Got "Not enough render area" while generating report
I got the error "Not enough render area" while generating the report. I try to increase the paper size ,it works in word preview but not in the server. Is there any has resolved this kind of problem? Thanks in advance.
You are in the latest version of BIP-EE
i think, you will have to increase the size of the page-size or see the template.
Similar Messages
-
I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
An error occurred while generating report:
Object reference not set to an instance of an object.
Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
those circumstances.
I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.> Since I have to go through Edit to see the settings, and peruse the
> entire massive folder of settings to try to identify the bad one, it has
> been slow-going and I haven't found it yet.
You can filter ADM templates to show configured ones only, and you can
use the "show all settings" node. This will speed the work up - a little
bit at least :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Hi ,
I am facing 1 problem while generating Report.
I am trying to generate a report based on one Users global attribute.
I have customized the USER UI CONFIG and Uer Report task to generate a report like this.
I created a new report to generate report and in that report I have given the condition as that attribute equals to some value "true" / "False".
But there are some users who has this attribute value as true and whose accounts are not properly created in a resource LDAP So this User view is containing some error.
Hence when I try to run the newly created report as it tries to iterate on the user objects whose view is containg some errors ,the report is not properly getting generated and giving exception as error in calling the method getResourceobjects on LDAP.
What can I do now ? What is the alternative for me? I want to generate the report on that attribute only.....
It is very urgent for me and Can anyone please help me out....
it would be so great if there is any immediate reponse for this.>
... ORA-00932: inconsistent datatypes: expected DATE got NUMBER ...
>
I believe the above error message is very descriptive.
HTH
Srini -
Ibot to PDF Error: Not enough rendering area (SOLVED)
FYI
Problema:
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: Error while executing PDFRpcCall.processMessage
oracle.apps.xdo.template.fo.area.NoAvailableAreaException: Not enough rendering area. Please look into the incomplete output file for cause.
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.x..............
....... at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
at oracle.apps.xdo.template.fo.FOProcessingEngine.process(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at com.siebel.analytics.web.javahostrpccalls.xmlp.XmlpAbstractRpcCall.processMessageInternal(XmlpAbstractRpcCall.java:70)
at com.siebel.analytics.javahst.AbstractRpcCall.processMessage(AbstractRpcCall.java:107)
at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:175)
at com.siebel.analytics.javahost.Listener$Job.run(Listener.java:223)
at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:205)
at com.siebel.analytics.javahost.standalone.SAJobManagerImpl$1.run(SAJobManagerImpl.java:153)
at java.lang.Thread.run(Thread.java:619)
Causa:
E' stata inserita un immagine nel PDF stampato con una dimensione superiore all'area di stampa
Soluzione:
Ridurre la dimensione dell'immagine da stampare nel PDFHi, so you inserted an image to your report, but it was too large to print it to pdf? So the solution is to resize the image? Or what?
Ciao! -
FREC Error while Generating Reports in Quality Center
Hi,
We usually generate reports using Dashboard module of Quality Center . While generating reports on a particular PC, we are getting the following error.
The SQL Query <sheet1> has failed to run, with the following error:
Returned Result is not valid FREC.
We are able to generate the same report on a different PC.
Does anyone encounter this issue earlier? Could someone help us out in solving this issue.Issue popped up with me a few times and seemingly uncontrolled.
I resolved one query with replacing quotes in the string i.e. replace single with double by replace([field],chr(39),chr(34)) -
I'm using "Oracle BI Publisher Template Builder for Word"
Version: 10.1.3.2.1 Build 87
When I try to add <?start:body?> and <?end body?> tags get error in preview to pdf
My structure is:
for-each G_INVOICE
[TABLE WITH HEADER INFORMATION]
<?start:body?>
[for-each G_DISTRIBUTION_LINE
TABLE WITH DISTRIBUTION LINES INFO
end G_DISTRIBUTION_LINE]
<?end body?>
"text for special instructions"
end G_INVOICE
The log generated is:
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: Z:\projects\AEROSTAR\reports\AERO - AP - Disbursal Request\AEROAPDISREQ.xml
FOProcessor setLocale: en-us
oracle.apps.xdo.template.fo.area.NoAvailableAreaException: Not enough rendering area. Please look into the incomplete output file for cause.
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.createNewPage(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.startLayout(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.run(Unknown Source)
at oracle.apps.xdo.template.fo.FOHandler.endElement(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTHandler$EEEntry.sendEvent(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTMerger.startElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
at oracle.apps.xdo.template.fo.FOProcessingEngine.process(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at RTF2PDF.runRTFto(RTF2PDF.java:632)
at RTF2PDF.runXDO(RTF2PDF.java:466)
at RTF2PDF.main(RTF2PDF.java:254)
Please, Need help.
Thanks in advance.The cause for this seems to be that a row in a table is larger than a page, and there is no place left for the Header row.
Check the bellow action plan:
1. Edit the template in MS Word.
2. Click on the table.
3. Right click on the little crossed square in the upper right corner of the table.
4. Click on 'Table Properties' / tab 'ROW'.
5. Look at all rows by using the button 'Next Row'.
6. If 'Repeat as Header at the top of each page' is checked, please uncheck it.
7. Save the template and retry.
BR,
Alex -
Deadlock with thread issues while generating reports with Crystal Report XI
We are facing deadlock with thread issues while generating report with Crystal Report XI
Version Number is 11.0 and the database used is Oracle
In the log file on line number 74350 by 2008/12/16 13:35:54 there is a dead lock with Thread: u20184u2019 is waiting to acquire lock for 'com.crystaldecisions.reports.queryengine.av@15214b9' which is held by the Thread: '0'.
And a dead lock with Thread: u20180u2019 is waiting to acquire lock for 'com.crystaldecisions.reports.queryengine.av@15214b9' which is held by the Thread: '4'.
Exactly after 10 minutes we can see the thread 4 and 0 are declared as STUCK by 2008/12/16 13:45:54 .
Is this an existing issue with Crystal Report?
Is there some solution for this problem?
THE LOG FILE INFORMATION IS GIVEN BELOW
[deadlocked thread] [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)':
Thread '[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'' is waiting to acquire lock 'com.crystaldecisions.reports.queryengine.av@15214b9' that is held by thread '[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)''
Stack trace:
com.crystaldecisions.reports.queryengine.av.V(Unknown Source)
com.crystaldecisions.reports.queryengine.av.do(Unknown Source)
com.crystaldecisions.reports.queryengine.as.if(Unknown Source)
com.crystaldecisions.reports.reportdefinition.datainterface.j.c(Unknown Source)
com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source)
com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source)
com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source)
com.crystaldecisions.reports.common.ab.a(Unknown Source)
com.crystaldecisions.reports.common.ab.if(Unknown Source)
com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source)
com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source)
com.crystaldecisions.reports.reportengineinterface.a.a.b.a(Unknown Source)
com.crystaldecisions.reports.sdk.ReportClientDocument.open(Unknown Source)
com.sysarris.aris.crystalreports.RepServlet.generateReport(RepServlet.java:65)
com.sysarris.aris.crystalreports.RepServlet.doPost(RepServlet.java:40)
javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
[deadlocked thread] [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)':
Thread '[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'' is waiting to acquire lock 'com.crystaldecisions.reports.queryengine.av@12e0415' that is held by thread '[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)''
Stack trace:
com.crystaldecisions.reports.queryengine.av.V(Unknown Source)
com.crystaldecisions.reports.queryengine.av.do(Unknown Source)
com.crystaldecisions.reports.queryengine.as.if(Unknown Source)
com.crystaldecisions.reports.reportdefinition.datainterface.j.c(Unknown Source)
com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source)
com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source)
com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source)
com.crystaldecisions.reports.common.ab.a(Unknown Source)
com.crystaldecisions.reports.common.ab.if(Unknown Source)
com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source)
com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source)
com.crystaldecisions.reports.reportengineinterface.a.a.b.a(Unknown Source)
com.crystaldecisions.reports.sdk.ReportClientDocument.open(Unknown Source)
com.sysarris.aris.crystalreports.RepServlet.generateReport(RepServlet.java:65)
com.sysarris.aris.crystalreports.RepServlet.doPost(RepServlet.java:40)
javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Can you please suggest any work around for this?I'm not referring to Servlet threading issues.
I'll clarify.
You have two threads, both entering ReportClientDocument.open(...) method.
Thread 4 is waiting to acquire 'com.crystaldecisions.reports.queryengine.av@15214b9'
Thread 0 is waiting to acquire ''com.crystaldecisions.reports.queryengine.av@12e0415'
So I'm thinking ??? are they the same objects?
My specific question concerning the ReportClientDocument is that both are calling open - i.e., trying to open a new report. You wouldn't be trying to open different reports using the same ReportClientDocument - so was wondering if you've cached the RCD and trying to open two different reports at the same time on the same instance via different threads.
You'd normally tie a ReportClientDocument instance to a HTTP Session, to ensure each user gets their own copy.
Sincerely,
Ted Ueda -
Error while generating report in RAR
Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DKHello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant -
Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
RajHi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
How to translate the text format while generate report through BI-SERVER.
THAT IS I LIKE TO TRANSLATE EXCEL DOCUMENT FROM ENGLISH LANGUAGE TO VIETNAMESE LANGUAGE WHILE GENERATING REPORT IN BI-server
You mean XL is used as a source here for OBIEE. Whatever is the source you need to implement OBIEE Multilingual functionality. Remember there are four types of Multilingual Support in OBIEE:
- presentation services like Answers, Dashboard links and all
- Catalog like Report Name, Dashboard Names and all
- RPD Externalize Strings to see the subject area in required language
- Data where the reports generated will have data stored in different languages in an extended dimension table.
You require the 4th type here so you need to maintain a extended dimension table in DB which is used in RPD to be picked up by BI server based on language selected(language id)/WEBLANGUAGE system variable
Hope this helps.. -
While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra position and also pdf generated from this word file also contains the same.
-
Not enough rendering area error
I am getting this error when i try to preview output as PDF
"Not enough rendering area. Please look into the incomplete output file for cause."
I can preview the output in html,rtf.
Any suggestions?the data being, formatted in PDF , is going out of the rviewport area.
so, increase the page size in RTF template to maximum, this will resolve this error. -
Issue while generating report using web.show_document with https
Hi All,
I am facing some issue while seeing the report using web.show_document as shown below:
https://ucrmskr.apac.nsroot.net:10301/forms/html/001725032_gca.rtf_
In this case the report opens directly without asking for me to save or open or cancel option
whereas if I hit
http://scrmskr.apac.nsroot.net:7801/forms/html/001725032_gca.rtf_
it asks for save or open or cancel option
so that I can save the report to my machine and open in wordpad format
The report generated in the first case is not coming in proper format
Below are my forms.conf mappings:
# Name
# forms.conf - Forms component Apache directives configuration file.
# Purpose
# It should include the weblogic managed server (routing) directives for
# the servers where Forms applications are deployed and other miscellaneous
# Forms component OHS directives.
# Remarks
# This file is included with the OHS configuration under
# $OI/config/OHS/<OHS Node Name>/moduleconf sub-directory.
# virtual mapping for the /forms/html mapping.
RewriteEngine on
RewriteRule ^/forms/html/(..*) /workaroundhtml/$1 [PT]
AliasMatch ^/workaroundhtml/(..*) "/ucrmap1/weblogic/bea/ucrms/config/FormsComponent/forms/html/$1"
RewriteRule ^/ucrms/icons/(..*) "/workaroundicons/$1" [PT]
AliasMatch ^/workaroundicons/(..*) "/ucrmap1/weblogic/bea/ORA_PFRD/forms/java/$1"
RewriteRule ^/forms/help/(..*) "/workaroundhelp/$1" [PT]
AliasMatch ^/workaroundhelp/(..*) "/ucrmap1/ucrrgbg2/help/$1"
<Location /forms>
SetHandler weblogic-handler
WebLogicCluster kauh0079:9001
DynamicServerList OFF
</Location>
Please let me know what needs to be done additionally if we are trying to hit https because in the second case we were hitting http with similar mapping in diff environment and it was generating report successfully.
Regards,
HarishThanks for answering,
I changed the URL from
http://nbotlaguduru.dms.local/export/FMSLaborChargesalcs20060829132645.pdf
to
http://nbotlaguduru.dms.local:8889/export/FMSLaborChargesalcs20060829132645.pdf
and the same problem occured
the file is located on my local C drive in:
C:\lcs\export
seems as though I am missing something else as well
any ideas? -
Safari hangs direct after starting up. Rainbow bol rotates around one hour after which a message is shown: "not enough program memory"
More than 90G free on HD, even removed more files and installed OS and programs again. Nothing helps.
HelpSIG, thanks for your reaction. After reading my question again I understand it was not clear.
The reason I mentioned the 90G free HD space was the information I found on internet about my problem in which it was assumed there was not enough RAM memory and the processor uses the HD for SWAP files?
In any way my problem is still there and I like to add some information:
MACBookPro OSX 10.6.7, 2.4 GHz duo, 4GB DDR3 RAM, L2 cache 3MB, 250 GB HD (90 GB free).
What I have done untill now:
Re-install OSX plus programs
Reboot in safe mode (cold start with shift C pressed)
A number of reports generated after a forced Safari stop were send to Apple. (by the way what are they doing with these? besides not helping me?).
Just today I learned where to find the Safari cache file's which I will empty when I am back from work tonight.
I hope, with this additional information you have some more suggestions. In any way I will come back with the result of emptying the Safari cache.
Maybe you are looking for
-
To activate costing based COPA while Account basedCOPA activated previously
Dear all, I have a client which currently using Account-based COPA which activated 5 years ago. Due to requirement to analyse production variance by variance categories, costing-based COPA needs to be activated. Can anyone tell me whether is it possi
-
Commenting a Template Project File, but how?
This would be really handy (from the Logic Pro 8 User Manual, p. 154): Tip: You can add a descriptive text to your templates by adding a comment to the project file in the Finder. The Templates dialog displays the icon assigned to a template file, ma
-
NTP Server behind CSS / Responses from outside don't get through
I have a CSS and behind it an NTP-Server (simulated for this posting by the ntpdate-command: First, when I use ntpdate -q 128.130.2.7 (with the -q parameter a source-port >1024 is used) all wents fine, I get a response and the flow trace-ip shows: JA
-
Found rust on macbook pro component, can this be removed?
Hi, this is my first time having to post here - thanks in advance for any help. I have noticed a small amount of rust inside my computer directly on top of the component as pictured I purchased the macbook pro 13" refurbished at the end of 2010. This
-
Hi Friends I created a new project with Vb.Net and database of oracle 10g I build the Exe file when i opened for the first time its working fine and second time too but some times its not even logged in getting an below error message VERSION INFORMAT