Got new. 4s today and it won't send or revive texts and also anyone that calls me comes up as unknown
Can anyone help
Try going to Settings > Messages and turn iMessages On. Also your receive at setting is correct.
As for calls coming up as unknown, does your carrier support caller ID? Does the phone number of the caller appear? If so, make sure that phone number is associated with one of you contacts.
Similar Messages
-
My phone won't send or receive texts. Does anyone know why?
Does anyone know why my phone won't send or receive texts? I've updated my phone numerous times.
Settings > General > Reset > Reset Network Settings.
Beyond that, SMS is a carrier feature. Contact the carrier to troubleshoot. -
Got new iphone today and it worked for a little while now no service
i got my boyfriend an iphone 3 and synced it and it was working fine. We put my boyfriends sim in it, and called ATT and had them change his data package to the iphone package and registered his IMEI and sim. that was about 1 pm, no he can't even recieve or make calls or texts. it says it has no service and att is saying that Itunes shut the phone down? does anyone know anything about this or can they help me? do I have to totally wipe the phone and start over again?
No one from Apple has the ability to suspend your cell service. much less "shut the phone down". Contact AT&T and verify that they have the correct IMEI and ICCID numbers in their system.
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number: http://support.apple.com/kb/HT4061 -
Have had an ipad mini for 6 months and it has been connecting perfectly to the home wifi but it has just stopped connecting this evening and all other devices seem to be OK.
Just got a new iphone today and wonder if that has had an effect but that is connecting OK as is my laptop.
Any help would be appreciatedProblem was fixed by rebooting the ipadmini using on/off switch on the side of the ipad
Got the advice from a related previous discussion -
TS3406 Help my iphone won't send or receive texts!
I have just purchased a new iphone 5s however it won't send or receive texts?? I can make and receive calls and the internet is working fine, any one got any suggestions how to fix it? Thanks
Are you trying to use actual SMS with non-iOS devices. If so, SMS is a carrier funcation and you would need to contact your carrier. If you are trying to connect to iOS devices, that is an iMessage, and you would need to go to Settings>Messages and see if iMessage is turned on and activated.
-
It got A new router today and wanted to turn on apple tv but my remote app on iPad and iPhone will not recognize apple tv. Btw- I do not have apple tv remote.
It reboots it but unplugging can also rectify communication issues like this. A restore would be the next step.
-
Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help
Hi there Clairemcaula,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
-Griff W. -
I got my new laptop today and my music is missing though it's still on my ipod. How do I get it all back on m computer?
The iPhone is not a backup device. Did you not back up your computer?
If the music was purchased from the iTunes store, you can re-download it without charge. Otherwise, you will need to invest in 3rd party software to try and extract it from the phone. -
I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some are now also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?
Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.
-
got my iphone5 today and its not letting me text or phone or use the internet on it. is there an amount of time i am meant to leave it until i will be able to use this as a phone!
What did your carrier say when you contacted them about the problem?
-
I just got new ipad mini....I want to delete all of the music that was synced from my itunes account. I have went through and deleted some songs one by one but some have a cloud icon with a red arrow on them.....is there a simple way just to delete them?
Yes there is. Those songs are not actually on your iPad. They are in iCloud ready for download if you choose to do so. If you want to remove them go to Settings>iTunes & App Store>Show All>Music>Off. You can also do this in Settings>Music>Show All Music>Off.
-
Just got new iPad mini and I can only get 140 pictutes in My Photo Stream while in my other devices I have 1000 photos in My Photo Stream. How do I sync to have all photos in My Photo Stream on this new iPad mini?
Hi Jose Sam,
It sounds like some of your photos are over 30 days old.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
I see different photos in My Photo Stream on each of my devices.
Your device will keep up to 1000 photos, even if they are older than 30 days. Photos older than 30 days are removed from the iCloud server, so all devices may not have the same photos, depending on when you enabled My Photo Stream.
You may want to sync the older photos through iTunes to get them on your new iPad mini.
Thank you for visiting Apple Support Communities.
Nubz -
I got a new iPad mini and It said that I didn't have anything in my iCloud backup but I had all 800 of my pictures on it. How do I get them back?
The new one must have been in inventory for a while or it would have the latest iOS.
To update it, connect it to your computer and open iTunes. You may be prompted by iTunes that a newer version is available; if so, choose Download and Install to update it to iOS 6.1.3.
If you don't get this prompt, click on the name of your phone in iTunes, then click on the Summary tab at the top. On the Summary tab, click Check for Update. You should then be prompted that there is an update available and you can update your iPad.
After updating, as mentioned in the posts above, set it up as a new iPad, eject it from iTunes and disconnect it from your computer, then go to Settings>General>Reset, tap Erase All Content and Settings, go back through the setup screens on the iPad and when given the option, choose Restore from iCloud Backup. You should now be able to choose your backup to restore from. Be sure your iPad is connected to wifi and your charger as this may take some time to finish. -
i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?
Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern -
i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern
Maybe you are looking for
-
Hi all, Iam new to sap basis . Today i created the New client as 201 by logging as on 000 client as a user sap* and when i went to copy sap_cust data from source of 000 client by logging as a 201 client , then i got problem as follow's Status
-
Can't get the itunes version 8 to uninstall the older version
Does anybody know how to get around uninstalling the older version of itunes so that the version 8 will install?
-
Passing data to external system
Hi all, Please let me know if anyone faced this type of problem. Here i explined what is the issue exactly. 1)i am getting unit of measurement "c (degree celsius) in the result character structure in BAPI function module. 2) when ever passing these v
-
Photos Don't fill the paper HP Printer
I want to print a 4.6 Print using a HP c310e Printer. All I get is this: Apparent there is no way to set page orentation. All 4x6 prints should be landscape not portriat there is no way to adjust to fill the screen. iPhoto 9.5.1
-
MaxL statement for substitution variables
Hi,I'm trying get a script together that changes all my substitution variables, and I'm able to do this using:alter database application.database set variable string;but how do I set the substitution variables for (all apps) and (all dbs)?Any help ap