Got error in saving J1IIN

Hi,
When i am saving the excise in J1IIN, I am getting the below error:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 3.20' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
URGENT solution PLAS
Rgds

Hi,
Please review and evaluate the recommendations of note 1018071to resolve this issue.
Also, please check if the following settings are correct in your system and try to post the document.
SPRO >Logistics General >Tax on Goods movements >india >Account
Determination >Specifiy excise accounts per excise transaction.
Here for DLFC transaction type kindly make the PLANCD and RG23NCD account as credit entry not the debit entry.
Please assign points if it useful.
Regards
Ravinagh Boni

Similar Messages

Error while saving date value in Java dictionary

Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
Bhavik

Hi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: <b>target_date</b>
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
          int l_year;
          int l_month;
          int l_days;
          l_year = target_Date.getYear();
          l_month = target_Date.getMonth();
          l_days = target_Date.getDate();
     Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik

Error while saving Ibots

Hi,
I got following error while saving the ibots. Scheduler is running, and we checked in the configuration we found no error there
nqserror:12008 unable to connect to port 9705 on machine dev01
nqserror:12010 communication error connecting to remote end point access
nqserror 12002 Socket Communication error at call
Phani.

Hi phani,
Check out youe configuration steps again.check this links for configuration and are you missing anything
http://gerardnico.com/wiki/dat/obiee/schedulerconfiguration_
http://forums.oracle.com/forums/thread.jspa?threadID=1087495&tstart=10
Hope it helps you.
Cheers,
KK

Error while saving record "User:johndoe": Error -14071

I have added my augmented users from the AD server. When I select user and to apply a setting under Preferences I get this on attempting an "Apply", Error while saving record "User:johndoe":Error -14071. I'm authenticating to my LDAP not AD/All Domains.
I have the server bound correctly to the AD server. Bound to AD, then promoted to OD master.
Tried WGM from another Mac, same error.
I recall my AD admin extending the ad schema last year for OS X 10.4.
Thoughts? Thanks.

Thanks David and Mabel, and all for the suggestions. I did go through "Leveraging Active..." prior to posting. I did try your method of canceling the authorization to WGM and viewing Directories. I would select a user from this method and try to apply something from MCX, but still got the -14070 error. Yes, I do have my client bound 1st OD, 2nd AD, with OD first on the search policy for the client.
I though I had solved my issue by authenticating to WGM and LDAP. Then selecting Groups and the Members tab, I define an OD group and select that group. I can then click the "+" towards the right of the window. Then select my AD there which populates. I can add my AD groups or single users to my OD group. Then I'm able to apply MCX settings. But, no "blue" circle next to the group's silhouette. How is my method possibly incorrect?
Also, at some point I unbound my client from AD and it seems the client is ok with getting AD info off my OD server. Example, my AD sharepoint mounts for PHD.
But, I do have a pause of 20 secs. are more when logging into the client as well as accessing applications. Side effect of my method?

Error while saving data form in planning

Hi,
We are getting the below error while saving the data form in planning
"There was an error during the save process"
i believe our form is not exceeds 255 columns we were able to access the same form till yesterday
can any one please help me on this

One reason could be that the blocks that you are trying to save are locked either through excel-addin or someone else might be updating the same combinations. I have encountered such issues earlier and got the same error. Check if there are any locks in essbase while you are saving the planning data.

Error while saving config in MSY

Hi,
I am working on taking MSA 5.0 SP7 go-live. I am working in MDW. I posted a SDN post long back regarding the custom partner functions in MSA and got it resolved (followed the note 521871). I am trying to do the same in the PROD system and i am facing errors:
-> When i goto Cross-Component Settings->Relationship Categoty-> click on NEW i am getting the errors:
1. 'MTBLLFW-The attribute destination of the business object
relation type is not valid'.
2. 'MTBLLFW-the attribute source of the business object relation
types is not valid'
But it is allowing me to add an entry. When i save my customer entry i am getting the error :
3. 'UI_CORE_SAVE_FAILED_STA-Errors while saving'.
I ran the consolidated prefill for 5.0 and SP07. I followed the same procedure as i did in DEV. In DEV i never got these errors. I was able to create them in the first attempt.
If anyone has any idea please let me know.
Thanks in advance,
Karuna.

Hi,
did you already check i.e. compare the customizing subscriptions for both DEV MDW and PROD MDW sites?
Also you should check & compare the download monitor for CDB load in the CRM system(s).
I assume sth is missing there (see also your other post).
Regards,
Wolfhard

Offline Backup got error Status Finished with error

Dear all ,
OS AIX , DB Oracle , SAP ECC6.0 , Tivoli Storage Manager
Offline Backup got error Status shows Finished with Error   (Backups are fired through DB13)
Retune Code :0005 Error during processing
Detail Logs:
BKI0027I: Time: 12/10/09 05:19:06 Object: 47 of 47 in process: /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf Size: 14.422 MB, MGMNT-CLASS: WEEKLYMGM
BKI5005E: Tivoli Storage Manager Error:
ANS1312E (RC12)   Server media mount not possible
BKI1208W: The object '/oracle/IRP/origlogA/cntrl/cntlrIRP.dbf' will be retried [4].
BKI0027I: Time: 12/10/09 05:19:38 Object: 47 of 47 in process: /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf Size: 14.422 MB, MGMNT-CLASS: WEEKLYMGM
BKI5005E: Tivoli Storage Manager Error:
ANS1312E (RC12)   Server media mount not possible
BKI1231E: Maximum number of retries for file /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf exceeded.
BR0233E Backup utility has reported an error while saving file /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf
BR0280I BRCONNECT time stamp: 2009-12-10 05.20.07
#END /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf
BR0280I BRCONNECT time stamp: 2009-12-10 05.20.07
BR0304I Starting and opening database instance IRP ...
BR0280I BRCONNECT time stamp: 2009-12-10 05.20.26
BR0305I Start and open of database instance IRP successful
BR0280I BRCONNECT time stamp: 2009-12-10 05.20.26
BKI1215I: Average transmission rate was 237.735 GB/h (67.622 MB/sec).
BKI1227I: Average compression factor was 1.000.
BKI0405I: TDP waited 497 sec. for BRBACKUP in util_file_online communication.
BKI0020I: End of program at: Thu Dec 10 05:20:33 IST 2009 .
BKI0021I: Elapsed time: 02 h 20 min 31 sec .
BKI0024I: Return code is: 2.
BR0280I BRBACKUP time stamp: 2009-12-10 05.20.33
BR0279E Return code from '/usr/sap/IRP/SYS/exe/run/backint -u IRP -f backup -i /oracle/IRP/sapbackup/.beccdcmb.lst -t file_online -p /oracle/I
BR0232E 0 of 47 files saved by backup utility
BR0280I BRBACKUP time stamp: 2009-12-10 05.20.33
BR0231E Backup utility call failed
BR0056I End of database backup: beccdcmb.aff 2009-12-10 05.20.33
BR0280I BRBACKUP time stamp: 2009-12-10 05.20.35
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2009-12-10 05.20.35
BR0291I BRARCHIVE will be started with options '-U -jid ALGOF20091210030000 -d util_file -c force -p initIRPweekly.sap -cds'
BR0280I BRBACKUP time stamp: 2009-12-10 05.23.07
BR0292I Execution of BRARCHIVE finished with return code 5
regards

Hi,
> BKI5005E: Tivoli Storage Manager Error:
> ANS1312E (RC12)   Server media mount not possible
Have you checked tape is properly mounted on TSM ?
Check below guide on page 69.
http://www.redbooks.ibm.com/redbooks/pdfs/sg246554.pdf
Thanks
Sunny
Edited by: Sunny Pahuja on Dec 12, 2009 12:25 PM

"an error occurred saving the activex control"

I'm trying to compile an executable in Labview 5.1. When I run the build app, it gets about half way done then pops up the error:
"an error occurred saving the activex control"
After clearing the error message, it proceeds to go through the motions of compling the app, but no exe is generated.
The design mode progam run operates fine, and it saves fine as well in design mode.
Thanks!

wawatts,
Though Brian and I got a broken arrow because we didn't have the necessary ActiveX component installed, I imagine you get no errors on the development system because you do have the component.
This problem would be much harder to pin down on your side given the lack of development-environment errors and the sprawling design of the main VI. One possible troubleshooting approach would be the LabVIEW Find functionality (Edit >> Find). ActiveX functionality typically involves the use of Property Nodes and Invoke Nodes, so if you search for any Invoke Nodes (Select Object, then Functions >> Communication >> ActiveX >> Invoke Node) in the scope of your main VI and its subVIs, you could perhaps have turned up some hits that take you to the subVI that has the control that is presumably causing the problem.
Unfortunately, I fear that finding the problem area doesn't solve the problem. It seems to me that either the LabVIEW app builder or the ActiveX component is doing something unexpected or nonstandard that is leading to the error message.
I'm going to stick to my "upgrade the software as much as possible" guns:
1. Install the LabVIEW 5.1.1 patch I linked to above, if it isn't already installed. There were fixes to the development environment and changes to the app builder that might resolve your problem. This is a free patch.
2. Consider upgrading the ActiveX control. I think that the latest version is called IntuiLink for 54600-series Oscilloscopes, Version 3.1, and it's available here on the Agilent site.
It was easy to do a simple test using your Xezgetsetup.vi on my system (LabVIEW 7.1.1, XP) with the updated ActiveX control. First, I installed the Agilent software. Then, I right-clicked inside the ActiveX control on the front panel of Xezgetsetup.vi, chose Insert ActiveX Object, and selected Agilent 54600 Scope Control from the list. Then I had to go to the block diagram and relink a few of the property and invoke nodes by just left-clicking on broken nodes and re-selecting the items that your code was already displaying. That fixed the VI so that it would run again.
Then I built that VI into an EXE and got no errors.
Perhaps all this proves is that you would have clear sailing if you upgraded to LabVIEW 7.1 and got the most recent Agilent ActiveX control--and maybe this is a good reason to bite the bullet and do that upgrade now--but it's certainly possible that you can do the same thing in 5.1 and solve your problem. Worth a shot.
Hope that helps,
John

OS 10.6.8, Macbook Pro 3.1 error when saving monitor calibration, cannot save.

Macbook pro 3.1 OS 10.6.8, error when saving monitor calibration profile. Tried to name new profile, or save as an older profile, still got error when attempting to save.

Try a NVRAM reset, and then go through the monitor calibration again.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

I keep getting "Unknown Error while saving"

I keep getting "Unknown Error while saving"
Using APE-11 on Windows 7- This error is a first for me, after many years of using Premiere. The product is a mix of photos (jpg and png), video clips (mpg-2 and mp4), and audio clips (all mp3). When I try to publish as Standard DVD- MPEG-2. I get the error. Error repeats saving as MP4. Error gives no location on the timeline where it is running into an obstacle to saving, so I do not know where to begin looking to remove repair or replace the item causing the 'unknown error'. The prel runs fine, start to finish, giving no indication that the save may run into a problem on final rendering.
I have tried many different options like rendering the entire timeline prior to saving, converting the clips to all be the same format, with no resolution to the problem.
I have worked many long hours for many weeks on this project, and I am not going to give it up, especially when the majority of the clips were created on APE in the first place, and the images are all Photoshop edited images
HELP PLEASE!!
DougN

Screenshot of error message for above issue
Also: Since first report, I have attempted render with all sound clips removed (easiest to to with hundreds of clips/photos), with no help. Same error appears.
I will continue removing aspects of the project until I get a completed save, or until I get an answer here!
After removing the sound and video clips, video saved ok, with blank spots where the missing video clips were. So I reopened the original prel file, and began checking them individually.
When I checked the clip properties, it correctly identified the path to the source video, but when I asked it to 'reveal in project', I got this error
So I assume this is where the SAVE error is happening, but as I am not an Adobe coder, I have no idea what it is telling me.
I did check to insure that the source video from which this clip originates, is in the project assets. I checked all the other clips as well, and any clip from this source video, generates the same error.
The source video runs fine on its own and is an mpeg-2 file.
Properties of the source video are:

How to ignore error during saving?

I got the following error during saving:
It appears every time when i save the ai file,
how can I ignore it?

I just got the font from fonts101.
does not seem to have any embedding issues for me...

WGM error when saving settings

pop-up error while saving preferences in WGM:
*Error while saving record "user group name":
Error: -14006
setup:
OSX server 10.5.5 OD master on a Xserve.
Bind to AD with kerberos.
It worked fine for some time now, but i noticed the roblem while i was going to edit the managed printer setup by editing the users printer list. When i tried to save i received the pop-up message writen above and i choosed "dont save", suddenly the previous managed printer settings was gone. So i also lost the old users printer list even when i dint save the changes. Now, i can not neither add the old or the new printers. And that goes for several other managed preferences. I can edit Mobile account creating, but not the rules. When i tried to edit the dock, after same error, both dock and login preferences got flushed out ...
Do any of you guys have a similar experience and solution for this problem. I really dont want to reinstall the OD server. ...

Hi Volkan,
I faced same problem when i install my first MacOS X Server on my OD/AC integration implementation server.
If you tryed to add user from AD to OD to manage them, then you want to add some rules to those users. Firstly, you will not add them to Od to manage them. Probably you tryed to add rules to users from AC list. You couldn't apply your rules to user, because of you've got an error as you mentioned your post.
I figured out that problem to create a group on OD. Then added users from AC to this OD group. And then i setted some rules from preferences section of WGM. After all that management rules functioned properly.
I thing that, this method is gonna help you to manage your AD users over OD.
Kind Regards..

Error While saving a iBot

Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- Ashish

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

Got error in saving J1IIN

Similar Messages

Maybe you are looking for