Got error: Location Code is not enabled in the XML Gateway Server

Hi,
When I perform Compliance rule screening on GTM - Globel Trade Management,that I defined GTM as an Trading Partner on EBS R12.1.3,
GTM can send response to EBS,but I see the following error message via Transaction Monitor on EBS workflow:
[The Standard:OAG, Transaction Type:ITM , Transaction SubType:EXPORT_COMPLIANCE and Location Code GTM6.2 is not enabled in the XML Gateway Server. Pls check your Setup.]
On EBS,I defined an ITM Partner for GTM,named 'GTM6.2',according to the document created by you: ITM Setup.doc
and I also finished the following steps:
1. ITM Application Users
2.ITM Partner Service Types
3.ITM Parameter Setup
4.Order Type Creation: ITM Only
5.Customer Creation: create a customer named 'GTM6.2', also enter 'GTM6.2' as EDI Location
6.Define Transactions on XML Gateway as following:
<Header>:
Party Type: Customer
Transaction Type: ITM
Transaction Sub Type: EXPORT_COMPLIANCE
<External Transactions (Lines)>:
Standard Code: OAG
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Queue: APPLSYS.ECX_IN_OAG_Q
7.Define Trading Partners on XML Gateway as following:
<Header>:
Trading Partner Type: Customer
Trading Partner Name: GTM6.2
<Trading Partner Details>:
Transaction Type: ITM
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Map: WSHITEIN
Source Trading Partner Location Code: GTM6.2 (same as the value what defined in EDI Location for customer)
I think the combination of External Transaction Type, External Transaction Subtype, Standard Code,Source Trading Partner Location Code
should be existing once done above steps, I have no idea why the error prompted.
Does someone can tell how to trace the error?
Thanks,
Rambler

user12254038 wrote:
Can you send any supporting documents on ITM Setup? My client is implementing ITM for the first time and I wanted to know more details on how it works in R12.1.3 version of EBS?Oracle International Trade Management (ITM) Partner Integration: Specifications [ID 572524.1]
International Trade Management Integration [ID 259691.1]
How Can I Tell if International Trade Management is Installed or Not? [ID 742539.1]
What are the Required Setups for International Trade Management (ITM) Flows in Shipping Execution? [ID 782861.1]
What Patches Provide the Latest Fixes and Enhancements for ITM Adapter? [ID 465122.1]
How to Generate Debug Information From ITM Adapter for XML Processing [ID 738925.1]
How to Generate Debug File for International Trade Management (ITM) [ID 1294853.1]
Thanks,
Hussein

Similar Messages

Tax Code does not exist in the system (T007A)

Hi All
When we try to create a receipt for a particular expense type in ESS Travel & Expenses, we get the follwing error "Tax code Z0 does not exist in the system (T007A)". Upon creating a tax code Z0 it gives the following error "Tax code does not exist in the system (T007A)". When we change the Receipt currency to USD instead of Bristish Pound it gets accepted without the error. It works perfectly fine when expense report created using GUI. The error occurs only when we create the expense report using Portal ESS T&E. I was not able to find anything related to this in the SDN. If any of you could help me out, that would be great.
Thanks, Raj

Hello Mr. Raj!
I checked the related issues that other customers reported.
I came up with a list of things you can try that may help you solve your issue.
a) Check if the field V_706D_B-LAND1 is filled with the home country in the IMG step 'Define Global Settings'. So may I ask you to check. Moreover, if this is not the reason, may I also ask you, if you get the same error when using our backend test transaction PR_WEB_1200? Thank you,
b) Could you please check that you don't have any expense type with value " "(blank) in the tax code field in V_T706B1?
c) Apply Note 1129853 - Web: Input tax code for credit card receipts
d) Please follow in IMG:
Financial Accounting
Travel Management
Travel Expenses
   Master Data
    Control Parameters for Travel Expenses
     Define Global Settings
Input Tax
Country                                       { Your country here }
Enter an input tax code for 0% input tax [    ] <<<
If here it's blank, this must be filled with a tax code. I found this out when I set the field "Input Tax per Travel Expense" then I get a warning "Enter an input tax code for 0% input tax".
The reason for this is that in your system, you don't have a "blank" tax code and it looks for this entry. Please kindly define a tax code in this setting.
I hope I was able to help you with this information.
Wilian Segatto
SAP Support - HCM/XSS

Node id does not exist for the current application server id

Hi gurus,
when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
i executed the command select server_id from fnd_nodes and had the following output
SERVER_ID
991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
Please help me out.
thanks.

i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
applmgr >./adstrtal.sh apps/apps
You are running adstrtal.sh version 115.19
Executing service control script:
/dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
script returned:
adapcctl.sh version 115.55
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
please what should i do next to resolve this problem.
thanks

I deleted the backup on itunes, synced again and got the error message: itunes could not back up the iphone because the backup was corrupt or not compatible with the iphone

I am using iphone 3GS, after syncing for few times and got the errors. I deleted the backup from Edit-> Preferences-> Devices. Then I synced again, there was an error message: itunes could not back up the iphone because the backup was corrupt or not compatible with the iphone. What can I do? I have no backup anymore on ituens.

babesharon
I closed iTunes & manually deleted the file which was still stored locally even though it didn't display in Preferences. I have vista so I went to
C:\Users\{user name}\AppData\Roaming\Apple Computer\MobileSync and deleted everything in the Backup folder (though I left the folder as is). If you have a different OS search the apple website for the backup location.
I reopened iTunes & Synced with out a problem. I also got the update to install.
Good luck.

Error: ORA-00439: feature not enabled: Managed Standby

Hi there, after I turned on auto archiving in the init.ora file (altered archivelog) and started up the DB, I get the error "ORA-00439: feature not enabled: Managed Standby" while starting up the instance. Under the Alert log, it said License_max_session = 0 and license_sessions_warning = 0. Is that mean I need licenses in order to turn Auto archiving on? how?
PS: I can "alter system archive log start to '...';" though when the instance is open.
Thanks,
-Harry

I couldn't agree more with Kin..
Are you running Enterprise Edition? If not, Managed Recovery Mode, is available only with the Enterprise Edition of 8.1.x. This
may be why you are getting this error. Also, check v$option and see what 'Managed Standby' option shows, TRUE or FALSE. If
FALSE and you are running Enterprise Edition, then you may want to post to the Microsoft forum regarding getting this installed.
It would also help to know what your 'compatibility' parameter is set to.
I have read numerous...views..
some syntoms:
- enabling my database mode to archivelog
However when you take out the parameter
log_archive_dest_1 parameter and added the old log_archive_dest paremeter then database opened fine.
also if you remove the word location and the
character =
it might just work.
hope this helps
shah

Got error "Your acct is not valid for use in the Israeli store. You must switch to the US store before purchasing" while using an Israeli SIM card in Israel. I switched to Israel on my PC at home in mu itunes acct, but now cant connect to iTunes. help?

Got error "Your acct is not valid for use in the Israeli store. You must switch to the US store before purchasing" while using an Israeli SIM card in Israel. I switched to Israel on my PC at home in mu itunes acct, but now cant connect to iTunes. Help?

found it!
http://www.ehow.com/how_8202183_change-app-store-account-location.html
Instructions
1.
1Tap "Settings" from the main menu of your iOS device.
2Tap "Store."
3Tap "View Apple ID."
4Enter your user name and password.
5Tap the space underneath "Change Country or Region."
6Select the region where you will be located.
7Tap "Done."

Error "Jurisdiction code could not be determined" in so create bapi

I am using the bapi "SO_NEW_DOCUMENT_ATT_SEND_API1" for creating the sales order,
it gives the error "Jurisdiction code could not be determined" Sometimes there are two juridiction code maintained in the system .
1) During the ship to party address change at sales order , city , country and postal code fields determine the Juridiction codes. Sometimes there are two juridiction code maintained in the system for one city and in such cases BAPI fails to create an order.
2)When the ship to party is foreign country then we do not need Juridiction code in sales order. In such cases also the BAPI fails to create sales orders and writes an error log , saying juridition code could not be determined.
Proposed Soltuion.
We have to modify the BAPI to force the values of ship to address as it is from the text file without exiting the sales order creation.
Thank You,
Ganesh

hi ,
u need to give the right postal address. If it is then it won't give the warning message.
Regards,
Rose.

Bdoc error - Tax code 1 not valid

Hello everyone,
I am getting BDoc error "Tax code 1 not valid" . I downloaded the object "DNL_CUST_TAX" from R3 to CRM. After doing this, the BP's went through successfully from R3 to CRM.However while sending BP's from CRM to R3 , same error occured. Is there any other object which can be downloaded from CRM to R3. or any other way out??
- Arpita Shah.

Hi Arpitha,
Download the object DNL_CUST_TAX to CRM system then reprocess the errpr bdoc.
and let me know the status.
If the bdoc is in the red state after reprocessing,i think u need to create tax group in CRM img.
<b>Allot points if my post helps!!!!!!!!!!</b>
Regards,
Sathya Reddy.

I am getting error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone". I have deleted the backup and restarted my computer, but continue to get this error message. What do I need to do now?

I have recently updated my phone and am attempting to sync it. I got the error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone". I deleted the backup, restarted my computer, and even restored the iPhone, but continue to get the same error message. What do I need to do now?

iTunes places the iPhone backup in the following location. Navigate there & delete everything in the backup folder, but not the folder itself. You will have to turn on "Show All Hidden Files & Folders" to see it:
Mac:~/Library/Application Support/MobileSync/Backup/
Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

Error "Test Agent could not connect to the test controller" while configuring the Test Agent on Client machine

Hi,
I am getting an Error “Test Agent could not connect to the test controller”
while configuring The Test Agent on Client machine.
Pre-requisite used:
VS2012 update 4, Test agent & Test controller of same version used
User has TFS admin access.
Same user id used for configuring Test Agent.
Description:
Test controller is installed on server A. I want to install test agent on client machine B.
Windows Fire wall is OFF on both Machines A & B. While configuring Test Agent below error is occurred:
“Test Agent could not connect to the test controller”
In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”
In Event viewer below error details given:
Unable to connect to the controller on ‘My Server: 6901’. The agent can connect to the controller but the controller cannot connect to the agent because of following reason: The requested name is valid, but no data of the requested type was found.
Make sure that the firewall on the test agent machine is not blocking the connection.
Could you please help me to find solution?
Thanks in advance!
Kanchan M
Kanchan

Hi Kanchan,
So on each computer, you create a local user account that is a member of the Administrators group, and use the same account and password on each machine(controller and Agent), am I right?
Could you enable the detailed log message?
http://blogs.msdn.com/b/aseemb/archive/2010/03/07/how-to-enable-test-agent-logs.aspx
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
>>In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”I
met a similar issue before which was related to the Firewall exceptions, maybe you could refer to it here:
http://stackoverflow.com/questions/12249093/test-agent-could-not-connect-to-the-test-controller-vs2012-agents
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

System error: Default TXJCD is not filled in the table T001

Hi friends,
Can anyone help me out in this scenario? We are facing a peculiar problem.
We are in a upgrade project from 4.5b to ECC 6.0.Client is not maintaining any tax codes i.e they are maintaining it outside SAP.The problem is when ever the billing document is released to accounting(VF02) in ECC 6.0 it is showing this error System error: Default TXJCD is not filled in the table T001.But this is working fine in 4.5b.
Are there any basic changes regarding TAX JURISDICTION CODE is concerned from upgrade. Please provide.
Thanks in advance,
Yoga

Hi Yoga,
Probably, the program is showing error message FF799, please maintain transaction OBCL with a default tax jurisdiction code.
The tax jurisdiction code should be maintained at state level only and
corresponds to the tax jurisdiction code structure maintained in table
TTXD. For example, if your structure is 2-3-4-1. Then your default
code should be XX00000000. I suspect that the settings in transaction
OBCL are incorrect and hence the FF799 error, when shipping from a US
plant to a foreign ship-to customer (non-US).
Addional info concerning the Tax Interface for standard methods for
US taxes you can find at -   http://www.saplabs.com/projects/tax/
Documentation: Tax Interface Configuration Guide for release 4.6x
Please have a look at attached notes 112609 and 385127.
Here is the explaination that the process for tax-exempt transactions
has been changed.
Other notes you may need for OBCL :
-> 0627091   Message FF749 with billing data transfer
-> 0608159   Error FS791 during billing data transfer
-> 0380158   Jurisdiction code for export business transaction
-> 0419124   Export billing document with tax jurisdictions
I hope this information helps you,.
Regards,
Paulo

HT201210 error message: itunes could not back up the iphone "..." because the backup session failed. I don't know what to do to fix this problem?

I keep receiving the error message: itunes could not back up the iphone "....." because the backup session failed. Can anyone advise me on what I can try doing to fix this problem?

This Apple article talks about backup issues -> iOS: Troubleshooting backup issues in iTunes
Are you able to backup if you move the previous backup from the location below to the desktop?
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Error message: iTunes could not back up the iPod "iPod name" because an error occurred

Every time I try to back up my iPod I get this error message: iTunes could not back up the iPod "iPod name" because an error occurred. How do you fix it?

Try moving the existing backup file to a safe location and then try again. The backup file is located:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Error message "itunes could not connect to the ipad because an invalid response was received from the device".

Hi, I am having problems with itunes and my ipad........
I can use my ipad on my laptop but it will not connect to my main PC, I get the error message:
"itunes could not connect to the ipad because an invalid response was received from the device"
I have done all the Apple support ideas including re-installing itunes twice but no joy.
It used to work a week or so ago and no, I can't think of anything I have done which would have stopped it.
I have run msconfig and disabled everything but still no connection.
Anyone got any ideas?????

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115

Got error: Location Code is not enabled in the XML Gateway Server

Similar Messages

Maybe you are looking for