Got problems when converting video to 640*480 m4v

guys, I got compatibility issues when convert videos to 640*480 h264 m4v.
I tried MepgStreamclip, and the export to mp4 quicktime mov in Quicktime. ALL FAILED.
I followed all these 1.5mbps, 640*480, aac-lc requirements when did the conversion.However, my ipod will not recognize of the files.
I have also noticed that the "Export to Ipod" preset in Quicktime has been changed to 640*480. BUT, what keeps annoying me is the preset is so idiotic!! It ignores the source bps and simply converts everything to 1.5mbps. I got 25mb file after conversion as the source file is 11mb.
Could anyone kindly point out the Right procedure to convert video to ipod format Manually...... I want to have full control when I am doing this.
thanks a lot

any suggestions?

Similar Messages

  • I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

    i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

    i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

  • My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

    My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
    This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
    The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
    What I can do to fix this problem? Thank you.

    I would try using another cable you can likely borrow one to test from somebody
    if it's the same then likely the connector in your iphone have been damaged

  • Hyperlink problem when converting Word to PDF

    Hi everyone.
    I am using Adobe Acrobat 7.0 Standard version 7.1.4 on a Windows 2000 environment.
    I am using Word XP/2002 SP3.
    I have a couple of problems when converting Word to PDF.
    When converting a long link which is in 2 lines, PDF just takes one line into account, not considering the whole link
    When I have hyperlinks that links to a web page, the link works fine in Word but in pdf, it gets the few words after the url address making the link not work.  For example.  I have a hyperlink that http://www.google.com/ and after this I have the words: "This is a sample text".  The hyperlink in pdf would then become http://www.google.comThisisasampletext
    Do you have any ideas how I can correct this?
    Thanks.

    To get the cross references, you have to use Convert to PDF (PDF Maker part of the Acrobat product). However, you first need to go to the print menu and set the printer to the Adobe PDF printer. Close the print menu and then do a reflow and link update of the document (ctrl-A, then F9 I think). This is needed to get the links correct since WORD reflows the document based on the printer (problem with them going to the wrong place).
    Printing to the Adobe PDF printer (the step of print to file is not needed, just print to the printer and the rest is automatic) does not include the links. PDF Maker is a PreProcessor for the Adobe PDF printer that adds PDF Marks to the PS file before it is sent to Distiller (OK, the printer when used normally creates a PS file and then invokes Distiller to complete the process - your steps did with the Adobe PDF printer is the same process done manually).
    Summary:
    1. Fix document after setting the printer to Adobe PDF.
    2. Use PDF Maker (create PDF button)

  • Audio problem when importing video files.

    Hello everyone,
    I just started using FCP X a few days ago for a university project and I seem to encounter an audio problem when importing videos in .mp4, .mov format or via the import from camera option.
    Indeed I need to import videos in .mp4 and .mov format into FCP X. The import in itself is normal I can see my videos into the events/clips library and if I play them from the library I can hear the sound quite perfectly.
    However, when I want to edit my videos and put it in the timeline, there is no audio. As a result I started to think that my videos could be the problem so I tried the option "import from camera" option using the Isight camera of my macbook pro but the same things happened. I could hear the sound from the events/clips library but not from the timeline (I can't see any audiowaves in the timeline).
    I found a solution using quicktime and extracting the audio of the video in .m4a then importing the videos files and the audi files corresponding but it's a long process and a waste of time  as FCP X should be able to import the audio of my video into the timeline directly. Especially if it can read it from events/clips library.
    I hope I explained myself clearly and you could help me resolve my problem.
    Cheers
    Christophe
    PS: I'm using FCP X version 10.0

    Update to 10.0.5.
    You have an incorrect setting when you edit. Try trashing your preferences. Post screen shots of your timeline and toolbar.

  • HT4623 my iphon 4s got problem when i was updating it and screen become black and there is a usb & itone icon on it it dose not work any more ..any feedback about this guys?

    my iphon 4s got problem when i was updating it and screen become black and there is a usb & itone icon on it it dose not work any more ..any feedback about this guys?

    Connect it to iTunes and restore it.

  • No Audio When Converting Videos For iPod

    whenever i convert video files for my ipod they do not have audio. i have tried several programs, and none work. i have read other discussions about this, and found that MPEG Streamclip worked for other people, however whenever i try to convert using this program, it says "Error: Can't Prepare The Movie" Can anyone tell my why i can't convert these videos? i cannot figure it out. thanks alot.

    I am not sure what you mean when you ask what the "compression formats" are.The compression formet refers the manner in which the media was encoded and, by extension, how the media must be decoded. I.e., it determines which codec (encoder/decoder or compressor/decompressor) is to be used with the media file.
    If you can tell me where to find those i could tell you what they are. I can, however, play the video in itunes, quicktime, and MPEG Streamclip.Simnce the files are playable in QT, the most common place to look for codec information is in the "Show Movie Info" window following the "Format:" entry. E.g., it might say:
    Format: MPEG2 muxed, 640 x 480orFormat: Apple MPEG4 Decompressor, 320 x 240, millions
    AAC, Stereo, 48,000 kHz
    i also am not sure if there is audio in the source file.Do you hear any audio when the original file is played? If not and there is no audio track (or "muxed") information, then there may not be any sound for you to convert in the first place.
    how do i find out if it is muxed?If it is "muxed," the format entry we say so. In this case blocks of audio data and blockes of video data are interspersed in a single data stream (track). This is the normal way MPEG-1 and MPEG-2 audio/video data is synchronized. In addition, these formats commonly lose their audio content when converted using QT Pro, iTunes, iMovie, FCE, FCP, or other QT based "frame-to-frame" synchronized workflow. (In the case of MPEG-2 in MPEG Streamclip or QT, the QT MPEG-2 component must also be installed in order to convert the video data alone.)
    most of my videos that won't convert for an ipod are downloaded from the internet. how can i find out if they are corrupted or incomplete?Internet files should always be considered suspect -- especially if they come from a peer-to-peer source. Messages that indicated QT cannot open an otherwise fully compatible QT format is often the best indication that there is a corruption problem or that the files were improperly closed at one point or another.
    most of my videos that won't convert for an ipod are downloaded from the internet. how can i find out if they are corrupted or incomplete?Normally ypu would post them to a web site or FTP storage area and post the URL. If files were downloadedd from a particular web site (e.g., a QT movie trailer), simply post the URL for the particular web page.

  • Problem Importing Converted Videos

    Hello, i have a 30GB ipod and i converted videos to MPEG4 format and put them all in a folder, but when i go into itunes and try to import them, none of them come up. i've tried several times and nothing worked. has anyone else had this problem?

    sorry, forgot about it
    i used A-one video to ipod convertor
    video type:MPEG4
    frame rate:same as input
    video aspect: 4:3
    audio quality: 64 kbps
    sample rate:same as input
    video size: 320 X 240
    video quality: 640
    channels:stereo
    volume:100%
    profile setting:customize(they have presets for this one)

  • Audio delay when converting videos

    hey, sometime when I convert videos using videora I get an audio delay. the last movie I did had probably a 15 sec delay! it was bad! anyone know how to fix it? has anyone had the same problem with like psp converter? maybe I should try that.
    thanks

    I use a program called Ulead Video Studio to convert my videos to mpeg1 format... then when in taht version convert it with videora... i use to have ur same problem and this totaly fixed it for me... i dunno if its alotta work compared to nero but it works

  • No audio when converting video for ipod 3rd generation

    I read a thread that had not be answered regarding video to ipod that ends up with no sound. I wonder if anyone has found the answer to the problem. I have converted movies from imovie 08 and had no problems with sound but when I tried to convert a downloaded music video I only get the video and no sound.
    Anyone have the answer to that one?
    Thanks
    Kevin

    QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos in iTunes to iPod format they only show the video and no sound since iTunes (really QuickTime) is not looking for the audio track within the video track and it gets lost.
    iPod plays video but not audio of some exported files
    http://docs.info.apple.com/article.html?artnum=302588
    One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
    http://www.squared5.com/
    but there are other applications besides MPEG Streamclip you can try as well.
    Frequently asked questions about viewing and syncing video with iTunes and iPod
    http://docs.info.apple.com/article.html?artnum=302758
    The Complete Guide to Converting Video to iPod Format (Mac)
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
    Patrick

  • Seeking problem when the video is replayed?

    Hi all,
    I developed a flv player, I am able to play a video and seek any where in the when the video is played at first
    if I perform seek when the video is replaying NetStream.Play.Stop event is generating and the video is stoped playing
    any work around ?
    Thanks in advance

    I've got the same problem with downloaded ICS Event Reminders.  They will save on local device, iPhone5, but will not sync to iCloud automatically like it should and did in iOS7.  It will sync if you manually modify the Event Reminder in some way after the ICS is saved, but "that's not how any of this works"!
    Even worse for me, downloaded ICS Reminders won't fire an alert on the device it was saved on yet alone sync.
    The Event Reminder shows in the Notification Center, but does not fire Alerts, just sits in the Calendar silently.
    There has to be a bug in the "Add To Calendar" function at the bottom of the save screen.
    I've even emailed myself Event Reminders created with iCal, deleted the Reminder and then saved the ICS from the email.  Won't sync to iCloud and won't fire an Alert for the event.
    Bummer for me and anyone else dependent on saving ICS to iCal.
    iOS 8...just amazing stuff here.
    I suggest filing a bug report with Apple on this apparent bug so it may receive attention and get fixed in the next update.

  • Loosing sound when converting videos??

    hey just wondering if anyone could help -
    i got a 30gb iPod video yesterday, and when i successfully convert a video to mpeg 4 the sound disappears??? its very annoying. a solution would be much appreciated.

    Try using Videora iPod converter.

  • Link problem when converting MS Word to PDF with Acrobat Professional

    Hello all,
    I have the following problem:
    When I have a MS Word document with links to other files inside and I convert it to PDF the links are converted from relative paths to absolute paths.
    The problem is created by Acrobat as the links in the MS Word file are relative (I have checked this by moving the different docs to another directory and confirmed that the links still work after the move).
    How can I make the paths in the PDF relative again? I know there is a plugin from Evermap (and I can confirm this works) but I do not want to use this plugin (=read: spend another $190 dollars) as the license for the Acrobat Professional is expensive enough . Is there a way I can convert the paths within Adobe Acrobat easily? Or better: can I adjust the settings in Acrobat to a new standard when all converted documents contain relative paths?
    Backgroundinfo:
    - Adobe Acrobat 8 Professional
    - Windows XP (SP2)
    - MS Word 2002
    Thanks in advance!
    Bart

    Dear Steve,
    I have tried what u suggested: I put all the documents (word + linked documents) into the same folder on the local-drive (C). Then I recreated the links  in the word document to be sure they were matching. After that I converted the word document to an PDF and confirmed the links were still working in the PDF document.
    Then the biggest challenge: copying the pdf and linked documents to another drive&directory. As you can guess: Unfortunately the links did not work anymore.
    Any other suggestions?
    If I use the Evermap-tool (30 day-trial) I can look at the links and this is how it is 'coded' in the pdf.
    first link: ../../../../test/link_a.pdf
    second link: ../../../../test/link_b.pdf
    and yes this will work if you put the documents in the directory test in the root of the local-drive but not in a different subdirectory.
    Anyone ideas?
    Grtz,
    Bart

  • Problems in converting video in ipod format using quicktime pro...read me!!

    I'm having problems in converting mpeg video with quicktime pro. Tha fact is that after a very long process (more than 1 hour) quicktime crates from the original mpeg file an ipod format .m4v file with no sound at all, just images...
    someone can help, please???
    thanks

    poeple have had the same trouble that you mentioned have you tried this software
    To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
    To get started: http://www.videora.com/en-us/Converter/iPod/
    If you have questions: http://www.videora.com/en-us/Converter/guides.html
    If you have more questions, post them here: http://www.pspvideo9.com/forums/index.php?c=8
    Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
    GFF

  • Problems when converting Office files into forms in Vista

    Hi,
    I recently purchased Adobe Acrobat X Pro but am having a problem when trying to convert office files (word and excel) into forms on  my laptop running Vista.
    I open Acrobat and select create or edit form and get the window to select the file which is fine.
    I then select to import a file from file system which is ok so I browse and select the appropriate file and select next and I get the below error.
    I have tried uninstalling and reinstalling as well as updating but it had no effect.
    I have uninstalled it and installed it on a computer running XP and it all works fine.
    PLEASE HELP!!!!

    Since you seem to be on a 64-bit system, be sure you have updated Acrobat and are not running AA 10.0.0. Can you run PDF Maker (the create PDF button) in WORD?

Maybe you are looking for