Got syntax error while releasing transport

Hi all,
       we have a requirement that we need to create customer exit variable.
i created method ZBW_ZCM_WEEK12  for the class ZBW_XRSR and collected under the TR.
when i try to release the TR,Its giving an error that
Class ZBW_XRSR Method ZBW_ZC_CURPLUS03 Row 18 Column 6
Large table /BIC/AZSD_D1600: No first field of a table index
in WHERE condition
its showing some other method with error ...
can we tranport only method  ZBW_ZCM_WEEK12 without a class inculded ??

Hello,
Are there any errors when you generate ZBUS100106? Check Goto -> Error List.
regards
Rick Bakker
Hanabi Technology

Similar Messages

  • Error  while releasing Transport which Contain Bussiness object type

    I created the method in ZBUS100106 and  released it and generate it ,then in the program I wrote some code,functionality works fine ,Now  while moving transport to Quality Syestem it shows up with the error
    *ZBUS100106 is inactive*  , I released it and generate it one more time but did'nt help
    My transport has
        Workflow templates
            90000004
        Program
            ZBUS100106
        Business object types
            ZBUS100106
        Table Contents
            SWOTICE
    only problem with the program it shows inactive,I ran Se80 and it shows some Subrutine inactive I activate it by clicking right and select Activate but none of the perform activate .
    Helpful answer rewarded by the deserve points

    Hello,
    Are there any errors when you generate ZBUS100106? Check Goto -> Error List.
    regards
    Rick Bakker
    Hanabi Technology

  • ChaRM: Error while releasing transport

    Hi Team,
    I have configured ChaRM in Sol Man (Sol Man 7.0 EHP1, SP24). When i try to release transport thro ChaRM, i am getting below error.
    No valid TM target found. Message number:/RTC/TMM00154
    Your valuable inputs required
    Thanks
    Kumar

    Hello,
    Perhaps you would like to review this [guide|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089860&_SCENARIO=01100035870000000112&_OBJECT=011000358700000657692007E]
    Regards,
    Paul

  • Error while releasing Transport request number

    Hi Friends,
                       Whenever i release the Transport request from SE01 i am getting the following error. Please view the attached image . Could you please explain about that error ? and how can i prevent it in future ?

    At starting it shows warning like " Your object contains error continue or cancel " but if i proceed with continue after completion of the releasing process it shows (0) successfully completed but not with an error message. As Krishna Chaitanya said i might have used any dependent object. by reading all of your answer i could understand that this is not sever problem. But i would like to understand this process very clearly . All i want to know is
    how to release the request without any inconsistencies?
    and which is the best way, ?
    is there any  requisition before i initiate releasing ?

  • Error while releasing transport request -  Special character "_" in generic

    Hi all,
    we're receiving the error  Special character "_" in generic key  when releasing a best practice transport.
    Note 1304725 describes my error, but the solution cannot be implemented. The reason for this is that we do not have an individual entry for eacht yb_PS,..,
    but we have only one entry where field BWERT has a wildcard '*' as entry.
    Does anyone has  some idea how to solve this ?
    kind regards !

    Hello Bjorn,
    How did you get this solved?
    I'm having nearly the same issue:
    A custom-table with a total key lenght of about 365 characters. As soon as I enter a special character (_) in the key field just before the position 120, the message tk287 rejects the entry. Entering the special character in a key field at about key position
    60, there's no message rejecting the entry.
    Regards

  • Error while releasing transport request

    Hi,
    When i tried to release the transport request, it returning with code = 8 (error) so transport has not done. When I digged into the transport request, error message is
    'unimplemented function REPC_OR_DELETE DOCUMENTATION'.
    Thanks in advance.
    Arvind...

    Hi,
    This is more related to the BASIS side,
    still have found one solution in one of the thread. Still contact you BASIS administrator for it.
    Solution.
    Is the error pointing at TP or R3trans?
    In this phase, we get error coz of r3trans.
    Please try following the note 206168. which tells you to change the r3trans.
    If you have changed the r3trans earlier, then try using the same r3trans as provided in the kernel CD.
    Jayant Sahu

  • Error in releasing transport in XI using CTS+

    I am getting the following error while releasing a transport in XI 7.0 system. Here is the error log
    Full Message Text
    Error occurred during hmi call: CMS -> XI; method = writeChangelistData
    Thrown:
    MESSAGE ID: com.sap.aii.ib.core.transport.api.rb_TransportCsException.UNSUPPORTED_RELEASE_PREFIX
    com.sap.aii.ib.core.transport.api.TransportCsException: Unknown import source prefix XI7_1_XI_CONTENT.tpt99badd10521711dfa213001b78df49b6.tmp
    at com.sap.aii.ib.server.transport.impl.utils.FileUtils.getSerializationReleaseId(FileUtils.java:499)
    at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:715)
    at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importXiStream(InternalTransportServiceImpl.java:500)
    at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importXiStream(TransportServiceImpl.java:265)
    at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:306)
    at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
    at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
    at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
    at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl1_0.process(HmisLocalLocalObjectImpl1_0.java:144)
    at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:291)
    at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:212)
    at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
    at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:507)
    at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:655)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Serialized server exceptions:
    Any help would be appriciable. We already have a message open with SAP and checked various notes and threads to correct the issue but no luck
    Thanks,
    Pankaj

    Hello Bjorn,
    How did you get this solved?
    I'm having nearly the same issue:
    A custom-table with a total key lenght of about 365 characters. As soon as I enter a special character (_) in the key field just before the position 120, the message tk287 rejects the entry. Entering the special character in a key field at about key position
    60, there's no message rejecting the entry.
    Regards

  • Syntax error while creating a standard order

    Hi All,
    I created a projet in CMOD and than added the enhancement  V45A0002.The components shown as EXIT_SAPMV45A_002(Predefined sold to party when making the standard order),i double click on the exit and entered into the function module.After that i double clicked on the include ZXVVZU04 and entered in and wrote E_KUNNR=100171
    While activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite the error .After that i tried to create a order and program terminated error came after entering sold to party no. in sales order
    so now i have deactivated the project which i created in CMOD & deleted it aswell,than also i am getting the syntax error while making the order thru VA01.I want to come out of this please.
    I would be great ful if somebody helps me *** out of this syntax error.
    Thanks
    Rishi

    Hi Rishi
    As you are getting message that "The last statement is not complete (period missing)", check in your assigned project in CMOD the last statement , what is the last statement maintained in that project
    Secondly also check the closing period and the current period. as it is giving in the message that "The last statement is not complete (period missing)".So check the  current period and check the period maintained in the CMOD
    It would be better if you take ABAP'ers help . So  post in ABAP forum
    Regards
    Srinath

  • Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

    Hi friends,
    Error while uploading transport request to the transport directory,
    we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
    for example downloaded all co files and data files
    control file: K900470.SAD and Data file: R900470.SAP from transport directory.
    we are trying to upload the transport to another Sap system
    we have
    Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
    Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
    we tried to add in the import queues using TCODE: STMS and trying to import.
    During import we get the below error:
    HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
    End with rc : 16
    Please help me on this
    We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
    Thanks & Regards
    Murali Papana

    Did you see that you tried to transport to an older release!! You should have expected such a result.
    Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

  • Error while releasing an activity from NWDS

    Hi,
    I am facing the below error while releasing an activity from NWDS - transport view.
    Internal error: the export of SC_CR com.xxx.xxx/xxx_SOFTWARE_COMPONENT#Track_D.118 failed. tcs returncode was 12
    Check in and activate was successfull and in CMS, the activity is shown as activated.
    Please help me to rectify this error.
    Thanks in advance!
    Regards,
    Manchari. N

    Make sure you are connected to NWDI server.
    Also create a new activity for a different component in the same track.
    Below links may be helpful :
    http://wiki.sdn.sap.com/wiki/display/TechTSG/(NWDI)(CMS)PropagationRequestReleaseinTransportViewFails
    NWDI/CBS - release activity in consolidation
    Re: Error on Release of activity (Version set not found!)
    Regards
    Deepak

  • Error while releasing Billing: Assign HD00 (Frieght) Condition type in COPA

    Hi,
    I am getting the below error while releasing billing document.
    Assign condition HD00 type in COPA
    HD00 condition type is frieght condition type
    Is it good thing if we assign this condition type to COPA value field in KE4I? or we should not assign Frieght condition to COPA?
    Please advise
    Thanks
    Kishore

    HI Kishore,
    To which GL account are you posting this freight condition value? Is that GL created as a revenue element (of category '11'/'12')?
    If yes (has to be 'yes', since you are getting the error message), then you don't have a choice but assigning a CO-PA value field in KE4I. The idea here is, if you have created the GL as revenue element, then you intend to take it to Controlling module for further analysis. Thus, making your FI/CO reconciliation easy.
    If you do want to carry this value to CO-PA for analytical reporting then don't create that particular GL (assuming you are posting freight to a separate GL) as a revenue element. That said, it does make sense to carry this value to CO-PA and in your present case, you don't have a choice as the message which you got is an error message, which you can't circumvent.
    Hope this helps.

  • Error while exporting transport requests

    Dears,
    In our PI 7.1 server,configured with CTS +,We are getting below error while exporting transport requests:
    Caused by: com.sap.tc.di.draft.ts.TsExecutionException: Error executing function (check stacktrace for details): EPS_OPEN_OUTPUT_FILE, (service=com.sap.tms)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsServiceException(TmsJCoExceptions.java:74)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.EpsJCoAdapter.openFile(EpsJCoAdapter.java:98)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.AbapEpsOutputStream.open(AbapEpsOutputStream.java:83)
    ... 40 more
    Caused by: com.sap.conn.jco.AbapException: (126) OPEN_FAILED: OPEN_FAILED
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.execute(MiddlewareJavaRfc.java:1492)
    at com.sap.conn.jco.rt.ClientConnection.execute(ClientConnection.java:1065)
    at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:987)
    at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:977)
    at com.sap.conn.jco.rt.AbapFunction.execute(AbapFunction.java:300)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.JCoAdapter.executeFunction(JCoAdapter.java:103)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.EpsJCoAdapter.openFile(EpsJCoAdapter.java:78)
    In SE01 it show tp 12 while releasing request.
    Please suggest.
    Shivam
    Edited by: Shivam Mittal on Mar 16, 2010 1:04 PM

    File Permission Issue.

  • Error while releasing a request.

    Hi All,
    I'm facing an error while releasing a request.
    The request contains an ABAP programs along with two INCLUDDE programs as well as a TCode to run the same.
    It is running successfully in dev. server. But, while releasing ths request it shows me the following error :
    " Object REPT ZBAPI_SD_SERV_SALES_ORDER is inactive " ,
    where ZBAPI_SD_SERV_SALES_ORDER is the program name. When I checked out in ABAP editor it shows the program active.
    But, I'm unable to understand why its showing me an inactivation error.
    Guys, help me out in this.

    Hi,
    Check if the INCLUDE program are also ACTIVE. They must be in inactive state. Try activating them and release the request.
    Regards,
    Vikranth

  • Vf02 error while releasing a billing doc to accounting

    Hello All,
    I m getting the below mentioned error while releasing a billing doc for a accouting.
    I have checked all the settings in vkoa , ob52 and many more and all are set properly, now m not able to track where actually the prob is.
    error is: No account is specified in item 0000001004
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000001004" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000001004" of the FI/CO document.
    Points wil be rewarded
    Thanks,
    SUnny

    Hi,
    Have you checked what is the determination account determination log ? You can do this by entering in VF02 and select from the menu Environment -> Account Determination Analisys -> Revenue Accounts.
    In this log you can see what are posting keys determined from the pricing procedure that should be posted in the FI document and determine very easy in which step the account was not determined.
    After that you can maintain the correct account in VKOA transaction.
    BR,
    Valentin

  • Error while releasing Billing doc to Accounting

    Hi all
    I am gettin the following error while releasing a Billing doc to FI-
    Reconciliation account 240001 or short key 00 is not permitted
    The Billing doc pertains to Export sales and the billing Doc type is Export Invoice. However the Customer Recon A/c is defined as 240000 which is for Domestic Sales. A/c 240001 stands for Export Sales. I am wondering why it is asking for the Export Sales Recon a/c. Does this has something to do with Alternative Recon A/c? Should I set an Alternative Recon A/c and check this? If yes, then should it be defined in SD or FI?
    If any1 has come across this prob, plzz help me.
    Regards

    It is all Fi related, and should be defined by the Fi Consultant.
    But by changing the sort key I think your error can be solved. But I don't exactly know your config settings to recommend any solution.
    Regards
    AK
    Please reward if helpful

Maybe you are looking for

  • Error Message when we create a Service Ticket in SAP CRM 2007

    Hi All we are having a serious production issue when we create a S.Ticket in SAP CRM 2007 We get the following error message we are not trying to send any information to R/3 We have a planned go live this saturday. So any help would be greatly apprec

  • Error when trying to open files

    I created a movie last weekend and everything went fine. Went to start one of the Lessons and kept getting this error "Codec not found. You may be using a compression type without the corresponding hardware card." I have not made any changes to the s

  • XAER_RMERR error when configuring readonly cache group

    Hello, I am having some problem with XA transaction controll on websphere. error log looks like below. ==================================================================== [09. 6. 26 13:28:15:511 KST] 0000002b ServiceLogger I com.ibm.ws.ffdc.Incident

  • App icons won't move to a different page

    After the icons are wiggling I try to move them to another page but the icon just slides back to where it was? I have no problem doing this on my iPhone, only y iPad? Any ideas?

  • Broken Iphone5 screen in London

    Hello, Can someone please tell me how much does it cost to fix / replace a broken Iphone 5 screen in the Apple store in London? (The device was bought there)