Got my new Mac Pro: keyboard / iLife

Today I received my Mac Pro through TNT. I live in Switzerland. Upon opening the box, I realized the box contains the older, white keyboard (instead of the brushed metal version). I assume iLife 06 may be there, in place of iLife 08.
Question: can I ask apple to send me both, or perhaps a discount?

Ned Snowing wrote:
As far as I know everyone buying a Mac Pro gets the older keyboard which is only stadnard for the iMac at this point.
As for iLife, you should find that your MP has Life 08. Start it up, check it out and if you find you have only iLife 06 I would then contact AppleCare then. Additionally, be sure to check the media you have in the box as it should have iLife 08 somewhere there.
Thanks, keyboard question cleared. Regarding iLIfe 08, so far I've seen 2 Install discs in th black box. I've yet to unpack and plug the beast.

Similar Messages

Just got a new mac pro and can't manage to set a password and keep it. It keeps telling me I have the wrong password.

Just got a new mac pro and can't manage to set a password and keep it. It keeps telling me I have the wrong password. I want to start over and I can't even get back in to do this bc it won't take any of my passwords. How can I start over completely?

You got a new laptop? try asking there or in Lion forum.
If it has Lion, use the Recovery Mode boot Command-R
Use that to erase and reinstall - it has network install ability.
Want MacBook Pro forum or Lion Community?
MacBook Pro
Lion Mac OS X Communities
New, as in from Apple, it would have asked for full setup.
Want to reset the password? (it is used then I'd wipe it clean and start over)
How to run the Password Reset utility in OS X 10.7 Lion

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

I just got a New Mac pro--wanted to partition..DVD install disc says error.

I just got the new mac out of the box...Partitioned it and installed software. DVD 1 worked good..when it asked for dvd 2...it says error. I cleaned the DVD and tried it again. Same problem. I put it in my power mac to see if it would read it..and it does. Your thoughts?

i contacted apple..and they are sending me out a new DVD of disc 2. It was the internal drive i was using to install.

Got a new Mac Pro 2008 - need to install an Airport card

Hello all,
To ensure quickest delivery I opted for the standard config new Mac Pro 8 core (early 2008). I did the same with my G5 4 years ago an installed an Airport Extreme card (with some difficulty !). Apparently the card in my G5 is not compatible with the Mac Pro. I cannot find any official reference to installing an Airport Extreme card in a Mac Pro…just a couple of 'hacks'. Apparently Apple doesn't want users to do this anymore.
Q1/ What card do I need ?
Q2/ I see 3 antenna connections labelled 1, 2 and 3 on the cables. One is for Bluetooth apparently…but which one ?
Would very much appreciate any help.
thanks in advance
PA

kura,
I ordered my Mac Pro with standard conf for the same reasons you did. I also discovered, as you did, that the newest Mac Pro required a different airport card and that installing the card doesn't appear to be user-friendly. I since found the following web site which presented installation procedure:
http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/
I also was able to order the correct card (part number MB363Z/A) through a local Mac reseller although I see that it is available from other sources including Amazon (will ship from J&R).
I ordered the card yesterday but the dealer said that it was in stock and would take a few days to arrive so I have yet to actually install it.
Having installed airport cards on a number of other Macs I've owned, it is baffling that Apple would make this so darned difficult and awkward. In retrospect I should have ordered it as a build and had Apple install it but it is what it is.
Hope this helps -

Just got a new mac pro - flashing question mark and more...

I wonder if anyone can help me solve this problem. i just bought a mac pro, turned it on and a flashing question mark blinked on the screen. i got on my mac book to search apple.com for the problem and it said to boot with the install disk and hold the c key. i did all that and now i cannot take out the disk. i'm still unable to select a startup disk either. i currently have a mac g5 and loved it but it is old am really surprised with having this problem. can anyone help?

If it's new and it does that, it's very likely a loose component. If you feel comfortable doing so, open the case, and make sure that the RAM is firmly seated in its sockets and the drive cables firmly connected to the drives and the circuit board. Also check the power cables to the drives.
Depending on how the computer was handled in transit, these things can get jostled loose, and loose RAM or cabling will give you what you observe.
The other possibility is an outright hardware fault. Though rare, there's always hardware that resides in the tail of the service-life bell-curve due to some manufacturing / material defect. Apple is historically excellent about replacing same. You need to contact AppleCare or bring the unit to an Apple store or authorized repair center.

Hi i just got a new mac pro and i wanted to know how to transfer all my music from my old desktop to my new mac?

hi i just bought the macbook pro and i wanted to know how i can transfer all my music on itunes from my old desktop to my new macbook?

Derek's right. To explain his second point more, you can mount your old Mac's hard drive on your new one and once you've done this you can simply drag your music folder over.
You can mount various ways, if you have a router and both are on your LAN network I believe u use the Go menu in your new Mac to mount your old one.
You can also use a cable directly between the two. I did this years agonwith ethernet but I bet USB or even FireWire is possible.
Once you get your music copied over, you may need to add your music into your Mac's iTunes.
Open iTunes and then select Add to Library and then find your music folder to add. You can add single songs or folders of songs or your entire folder of all songs.

I just got a new mac pro and did not set up a password and now it is asking me for one? what can I do now?

Hi...please help me. I just got a Mac Pro yesterday and did not set up a password at apple now it is asking me for one to download flash player plug in. what can i do?

Shootist007 wrote:
You must of set a password on the computer when you kfirst turned it on. Otherwise you wouldn't be using it.
What I think you are talking about is a user name and password for an Apple ID.
Apple IDs use a email address and a password you create for that email address on Apples website.
There should be a link on whatever page you are on to Create an Apple ID. Click that link.
Or just open App Store from the link on you Dock then Find the link to create an Apple ID.
Absolutely not. You can create a blank password. Yes it's stupid. Yes it's unsafe. But from helping people with their Macs, I find most do not set up a password. <facepalm>

HT203167 got a new mac pro, went to sync in 20 songs from i phone, only one got there. my phone is saying all 20 are on i cloud, any ideas?

I recently had my Dell crash, I had hundreds of songs lost, but did have roughly 30 songs that I had bought on I Tunes on my I Phone. I bought a new Mac Book Pro, went to sync in my I Phone to the MacBook Pro to get those 30 songs. Only one song went through. Any idea of how to get the rest? I know that when I had my I Phone, I repeadately forgot my I Tunes password and had to make new ones, don't know what my username was, I do now. Also, I bought the majority of those songs with a different I Phone than the one I currently have. Any advice would be appreciated, the last four on my credit card is 8514

How exactly was the music transferred to the new computer?
The correct way is to copy the ENTIRE iTunes folder from the old computer to the new computer. If it was transferred properly there are no issues with syncing to the iOS device.

I just got my new Mac Pro and can't seem to connect to my HP6380 printer. Any suggestions?

I

go into printer preferences and try adding it (the little plus sign on the bottom)
I don't know how you have it connected, so I can't offer any specific advice, also, check HP's website for any updated drivers, or run Software update to see if some have already been released
hope this helps
John B

Wireless apple keyboard does not connect to new Mac Pro Late 2013

I just got my new Mac Pro 2013 and I can not connect it to my wireless apple keyboard. I am not able to set up and run the system. Any thoughts? Thanks in advance!

How to reset as Apple wireless keyboard, mouse or trackpad(troubleshooting pairing and other common problems):
http://davemeehan.com/technology/how-to-reset-an-apple-wireless-bluetooth-keyboa rd-mouse-or-trackpad

A brand new Mac Pro doesn't wake up from sleep

I got a new Mac Pro.
It has an external SATA controller and a video card with NVIDIA Quadro 4000 chipset on it.
It has a Snow Leopard installed.
The problem it has is that it doesn't wake up once it goes to sleep, either by choosing "Sleep" menu item or by using "Energy Saving" setting.
I notice some people mention a keyboard doesn't respond while his trackpad does. In my case, nothing works.
I don't know if it is due to keyboard or a magic mouse. I tried to connect another wired mouse to the enclosure of the Mac Pro directly, but it did't cause Mac Pro wake up.
By searching on Google, many people seem to have this problem, whether they have Mac Pro, MacBook Pro, and so on.
Personally, I have a 17" PPC iMac, 13" MacBook with Core Duo 2, and have used MacBook Pro 17", but they didn't have this problem.
I tried to reset the SMC, but it didn't help.
Do anyone know what cause this problem and how to solve it?
Is there any patch for this?
Thank you.

Does it sound like it's waking up but the monitor just doesn't display anything?
I ask because if so, I'm experiencing the same problem. I have a Quad-Core Mac Pro (no external devices) and if it goes to sleep I have difficulty getting it to display anything on the monitor after waking it up. Now, I just recently hooked up an additional monitor (VGA) for dual display, and the funny thing is, that monitor will wake, but my main monitor won't.
Sometimes I get this error after boot-up too, where the computer will get to the login screen, but my main monitor is receiving no signal ("at least according to my monitor").
If that's the same issue, then I'll post any success I find for you!
Best,
J

IPod won't mount on new Mac Pro

I just got a new Mac Pro that came with Snow Leopard. After getting everything setup I plugged in my iPod shuffle and it won't mount when plugged into either of the 2 front USB ports or any of the 3 back USB ports. When I plug it into the USB port on the keyboard it mounts and I can sync it through iTunes. When plugged into the front two ports the green charging light comes on, but it doesn't mount. The back 3 ports just cause the iPod to blink the green charging light quickly, it isn't a solid green.
I don't know if this is a Snow Leopard problem or the Mac Pro. The iPod was working perfectly with my G5 running Leopard.
Any ideas?
david.

I just don't get computers sometimes (even after being a software developer for over 25 years).
I had restarted the computer multiple times while installing other software but the iPod would not mount.
I took your suggestion to try another USB device and the only other device I had was a Canon scanner. I installed the drivers which required another restart. And the scanner worked and now the iPod works on all of the USB ports. It is mounted in iTunes and I can sync it on any port.
I checked the console logs files and didn't find anything unusual before it didn't work and nothing different now that the iPod mounts.
David.

Installed my logic 9.0.0 on my new mac pro, updated it to 9.1.5, it accepts my serial, but then asks me for an "original serial" that I don't have..? What should I do ?

Please Help !
I bought Logic studio, with logic pro 9.0.0 last year, worked perfectly on my macbook pro.
Just got a new mac pro, with macos 10.7 Lion.. I install the software, serial works,
then I update the software,because 9.0.0 can't open in os 10.7, and after accepting my serial,
it asks me for an "original serial" that I have no idea about..
sry for the english..
Please HELP, I cant survive without logic more than an hour !

I think this is a known problem with Lion and some installs of Logic, I've seen it mentioned before.
Contact Apple.
Here is a related thread.
https://discussions.apple.com/thread/3218471?start=0&tstart=0

Two questions about my new Mac Pro

Just got my new Mac Pro up and running and have two questions (issues)
First, I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right? It's no big deal to have to turn it on at the computer itself, just wondering if anybody else is having this happen.
Also, the audio out at the back of the computer doesn't work. I've tried plugging in my speaker as well as my headset and nothing. If I plug either of those into the headset jack in the front of the computer all is well. Any thoughts?
Otherwise, I sure do love my Mac Pro!
Thanks.
jamie

I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right?
ADC has pins for power control and the power light. DVI does not have these signals so the display's power button cannot turn on the computer when used with a DVI to ADC adapter.

Got my new Mac Pro: keyboard / iLife

Similar Messages

Maybe you are looking for