Got new router but can't connect to printer on ipad or mac

can't find air printer on ipad or mac since we got new router but were connected to router and wiifi on

Have you tried connecting to wifi, if you cant get those apps or facebook than most likely you are not connected to wifi. Please turn on your wifi connection button in your settings. Look for the a certain wifi and type in pass code and hopefully you should have those apps.

Similar Messages

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

  • HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

    I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
    Thanks,
    Ivette

    You would need to get the IP address of your printer then manually add a network print queue.
    To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

  • I have an wireless printer and a new wifi router. I have set the printer and iPhone / iPad correctly to the new router but when i try to print it won't recognise the air printer. Help. All was working fine on my old router

    I Have a new wifi router and have set up my iPad / iPhone and wireless printer correctly  to the new router but I can't print from the iPad and iPhone. It keeps saying ' no AirPrint printer found'. Help please!

    Start with the most basic thing that you can try. Unplug the router from power for about 30 seconds, and restart the printer and the iPad and plug the router back into power.

  • New router and can not connect wirelessly

    Installed a new router that changed my security from a WEP to a WPA2. I have connected to the printer(7410) through ethernet cable and changed the security settings but the printer will not connect to my router. I am currently printing by ethernet cable hooked directly into the router. When i try to use the printer interface to cinnect to router the only option that comes up is WEP. 
    Any ideas?
    This question was solved.
    View Solution.

    The printer will support WPA, but not WPA2.  It may have previously been connected to WEP and is expecting that.  Let's reset it:
    From the front of hte printer: Setup > Network > Restore Network Defaults.  Now try the Wireless Setup Wizard from that same Network menu.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Got new iPhone but can't install iTunes

    I purchased a new iPhone 4 yesterday and thought it would be easy to set up but for some reason I can't install iTunes on my laptop. I can down load the iTunes setup.exe but when it comes to install it, it gets about half way through and it comes up with the error 'Could not access network location %APPDATA%/'. Does anyone have any suggestions on how to overcome this problem. Any help would be greatly appreciated. Many thanks, Fifi.

    it gets about half way through and it comes up with the error 'Could not access network location %APPDATA%/'.
    With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
    [You receive an "Error 1606" error message when you try to install or remove a Microsoft program|http://support.microsoft.com/kb/886549]

  • IPod touch recognizes Wireless Router, But Can't Connect To Internet.

    Hello everyone,
    My iPod Touch 3rd Gen 3.1.2 recognizes the router and connects to it, but no WiFi meter is showing (the one at the top left corner near "iPod")
    15 minutes after I had been using the internet on my iPod touch 2G, I find that my iPod's WiFi connection was disconnected. At first I thought this was a router/modem problem, but I am able to use WiFi through all my computers at home. I tried forgetting the network, resetting my router, and resetting the network settings, but the results are the same.
    When I go to Settings>Wi-Fi>[more router options] , the iPod does not show any IP address or subnet mask or router info. But there is a checkmark right next to my router's name.
    When I try going to Safari, it gives me a "cannot open page" error: "Operation could not be completed. Invalid argument."
    I am using a Linksys WRT310N under WPA2 encryption.
    Please help!
    Thank you
    Message was edited by: wjose7890

    Nevermind. For some odd reason, it decides to work again a couple of hours later. Really weird, but at least it's working fine now.

  • HT204053 Have just got iPhone 4S but can not face time to iPad please help

    HAve just got iPhone 4S but can not face time to my iPad please help

    Do you see your Outlook calendar on the iCloud website?
    Do you see your iCloud calendar on your iPhone?
    This Apple article is a good place to start -> iCloud: Troubleshooting iCloud Calendar

  • Now in iCloud with new iMac. Can't get mail on my iPad now

    Now in iCloud with new iMac but can't get email on my iPad. How to install?

    Ummm... Settings --> iCloud

  • Just got a new Airport Express to replace an old ond that dropped off a lot. Works great with various Apple and Androids but Win 8 computer sees the network but can't connect.

    Just got a new Airport Express to replace an old one that dropped off all the time. The new one works with various Apple and Android devices but will not connect to Wen 8 computer. The computer sees the network but can't connect.

    Hello lucky3480;
    I don't know what else to do. I'm thinking of possibly returning the unit and purchasing a wireless internet card to install in the tower. Any help you can provide would be great. Even suggesting a good wireless card at this point
    Well it looks like you're not having any luck at all with this AX set up but please don't give on it just yet, it's a good choice for extending your Network. Your on the right path, just going backwards and in the wrong direction. You'll learn a lot about stuff this way but may lead to other issues.
    Before I continue, let me know if you have returned the AX or still need help. Here's a link to Apple's PDF about [Designing AirPort Networks|http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf] Click on it to open in Safari but then save it to your desktop. Now open it from your desktop and start reading Chapter 3, page 42.
    Later...
    Buzz

  • Can connect to router but can't access internet on some devices

    Hello everyone,
    I'm fairly good with comptuers / networking but this issue has me baffled. Help would be greatly appreciated.
    I have a linksys router (WRK54G) and have 2 desktops and 2 laptops connected to it wirelessly at the moment. I bought 3 smart phones (AT&T Tilts) and a new laptop recently. I don't use encryption but I do have MAC address filtering enabled.
    The issue is that 1 of the smart phones can connect to the network and the internet, but the other 2 phones and the laptop can connect to the network but not the internet.
    I did add their MAC addresses to the "allow" list ofcourse, which is why they're able to connect to the internet. DHCP is enabled, and these devices get an IP address. I can see them as connected when i log in to my router as well through one of my other computers (I see the MAC address and the IP assigned to those devices) so I know they're properly connected to the network. However, when i try to pull up a website (using either its ip or its domain name), the devices try to open up the page but eventually give me a "The page cannot be displayed or downloaded because the connection was lost" on the pocket PCs, and a generic "page cannot be found" on the laptop. I don't see these requests in the outgoing log table of the router either... I'm supposed to see them as when i use one of my desktops, I can see which site was accessed by which IP.
    So basically, the requests from 2 smart phones and 1 laptop aren't even getting to the router apparently. What could be wrong? These devices can access the internet on other routers elsewhere at my workplace or at wi-fi spots.. just not at home, which is a major inconvenience. Why would the router be stopping some devices from connecting to the internet and allowing others? I know it's not a setting in the devices as it can access the internet through other wi-fi spots elsewhere..
    Help will be truly appreciated.

    Hi, I'm just getting up to speed on wireless but here's some info. Don't have a clue for your phones tho.
    If you can connect to your network and talk to each other but can't connect to the internet, then it's an "Authorization" problem. I'ts not a Router "hardware" problem because your other equipment can connect to the internet (modem). It's not a Wireless card "hardware" problem on your laptop because you can connect to your network (router).
    You say the Router sees the laptop/phones IP#'s but, do you see the IP#'s ON the computer/phones that can't get online? The Router sees them but do they see the Router?
    The computers can talk to each other because your using the "Switched hub"(and wireless) part of the Router. I't doesnt do any translating, it just tells computer 1 that computer 2 want's to talk to it.
    Is the Shared Key enabled on one and not the others?(Router menu)
    If you can connect at work but not at home then again it's an Authorization problem. You have the right password, setup, etc, for work but not at home. "Hotspots" have no encryption so any one can connect. Do you have the home Router set up as WEP and and Work as WPA? Does your other laptop connect at work also? Do you have a mixed B,G,N band system at home. The Router has to be set at the band your using or have it set for mixed. If it's set for "G" only then any items that have B"or"N" won't be able to talk to it. If i go to a wireless motel thats next to a truck stop and a wireless Cafe, i can "SEE" a good half dozen "networks". I can even connect to a few of them, but, i can't get online because i don't have the password, etc..
    Well one more kinda, sorta, possibility, did you lower the "Maximum number of DHCP Users" count to 4 (Router menu) and forget to raise it to 8 or what ever you have now? If you only had 3 computers on, then the Router would only hand out one more IP# so the other phones and laptop wouldn't get any more. It's defaulted to like, 20+ or so, so probably unlikely.
    The First phone seems to be the magic bullet. My only suggestion would be to double check the settings and compare everything. You have got to be close.
    I hope this get's you nearer,,

  • We have had to change to a new router but the Macbook Pro still reverts to the old router.  How can this new one be made the default?

    We have had to change to a new router but the Macbook Pro still reverts to the old one. How can we lose this and make the new router the default?

    Go to "Network" under system preferences and choose "advanced"
    On the Wi-Fi tab you can sort the sequence of the preferred connections.
    Then just move your new router to the top of the list.

  • I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

    I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

    You would get better response from the iTunes community forum.
    Have a nice day!

  • HT4946 i got my new iPhone 5 and i connected it to my iTunes on mac and it ask me if i want to setup as new iPhone or restore backup and i restore back up but now i want to delete backup and set up as new iPhone, is the anyhow?

    i got my new iPhone 5 and i connected it to my iTunes on mac and it ask me if i want to setup as new iPhone or restore backup and i restore back up but now i want to delete backup and set up as new iPhone, is the anyhow?

    The iCloud backup includes most things except non-iTunes purchased but the iTunes backup does not include those either. For what iCloud includes see:
    iCloud: iCloud storage and backup overview

  • Hi there can anyone help me out.  I have Apple TV and I am trying to connect wirelessly through a zyxel wireless hotspot gateway, I know a tad extreme but a friend had one free,  anyway I can find the router but no Internet connection?

    Hi there can anyone help me out.  I have Apple TV and I am trying to connect wirelessly through a zyxel wireless hotspot gateway, I know a tad extreme but a friend had one free,  anyway I can find the router but no Internet connection?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

Maybe you are looking for

  • Pro*C/C++ problem

    I'm just trying to get Pro*C/C++ to work using VC++ on an NT platform (This is my first shot at Pro*C/C++). I can get the code to pre-compile , compile, and link but when I attempt to connect to the database I get an Access Violation in SQLLIB80.dll

  • SAP BI4 SP2 Patch 7 Webi Connection to BW Best Practice

    We are working with the version 4.0 SP 2 patch 7 of  BI4 and developing some reports with WEBI and we are wondering about wich is the best method to access to BW Data. At the moment we are using BICS because read in no few places that this is the bes

  • I cannot print, I get the message "The printer is busy".

    Suddenly I am having trouble printing. I have an HP Photosmart printer hanging off my router, and out of the blue the printer was offline. I've this trouble in Windows but never on the Mac. I deleted the printer, and added it. When adding the new pri

  • Passing Parameters In OEM

    Oracle RDBMS 9.2.0.3 IA 9.2.0.3 OMS 9.2.0.3 OEM 9.2.0.1 In OEM I am creating a job to execute a PL/SQL procedure which needs to take two parameters. If I were to run the PL/SQL proc from a SQL Plus prompt I would type: exec REPORTS('September', '2003

  • Server 2008 Cluster - OSX 10.5.5

    Hi I am creating a Windows Server 2008 HA filesystem cluster which has been setup and is working perfectly. I have a OSX 10.5.5 build laptop running and trying to access the shares on the cluster. It can successfully ping/see/connect to the cluster a