Got stuck in guest mode

I was browsing the internet and downloaded video converter on app store, suddenly a message comes up and said i need to restart press the power button then turn it on again. There was no option of canceling the message that popped up. Then so i did restart my macbook pro. Now im stuck in guest mode. Can someone help me? Im really frustrated to get out of guest mode.

no need to post again so soon, give people time: https://discussions.apple.com/message/23333421#23333421

Similar Messages

Switchport Stuck in Guest Mode

I am using 802.1x authentication with multi-domain ports; Phone and PC connected to phone. The phones are Nortel (Avaya) and the PCs are Dell/HP Laptops. All are configured for Certificate authentication and this works well. However we sometimes get some ports stuck in Guest mode. when a non certificated laptop connects to a phone port and fails authentication, the data port is placed in the Guest VLAN. However when the laptop disconnects the port isn't reset and remains in the guest state. When a subsequent good laptop connects and attempts to authenticate the switch ignores this and leaves the data port in the Guest VLAN. Anyone any idea why this happens and how I can overcome it?
The switch is a 2960S with Version 12.2(58)SE2 IOS.
The port is configured as follows:
interface GigabitEthernet1/0/15
description DANS Port
switchport access vlan 1807
switchport mode access
switchport voice vlan 1855
priority-queue out
authentication event fail action authorize vlan 1871
authentication event no-response action authorize vlan 1871
authentication host-mode multi-domain
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 7
dot1x max-reauth-req 10
spanning-tree portfast
service-policy input INGRESS-CLASSIFY
end
The auth status and mac addresses on the port after the failed laptop disconnects are as follows:
sh auth sess inter g1/0/15
            Interface: GigabitEthernet1/0/15
          MAC Address: Unknown
           IP Address: Unknown
            User-Name: UNRESPONSIVE
               Status: Authz Success
               Domain: DATA
       Oper host mode: multi-host
     Oper control dir: both
        Authorized By: Guest Vlan
          Vlan Policy: 1871
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: 0AEF212D000003055C8D1DAC
      Acct Session ID: 0x00000653
               Handle: 0x94000306
Runnable methods list:
       Method   State
       mab      Failed over
       dot1x    Failed over
            Interface: GigabitEthernet1/0/15
          MAC Address: 0022.67cd.0eec
           IP Address: Unknown
            User-Name: RBT18991
               Status: Authz Success
               Domain: VOICE
       Oper host mode: multi-domain
     Oper control dir: both
        Authorized By: Authentication Server
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: 0AEF212D00000026000286D1
      Acct Session ID: 0x00000028
               Handle: 0xFC000027
Runnable methods list:
       Method   State
       mab      Not run
       dot1x    Authc Success
sh mac address-table int g1/0/15
          Mac Address Table
Vlan    Mac Address       Type        Ports
1855    0022.67cd.0eec    STATIC      Gi1/0/15
Total Mac Addresses for this criterion: 1
I placed the AAA, dot1x, eap and auth debug on for all events and then connected a good laptop, the only debug message I got were as follows:
Mar 19 16:17:01.391 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:01.653 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:02.654 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:03.708 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_present: client for mac address 0022.67cd.0eec has been notified on GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_authorized: client for mac address 0022.67cd.0eec is authorized GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_present: client for mac address 0022.67cd.0eec has been notified on GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open autn
Mar 19 16:17:01.391 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:01.653 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:02.654 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:03.708 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_present: client for mac address 0022.67cd.0eec has been notified on GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_authorized: client for mac address 0022.67cd.0eec is authorized GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_present: client for mac address 0022.67cd.0eec has been notified on GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open autn
I would have expected the auth function to have reacted to the EAP packets sent by the good client when it connected and performed eap authentication but it didn't, all it did was say the ports in Guest mode and left the laptop in this VLAN.
All help will be much appreciated.
Thanks,
Paul

Thanks for this reply, although it does provide valuable information for the "Cisco" world it doesn't help me with the problem I have.
The big question is as follows:
Why doesn't the switch react to the EAP packets it gets from the good laptop connected to the port stuck in the Guest state. The port doesn't have a data MAC in its table for the port, only a Voice MAC. It recognises a device has connected as it then places the good laptops MAC in the table BUT it totally ignores the EAP packets from this device and leaves it in the Guest VLAN where the laptop gets a DHCP address once its EAP has timed out.
Completely wrong activity!!!
Is this a bug?
Any help is much appreciated.
Regards,
Paul

HT201263 My iPhone 4 started to update but got stuck in recovery mode. I've tried everything anyone on the website has told me to do, but nothing has worked. Is there anything I can do? I need my phone

My iPhone 4 started to update but got stuck in recovery mode. I've tried everything anyone on the website has told me to do, but nothing has worked. When you go to turn it on, it shows the Apple symbol, then it goes to the connect to iTunes screen. When I do that, it just says error with the code 9006. I've followed what the Apple site has said to do for it, but the phone is still is the same state. Is there anything I can do? I need my phone back as soon as possible.

Hello Hester Emily,
Thanks for using Apple Support Communities.
I'm sorry to hear about the difficulties you're experiencing after this update process. I found the following article that has more information on the iTunes error code 9006:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Take care,
Alex H.

Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?

Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
repeatedly tried from diffierent computers and the same error code pops up (error -1)

That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).

My phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?

my phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?

Read this
http://pathumf.blogspot.com/2011/11/how-to-reboot-stuck-iphone-iphone-4s.html

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

If you didn't back it up, your data is gone. There is no "solution" after the fact.

My iphone 5s got stuck in recovery mode once I updated it to IOS 7.1.2...

my iphone 5s got stuck in recovery mode once I updated it to IOS 7.1.2 and everything I do wont help. What should I do?

Hello NoahLovesYou
Try putting your iPhone into recovery mode and try to restore it again. If it gives you an error while it is restoring in iTunes, check the error against the second article for additional help.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694
Regards,
-Norm G.

I tried upgrading my ipod touch to 1os 6, then it got stuck on recovery mode, saying error 3194

i tried upgrading my ipod touch to 1os 6, then it got stuck on recovery mode, saying there was an error 3194, i went on youtube to search for all the support, i was told to change my hosts file to boot from cydia or something like that, i tried more than 10 times it didnt wor, my itouch is pratically useless now. what can i do?

The following covers the varios error codes included 3194 and 1603
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Also
3194-How do I reset the hosts file back to the default?
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore

Tried to update iPhone 4 to iOS 6 and my phone got stuck in recovery mode. My only option now is to restore my iPhone and lose media. However, I then tried to restore my iPhone and error 1603 occurred. My iPhone is now not working!?!?!

Tried to update iPhone 4 to iOS 6 and my phone got stuck in recovery mode. My only option now is to restore my iPhone and lose media. However, I then tried to restore my iPhone and error 1603 occurred. My iPhone is now not working!?!?!

if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.

My iphone 4 got stuck in DFU mode - Please help

I am a newly registered developer. Tried updating 5.0 beta officially. After done then only i have noticed that i have not registered the device. So phone is not got activated.
1. I have restored to factory setting using DFU mode.
2. Once restored i have restistered the device in apple website with the 40 digit device number
3. Now if i try to upgrade it to 5.0 - geeting an error message and unable to upgrade
4. Stuck in DFU mode and itunes prompts to restore the iphone as it says "it has found the iphone in recovery mode"
Now i have the IOS 5.0 ipsw file and unable to update my phone - Please help.

update not success...shows the device is not compatible with the Software to be updated...error: 3198

My iPad got stuck in accessibility mode. Three finger tap NA

My iPad got stuck on the accessibility mode used to cover up areas that you don't want touched. But when I click three times on the home button times to get out the iPad doesn't respond. While in this mode I cannot turn off my iPad or use any of the buttons. I have to tap home page 3x to go to page where I can turn on/off this mode. Not happening. Battery getting low.

You don't tap three times. You double-tap with three fingers.
If you still can't get out of accessibility mode, try a soft reset. If that doesn't work, try a hard reset. If THAT doesn't work either, try restoring from iTunes.
http://www.ipadastic.com/tutorials/how-to-perform-soft-reset-or-hard-reset-on-ip ad
http://support.apple.com/kb/ht1414

How can i get my bookmarks back, after mozilla crashed and got stuck in safe mode?

I was using mozilla as usual when suddenly it crashed and then my computer turned off. i restarted it and said it had gone into safe mode. i tried to restart the computer again but it was stuck on safe mode.
The bad part is that all my bookmarks are gone and apparently there is no way of getting them back.
please help!

See:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Did you check your hard drive with the chkdsk.exe utility?

The download got stuck in "cancelling" mode. Cant get the try button back..

Tried to try Photoshop CC.. the download got stuck. So pushed the cancel button.. now it says cancelling all the time. Tried reinstalling and but the damn message is still there.. On top of that. I can't sign out!

no need to post again so soon, give people time: https://discussions.apple.com/message/23333421#23333421

Ipad2 got stuck in headphones mode

my ipad 2 got stuck in headphone mode

Just started having same issue. Been on ios6 for a while. Tried a reset and it worked all day. Plugged in overnight and was stuck again in the morning. This is an iPad 2, never use the headphone jack, and has been in an otter box from day one.
Has the same thing on my original iPad, reset fixed it and never happened again.
Is this a common problem?

Default Apple app got stucked in "waiting" mode...

Hi there all, I recently created a problem that I cannot solve on my own so hoping someone else here were able to find the workaround.... As I am quite new with Mac I still did not manage to have the replacement of SyncFolders for iTunes on PC (via Automator actions on Mac) working so I am still trying to add new music folders manually. Yesterday I did, by mistake, add the folder where there were Mac backup files digged deep and it happened that iTunes also added standard Apple "apps" into my app library - those named "Contacts", "Photos", etc. - all of them with blank icon. As I have my iPhones/iPad set to "sync over wifi" and "add downloaded apps automatically", it happened only a few minutes when I realised that my iPad is trying to sync those from library - I have stopped that, deleted all those blank "dummy" apps from my library, but I got stucked with one "app" trying to download on my iPad. Obviously I cannot say which "app" it is - just a blank icon in "waiting" status... I have tried the techniques discribed here in other threads (i.e restarting iPad with power+home button), but as they all refer to standard apps from App Store, none of them solved my problem... Any clue how to get rid off that??? Thanks a lot for any help in advance!!!

Sounds like you are doing something completely unsupported.
Might have better luck posting in the iPad or iTunes for MAC forums. The iPhone forums really isn't the place to discuss iTunes or iPad issues.

Got stuck in guest mode

Similar Messages

Maybe you are looking for