva

Hi Matthew,
Thanks for the reply.
Active Calls/Events
No.   Ty.          Program                             Include                             Line
      Name
   12 EVENT        SAPLWDTM                            ???                                     0
      SYSTEM-EXIT
   11 FUNCTION     SAPLWDTM                            LWDTMU20                              154
      TABCONTROL_SH_START
   10 FORM         SAPLSDSD                                LSDSDF10                              131
      F4PROZ_OCX_CALL
    9 FORM         SAPLSDSD                                 LSDSDF05                              740
      F4PROZ_STEP_PRESEL
    8 FUNCTION     SAPLSDSD                              LSDSDU14                               80
      DD_SHLP_SINGLE_STEP
    7 FORM         SAPLSDSD                                 LSDSDF05                              151
      F4PROZ_LOOP
    6 FORM         SAPLSDSD                                 LSDSDF05                               55
      F4PROZ
    5 FUNCTION     SAPLSDHI                                          LSDHIU12                              300
      F4IF_FIELD_VALUE_REQUEST
    4 FUNCTION     SAPLBBP_PDH_PARTNER                 LBBP_PDH_PARTNERU01                   115
      BBP_PDH_PARTNER_SEARCH_HELP
    3 FORM         SAPLBBP_PDH_PARTNER                    LBBP_PDH_PARTNERF16                    22
      F4_SEARCH_PARTNER
    2 MODULE (PAI) SAPLBBP_PDH_PARTNER                 LBBP_PDH_PARTNERI05                     6
      F4_SEARCH_PARTNER
    1 EVENT        SAPLBBP_PO_UI_ITS                   ???                                     0
      SYSTEM-EXIT
These are active calls before termination of program.
I dont know how they got dump.
Thanks and Regards,
Shiva

Similar Messages

  • Infuriating 'Adobe InDesign CC 2014 has stopped working error' has lost me a day. Just got dumped by chat support...

    Hi All,
    I've taken a few deep breaths before writing this to try and avoid a hugely frustrated rant.
    To summarise; since early this morning my previously healthy version of InDesign CC 2014 has been unable to open, crashing at the 'Executing startup services...' stage with the error message 'Adobe InDesign CC 2014 has stopped working'. I worked on it all day yesterday and use it extensively every day more or less, this problem came out of nowhere overnight. I didn't do any kind of system update in the interim period. I'm using a HP Envy dv7 Notebook PC running Windows 8.
    I tried as much as I could based on my own very limited knowledge and some forum searching. I re-installed the software. Did that again using the Adobe CC cleaner .exe file in between un-install and re-install. I uninstalled older versions of the software (which all worked fine - as does the rest of the Creative Suite software I have installed. I deleted extensions. None of this helped.
    I then went looking for Adobe support and got a guy via Adobe's chat controlling my PC from afar and trying some much deeper technical stuff. After two hours he said that it was an OS issue, sorry... after a bit of dismayed pleading he said OK, I'll try one more thing and made me a new user with administration power, told me to login in to that account and try again. I did, it worked! But it's still broken on my main account and he disconnected in the few minutes I was gone and I now seem to be frozen out of chat help. HELP!
    What does this mean? All CS/CC software seems to be working fine on my normal account apart from InDesign CC 2014. I have a huge file, now very close to being overdue, which I was working on in 2014 CC and can't be opened by older versions. The software works on this other account - so I guess I can work there short term. But how do I get it fixed on my main account?
    Hopefully someone out there has the answer?
    Thanks!
    Luke

    First, see Replace Your Preferences and do it for the original account.
    If that fails to solve the problem, rename the two Adobe folders that contain the prefs in the user profile for that account and copy the folders from the new account where it works. You want to be sure you copy the folders, rather than merge the contents, so you must rename the old folders first.

  • Activating data in DSO got dump SAPSQL_EMPTY_TABNAME after BW system copy

    Hi all,
    We had an issue after system copy.
    After a system copy the data in the standard DSOs(all of them) cannot be activated. The DOSs themselves are active, the transformations are active but if one attempts to load data and activate u2013 it does not work. The job terminates with shortdump SAPSQL_EMPTY_TABNAME.
    Found the issue is caused by u201Cmore than one versionu201D of the change log.
    We tried the Program RSAR_RSTSODS_CHANGELOG_VRS but it didn't work.
    We had the solution like this:
    After activating the DSO itself(the object) using RSDG_ODSO_ACTIVATE the issue disappears and the data can be activated. Issue also disappears. BUT Drawback: Activating the DSO causes the transformations to deactivate.Then we used the program RSDG_TRFN_ACTIVATE to activate all transformations. And then the issue disappeared.
    Want to know what the root cause for this. From some SDN threads, mentioned BDLS job in the post refresh steps are not correctly done during system copy may cause this issue. How did the BDLS run wrongly cause this issue? And what is the exact correct way? We ran BDLS for each source systems inlcuding the target refreshed BW system itself by the default selection - conversion of Client-Dependent and Client-Independent Tables; because we used database copy
    for the system refresh.
    We also restored all source systems in RSA1 inlcuding the refreshed BW system own in the post-refresh steps.
    Thank you very much for your information and suggestion.
    Heming

    Hi Arun, as you say two change log tables it´s strange. In fact in my opinion it´s not right but the problem is that the second change log table appears after executing std SAP report RSDG_ODSO_ACTIVATE in order to be able to activate the DSO. So the solution provided by SAP it works but i´m not sure if the right one. Besides this the original change log table is full of data while the second one is empty... for new loads which are gonna a be filled  by the activation process ? I suppose the second one... will this have some impact with the data stored in the first one... not in theory but.... i do not feel confortable with the consequences of this report.
    And the most important, it seems that the reason why the DSO and the change log table had problems is due to a some problems or missing steps after executing the BDLS after BW system refresh but nobody can confirm this point...
    So, i´ve been able to solve the issue but now i have two change log tables for the same DSO.
    Anybody has the same situation after executing the above mentioned SAP std report ?
    Regards,
    Joaquin Casas Baca-Castex

  • HT5824 just bought a  iphone4s, moved the sim card out of my old iphone4 to the new phone. Everthing was fine for 2 days. Now a lot of contacts got dumped/ 2 pages in notes, and most of my appointments, past and future. I back up to the cloud about 2/3 x

    bought an iphone4s. moved the sim card from my iphone4. did a sync on my computer, and all of my apps showed up. Calendar good, notes all there....Two days later, I lost most of my contacts, 75% of my appointments, events are gone, both past and future.. Two pages of notes are gone. Really important info. I have synced, synced again,backed up to the cloud, to my computer, shut it down, etc. Nothing has worked! Any ideas?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Error ITS_TEMPLATE_NOT_FOUND when calling a function code from the web

    Hi Experts,
    I have craeted a simple module pool program and a service for the same in SICF. The module pool has only one screen where I am giving the input to the two fieds
    1. year  2. category. when I click on FIND button the result will appear on the same screen. The result will be the winner and the nominees for that year. The program is running perfect when I execute the transaction in R/3.
    The coding in the PAI of the module pool is as follows:
    *& Module Pool       ZYMOVIE1
    INCLUDE ZYMOVIE1TOP                             .    " global Data
    INCLUDE ZYMOVIE1O01                             .  " PBO-Modules
    INCLUDE ZYMOVIE1I01                             .  " PAI-Modules
    INCLUDE ZYMOVIE1F01                             .  " FORM-Routines
    tables : ymovie.
    DATA:     OKCODE like sy-ucomm.
    tables: ztext.
    *&      Module  GET_RECORD  INPUT
          text
    MODULE GET_RECORD INPUT.
    case okcode.
    when 'FIND'.
    SELECT SINGLE * FROM YMOVIE
                   WHERE YYEAR      = YMOVIE-YYEAR
                         AND CATEGORY     = YMOVIE-CATEGORY.
    endcase.
    ENDMODULE.                 " GET_RECORD  INPUT
    I have created a Internet service ZYMOVIE1 ans created a template for screen 9000
    The HTML code is as follows:
    `include(~service="bbpglobal", ~name="bbpfunctions.html")`
    <html>
      <head>
    <title>`~windowtitle`</title>
      </head>
      <body>
    `~messageline`
    <form name="formFind" action=&#8221;`wgateUrl()`&#8221; method="POST">
       year : <input type = "text" name = "`YMOVIE-YYEAR`"/>
       category : <input type = "text" name = "`YMOVIE-CATEGORY`"/>
    <INPUT TYPE="hidden" name="~okcode" value="FIND">
    <INPUT TYPE="submit" name="btnSubmit" value="FIND">
    <input type = "text" name = "YMOVIE-WINNER" value= "`YMOVIE-WINNER`" size = "`YMOVIE-WINNER.maxsize`"/>
    <input type = "text" name = "YMOVIE-NOMINEE1" value= "`YMOVIE-NOMINEE1`" size = "`YMOVIE-NOMINEE1.maxsize`"/>
    <input type = "text" name = "YMOVIE-NOMINEE2" value= "`YMOVIE-NOMINEE2`" size = "`YMOVIE-NOMINEE2.maxsize`"/>
    <input type = "text" name = "YMOVIE-NOMINEE3" value= "`YMOVIE-NOMINEE3`" size = "`YMOVIE-NOMINEE3.maxsize`"/>
    </form>
      </body>
    </html>
    when i click on the FIND button in the web I am getting a dump "ITS_TEMPLATE_NOT_FOUND".
    Please suggest me where I am doing wrong. Also is there any way i can add attachemtns in SDN. It is very difficult to write everything here and how to use the "code" button when i create a new thread in SDN?/
    thanks
    sankar

    hi
    yes i got some entries in SM50 with w at the left
    A  Error Code ITS_TEMPLATE_NOT_FOUND.
    W      *** ERROR => diag: Template for modulepool ZYMOVIE1, dynpro number 9000, service zymovie1 is not found and GenerateDynpro fla
    W      *** ERROR => plugin: XKrnHandleResponse failed rc= -25 [itspxkrn.cpp 764]
    W      *** ERROR => plugin: ItspXKrn_HandleResponse failed. 0x2b96feff78 rc: 0 [itspxkrn.cpp 391]
    W    *** ERROR => ipl_ConvertOut failed rc = 1, send icf error page [itsplxx.c    1551]
    let me know if you need any other information
    thanks
    sankar

  • Define Service Desk Destination in the Solution Manager System (Dump creen)

    hi,
    in SPRO when i click on Define Service Desk Destination in the Solution Manager System
    i got dump screen with the error below 
    any help?
    Runtime Errors         SAPSQL_EMPTY_TABNAME
    Except.                CX_SY_DYNAMIC_OSQL_SYNTAX
    Date and Time          13.07.2008 14:05:57
    Short text
        A dynamically specified FROM clause has an unexpected format.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLSHI2" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
         caught in
        procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
         RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        The running ABAP program attempted to execute an Open SQL statement in
        which a FROM clause was specified dynamically in the field "TABLE_NAME". In
         this
        FROM clause, either a table name after a join operator is missing, or an
         alias name after the key name "AS". The field "TABLE_NAME" could be empty as
        well.
    regards

    Hi,
    I am facing the same problem. What is SP15 ?
    Is there any SAP Note that can be applied to correct this ?
    Thanks.

  • Data Load Short Dump (ABAP/4 processor: ASSIGN_TYPE_CONFLICT)

    Hi Experts,
      I made few changes to the exisisting data target and transported it to Test system...
    Today when i loaded test data i got Dump: ABAP/4 processor: ASSIGN_TYPE_CONFLICT error
    Now i need to reactivate the Transformations and DTP's that will fix the error
    What is the reason for this error
    Thanks

    Yes, you are correct, you need to activate your transformation and then DTP to get rid of this error.
    The reason for this error is inconsistency b/w transformation and DTP.If you have made any changes to trasforamtion and activated it, then you need to activate the DTP also. If you are loading the data without DTP activation, you will get this error. This is because the DTP is build on transformation.
    Thanks...
    Shambhu

  • WD -Select options - DUMP -Practicing Rich heilman's app

    Hi,
    I am practising the tutorial created by Rich heilman /people/rich.heilman2/blog/2005/12/20/using-select-options-in-a-web-dynproabap-application
    I am getting following dump while running i browser.
    Error when processing your request
    What has happened?
    The URL http://ssss.com/sap/bc/webdynpro/sap/ytest/ was not called due to an error.
    Note
    The following error text was processed in the system DV1 : Exception condition "TYPE_NOT_FOUND" raised.
    The error occurred on the application server sape-dev_DV1_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: DESCRIBE_BY_NAME of program CL_ABAP_TYPEDESCR=============CP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DV1 in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sape-dev_DV1_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sape-dev_DV1_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 180 -u: XXXXX -l: E -s: DV1 -i: sape-dev_DV1_00 -w: 0 -d: 20090112 -t: 162129 -v: RABAX_STATE -e: RAISE_EXCEPTION
    All I did is i used a different table and follwed all steps.
    Rich,
    Thank you for the wonderful blog.
    Any idea?
    rgds
    Vara
    Edited by: Vara K on Jan 12, 2009 11:26 PM
    Edited by: Vara K on Jan 12, 2009 11:34 PM

    Rich,
    Here is what I did.
    I changed SFLIGHT TABLE to PROJ and tried to put only one select-options for field PSPNR.
    Node name = PROJ.
    I kept a break-point in these methods but  it got dumped before that only.
    method WDDOINIT .
    data:
    lt_range_table type ref to data,
    rt_range_table type ref to data,
    read_only type abap_bool,
    typename type string.
    data:
    lr_componentcontroller type ref to ig_componentcontroller,
    l_ref_cmp_usage type ref to if_wd_component_usage.
    * create the used component
    l_ref_cmp_usage = wd_this->wd_cpuse_select_options( ).
    if l_ref_cmp_usage->has_active_component( ) is initial.
    l_ref_cmp_usage->create_component( ).
    endif.
    * get a pointer to the interface controller of the select options
    *component
    wd_this->m_wd_select_options =
    wd_this->wd_cpifc_select_options( ).
    * init the select screen
    wd_this->m_handler =
    wd_this->m_wd_select_options->init_selection_screen( ).
    * create a range table that consists of this new data element
    lt_range_table =
    wd_this->m_handler->create_range_table(
    i_typename = 'S_PSPNR_ID' ).
    *add a new field to the selection
    wd_this->m_handler->add_selection_field(
    i_id = 'S_PSPNR_ID'
    it_result = lt_range_table
    i_read_only = read_only ).
    endmethod.
    method ONACTIONCONTINUE .
    data: node_proj type ref to if_wd_context_node.
    data: rt_pspnr type ref to data.
    data: iproj type table of proj.
    data: wproj type proj.
    field-symbols: <fs_pspnr> type table.
    * Retrieve the data from the select option
    rt_pspnr = wd_this->m_handler->get_range_table_of_sel_field(
    i_id = 'S_PSPNR_ID' ).
    * Assign it to a field symbol
    assign rt_pspnr->* to <fs_pspnr>.
    * Retrieve that data from the database. Normally it is suggested to
    * encapsulate the data retrieval in a separate class.
    * For simplicity, the SELECT statement has been implemented here.
    clear iproj. refresh iproj.
    select * into corresponding fields of table iproj from proj
    where pspnr in <fs_pspnr>.
    * Bind the data to the context
    node_proj = wd_context->get_child_node( name = `PROJ` ).
    node_proj->bind_elements( iproj ).
    endmethod.
    rgds
    vara
    Edited by: Vara K on Jan 13, 2009 12:10 AM

  • Dump during processing on multiple work process.

    Hi ,
    I have designed a prohgram "report1" which creates variants for another program "report2" and schedules those variants in back ground on multiple work processess.
    When run the "report1", it creates 19 variants for "report2" and those variants will be scheduled for background process on multiple workprocess.
    My problem is, when i execute "report1", out of 19 jobs 7 jobs have been cancelled due to dump.
    The dump analysis is as follows*
    Runtime errors         TSV_TNEW_PAGE_ALLOC_FAILED
    Short dump has not been completely stored. It is too big.
    h1 No storage space available for extending the internal table.
    What happened?*
    You attempted to extend an internal table, but the required space was
    not available.
    Error analysis*
    The internal table (with the internal identifier "IT_77") could not be
    enlarged any further. To enable error handling, the internal table had
    to be deleted before this error log was formatted. Consequently, if you
    navigate back from this error log to the ABAP Debugger, the table will
    be displayed there with 0 lines.
    When the program was terminated, the internal table concerned returned
    the following information:
    Line width: 1240
    Number of lines: 340000
    Allocated lines: 340000
    New no. of requested lines: 10000 (in 1250 blocks).
          Last error logged in SAP kernel*
    Component............ "EM"
    Place................ "SAP-Server SR-3110_ISI_30 on host SR-3110 (wp 26)"
    Version.............. 37
    Error code........... 7
    Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
    Description.......... " "
    System call.......... " "
    Module............... "emxx.c"
    Line................. 1886.
    Source code extract*
    001640   FORM get_new_info .
    001650
    001660     DATA: wa_res LIKE zrisu_openitems_view,
    001670           it_temp_final TYPE TABLE OF zrisu_openitems_view.
    001680
    001690     REFRESH: it_temp_final, it_final.
    001700   * collect the free memory
    001710     CALL METHOD cl_abap_memory_utilities=>do_garbage_collection.
    001720
    001730   * First find all the open FI document items on the system satisfying
    001740   *  the selection criteria.
    001750     SELECT opbel opupw opupk opupz gpart vtref vkont abwbl abwtp stakz
    001760            waers studt betrw mahnv blart xblnr
    001770            INTO CORRESPONDING FIELDS OF TABLE it_temp_final
    001780            FROM dfkkop
    001790            PACKAGE SIZE c_blksiz
    001800            FOR ALL ENTRIES IN s_opbel
    001810            WHERE opbel = s_opbel-low
    001820              AND augst = space
    001830              AND gpart IN s_part
    001840              AND abwtp = space
    001850              AND abwbl = space
    001860              AND bldat IN s_bldat
    001870              AND blart IN s_blart.
                APPEND LINES OF it_temp_final TO it_final.  ---> dump occurs at this statement
    001890       REFRESH it_temp_final.
    001900     ENDSELECT.
    001910     REFRESH s_opbel.
    001920
    01930     SORT it_final BY opbel opupw opupk opupz.
    01940
    01950     LOOP AT it_final INTO wa_final.
    01960   * Check the documentdate if relevant
    01970       IF wa_res-opbel EQ wa_final-opbel.
    01980   * Use information from last record  if same document  to make the
    01990   *    program faster.
    02000         IF wa_res-txt EQ 'DELETE NEXT RECORD'.
    02010   * The record should be deleted for the same reason as the last item
    02020           DELETE it_final.
    02030           CONTINUE.
    02040         ELSE.
    02050           wa_final-bldat = wa_res-bldat.
    02060         ENDIF.
    02070       ENDIF.
    If i run the jobs for which i got dump individualyy one after other, then the jobs executed successfully.
    Pls help me in this regrad.
    Can i use filed-symbols in thsi case to avoid dump?
    Thanks in advance .
    Taj

    HI
    It seems memory available to a particular process in your case was not enough to continue.
    Could you try to implement the same by convertin Report2 as an FM and calling it as:
    CALL FUNCTION func STARTING NEW TASK task
    So now instead of making different variants you could just loop over the FM with different values.
    If this does not seem feasible restrict your data anyhow.
    Revet with findings!

  • Dump compute bcd overflow.

    hi gurus thanks in advance .
    our SAP component version is ECC 6.0 on Windows NT & MSSQL database i got dump  compute bcd overflow.in program ZMM_PART2_REGISTER so what is problem plz give solution .
    thanks
    S.B.

    Example:-
    catch system-exceptions bcd_zerodivide = 1.
       rate = rate / kpein.    "put your logic
        endcatch .

  • Abap - dump/job PSI_MECHANIK_2 (Program GP3KJGNMPNR0TSDBY8HHNGVSW8I010)

    Hello guys,
    I have a problem, I've got dump: job PSI_MECHANIK_2,...I have no idea why,...
    Anybody can help me???
    Thanks,
    V.
    DUMP DESCRIPTION:
    An SQL error occurred when accessing a table.
    What happened?
    The database system detected a deadlock and avoided it by rolling back
    your transaction.
    Error analysis:
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "G_DELETE_RW_EXTRACTS_PARALLEL" "(FUNCTION)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    The database system recognized that your last operation on the database
    would have led to a deadlock.
    Therefore, your transaction was rolled back
    to avoid this.
    ORACLE always terminates any transaction that would result in deadlock.
    The other transactions involved in this potential deadlock
    are not affected by the termination.

    GP3KJGNMPNR0TSDBY8HHNGVSW8I010 is a generated program.  If this is SAP supplied stuff - raise an OSS note.  You'll have to give more info.  What is PSI_MECHANIK_2
    matt

  • In se16, nast table is giving dump.

    As a Developer what can I do for the below issue ?
    In se16,
    table name : Nast
    When I tried to view all the entires in Nast table, I have got dump saying that
    TSV_TNEW_PAGE_ALLOC_FAILED
    and code is
      564 try.
    >>>>> SELECT * FROM NAST                     "client specified
      566                  APPENDING TABLE INAST
      567                  UP TO RSEUMOD-TBMAXSEL ROWS BYPASSING BUF
      568    WHERE KAPPL IN I1
      569    AND   OBJKY IN I2
      570    AND   KSCHL IN I3
      571    AND   SPRAS IN I4
      572    AND   PARNR IN I5
      573    AND   PARVW IN I6
      574    AND   ERDAT IN I7
      575    AND   ERUHR IN I8
      576    AND   VSZTP IN I9
      577    AND   VSDAT IN I10
      578    AND   VSURA IN I11
      579    AND   DATVR IN I12
      580    AND   UHRVR IN I13
      581    AND   USNAM IN I14
      582    AND   VSTAT IN I15.
      583
      584   CATCH CX_SY_DYNAMIC_OSQL_SEMANTICS INTO xref.
    Could you please suggest me how to justify this ?"
    THANKS IN ADV.

    You are trying to view a large number of records and system is not able to allocate any new memory to store that records and dispaly on the screen. So, it gives you the short dump.
    If you want all the entries, try to run it in Background. Instead of F8, press F9 and fill up the details in the popups to schedule a job.
    Or, try to run SE16 for NAST with some restriction like: user or creation date etc
    Regards,
    Naimesh Patel

  • DUMP in CX_WD_CONTEXT - Could find attribute exception

    Hello Experts,
    We got dump while processing Recording Working Times in ESS at Portal level
    This dump occurred only for one user and working fine for other users.
    Please let me know what will be the solution for this dump.
    (*****Class CL_WDR_CONTEXT_NODE_INFO****)
    IF_WD_CONTEXT_NODE_INFO~GET_ATTRIBUTE
        1 method if_wd_context_node_info~get_attribute .
        2   data:
        3                  rtti        type ref to cl_abap_typedescr.
        4   field-symbols: <attr_info> type wdr_context_attribute_info.
        5
        6   if me->attributes is initial.
        7     me->map_node_info( ).
        8   endif.
        9
       10   read table me->attributes->* into attribute_info with table key name = name.
       11   if sy-subrc <> 0.
       12     if me->_all_attributes_read = abap_false.
       13       _get_all_attributes( ).
       14       read table me->attributes->* into attribute_info with table key name = name.
       15       if sy-subrc <> 0.
       16         raise exception type cx_wd_context exporting textid = cx_wd_context=>attribute_not_f
       17       endif.
       18     else.
    >>>>>       raise exception type cx_wd_context exporting textid = cx_wd_context=>attribute_not_fou
       20     endif.
       21   endif.
       22
       23   if attribute_info-rtti is initial.
       24     data: attr_ref type ref to wdr_context_attribute_info.
       25     attr_ref = me->_get_attribute_rtti(
       26         attr_name  = name
       27            ).
       28     if attr_ref is not bound.
       29       raise exception type cx_wd_context exporting textid = cx_wd_context=>no_valid_attribut
    Thanks in Advance,
    Swetha.C

    Hi Swetha,
    As you have mentioned that this dump occurs only for a user. I think for that user the attributes list is prepared dynamically and added to context node. So, one of the attribute is not found in the given context.
    I suggest you to set an EXTERNAL breakpoint at LINE 19 and run your application.
    When the control reaches this line, please use the STANDARD tab of your debugging window, to find the call stack.
    Now, click on a method of your component and find out what is missing
    Hope this helps you.
    Regards,
    Rama

  • Getting dump during opening the workflow definition

    Hello Experts
    I created one Workflow 2 months before and it was working fine till yesterday. when I check the workflow definition by clicking on push button 'Workflow builder' from transaction 'PFTC', I got dump.it is not opening workflow definition.
    I tried to open the workflow definition is from transaction 'SWDD' but I got dump from there as well.
    the short text of the short dump is  'Access via 'NULL' object reference not possible'
    I check the tables and all the steps included in workflow is present.
    Could you please let me know what could be the issue and how can I resolve it.
    Thanks in advance for your help.
    Edited by: Vibhor Goyal on Jan 11, 2011 11:50 AM

    Hi Vibhor,
    Is this issue happening with all the users trying to open this particular workflow?
    If this is a user specific issue, then it could be authorization or roles related. Else it could be more serious than it looks like.
    Also, check with the basis team if there were any OSS notes / patches applied in the system since yesterday which could have resulted in this issue.
    Hope this helps!
    Regards,
    Saumya

  • Hi dump

    Please use a sensible subject in future
    Hi
    I got a dump which and i don't know
    While the program was running, the program "Zxxxxx" had to be
      reloaded
    because a bottleneck pushed it out of the local
    program buffer. However, the database was found to contain an already
    And the piece of code that got dump is found the FM REUSE_ALV_GRID_DISPLAY
    .. Trace?
      if ( cl_alv_trace=>is_trace_on( ) eq 1 ).
        create object mr_trace.
        call method mr_trace->add_trace_item
          exporting
            i_trace_item = 'REUSE_ALV_GRID_DISPLAY'
            is_vari_slis = is_variant
            is_layo_slis = is_layout
            is_prnt_slis = is_print
            it_fcat_slis = it_fieldcat
            it_sort_slis = it_sort
            it_filt_slis = it_filter.
      endif.
      free memory id 'DYNDOS_FOR_ALV'.
      perform globals_push.
      gt_grid-flg_first_time = 'X'.
      perform reprep_check.
      g_repid = sy-repid.
      if i_screen_start_column is initial and
         i_screen_start_line   is initial and
         i_screen_start_column   is initial and
         i_screen_end_line     is initial.
        gt_grid-flg_popup = space.
        call screen 500.
      else.
        gt_grid-flg_popup = 'X'.
        call screen 700
                  starting at i_screen_start_column i_screen_start_line
                  ending   at i_screen_end_column i_screen_end_line.
      endif.
      perform globals_pop.
      clear g_repid.
    endfunction.
    Edited by: Matt on Apr 10, 2009 7:30 PM

    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          i_callback_program       = alv_repid
          i_callback_pf_status_set = 'SET_STATUS_ARCHIVE_POPUP'
          it_fieldcat              = fc[]
          i_default                = ' '
          i_save                   = ' '
          i_screen_start_column    = 3
          i_screen_start_line      = 3
          i_screen_end_column      = 107
          i_screen_end_line        = 20
        TABLES
          t_outtab                 = outtab.

Maybe you are looking for

  • Hi Sirs Need One Big Help With 8520

    Hi Have Some 8520 Hang In Logo .Have Wipe And Update By App Loader But Same Problem .Have  Clear Board With Thinner But  Same Problem .Have Write Firm 4.6 But After This Only On Led Red Any One Have Solution ???? Here Picture = http://i52.tinypic.com

  • Question on IPreview PDF corruption?

    My iPreview reader is reading a pdf document's highlights and notes in the  left column (when i select it) very oddly, it has a little symbol of an alien head in place of each space that I have selected in the text. This is a very large text and I am

  • Download not found

    page not found for http://download.oracle.com/otn/nt/instantclient/instantclient-basic-win32-10.1.0.3-20050113.zip also other links on windows instant client download page

  • Can Someone Help Me Find WebOS Doctor 1.3.5?

    Hey guys. I've kept my phone on 1.3.5 b/c of the bluetooth issues with 1.4. Anyways, my phone got stuck on the palm logo screen, and brought it into a sprint store to see if they could load 1.3.5, but they ended up loading 1.3.1 (doh!). I just want t

  • HT200041 what ever happened to larry?

    what year is it?