Got Exchage rate open when run aging

Dear All, our customer is on SAP8.8. One of the superuser reported, when she run the Aging report, she got exchange rate open (US and EU). The other superuser, he doesn't get the exchange rate screen open when he run the report by the same parameters. Both of their LC and SC are USD. All BP currency is USD. Is there anywhere I should check for the user profile? Thanks in advance.
Regards,
Yuka

John Lartey, like GordonDu said before it's related to the exchange rate settings. If there are undefined rates, the form will be opened.
Maybe, you changed the currency when you did the report. To fix this, the user must have professional license and full authorization in "Exchange rates and indexes".
Then, run again the aging report and put any number in the undefined currency; this should run the report. In the report, modify the currency from the "select" or "list box" which is in the header and give a click in "OK". After that, in "Exchange rates and indexes" delete the value entered for the undefined rate and test again the report.
The form shouldn't open, if the rates are defined. Now, everything should be right.

Similar Messages

  • Using Version 4.0B getting exchage rate

    Hi All,
    I'm using 4.0B version.
    wn i used version ECC or 4.7 i got exchage rate from the table TCURR base on fcurr,tcurr,gdatu.
    For converting date format i used the logic:
    convert inverted-date <b_tcurr1>-gdatu into date <b_tcurr1>-gdatu.
    But in this version it not allowing.Can you help for this i want to retrive exchange rate based on gdatu.
    thank you,
    Sriiii.

    Hello
    1. Inverted date = 99999999 - date (for today 99999999 - 20090213 = 79909786)
    2. Date = 99999999 - inverted date (for today 99999999 - 79909786 = 20090213)

  • Error when running Payables Open Interface Import

    Hi Experts,
    I need help. I'm facing a problem when run Payables open interface import. Before that, I was running same concurrent many times and the concurrent program is completed normal. But, when I try again I'm getting error. what exacly problem is? What should I do?
    arguments
    p_org_id='84'
    p_sources='manual invoice entry'
    p_batch_name='N/A,
    p_purge_flag='Y'
    p_trace_switch='N'
    p_debug_switch='Y'
    p_summary_flag='Y'
    p_commit_batch_size='1000'
    p_user_id='1110'
    p_login_id='75025'
    Current NLS_NUMERIC_CHARACTERS Envirotment Variables are :
    American_America.US7ASCII
    Enter Password:
    REP-0004 : Warning : Unable to open user preference file.
    MSG-00001 : (Before Report) After SRWINIT
    MSG-00002 : (Before Report) After Get_Company_Name
    MSG-00003 : (Before Report) After Get_NLS_Strings
    MSG-00001 : (Get Base Curr data 1) Get Base Currency Information
    MSG-00004 : (Before Report) After Get_Base_Curr_Data
    MSG-00005 : After Get Operating Unit
    MSG-00006 : After Get Purge Flag
    MSG-00002 : (Before Report Trigger 1) Import Invoices.
    MSG-00003 : (Before Report Trigger 3) Exception : When Others.
    REP-1419 : 'beforereport' : PL/SQL program aborted.
    REP-0069 : Internal Error
    REP-57054 : In-process job terminated: Terminated with error:
    REP-1419 : MSG-00001 : (Before Report) After SRWINIT
    MSG-00002 : (Before Report) After Get_Company_Name
    MSG-00003 : (Before Report) After Get_NLS_Strings
    MSG-00001 : (Get Base Curr data 1) Get Base Currency Information
    MSG-00004 : (Before Report) After Get_Base_Curr_Data
    MSG-00005 : After Get Operating Unit
    MSG-00006 : After Get Purge Flag
    MSG-00002 : (Before Report Trigger 1) Import Invoices.
    MSG-00003 : (Before Report Trigger
    Best Regards,
    Ade Hilman

    Hi Ade;
    Please check below note which is mention similar error
    Validate AAD fails with ORA-20001: -: XLA-95103: An internal error occurred. [ID 943024.1]
    Hope it helps
    Regard
    Helios

  • Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw

    Hi,
    I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
    data that is pulled from a SQL Server at regular intervals), it fails with the following error:
    Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
    The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
    When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
    I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
    are missing.
    Thanks in advance for any advice you may have.

    This is truly killing me ... trying to get it working on Windows Server 2012 without success.
    I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
    I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems  in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc.,  -BUT-
    The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively- 
    I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
    Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
    ( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
    folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
    [VBScript error msg]
    Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
    access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
    • The file name or path does not exist.
    • The file is being used by another program.
    • The workbook you are trying to save has the same name as a currently open work
    [Powershell error msg]
    Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
    ere is not enough available memory or disk space.
     To make more memory available, close workbooks or programs you no longer need.
     To free disk space, delete files you no longer need from the disk you are saving to."
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : ComMethodTargetInvocation
    You cannot call a method on a null-valued expression.
        + CategoryInfo          : InvalidOperation: (:) [], RuntimeException
        + FullyQualifiedErrorId : InvokeMethodOnNull

  • Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

    Hi,
    Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

    Hi Shilpa ,
    Please refer to the following link and see if that helps you out.
    https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
    Are you trying to access the PDF with Acrobat or Adobe Reader?
    Regards
    Sukrit Dhingra

  • Is it possible to have a VI "run when opened" when accessed via Internet Explorer?

    I am trying to get a remote panel application to "run when opened" when is accessed via Internet explorer. I have multiple remote panel licenses on the server and the VI is Re-entrant. The application works well except for this issue. Having the VI "Run When Opened" via IE is very important to the user. As is, when IE opens, the user must click on the panel image once to get the VI's attention and then again on the start arrow to run the program. Is there any way around this or a way to simplify the process?
    Thanks.
    Solved!
    Go to Solution.

    This is actually the intended operation of remote front panels, however, we can simplify the operation to meet closer with what your customer wants.  Basically, if you were to always have your program run in somewhat of an idle state, you can use the Application Control>>Property node for 'RemotePanel.ConnToClients' property to determine when a user is connected and run the proccess of the program as soon as a connection is detected.  When no connection is detected you could have the program run in an idle state.  The attached screenshot shows a general way to do this.  Have a good evening!
    -Bob
    -Bob
    Attachments:
    idle state.JPG ‏45 KB

  • Got the following message when trying to install Photoshop CC "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." I use Windows Vista so not sure what I need to

    Hi there
    I got the following message when trying to install Photoshop CC, "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."
    I use Windows Vista so not sure what I need to do now! Any help would be much appreciated thanks.

    Photoshop CC only runs on Windows 7 or Windows 8/8.1. Not Vista.
    System requirements | Photoshop

  • Opening PDF in Browser when running in Server 2008 R2 RemoteApp (Terminal Services)

    We are running a RemoteApp server that allows users to access an intranet page, through this can can click and open a number of PDF documents.
    When connecting and running locally (RDP) the PDFs open in the browser as required, but when running through remoteApp its forcing the PDF to open into Adobe Reader.
    Im getting this on all versions of IE 9-11 and Reader 9-11, ive enabled view in PDF and also the IE add-ons but it still forces the file to open in the full application.
    Group polciy isnt an issue as Ive tested this on a live users, and also a clean slate test account. Ive even moved the RemoteApp server out of the domain and tried as a local system (with local accounts) and the same behaviour happens.
    This is the same if I try and open PDF documents from the internet.
    Any Advice would be good
    Steve.

    Hi Uber,
    This is a known issue that error occurs when running report "Count of instances of specific software registered with Add or Remove Programs" due to non-printable characters for XML. Based on internal research, the hotfix for this issue will be
    included in the System Center 2012 Configuration Manager Service Pack 1.
    As a workaround, you can remove the nonprintable character populated into the report parameter by referring to the following KB article:
    http://support.microsoft.com/KB/914159
    Hope this helps.
    Regards,
    Mike Yin
    Mike Yin
    TechNet Community Support

  • Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
    Thank You!
    I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
    BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
    Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
    Incidentally, whats up with all of the Java Console Add Ons?
    I have:
    Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
    Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
    What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
    Also, .NET Framework 0.0.0 Should I uninstall it?

  • I had to reinstall Win 7 and PS CS5, and the updates fail even when opened using 'run-as-admin'. Why?

    The title says it all ...
    I had to reinstall Win 7 and PS CS5, and the updates fail even when opened using 'run-as-admin'. Why?

    If you are using Help 》updates, it is outdated. You can however go to Product Updates on the Adobe.com website and download your updates there. I am not at my desk b<t when I get back, I'll get the links unless someone else can do that sooner.

  • Why does subVI open when a VI is run without highlighting execution

    When running the VI Proc Recipe Array without highlighting execution the subVI VPTS Proc Cmnd gets a green arrow over its icon and opens. I want to run the main VI without opening any of the subs. Why does that subVI open? All sub are in the attached LIB file and the test file needed is also attached. You should place the input file in the C:\VPTS\Recipe folder.
    Attachments:
    Vacuum_Pump_subVI.llb ‏949 KB
    test_rcp_011402.txt ‏3 KB

    This is because the SubVI VPTS Proc Cmnd has an option "Suspend when called".
    To cancel this
    1.open the subVI,
    2.click with the right mouse button on the subVI icon in the up-right corner of the window,
    3.select "VI properties...",
    4.choose category - Execution
    5.and uncheck the option "Suspend when called".
    Good luck.
    Oleg Chutko

  • Opening Balances changes when running business rules

    Good morning,
    We are experiencing problems with the opening balance calculation (Flow: F100) when running the consolidation business rules in BPC 10.1.
    For example, in 2013.12, Entity 1111 and Account C_ENL_DIV, the ending balance (Flow: F900) is 180.000 euros. When we run the copy opening balance package, the opening balance (F100) for 12.2014 is 180.000 euros, what which is correct.
    The problem comes when some consolidation rules are executed, for example, AU_DIVCTA. For the previous case, we can see that the opening balance changes, previously it was 180.000 euros, coinciding with the final balance of 12.2013 and now the cell is empty, what which is incorrect. This occurs for more than one business rule.
    The definition for the AU_DIVCTA business rule, is the next one. You can see that this do not affect to the opening balance in any case.
    We attached an Excel where you can see this and much more similar cases the definition for the business rule AU_DIVCTA:

    Hi,
    Looks like the substitution variables its looking for are missing.
    Can you check that?
    Regards,
    Amol

  • Hi, I just got my Iphone 5s when I open my camera when my phone is lock te icons of the flash and the reversing camera is there, but when I try to open my camera from the apps camera the icons of the flash, the reversing camera is not there anymore?

    Hi, I just got my Iphone 5s when I open my camera when my phone is lock te icons of the flash and the reversing camera is there, but when I try to open my camera from the apps camera the icons of the flash, the reversing camera is not there anymore?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • Adobe reader doesn't open when word is running

    my adobe reader won't open when I have word open. It opens fine with other components of the office suite. I have windows 8 on my machine. I have tried running and accepting eula.exe but this had no effect. Any ideas?

    I have Adobe Reader XI version 11.0.06 and Microsoft office professional plus 2013 version 15.0.4605.1003

  • HT1199 Hi. I've got an issue with Pages running on Mavericks on Macbook air. Every time I open the app it hangs right there and I can't do anything on it. I've uninstall and install it back again but the issue still persists. Any help please?

    HI. I've got an issue with Pages running on Mavericks. Everytime I open it up it just hangs right there and I can't do anything with it. I've deleted the app and installed it back again but the problem sitll persists. Any help please?

    Thank you so much for helping,
    But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
    Anyway thank you very much for your time and effort!!!!

Maybe you are looking for