Got the message 'Adobe Reader plug-in not installed or enabled'

I have checked all the settings and enabled in tools. Moreover i have installed latest version.
Kindly help us on the issue.
'Adobe Reader plug-in not installed or enabled'
T

Hi Raja,
I can understand your concern & will guide you in the right direction.
Let me know the version of Adobe Reader, web browser & operating system installed on your computer?
You can also refer to this KB doc. for the troubleshooting steps : Configure browser to use the Adobe PDF plug-in
*Note : The Adobe Reader plugin will not be supported in Chrome. The Chromium team has decided to remove support for NPAPI plugins like Adobe Reader. Here's a blog post that describes their decision - Chromium Blog: The Final Countdown for NPAPI
Regards,
Aadesh

Similar Messages

  • "Adobe reader plug-in not installed or enabled" error

    Adober Reader 10.1.10.18
    Browser - IE10
    Plugin is enabled by add-ons
    Have unchecked enabled protection mode
    Did a repair of the reader as well to no avail. anyone have any other advice?
    We can't upgrade to 11 as we need to test this in our organization before deploying

    Can you view PDFs otherwise in IE? I wonder if it's a message issued in error.

  • Adobe Reader 9 will not install on MacBookPro

    After downloading the proper Adobe Reader 9 for my MacBookPro (Intel processor), I get the message " Adobe Reader 9 cannot be installed on this computer. Make sure your system meets the requirements." Anyone else have the same problem? Please help.
    Suresh

    OK, I just realized the mix up in my earlier posting/s :-(
    The *****.ppc.pkg is the powerpc version which I had downloaded earlier and the ******.i386 is the intel version which is the correct version for my MacBookPro. I use Firefox browser, and at first I thought that since Adobe was not in its list of allowed sites, it was preventing installation. However that is not the case, since the problem persists even after I added Adobe to the list of allowed sites, and even when I downloaded using Safari!
    Mike, yes, I have rebooted a number of times, but have not yet tried to reinstall the OS from the disc. I do not quite understand what you mean by different administrative user; I am the only user. I just downloaded applejack and supposedly it was installed on volume HD, but I do not see it anywhere! Another mystery.
    Suresh

  • I just installed 10.2.2. When I tried to start iTunes, I got the message that Rosetta needed to be installed to open iTunes. It downloaded and installed Rosetta but iTunes will not open and it no longer has the iTunes icon. What do I do now?

    I installed iTunes 10.2.2. When I tried to open it, I got the message that iTunes needs to install Rosetta to open. It then appeared to download and and install Rosetta. When I try to open iTunes, the icon bounces but iTunes does not open. The icon has also changed from the usual iTunes icon. What do I do now?

    I have a 2010 MBP15 which I do not use as much as my pc. When I do, I check for updates and I believe I updated iTunes to 10.2.2 a week or so ago. Since I still use iTunes primarily on my pc, I didn't bother firing up the updated iTunes on the mac.
    Last week, when I actually started iTunes on the mac, I got the message that Rosetta needed to be installed. Like abefighter I stalled. I surfed the net, read this thread to get some hints as to w** was going on.
    When I checked the system profile in the mac, I think it showed PowerPC for 'kind.' Surfing the Internet I found out Rosetta was something needed to help applications work on PowerPCs. But wait, since this MBP is an Intel, why would or should it be asking me for some stone-age plug-in that was never mentioned in all the previous updates for iTunes until now? Fyi, the iTunes icon on the dock had changed to what I think is an AppleWorks icon.
    So, I assumed that the update that resulted in my mac was corrupted. At first I scoured for 10.2.1, thinking that the last version was a dud, but in vain, nowhere to be found. I gave up and settled for a fresh 10.2.2. I did a casual delete, without touching any of the related personal preference files in my folder and it now which works fine. I'm glad I didn't jump to install Rosetta; I read elsewhere about someone who actually went through with the Rosetta install that resulted unhappily.
    Unless the mac in question is a PowerPC, I would doubt the need for Rosetta installation.

  • I have uninstalled and reinstalled the most current edition of Adobe Reader, including the patch. When I open a PDF file, the screen is first grey, then viewable, but the message "Adobe Reader has stopped working" comes up. How do I remedy this?

    I have uninstalled and reinstalled the most current edition of Adobe Reader (11.9), including the patch. When I open a PDF file, the screen is first grey, then viewable, but then the message "Adobe Reader has stopped working" comes up. How do I remedy this?

    RR,
    One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
    Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
    http://www.recoverytoolbox.com/buy_illustrator.html
    and another similar website,
    http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
    As far as I remember, the former is for Win and the latter for Mac.
    Here are a few pages about struggling with it yourself:
    http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
    http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
    http://kb2.adobe.com/cps/500/cpsid_50032.html
    http://kb2.adobe.com/cps/500/cpsid_50031.html
    http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
    Failing a full recovery, hopefully you have one or more earlier versions and/or bits of artwork saved before it happened.

  • I get the message "adobe flash plug in has crashed" when I try to play a sample file from audible.co.uk

    I am running windows vista for business (32 bit), using firefox, when I try to play a sample from audible.co.uk the browser hangs and then I get the message, "adobe flash plug in has crashed". I have tried uninstalling the flash player and reinstalling to no avail. It also crashes using Internet Explorer and Google Chrome.

    If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. Safari > Preferences > Extensions
    It can also be installed as a plugin in /Library/Internet-Plug-Ins.
    Try uninstalling the currently installled Flash plugin (required for most YouTube content) then reinstall new >  Troubleshoot Flash Player | Mac OS
    From your Safari menu bar top of your screen click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now from the menu bar click Develop > Empty Caches

  • Adobe Reader/Acrobat Is not Installed

    I get an error on machines on our work network that says Adobe Reader/Acrobat is not installed. However most cases it is installed on the machine and in most cases it turns out to be the 8.1.1 version of Adobe reader. So what we have noticed is that the permissions do not seem to be right with the .pdf file extention. We manually add the users, power users group to the file extention and then we grant them full control over the extention and in most cases that as well will not work. The next step would be to uninstall 8.1.1 Adobe reader and then reboot. Upon the restart we will log on and install the 8.1.2 update. Sometimes this works but then again I have noticed that the users, power users group is not in the .pdf file extention. Then we will add them in and yet the user will still have the same error message. We have fun out of ideas and the other bad scenario is that this is free software and its very difficult to get support for. Anyone have any ideas?

    Hi snoreaustralia,
    It sounds like you just need to associate the PDF filename extension with Acrobat, rather than Preview. Please see this document from the Microsoft Help for instructions on choosing the default program for opening a particular file type (in your case, PDF): Change which programs Windows uses by default - Windows Help
    Best,
    Sara

  • I have successfully installed itunes10, then get an error message that reads, itunes was not installed correctly. please reinstall itunes, error 7 Windows error 127

    I have successfully installed itunes 10, then get an error message that reads, itunes was not installed correctly Error 7 (Windows error 127)

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Hello.  Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot.  I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).

    Hello.  Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot.  I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).  I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue.  I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support.  This also has not resolved the issue.
    When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.”  Verify you have sufficient privileges to start system services.  I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next. 

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
    In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
    tt2

  • After a travel abroad I have forgotten to activate wifi, and  I have got the message telling that I have not done any backups for 2 weeks on my iPad. It is impossible to get rid of this message and do the correcting actions. pls help

    The message stays on the iPad screen no matter how many times I push the OK-button.
    Any ideas how to get through this problem?

    Welcome to Apple Support Communities
    Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use your device again. Finally, open Settings > iCloud > Storage & Backup, and make a backup. The device will be backed up when it's plugged to the charger and connected to your network

  • Adobe Reader 9 will not install reporting installatiom package could not be opened

    I have WIN XP PRO with SP3. This is a new machine and is running beautifully except Adobe Reader 8 or 9 will not install.
    At about 94% done the Adobe Download manager stops and shows the following Windows Installer message
    The installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package.
    Of course when I click OK. I get the message from the downloader that "Installation operation completed successfully". Which of course is not true.
    Can any one explain what is happening, and how I should address?

    Thanks for the help. Your solution to unregister and register msiexec did not resolve the problem, but it got me thinking and I continued looking down this line of thought through the Microsoft KB articles. There I found a comment per security rights authorization. I had been using an account with administrator rights, but I tried again using the actual administrator account. This worked fine. Adobe 9 is installed and running.

  • Adobe reader 9 will not install

    Hi all
    I need some help, I run a Vista 32 bit PC, Adobe updater has tried to update the reader from version 8.1.2 to 9, it downloads new files successfully, activates the installer almost completes to 99.9% then stops with an error! See the alert box message given below.
    The feature you are trying to use is on a network resource that is unavailable.
    Or enter an alternate path to a folder containing the installation package AcroRead.msi
    When I close this error box I get another message saying there was an error 1714 older version of adobe 9 could not be removed.
    Likewise there is a copy of adobe 8.1.2 which I am unable to uninstall from the control panel programs and features any help to this solution would be much appreciated.
    Thanks James

    Hello:
    I have had trouble upgrading Adobe Reader 8.1 for many days.
    So, I had never deleted previous releases (i.e Release 6/7 or versions either) so I went back and removed all Adobe Reader releases through the Control Panel.
    I attempted to load Adobe Reader 8.1.2 and received the following message: Error 1316. A Network error occurred while attempting to read from the file: C:\Windows\Installer\Rdr60ENU.msi
    The system backed out all changes and now I am without any Adobe Reader. I do not know what to do as I could not find this error message in the Knowledgebase Search database.
    Please advise

  • Adobe Reader update will not install?

    Hi
    I have a ASUS laptop with Windows 7 Home Premium Service Pack 1/64-bit OS
    I have my computer set to receive & install updates automatically for Adobe products. I have an Adobe Reader install program that will not complete it's install. The install program starts to install but
    then it just gets stuck (the bottom picture is where it gets stuck) & will not complete the install. The top picture is the message that appears after 15 or more minutes of the bottom picture Any suggestions on how I can complete the install would be appreciated. I added a couple of screen shots. Thanks

    Hey dommm56,
    Please refer this kb file and let me know if it resolves your issue.
    Error 1305 when you try to install an Adobe product (Windows)
    Regards,
    Anubha

  • Why do Adobe Reader and Flashplayer not install

    I download bot Adobe Reader and Flshplayer installers to my hard drive then run the installer file.  Get promped for permission to run.  The installer seems to start and the installer file gets removed from the hard drive but neither product installs?   Looking in Task Manager, the installer stays there (forever).  This is windows Vista, 32 bit

    The Flash Player installers from my link also have different names from the AIH installers.  Here are the direct download links
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)

  • Adobe Reader and Flash not installing

    As soon as the install starts I get the following messages
    Error for Adobe Flash
    An Error has occured in the script on this page
    Line: 1
    Char  14760
    Error:  Object expected
    Code: URL: http://127..1.4453/ap/_ia/adobe.js
    Error for Adobe Reader
    An Error has occuren in the script on this page
    Line: 1
    Char  408
    Error:  Object expected
    Code: 0URL: http://127..1.4567/ap/_ia/adobe.js
    Can anyone tell me what the problem is?  Thank you

    Moving this discussion to the Installing Flash Player forum.

Maybe you are looking for

  • Detect something just copied to the clipboard

    Hi everyone, I'm wondering if it is possible for a java program to detect something just got copied into the system's clipboard? I don't mind using JNI if that helps. I need to be notified after a user "right click and select copy" in any application

  • Wanting to write a SOAP server.

    I'm a Java programmer of 8 years experience, worked in J2EE, good knowledge of the usual XML APIs, the HTTP protocol etc, just so we know where we're starting... I'd like to write a SOAP server to expose certain routines to a Java client. Obviously I

  • Object arrays

    Very new to java. I want to set up an array of objects with code below. The object class compiles, but the main class won't. It has a problem with the object's constructor. (I want to have 20 objects with an object variable (obvar) different in each

  • Oci error in report 6i in reports with more than 1000 pages

    hi in a report that has more than 1000 page output , run in report 6i while formatting pages an error occurs: OCI error.==>SELECT NAME, what this means? please help me. CAROL.

  • Output determination in MIRO

    I am trying to develop a new <b>requirement</b> in VOFM for <b>outputcontrol</b>  to pick up credit memos in the transaction <b>MIRO</b>. In this routine i need to fetch the corresponding PO number of the Credit memo. None of the communication struct