Got this error after doing hardware test 4MOT /4/ 40000003: HDD-1222

Got this error 4MOT /4/ 40000003: HDD-1222. After login screen goes white and constantly trying to load and goes no further.

Hard Drive temp problem. Could be the drive, could be the fan, could be the connection between the drive and the logic board.
Did you just change the HD in the system?
If the system is under warranty or Apple Care get it checked out.
You could try an SMS reset Intel-based Macs: Resetting the System Management ... but it is unlikely to clear this.

Similar Messages

Error Code 4MOT/1/40000003:HDD-1344. I got this code after running hardware testing, does anyone know what this means? Thanks

.

Buy a new drive and replace the old one. While the old one is still working (if it is) I would quickly make a bootable backup to an external drive if you have one, assuming you have no extant backup.
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
You will find suitable replacement drives at OWC.
They may also have a video tutorial. Or you may find a written tutorial at ifixit.com. Also may find one by Googling for it.

Message from Apple Hardware Test 4Mot/4/40000003: HDD-1361

Ich habe Probleme mit meiner Festplatte. Nach einem Hard reset kam beim Start ein aktualisierungsbalken. Nach dem der Balken vollständig gefüllt war schaltete sich der Rechner selbständig ab. Ein Start der recovery Partition brachte folgenden Effekt. Im festplattendienstprogramm war die Macintosh Hd. Ausgegraut dargestellt. Die Reparatur lief an und es stand als Meldung, dass keine Fehler gefunden wurden, trotz dem blieb das Programm aktiv. Die Festplatte kann nicht partitioniert oder formatiert werden. Gleiches bei versuchen die Festplatte im Target Modus zu reparieren oder zu formatieren respektive partitioniern. Ich habe nun den Support um Rückruf gebeten. Kann jemand helfen?

The error indicates an issue with the hard drive fan motor. It's possible that you won't be able to recover anything from the hard drive, so if you haven't got a backup, it's difficult to recover files. You can try using DiskWarrior or even taking the hard drive to a company that recovers files, but it's not sure if this will work.
Now, the best you can do is to take your iMac to an Apple Store or reseller to get your hard drive replaced. You can do it yourself, but I prefer not to modify anything on a iMac myself.
Der Fehler zeigt ein Problem mit der Festplatte Lüftermotor. Es ist möglich, dass Sie nicht in der Lage, etwas von der Festplatte wiederherstellen, so dass, wenn Sie nicht haben ein Backup, es schwierig ist, Dateien wiederherzustellen. Sie können versuchen, mit DiskWarrior oder sogar unter die Festplatte mit einer Firma, die Dateien wieder erholt, aber es ist nicht sicher, ob dies funktionieren wird.
Nun ist das Beste, was Sie tun können, um Ihren iMac zu einem Apple Store oder Reseller nehmen, um Ihre Festplatte ersetzt. Sie können es selbst tun, aber ich ziehe nicht, alles auf einem iMac ändern mich

Got this error after deploying ear file into OC4J server.

Hello Frnsz,
Can any one help to resolve the following error :)
Got this error after deploying ear file into OC4J server.
2008-06-04 14:57:58.551 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/pager-taglib.tld
2008-06-04 14:57:58.566 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:57:58.566 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/struts-bean.tld
2008-06-04 14:57:58.598 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:57:58.598 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/struts-html.tld
2008-06-04 14:57:58.629 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:57:58.629 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/struts-logic.tld
2008-06-04 14:57:58.660 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:57:58.660 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/struts-nested.tld
2008-06-04 14:57:58.691 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:57:58.691 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/struts-tiles.tld
2008-06-04 14:57:58.723 NOTIFICATION Binding web application(s) to site default-web-site ends...
2008-06-04 14:57:58.723 NOTIFICATION Application Deployer for MyEarProject COMPLETES. Operation time: 3422 msecs
2008-06-04 14:58:04.895 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.910 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.926 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.942 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.957 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.973 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.973 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:04.973 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:04.973 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:04.989 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:04.989 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:04.989 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:05.020 NOTIFICATION J2EE JSP-0008 Unable to dispatch JSP Page : Exception:oracle.jsp.parse.JspParseException: /WEB-INF/jsp/login.jsp: Line # 2, <%@ taglib uri="/WEB-INF/tld/struts-html.tld" prefix="html"%>
Error: java.lang.ClassNotFoundException: org.apache.struts.taglib.html.MessagesTei
Cheers,
Cap

Cross posted in correct forum
[http://forum.java.sun.com/thread.jspa?threadID=5302192]

TS1702 I got this error when doing a restore

I got this error when doing a restore and the restrictions were turned on . I disabled restrictions and the restore was able to complete.

The error in itunes had a link to http://support.apple.com/kb/TS1702. I placed this message here for anyone that might navigate to the same message and would hopefully find this. Yes turning off restrictions allowed the restore to complete and everyone is now happy.

Can't run a workflow manually. I got this error: 'StartWorkflowOnListItem' does not have an implementation.

Hello Everybody,
I have a site collection in sharepoint 2013. When I go to site contents and then click on workflows I got this error:
Method 'StartWorkflowOnListItem' in
type 'Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider' from
assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0,
Culture=neutral, PublicKeyToken=71e9bce111e9429c' does not have an
implementation.
Then I created a site workflow using SharePoint designer 2013 and I published, Still the same error.
I created a list and a workflow associated to that list. That workflow is configured to run manually for every item in that list. Again when I go to the item in the list and click workflows I got the same error.
What Am I missing?
Please, Can anyone help me?

I'm having this issue as well, the apparent fix is to install
an additional patch to the farm servers. I installed the patch in my dev environment and it takes SharePoint down for about 5 minutes per install, but doesn't require a reboot.
Source:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/b189e4b8-bb9e-4ade-a3d5-cd2e0f90e93f/workflow-not-working-after-installing-service-pack-1-and-patches?forum=sharepointadmin

I got an error on the hardware test how do i fix it Oxa9f7b718

PLEASEEEEEEEEE HELP ME

I have never heard of this error and can't find any information on it. I suggest you follow Linc's advice and make an appointment at the Genius Bar and have them take a look. There is no charge for looking.
cornelius

Hardware test: 4MOT/4/40000003. HDD-1342??

My iMac quad has been having 'issues' .
Tried all sorts of diagnostic reboots, etc.
Did a hardware test and got this message:
4MOT/4/40000003. HDD-1342
Anyone know what that code means??
many thanks
William - Middle of NowHere, Canada

This has been in other threads. MOT means motor as in fan motor, and HDD means hard drive. I think it means the logic board is no longer telling the fan motor nearest the hard drive to come on or speed up. Or the fan motor has failed, or the sensor on the drive. Can you hear the fan, or feel air blowing? Do you have iStat pro, which reports temps and fan speeds? Another poster thot it means the cooling isn't working around the hard drive and it has cooked itself due to lack of ventilation. In any event you need to have it looked at.

The procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll . I got this error after downloading and installing Frame MAker 12. My system os is service pack 2.

The above mentioned error is displayed when i open Adobe Framemaker 12 after installing it.
the procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll
this is the error.
my os is windows service pack 2
2 gb ram

You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM.

ERROR:4MOT/4/40000003:HDD-1253

DOES ANYONE KNOW WHAT IS THIS ERROR AND HOW TO FIX IT?
I HAVE AN IMAC 27" (LATE 2009) AND I DISCOVERED THIS ERROR AFTER THE HARDWARE TEST!
I HAD SOME PROBLEMS WITH FREEZING PROGRAMS!

It refers to the motor for the fan cooling the Hard Drive. If that's not working and you're experiencing problems it's likely to be overheating, which in turn will lead to HDD failure.
Time to get it in to an authorised repairer.

Error code - 4MOT/4/40000003.HDD

Can anybody please give me some advice on what the above mentioned error code is as my iMac is failing to do anything except start up,
Thanks Mark.

Hi,
Try these below in order, to check whether you can boot the machine further:
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
OS X: About OS X Recovery to confirm that the internal disk is accessible.
Afterwards, try a normal reboot.
If the machine is still not booting:
Refer: Hardware Test 4MOT/4/40000003: HDD-1326
and Using Apple Hardware Test
Cheers

HT4543 Hi guys, I got this error code when I did my apple hardware test. 4MOT/2/40000004:HDD-1379 does anyone have an idea of what this could mean? Please Help .

Hi guys, I got this error code when I did my apple hardware test. 4MOT/2/40000004:HDD-1379 does anyone have an idea of what this could mean? Please Help .

You can buy and install the hard drive you want to. However, on Late 2009 and newer iMacs the temperature sensor is in the hard drive, so if you replace it with a hard drive that has not got a temperature sensor you will have serious fan problems.
You have got an Early 2009 iMac, so do not worry about this. You can buy a hard drive at OWC > http://eshop.macsales.com/shop/hard-drives/3.5-SerialATA/ Follow these steps > http://www.ifixit.com/Guide/iMac+Intel+24-Inch+EMC+2267+Hard+Drive+Replacement/9 028

I ran a apple test and got a error code 4mot/1/40000003:hdd-1376 does anyone know what this is thanks

I ran a apple test and got a error code 4mot/1/40000003:hdd-1376 does anyone know what this is thanks

Buy a new drive and replace the old one. While the old one is still working (if it is) I would quickly make a bootable backup to an external drive if you have one, assuming you have no extant backup.
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
You will find suitable replacement drives at OWC.
They may also have a video tutorial. Or you may find a written tutorial at ifixit.com. Also may find one by Googling for it.

My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!

WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of!

I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?

I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?

Hi guys,
I have a similar problem, the numbers at the end of the error code change a bit, when i do the apple hardware test again ( I have an imac of early 2008, 2,66 GH). I have 2 GB Ram now, after one week ago one of the 2GB-Ram sticks "died") In fact, it was working quite much, then suddenly (i bought imac in june 2009) the ram stick was broken. The apple-support center told me its probably not a problem, but did not tell me what the error code means. I have apple-care for 3 years, its a luck i did it, so they will take it and check carefully, but just after i insisted on the error. It seems they do not want to tell u what that could be....
Do u guys think the ram-stick was broken because the imac was too hot???

Got this error after doing hardware test 4MOT /4/ 40000003: HDD-1222

Similar Messages

Maybe you are looking for