Got update with same build

My Z1 compact came with 4.4.4 build no. 14.4.A.0.108. And now I've got an update notification with same build number. Should I update it or not? Its 1gb in size or else I wouldn't have had second thoughts.

I have .108 and had a small .108 update so I updated assuming it was a minor tweak but no way was mine 1GB - Open Settings then Apps and swipe to All and locate Update centre and open then tap on Clear cache and Clear data and see if it's still there after a refresh of the app
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

Dimension foreign key on Fact gets updated with same value

Hi All,
I'm hoping someone has at least seen this problem and can provide insight.
Background:
- We are on OWB 10.2
- Fact table is Billing_F
- Fact table has foreign keys to Customer_Dim, SalesOrg_Dim, Time_Dim, etc.
- Fact table has update mode Update/Insert
Once in a while, every row in the Billing Fact gets updated with the SAME SalesOrg_Dim foreign key column value. In other words, the data would look like:
Before:
Line ID Amt SalesOrg_Key
1 100 19241
2 200 21925
3 140 08585
After:
Line ID Amt SalesOrg_Key
1 100 12345
2 200 12345
3 140 12345
*** The Source tables contain values in the Before table. ***
We can't reproduce this on a consistent basis. The only way to "correct" the data is to rerun the mapping from source -> staging -> fact again. No other change.
Please, has anyone else at least experienced this problem? If so, how were you able to fix it permanently?
Any help is greatly appreciated!
irene

Hi Irene
Difficult to help here without reviewing your mappings/schedule but does SalesOrgKey 12345 represent a particular value e.g. Unknown, Default?
I suspect it's something to do with your load order in that the data in the dimension is not available/ready when the fact is loaded and therefore a default value is being inserted. When the fact load is rerun I'm guessing the load of the dimension has finished and therefore the key lookup returns the proper keys from the dimension. Is the dimension truncated and reloaded?
Regards
Si

Problem with scrollbar after update with App Builder 32.4.4.

Hey,
I just created an app update with the new version of the DPS App Builder (32.4.4.). After the update the scrollbar (of the viewer – no scrollable content) moved from it's original position. (see screenshot)
Any ideas?

Could you tell me more about the article? Is it an HTML article or a PDF/JPEG/PNG?
The issue appears in every article, in every folio. It doesn't depends on the type of article.
Is your Multi Folio app a Newsstand app as well?
Yes.
Was the previous version of the app already installed on the device with downloaded folios in it, and then you upgraded it via iTunes? or was it a fresh install on the device?
The previous version was build one week ago with the previous App Builder and installed via TestFlight on the iPad. Today we created a new version with the new App Builder (32.4.4) and updated the App via TestFlight.
Thanks!

Keep getting app updates with same version number

I noticed that I keep getting update notifications in the app section in iTunes from the apps I bought and downloaded for free but they have the same version number. Like just now, I checked for updates and there where about 42! I believe it's for every app that I installed. Why is this?
André
Message was edited by: AndreasvanHaren

Are you getting any error messages? Or just photos of deckchairs?

My I phone 4 got updated with iOS 7.1 and from then hotspot is missing. what to do now?

Can any body help me in retaining my hotspot that got disappeared after getting updated to iOS7.1 ?

Adding to Ocean20's response, depending on the circumstances, you may have to go to Settings > Cellular > Personal Hotspot. That would be true if for some reason it is as if you never had Personal Hotspot set up on your iPhone before.

Customers updated with wrong Telephone number - SD_CUSTOMER_MAINTAIN_ALL

Hi All,
When we are updating bulk of customers, a particular telephone (ADR2-TEL_NUMBER) is updated for the bulk of customers. This is weird. This is happening when we update customer master with SD_CUSTOMER_MAINTAIN_ALL. This is not happening all the time. And, this is happening for around 5 telephone numbers (till now).
Looks like, the address data is not cleared from SAP memory, and is used to update the subsequent customers. But, I wonder how many days this data will be stored in SAP memory, as I can see the customers got updated with same tel no after few months as well.
Is it some thing related to function ADDR_MEMORY_CLEAR.
Did any of you face the same issue? Please let me know your views on this.
Thanks in Advance!
Rajesh.

Hi Hareesh,
Thanks for the reply.
Unfortunately, I can not provide you the code snippet. Its not just one program, this is happening in different processes (each having some thousands of Lines of Code). This is not happening all the time. It is very rare issue and happening from mid 2009 (But, we have identified recently). As per our analysis, this is not a data issue.
Thanks again!
Regards,
Rajesh.

How to update with a custom build without losing all the data?

I have a ZTE Open I regularly update with custom builds. Every time I do this, I lose all of my data on the phone, such as contacts, installed apps from the Market store, settings (including wireless and email settings).
Recovering all of this data and settings every time is extremely annoying. Is there a way not to lose them in the process, or to save them and repristining them afterwards?

Thanks, Ralph!
I tried the backup_restore_profile.sh tool and apparently it worked great: I backed up my data, flashed my old build on the device (which erased all of my data) and then restored everithing, including installed apps and settings.
I will try this with a new FFOS version (like 2.1) before declaring the problem completely solved.
EDIT: I'm not going to try flashing FFOS 2.1 on the ZTE Open anymore, since I'm now a proud owner of a Flame. The backup_restore_profile.sh tool seemed to work pretty well though, so I will mark the question as solved without further tests.

How to manually update PowerShell V3 build from CTP2 to production

Hello,
We have PowerShell V3 CTP2 installed on a Windows Server 2008 R2 Enterprise.
The server isn't connected to the internet.
How can I update PowerShell (and whatever else is necessary) to bring it up to the latest production version?
$PSVersionTable gives the following:
BuildVersion: 6.2.8158.0
PSVersion: 3.0
CLRVersion: 4.0.30319.296
PSRemotingProtocolVersion: 2.103
WSManStackVersion: 3.0
PSCompatibleVersions: {1.0, 2.0, 3.0}
Another server that had PS CTP2 is connected to the internet and (I assume) got updated with Windows Update to the latest PS.
For comparison, this is $PSversionTable on the updated server:
BuildVersion: 6.2.9200.16481
PSVersion: 3.0
CLRVersion: 4.0.30319.18444
PSRemotingProtocolVersion: 2.2
WSManStackVersion: 3.0
PSCompatibleVersions: {1.0, 2.0, 3.0}
I couldn't find any hotfixes that would update PS.
Any help is appreciated,
Mike

Here's a link to the WMF4 download:
https://support.microsoft.com/kb/2819745
You need .Net 4.5 installed.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

TS1424 Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. I

Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. Ideas?

Hi, you have to logout from your iTunes account and reconnect it:
Settings / iTunes & App Stores / ...
https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
Hope this helps... :-)

My current iPhoto'11 version is the 9.2.1 one. I just attempted to install the 9.2.3 update, but all I got was an Alert sign stating that "iPhoto 9.1.0 or later is required to install this update." Same thing happened with the 9.1.0 update afterwards.

My current iPhoto'11 version is the 9.2.1 one. I just attempted to install the 9.2.3 update, but all I got was an Alert sign stating that "iPhto 9.1.0 or later is required to install this update." I then tried to download the 9.1.0 update, with the same fruitless results. What can be wrong here?

Put iPhoto back into the Applications folder, not in any subfolders, and ensure it's named iPhoto or iPhoto.app.
(65384)

TS3694 hi i recently updated into ios 7.0.4 now i want to fully restore my ipad to resell but when i restore it it got stuck with apple logo and progress bar with 45% completed as firware file is downloaded using ipad 4 wifi itunes 11.3.8

hi i rescently updated my ipad 4 in ios 7.0.4 and for resell purpose i want to restore my ipad via itunes but it got stuck at apple logo and progress bar of 45% completed i tried it 50 times but it stuck on that exact point for hours i cant able to restore it and had no errors it just like freezes at one point i also uses dfu mode but got stuck at same problem using windows 7 32 bits itunes 11.3.8 ipad 4 wifi please help

My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine.

Update Credit managment dispay in some of the orders with same Payer

Hi,
I have some sales orders created with same PO, same sold to party and same payer. In one of the Sales Order
credit control area and credit account is updated but the other order's did not update with this information.
I can see the Credit account dispay in that Sales Order which got updated but the other orders are giving the message "Cannot display credit limit as no credit management account is available"
Please let me know how to fix the other Sales orders Credit accounts, these all orders have same Payer and we have issue in the Consolidate billing of these orders and all these orders have subsequent documents like Delivery and Invoice.
VBAK-KKBER and VBAK-KNKLI fields are blank in these Orders except the one which got updated.
Thanks in advance.
- Fract

Hi Charles,
The Order with values filled in VBAK-KKBER and VBAK-KNKLI is not a latest order, We have orders after and before this order also.
I already executed F.28 but nothing got changed.
Regards,
Fract
Edited by: fract_get on Nov 15, 2011 10:26 PM

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Hi, face issue that can not activate iPhone but can log in iCloud wed page with same Apple ID and Password after Iphone been update to IOS 8. Need Help. Thanks

Hi, face issue that can not activate iPhone but can log in iCloud web page with same Apple ID and Password after iPhone been update to IOS 8.1.2
Also in the iCloud 'Find my iPhone" , no Device been found.
Been raise this incident, got the Case ID and call to Apple Support but it seems like out of office hour
Need Help Thanks

Yes, able to make a call to Apple Support but in the end still keep on going to try the Apple ID and Password.
And it seems like the iPhone ID in this device been locked
May to know is that possible to ask the Apple Technician to unlocked the ID so i could activate the iPhone without log in any Apple ID?

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

Got update with same build

Similar Messages

Maybe you are looking for