Got HDCP problem on macbook pro screen not even external screen

I have rented a movie (HD) on itunes.
I download it and try to play it, then I have a popup saying that the movie can't be displayed on my screen because of some HDCP restriction.
I don't understand, I've got a mbp retina display, I just try to play the movie on the computer, I did not even plug an external screen.
I am running Mountain Lion 10.8.4, with itunes 11.
I think the most innaceptable is that I did not even have a warning that say that I can't rent the movie, or that I would not be able to read it on my mac.

High-bandwidth Digital Content Protection(HDCP; commonly, though incorrectly, referred to as High-Definition Copy(right) Protection) is a form of digital copy protectiondeveloped by Intel Corporation to prevent copying of digital audio and video content as it travels across connections. Types of connections include DisplayPort (DP),Digital Visual Interface (DVI), and High-Definition Multimedia Interface (HDMI), as well as less popular, or now defunct, protocols like Gigabit Video Interface(GVIF) and Unified Display Interface(UDI).
Meaning, someone doesn't want you to be able to play the movie on the screen because of copyright reasons.
Sorry. (I know, DRM sukcs!!)

Similar Messages

  • My Macbook pro will not recognize external devices

    My MacBook Pro will not recongize external devices such as hard drives

    I know that is of no help, but I have the same problem with a Toshiba harddrive. My wifes Macbook Air recognizes it. No problem with the hd I guess. But my macbook pro won't show it in the Finder, About this mac or disk utility - even though it is running. I would also be glad to get a solution to this.

  • My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees'it

    My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees' it

    Hi there tomcrud,
    You may find the information in the article below helpful.
    OS X Mavericks: Set up Bluetooth audio devices
    http://support.apple.com/kb/PH14217
    Also, make sure your iPhone is not paired to the speaker while trying to piar it to your Mac.
    -Griff W. 

  • HT1338 the Macbook Pro would not even detect the external monitor.

    My Macbook pro will not connect to an external monitor after moving it. It has been running on this same monitor for 8 months. I switched to a new Desk last night, after hooking it up, the Macbook Pro would not even detect the external monitor. It was only showing the Macs monitor in Display. It did not even have where you could "Detect Display" available. Is there an update that I may have missed. I have tested all the Monitor connections with another laptop they all work.

    finally I would like to know if my computer falls under
    http://support.apple.com/kb/TS2377
    If nothing displays but you hear normal startup sounds, then it's possible this is a video issue, and you should take it to an Apple store or AASP.

  • Complicated problem: Laggy Macbook Pro, now not booting

    I am facing a very complicated issue with my unibody Early 2011 15" Macbook Pro (2.2 ghz core i7, 4gb 1333mhz ram, amd radeon 6750m, if you need hardware details).
    I guess the issue started after my computer started to get laggy for no reason at all: it was never the GUI that lagged, but whenever I would perform some data-dependent tasks such as playing a video, or trying to open a big file. This lagging did coincide with some of my friends playing around with magnets around my computer (which may have possibly corrupted hard disk data).
    After it got laggy, another major problem hit my MacBook, where I plugged in an old, broken USB into one of the ports by accident, and the computer suddenly shut it self off. The computer then seemed to have no power at all, with no response to pressing power button, or the battery indicator button. I feared the worst: that my logic board had been fried, so I immediately took my computer to the Apple Reseller. The technicians there said it was no problem at all, just that my motherboard had shut itself of in order to protect itself from a USB power shortage, and he unplugged and replugged this one small component on the logic board, which I am guessing is the Power Management Unit, and my computer miraculeously started booting.
    So then, I get back home, and the laggy problem is still there. I just had to cope with the problem for a few days, until I go back to the Apple Reseller, but then suddenly, after a restart, the computer started not even booting. The grey apple icon would blink, and turn into a circle with a cross icon. Checked online, and this is apparently related to corrupted system files. This is where I began to suspect that the USB shut-off from few days ago, did more damage than the technicians thought: maybe related to the hard disk, or RAM.
    But then again, it could have just been a coincidental corrupt hard disk from my actions, so I wiped/repartitioned my hard disk, and restored the OS and my files from a TIme Machine Backup. Again, the problem was still there, so I thought it might be to do with my backed up system files, so I did a fresh install of Lion.
    The fresh install of Lion seemed to eliminate all lagging problems, but after I started copying my files and installing applications from Time Machine, the lagging problem gradually returned. So another question arose, was it a faulty hard disk, or a corrupt file or application that was making it laggy? To check if it was my hard disk, I did a zero-over erase of the entire disk with Disk Utility, and sure enough, the writing process failed in the middle.
    After thinking I zeroed in on the problem, I replaced the hard disk in my Macbook Pro with another 750gb Toshiba SATA drive, and did a clean install of Lion. Once again, the laggy problem was gone, but just like the old hard disk, the laggy problem returned after I started copying files over and installing applications. Switching applications would take forever, and accessing folders on my hard disk would also be laggy. Playing videos was impossible, but the GUI (dock, spaces, etc) were all very responsive.
    Now, I thought the problem is either with faulty RAM, or my hard disk reader is broken (since two hard disks, although the original one was faulty, both failed). I read online that the Apple Hardware Test (AHT) can help identify and pinpoint hardware problems, so I inserted the 2nd disk that came with my computer (Applications Install), and pressed D, but then nothing came up. After countless attempts, I maybe thought it was the wrong disk, so I inserted the 1st disk (OS Installer), and held D while booting, but still, AHT would not load.
    After countless attempts at loading AHT, all of which led to me forcing shut down/holding power button after seeing the Apple logo, brings the problem to where I am at now: my Macbook does not boot into the login screen. After the Apple logo, and the spinner wheel have appeared, the screen turns white and the display becomes an infinite loop of switching from a gray color, to a white color.
    This problem is frustrating me very much, because there are so many possible causes, and the problem persists even after reinstalling the OS, and even replacing the ard drive. The logic board shutoff could be the cause, but then again, the lagging problem started way before it happened. Somebody please tell me what is the problem, and what I should do? Thanks in advance.

    novaria wrote:
    Didn't know my magnets were strong enough to corrupt hard disks.
    Yes, it's a method used to destroy data on a hard drive as it's recorded using magnetic fields, either "on" or "off" to represent the 1's and 0's that make up the basic building blocks of your data.
    But, the magnet does not explain why the hard disk reported an error when being erased with zero-over option.
    When the driver software has a problem reading the data on the drive, it assumes it's a bad sector, then maps it off and uses a spare. You likely ran out of spares.
    I just tried zero-over erasing the second, good hard disk that replaced the original, but again, it fails. Is this a common problem with the zero erase option?
    No.
    or is it something to do with my hard disks, or some sort of damaged hardware in my computer?
    Well this is drive #2 and it's new, and you get the same problem.
    It's either something your doing, (like moving the hard drive/ computer while it's operating thus the heads are striking the platters) or it's a hardware defect, or perhaps the magnets did other damage we can't see, perhaps it's magnatized the computer and that's affecting the hard drive or electronics.
    May be a loose or defective cable.
    It's time for a hardware evaluation at this point.

  • Firmware update problem-- my macbook pro will not start

    I think I took my finger off the power button and then put another finger down which turned my macbook pro off when I was installing some kind of firmware update... all I get now is a blank screen but the power button is on and it "feels" like something is going on inside but nothing... can some help? Thanks

    I did explain how long to hold down the 'C' key in a previous post. Anyway, you should hold it down until you see the start up screen.
    You could have a dirty or even a bad install DVD. If you could try it in another machine that would let you rule that out as a suspect. It's also possible that your DVD drive is damaged or bad. At this point it sounds like a trip to an Apple Store is in order.
    Good Luck!! And please post back with your outcome, it might help someone in the same situation.
    Edit: Did a little more checking around and found that this may be a common problem as in this other post...
    http://discussions.apple.com/thread.jspa?threadID=963645&tstart=330
    Could also be related to this...
    http://www.retrodata.co.uk/noticeapple_seagatedrives.php
    Either way, like I said above it sounds like a service call is in order.
    Again, Good Luck!

  • Migration Assistant Problem: Old MacBook Pro does not see new MacAir

    I have a brand new MacAir (OSX 10.7 and a 4 year old Macbook Pro (OSX 10.6)...trying to use Migration Assistant using Wifi, they're both on my network, but the new MacAir can "see" the old Macbook, but the old Macbook doesn't "see" the new MacAir...the wheel just keeps spinning as it tries to find another computer to migrate to but it just never sees it.  What am I doing wrong or what can I do to fix this problem?  Thanks!

    Sounds like there are two issues:
    1.  The Migration should start from the "To" computer asking for the stuff from the "From" computer.  Sounds like you're doing it the other way.
    2.  The MacBook Air isn't visible.  Correct that by going to System Preferences ---> Sharing on your MacBook Air and see if things look good there.  You should at least see a message near the top starting with "Computers on your local network can access your computer ..."

  • My macbook pro does not display full screen

    my macbook pro wont display full screen in any appp. it has a one inch margin  black on both sides

    Hi there joemoto,
    You may need to adjust your display resolution. Take a look at the article below for more information.
    OS X Mountain Lion: Adjust your display resolution
    http://support.apple.com/kb/PH11462
    -Griff W.

  • Problem waking MacBook Pro when connected to external display

    I have the new 13" MacBook Pro and like to use it connected to an external VGA display (Xerox) with the MacBook Pro in closed clamshell mode. The problem I am having is that after working for a a few hours, when I put the Mac to sleep with mains power connected, usb keyboard connected and the external display connected (via mini display to VGA adapter), the Mac will sometimes refuse to wake. I have a wireless Mighty Mouse also and the Mac is set to wake with Bluetooth devices. When I click a key on the keyboard or click the mouse a few times the pulsing sleep light at the front of the Mac goes solid but nothing appears on the external display. If I open the MacBook Pro the solid light goes out but the Mac does not respond. If I close the MacBook Pro display, the solid light comes on again. I have no option but to force a restart. This is an intermittent problem. I have yet to have this happen when no external display is connected.

    I have the exact same problem.
    Here's my story:
    To give you some backgroud, my setup involves having the macbook on a mstand hooked up to an external monitor. I run a usb hub from my macbook, this is where my mouse transceiver is plugged in. I use am Apple wireless bluetooth keyboard (latest slim model)
    I recently purchased the 13.3' inch 2.26 MBP as I gave my older 2.0 uMB to a family member. The computer is in the stock configuration with no hardware upgrades.
    I have noticed weird behaviour when waking the computer from sleep when the lid is closed. When i wake the computer up (by tuning on bt keyboard), the keyboard light blinks like there is not bt connection and the computer will wake in an inactive state. The led light will be on, but when i flip the screen up....nothing. Screen is dark, keyboard pressing does not illicit any responses. I have to do a hard reboot by holding down the power button to restart the computer. Unfortunately any previous data or work is lost.
    I work in IT so I completed troubleshooting and also things outlined on forums in google. Reset PRAM, reset SMC and also reinstalled OSX. Still I get the same result. Fearing I purchased a defective unit, I called Apple and they told me i could exchange the computer so I dropped by the apple store and exchanged it quite easily.
    I've spent hours restoring from time machine and I am experiencing the same issue on my new laptop. I'm now assuming its not hardware but more firmware related as I had to do a bluetooth firmaware upgrade when I bought the computer when I checked for software updates.
    Is anyone else having any wake issues with their new MBPs? And what should I do next? Should I exchange for a 3rd unit? Thanks for you help everyone.

  • Late 2008 15 inch Macbook Pro will not detect external projector

    I have a Toshiba projector that I am trying to hook up to my Macbook Pro for a presentation tomorrow. The computer will not detect the display. I'm using a DVI cable connected to the Mini Display Port. I know I've got the projector on the right input as my white Macbook with mini DVI will detect it but not display it properly (all green).
    I've tried shutting down and disconnecting and everything. I need this to work asap.

    Have you checked the screensaver and power settings, sleep display etc in the System Preferences?
    You can throw this mega cocktail at it, see if it cleans up your problem.
    Download the free OnyX here
    http://www.titanium.free.fr/
    Run ALL the maintainence and cleaning aspects, , especially the caches, you can cancel the reboot in between.
    Finially run the Verify > Preference file check/repair and then reboot.
    This should clean out all your caches and whatnot.
    Then look at this support article about resetting the SMC/PRAM
    http://support.apple.com/kb/ht3964
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html

  • Hi, I have a late October 2008 Macbook Pro Unibody which I wanted to use my Magma Expressbox card with. I had a Silver Macbook Pro before which this worked fine with but for some reason my newer Macbook Pro does not even recognize the Expresscard slot?

    Highly anooying as I can't even use the Express Card slot at all, due to the fact the Macbook doesn't even recognize it exists. Has anyone else had this problem. If so, how was it fixed? I only upgraded my Macbook Pro due to the fact Ineeded a better performance but I still need my Expressbox1 to work with my UAD DSP card. If not the buying the new MAcbook was a total waste of money if the Express Card does not even fundtion on it? Please help!!

    Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
    Check to make sure your applications are compatible.
    Application Compatibility
    Applications Compatibility (2)

  • MacBook Pro does not sense external monitor (Panasonic HDTV in my case) via thunderbolt-HDMI connection...Is update 10.8.3 helping anyone?

    My MacBook Pro (newest model in 2013 so far) does not sense external monitor (Panasonic HDTV in my case) via thunderbolt-HDMI connection...Is update 10.8.3 helping anyone else who has this issue? I returned my multiple HDMI adapters after figuring out it had to be an Apple issue n not the adapters so I can't check it myself now.
    Thanks!

    I have late 2012 MBP 13" and connect to my Panasonic Plasma correctly.
    But using the same cable, can't connect to an LG 47LM6200, the MBP detects the TV, the screen blinks blue, but the TV shows "no sinal detected" message.

  • MacBook Pro will not detect external speakers, even though it did yesterday

    I have a MacBook Pro and it is connected to my HDTV via an HDMI cable and adapter. Yesterday my laptop was able to detect the external speakers in the TV and sound was coming out of my tv from my mac. But today my mac isn't detecting the external speakers and no sound is coming out of my tv. I've tried turning things on and off in multiple ways. Unplugging and replugging the HDMI cable/ adapter. Both of the cables are plugged in properly. Whenever I go to System Preferences>Sound>Output my external speakers aren't showing up. This is so annoying, help me please! Thanks.

    I had this problem, too for my 2014 MBP. The output speakers did not show up when I tried to connect through the HDMI port. However, the output speakers did show up when I used an HDMI to Thunderbolt cable.

  • My Macbook pro is not even a month old, do I need a new battery?!

    I bought this laptop THIS month. It started acting up by shutting down with no warning. Just out of nowhere, a black sceen, and when I went to turn it back on, it would struggle to boot up.  I fixed this by resetting the PRAM, and then after that the battery wouldn't hold a charge, and it had to be always plugged it. Resetting the SMC fixed that just fine.  Great, everything is fixed.
    No, it's not.
    the next week, my battery started to say that I should replace it now. I though that was strange, so after restting the SMC again, I started my first ever battery callibration. After the battery was completely drained and I let it sleep for around 6 hours or so, I turned it on and started to charge it and use it, and BAM. Now the battery won't charge. It's only running off of AC power right now, after only 26 cycles.
    I bought a macbook because I though it would be less maintenence than my Thinkpad Edge that had a terrible build quality and messed up system registery. Now I just think I have bad laptop luck.  I don't think I have time to bring it into an Apple store soon because I'm at a University and its almost finals week... please help

    the best thing for your to do - since it's only a month old is to take it to Apple and have them look at it for you.
    it's under warranty - take advantage of it.
    one more thing - never - ever - try to calibrate your battery or let it get fully discharge - not sure who told you to do this but it's a bad idea on macbooks with built in batteries.  as you can see from what you're experiencing right now.
    good luck and hopefully you get it sorted out.
    Portables with built-in batteries
    Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
    MacBook 
    MacBook (13-inch, Late 2009) and later
    MacBook Air
    MacBook Air (all models)
    MacBook Pro
    MacBook Pro with Retina display (all models)
    MacBook Pro (13-inch, Mid 2009) and later
    MacBook Pro (15-inch, Mid 2009) and later
    MacBook Pro (17-inch, Early 2009) and later

  • Why does my Macbook Pro battery not even last me 2 hours even just browsing the internet or typing a document?

    So my Macbook Pro 2011 that isn't even a year and a half old only lasts me about 2 hours of battery.  My brightness is set to only 4 notches most of the time and I mostly have google chrome and itunes or spotify open when I am using it.  I have to charge it about 2 times a day.  My old original unibody macbook lasted a longer time than this.  Today, my fans were running faster than normal and my battery drained 20 percent in less than a half hour. 
    Here is all of my battery/power info:
    Battery Information:
      Model Information:
      Serial Number:          xxxxxxxxxxxxxxxxxxx
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          406
      Hardware Revision:          2
      Cell Revision:          158
      Charge Information:
      Charge Remaining (mAh):          2545
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          6147
      Health Information:
      Cycle Count:          371
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -2085
      Voltage (mV):          11092
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          25
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Display Sleep Uses Dim:          Yes
      GPUSwitch:          2
      PrioritizeNetworkReachabilityOverSleep:          0
      RestartAfterKernelPanic:          157680000
      Standby Delay:          4200
      Standby Enabled:          0
      Battery Power:
      System Sleep Timer (Minutes):          20
      Disk Sleep Timer (Minutes):          0
      Display Sleep Timer (Minutes):          15
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      GPUSwitch:          2
      Reduce Brightness:          Yes
      RestartAfterKernelPanic:          157680000
      Standby Delay:          4200
      Standby Enabled:          0
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No
    Here is all the processes my mac was running today:
    http://pastebin.com/z91Sp3Kk
    I would greatly apprecieate any feedback or help that anyone could give me.  I don't even do processor intensive tasks so I don't know why my battery isn't lasting me more than 2 hours.
    Thank you.

    if you look at this process...
    39484  Shockwave Flash (Chrome P me         53.5     189.5 MB        1.05 GB
    it was using 53.5% of you CPU. Which if used over a long period of time, a lot of battery will be used and it will drain quickly, try figuring out what this is and use it less often, or try deleting it if it is not important.

Maybe you are looking for