Got flash working

have been having trouble getting flash to work for 2 months. tried everything that has been posted here to no avail. was playing around with my avast antivirus last night and found that it had flash disabled. I enabled it in avast and now flash works great. hopes this helps some one.

FYI,
https://bugs.webkit.org/show_bug.cgi?id=21748
> the Flash Player 10 plugin works fine in Konqueror 4.2, so
> there must be some way to plug it into non-GTK code.

Similar Messages

  • Got a new dell laptop. adobe flash works on IE but not with Firefox. Manual installation failed. help!

    When trying to install adobe plugin, it fails, as does trying to do it manually. When trying manually, it says to close firefox then it will work but it doesn't. Again, when under IE, adobe flash works but I prefer Firefox.

    In step one you would have downloaded that file, if Firefox is using the normal configurations you should find it in the same location where you download any other files.
    To find out where Firefox downloads files, in the options window go to the general panel and it should show where files are downloaded to. Alternatively if Firefox stores the history of downloaded files, open the downloads window (you can do that by using keyboard shortcut Control+J), right-click on the install_flash_player.exe entry in the download window and select "Open containing folder"

  • Intel 82845G and xorg 1.8 - anyone got it working?

    By 'working' I mean 'not crashing'. I can install xorg 1.8 just fine, but rebooting every half an hour is not my thing. The crashes happen even if I'm just typing away at the xterm.
    [karol@black ~]$ lspci -v | grep -i -A8 VGA
    00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA controller])
    Subsystem: IBM NetVista A30p
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at 88000000 (32-bit, prefetchable) [size=128M]
    Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915
    Kernel modules: i915
    There are some bug reports in both our and upstream bugtrackers but the issues are still open.
    I'm quite happy w/ xorg 1.6 I have so it's not a life-or-death situation by any means. If you got it working, please tell me how you did it - there's a myriad of "switches" to flip and I'm too lazy / busy to try them all out. I've tried a few and got nowhere, so I'm asking you, my fellow Archers.

    Same hardware here, having this issue for about two years now with linux in general, about six months ago I start using arch, to my surprise it didn't crash that much and when it did a least it took me to the console login, so no data was lost. a month ago I switch to arch completely and just for the fun of it I have four arch DE in my single computer the results are as follow:
    Gnome=no crashes smooth performance even with composite enabled (the simple one build in gnome)
    KDE=freezes on some heavy loaded webpages with flash media, a strange garbaged screen occurs when I am using some software in root mode like dolphin then it crash and takes me to login window. this could be kde I have no idea.
    Xfce=freezes with heavy flash media once in a while. can be restarted by killing x.
    LXDE=no crashes/freezes (I use it just for internet surfing)
    all of the above with up to date software.
    Coming from Ubuntu lucid I may said that the driver has been improved, and probably cutting the fat out of the system may improve performance. I use gnome as my main system and all I can say is that finally I can use my computer for something else other than trying to fix xorg and intel. I was really moved to buy a new one but Arch just give me some more juice out of this old machine. same intel card than described in the first post. this is definitely not my Ubuntu 8.04 which was flying in amazing compositing effects but a least is back to a tool I can work on.
    All of my systems are fresh installs, all of them with the xorg 1.8 and the ..34.. kernel since the beginning, there is no xorg.conf file on any, I haven't had a crash in which I need to do a hard restart.

  • Flash works on IE 9 (64-bit) but not on IE 9 (32-bit)

    I have Windows 7 64-bit. I followed the steps in installing Flash on 64-bit for Internet Explorer. However, in some cases I need Flash to work on my 32-bit Internet Explorer and it simply isn't working. I downloaded the manual (silent) flash installer which was 64 bit and the site states that when you install the 64 bit version, the 32 bit installer will also be installed. This is correct, however when I go to for example a flash site it won't work in my 32-bit Internet Explorer. The thing that confuses me is that it shows up in my add-ons in 32 bit Internet Explorer and it is enabled but nothing that requires flash works!
    Does anyone have a solution please, because I have tried everything, including using the uninstaller and downloading a variety of versions.
    Thanks.

    This is so annoying!! For example, when I'm on my internet explorer 64-bit browser, I go to download and install flash. I proceed to download it and when I double click to install, the installer just deletes itself?? This is so weird, I tried the same with the 32-bit browser and it also deletes itself. The only way I got flash to instlal for internet explorer was by visiting the archived downloads page and downloading the full zip file, however after this, Flash only works in 64-bit internet explorer not 32-bit internet explorer. I have tried absolutely everything from using the uninstaller, removing program files then reinstalling again but still no fix! Surely, someone can help.
    I found another thread where someone had the same problem as me but got it to work somehow. This is the thread: http://forums.adobe.com/message/4225581. He managed to fix it from a link someone provided him which is no longer available. Please, I need someones help!
    Thanks.

  • Flash works in Flash editor but not when puiblished

    Hi
    I have got my flash working fine in the editor but when I
    publish it, neither opening it in IE from the hard drive, nor from
    the internet works.
    The animation works fine, but there should be images loaded
    onto the animated squares and there's not.
    Any thoughts?
    Thanks

    LLuis12 wrote:
    > Hi
    >
    > I have got my flash working fine in the editor but when
    I publish it, neither
    > opening it in IE from the hard drive, nor from the
    internet works.
    >
    > The animation works fine, but there should be images
    loaded onto the animated
    > squares and there's not.
    My guess is your paths are wrong to the loaded content. Done
    for local view
    not for html. Make sure the paths to files are a ok.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • I have Just Got Flash Builder 4.5 but I wanted Flash Builder for PHP

    I have Just Got Flash Builder 4.5 and I wanted Flash Builder for PHP do I need to buy the the separate product (Flash Builder for PHP) or can I use the Flash Builder Professional 4.5 that I have just purchased?
    And If I can use the Flash Builder Professional 4.5 what do I need to add to it to get it to work with PHP?

    Trial mode expires prematurely
    http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

  • How I got Flash Player 9 fixed

    I got Flash Player 9 fixed after trying all kinds of things
    in these posts..
    I had the problem where I would see the quote mark " instated
    of the content at the download installation page
    I'm running Windows XP media edition
    Here is what I did to get it working on my system.
    I'm not sure if each of these steps are essential
    but this is what I did that worked for me.
    It's a combination of things I found in different forums.
    1. I used the uninstaller at Adobe's Web site following the
    instructions given here:
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14157
    2. I went to this link and installed the latest FlashPlayer
    version 9 from Adobe's web site here:
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash
    I tested it and it failed to work at this point.
    3. I downloaded and ran this installer
    "install_flash_player_active_x.msi" save it you'll need to run it
    twice
    http://fpdownload.macromedia.com/get/flashplayer/current/licensing/win/install_flash_playe r_active_x.msi
    running this will close all browser windows so save this link
    or print this out first.
    when I ran this I got an error message it said something
    about Flash9.ocx failed to install or register.
    so I did a search for it and found it in
    C:\WINDOWS\system32\Macromed\flash I copied it and pasted it to
    C:\WINDOWS\system32
    I tested it and it failed to work at this point.
    4. I opened regedit............ click start.. click run..
    type in regedit.. click OK
    Then went to HKEY_CLASSES_ROOT\
    and went down the list to each of the following and for each
    one I allowed full control to administrator
    to do this locate it, right click on it, left click
    permissions, make sure administrators in highlighted,
    put a check in the box under Allow for full control, choose
    apply then choose OK.
    I read in the forum that some of these might not be there no
    worries if they are not.
    .mfp
    .sol
    .sor
    .spl
    .swf
    FlashFactory.FlashFactory
    FlashFactory.FlashFactory.1
    FlashProp.FlashProp
    FlashProp.FlashProp.1
    ShockwaveFlash.ShockwaveFlash
    ShockwaveFlash.ShockwaveFlash.1
    ShockwaveFlash.ShockwaveFlash.3
    ShockwaveFlash.ShockwaveFlash.4
    ShockwaveFlash.ShockwaveFlash.5
    ShockwaveFlash.ShockwaveFlash.6
    ShockwaveFlash.ShockwaveFlash.7
    ShockwaveFlash.ShockwaveFlash.8
    Then I went to
    HKEY_CLASSES_ROOT\CLSID\
    and did the same for these
    {D27CDB6E-AE6D-11cf-96B8-444553540000}
    {D27CDB6E-AE6D-11cf-96B8-444553540000}\InprocServer32
    I tested it and it failed to work at this point.
    5. I ran "install_flash_player_active_x.msi" again and this
    time it gave me an option to Repair or Fix
    a previous installation and I chose that. It ran fine with no
    error message.
    I ran regedit again and checked to see if it changed the
    permissions and found a couple of them had
    changed and so I set them back again.
    Then I tested it and it worked fine!!!
    Now I'm happy I can play backgammon on Windows Live Messenger
    with my friends...

    I might add more info about the original problem.
    So you can tell if it's the problem your lookin for a fix for
    Whenever I installed FP9 it was as if I had not done it.
    I would see the quote mark instead of the content.
    the next time I would Go to a site that required it
    it would just ask me to install it again
    I could find it in Add Remove programs I could not un install
    it from there
    I needed the un installer program to do so.
    I spent a lot of time trying till I got it fixed I hope this
    helps someone

  • Please help.  Got TopLink working, but now I can't run a JSP page

    I am using JDeveloper 9.0.3.
    I got TopLink working successfully. Meaning I can access the DB using my mapped TopLink classes from my java code in JDeveloper.
    However, now I can't even run the default .jsp page.
    I am getting the error:
    Error instantiating application at file:/C:/LBIT/LBIT-oc4j-app.xml: Error parsing data-sources config at file:/C:/LBIT/LBIT-data-sources.xml: Fatal error at line 0 offset 0 in file:/C:/LBIT/LBIT-data-sources.xml: The encoding "windows-1252" is not supported.
    If I go change the "LBIT-data-sources.xml" file to "ISO-8859-1," as soon as I run the .jsp page (from JDeveloper) the "LBIT-data-sources.xml" file gets overwritten with a new one that contains the "windows-1252" encoding line again.
    What can I do to fix this???
    I know someone else has run into this problem!!!
    Please help. Thanks so much.
    Andy

    You could change the encoding by doing the following.
    Stop Embedded OC4J Server (Run | Terminate | Embedded OC4J Server)
    Tools | Preferences
    Select Environment
    Change the Encoding to ISO-xxxxx
    Click OK
    Run your JSP now.
    Atleast this should fix encoding generated into data-sources.xml
    raghu
    JDev Team

  • I've just purchased a new 2014 15" MacBookPro to replace my much missed 17" MBP. I got the works: OS 10.9.4, 2.8GHz Intel i7, 16GB memory and a 1 TB SSD, but despite the expense, I still don't have a computer that works...  The problem is that every

    I've just purchased a new 2014 15" MacBookPro to replace my much missed 17" MBP. I got the works: OS 10.9.4, 2.8GHz Intel i7, 16GB memory and a 1 TB SSD, but despite the expense, I still don't have a computer that works...
    The problem is that every time I try to open any program from Office 2011, I immediately get the following window, for example for Word: "Microsoft Word has encountered a problem and needs to close. We are sorry for the inconvenience." This happens each and every time I try to open Word or other Office 2011 component.
    Thinking it might be a licensing issue, I purchased and downloaded a new copy of Office 2011 from Amazon and installed it on my new MBP. Same issue once again.
    I tried to remove all copies of Office 2011 from the MBP, but the instructions provided by Microsoft required about three page and seventeen steps and the page was somehow corrupted and would not print in its entirety, nor would it e-mail as anything other than a link to the corrupted page. Not trusting my memory, I decided not to try this without adult supervision.
    I used Disk Utility to repair Disk Permissions, as described on an existing thread regarding the same problem, but to no avail.
    I removed and later replaced the "Microsoft User Data" folder from the Documents folder, but that was no help.
    I have copied the short version of the "Microsoft Error Reporting log version: 2.0," below, for those of you with a deeper knowledge of the internal workings, or non-workings of things Mac when crossed with things MS.
    Error Signature:
    Exception: EXC_BAD_ACCESS
    Date/Time: 2014-08-28 03:31:31 +0000
    Application Name: Microsoft Word
    Application Bundle ID: com.microsoft.Word
    Application Signature: MSWD
    Application Version: 14.4.3.140616
    Crashed Module Name: CoreFoundation
    Crashed Module Version: 855.17
    Crashed Module Offset: 0x00018442
    Blame Module Name: MicrosoftOleo
    Blame Module Version: 14.4.3.140616
    Blame Module Offset: 0x000017f3
    Application LCID: 1033
    Extra app info: Reg=en Loc=0x0409
    Crashed thread: 0
    Surely others have encountered and solved this same problem, and I'm hoping they can help me do the same. I don't know if this is a known issue or simply a matter of my having bumbled naively through a process far more complex than I was led to believe.

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • Just started MobileMe.  Struggled with the setup of iCal but eventually got everything working fine for about a day.  Then I started receiving an iCal error message stating that the URL was wrong.  Of course, sync no longer works.  What is correct URL?

    Just signed up for MobileMe.  Had a little difficulty setting up iCal but eventually got everything working.  Whether posting to iCal on my Mac Book or iPhone, sync seemed to be working fine for about a day.  Then suddenly when I opened iCal on my Mac Book, I would receive the following iCal error message:
    "The calendar https://cal.me.com/calendar/calendar/principals/users/1.1117025442/ was not found on the server. Make sure the URL is correct."  I know where it is located but because I did not enter the URL when I set up MobileMe/iCal, I don't know what the correct URL should be.

    Mike,
    Welcome to Apple Support Communites.
    Review; MobileMe: Setting up iCal for the new MobileMe Calendar, and post back with further questions.

  • I deleated numbers and pages files and apps on my iPhone and when I got to work all my files were gone from numbers and pages on my iPad. How do I get those files back on my iPad?

    My storage was getting low on my iCloud, so I decided to delete my files from numbers and pages on my iPhone and delete the apps on my phone because i  did not really use it on my phone.  When I got to work and clicked on pages and numbers on my iPad the files were gone. I assume the files were deleted through iCloud.  I did not want the files deleted on the iPad and would like to know how to get them back?

    If you also backed up to your computer - you can restore from that backup - to retrieve the files. As far as I know- that should have no bearing on deleting them from iCloud - they should still be in that backup.
    If you used iOS file sharing with your computer - and saved the files to your computer - you can retrieve them from there.
    if the only place that the files were saved to was iCloud, I know of no way to get them back.

  • Newbie #2 - got AnyConnect working, can't get to work computers

    This simple solution is evading me!
    I successfully got AnyConnect working and I can get a VPN connection to my public static IP (69.x.x.x). I can ping devices on my home network (10.x.x.x) and surf the Internet from my home PC, but I can't ping any computer on my work network (192.x.x.x).
    I added a NAT exemption rule (please see attached screenshot of the NAT exemption rule), and I entered the command management-access inside in the ASDM, but I still can't ping any work computer.
    Thanks!

    And also,
    Just to make sure that the ICMP traffic/connections work with regards to firewall settings.
    Make sure you have ICMP inspect enabled on your firewall.
    My firewall is at the newest software so I'm not 100% sure if the menus/options are named in the sameway on your ASDM software.
    Try to navigate the following sections
    Configuration (in the top bar of the ASDM)
    Firewall (in the bottom left button section)
    Service Policy Rules (In the lefhand side with which is visible after choosing the previous section "Firewall)
    There should be something called "inspection_default" in the main window
    click to select it
    above it is the "Edit" button, click it
    In the opening window go to "Rule Actions"
    Check the box on the "ICMP" section and then apply the configurations
    There should also be a "Search" function in the ASDM. Somewhere in the top section of the ASDM window perhaps. If you type write "inspect" there (without the quotes) you should get the a search result that takes you to the to the section where you can edit the "inspect" configurations.
    If you have the ASA in pretty basic configuration you could simply "drop" these configuration lines to the ASA by choosing
    Tools (From the top most toolbar)
    Command Line Interface
    Choose Multiple Line
    Copy/Paste the below configurations
    Press "Send"
    policy-map global_policy
    class inspection_default
      inspect icmp
    - Jouni

  • Which version of Adobe Flash works properly with Mac operating systems?

    http://www.youtube.com/watch?v=no0Fn_gIoCo
    On Xat Flash Chatrooms it freezes. I thought Adobe Flash Beta 12 would fix my problem of the chats animations and chat freezing but it only temporarily fixed it because when I rebooted my Mac it still freezes the animation and chat! The latest versions of Adobe Flash non-beta Adobe Flash 11 something freezes too! Which specific Version of ADOBE Flash works properly on Mac OSX? NONE?
    I'm on Safari Browser and Mavericks 10.9 OSX.
    Specs:
    Haswell 3.4ghz
    graphics card: gtx 760
    4 gigs of ddr3 ram
    Macbook 2009: My other mac that does it too
    Intel duo 2 core 2.13ghz
    4gigs ddr2 ram
    I believe my macbook is running Nvidia 9400m 250mb card
    So each Mac that has had this problem is running Nvidia tho I don't know if thats the problem and I doubt it is. I'm sure it's a bug in Adobe Flash and Apple not caring enough to address the problems with Adobe Flash not working properly. If the two companies can't get a long, then why doesn't apple spend a little bit of money making their own compatible Flash for their safari browser?
    My friend who is a girl that I talked to on Xat said that she has a Macbook I think from 2010 or 2011 running Mavericks and her Macbook does not freeze. Is there an explanation to why my Macbook 2009 freezes in Adobe Flash and if there's a solution to it? Is her Macbook running ati card maybe?
    This is becoming very frustrating, so I need a solution. It does this on my Macbook and my Desktop Mac both which have Nvidia gpus.

    The latest Flash 11 works fine for me on Mavericks, on every site that plays videos.
    I have no idea what Xat Flash Chatrooms is (and really have no interest), but it sounds like the issue is with that site, as Flash in general works for literally tens of millions of people on most other sites.

  • Flash work in preview but not in the browser!?

    Hi there:)
    I have a .swf file in a table in Dreamweaver. When I preview it in place and in Safari, it plays. When I upload eveything, it is not in any browser on the server.. any ideas?
    Thanks!
    V

    Hi John!
    Yes, sorry about that.. here it is.
    http://farmingtonfarm.com/appraisal.html
    Thanks for your help!!
    v
    Date: Thu, 8 Apr 2010 18:52:05 -0600
    From: [email protected]
    To: [email protected]
    Subject: flash work in preview but not in the browser!?
    Can't really help without a link to the site. Can you provide one?
    >

  • ATI driver for win7 Macbook pro 2010 anyone got it working?

    I'm trying to get the windows7 ati driver to work. Loaded the bootcamp drivers but the display driver is just the generic monitor resolution 1280 x 1024.

    sorry its Nvidia and I finally got it working. Had to remove and then reinstall bootcamp drivers.

Maybe you are looking for