GotoAndPlay with a _mc on the main timeline

Hello this is my first post here. Thank you in advance for any help.
I am trying to use a button on frame 1 to go to a movie clip that is on frame 1018 ( i put the movie clip on the main timeline on frame 1018)
so main(root) --> 1018 --> shipattack_mc ---> "endtest"
I have tried using these commands and a few variations of the same thing.
_parent
this.
shipattack.gotoAndPlay('endtest")
gotoAndPlay("endtest")
My main timeline ends at 1018 with a stop() and the movieclip "shipattack_mc" plays out its 1000 or so frames.
I am testing some things towards the end of the shipattack and want a button to skip to the end. Thanks.

Thankyou for the quick reply, it is working perfectly. Odd that my flash instructor couldn't figure it out though.
Is this a Formal forum? It seems that you answer most of the questions... I was under the impression that it was random community members that contributed. I'm a bit reluctant to repost futher issues.
skip_btn.onRelease = function()
    stopAllSounds();
    _root.sevenclans1.start(60,0);
    trace("shipattack_mc").shipattack_mc;
    _root.gotoAndStop("end");
    shipattack_mc.gotoAndPlay(800);

Similar Messages

Referencing the main timeline from elsewhere

From inside a movie clip (button) which is inside a display
object (buttonSet), I want to gotoAndPlay a specific frame on the
main timeline. I've tried stage.gotoAndPlay(thisFrame). I got
closer with gotoAndPlay(stage.thisFrame). I still have something
wrong.
I have about 15 frames on the main timeline. Each frame
contains a myriad of objects all doing different things. Most
importantly they transition from frame to frame based on the
current frame (last button clicked) and the next frame (the newly
clicked button).
Example: the last button that was clicked was button #4, the
button I have just clicked is button #2. Based on this knowledge, I
want the main timeline to gotoAndPlay frame #6.
Thanks for the aid. :)

the flash compiler (in strict mode) often has trouble
"remembering" the class-type of objects/variables. "typing" those
objects explicitly helps the compiler to overcome erroneous error
messages.

Using an mc to control the main timeline with multiple scenes

OK, I have a main timeline that has 27 different scenes. I have a movie clip that is an "on call" navigation menu for the main timeline. I can call the menu once, and it will go to the first place I want it to go. However, I cannot seem to figure out how to get it to go away to be able to call it again. I get the "must be child of caller" error. Any thoughts on how to get rid of it each time I use it?

A button is clicked which calls the following AS3 code:
MovieClip(this.root).addChild(myMenu);

Moving to a frame in Movieclip timeline from the main timeline

I am in the learning process. Working with FlashCS5 and AS3.
Please bear with me if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
mcassessJohn.addEventListener(MouseEvent.CLICK, onJohnClick);
function onJohnClick(evt:MouseEvent):void {
mcassessJohn.gotoAndPlay("johnFeedback");
This works fine. However problem starts when I place a button "questionJohn" in the movieclip(mcassessJohn) time line at frame "johnFeedback" and try to move to another frame by clicking the button and using the following actionscript code;
questionJohn.addEventListener(MouseEventClick,onClick);
function onClick(evt:MouseEvent):void {
gotoAnd Play("johnFeedback");
Placed the above code in actions layer in the movieclip timeline at frame "johnFeedback". I had placed the button also in the movieclip timeline at Frame "johnFeedback in layer buttons. No compiler error.No runtime error. Just nothing happens when I click on the button "questionJohn".
Would appreciate if you can let me know where I am going wrong.

Thats because if u assign the listeners to a parent movieclip it will not pickup listener assigned to its child.
A work around is put a invisible btn inside mcassessJohn movieclip on frame 1 and assign onJohnClick function to that.
And one more thing, i think u r trying to perform same operation on both the btns
http://www.darshanrane.com

Targeting the main timeline

Trying to make the switch from AS2 to AS3 and like many
before me, becoming confused.
I've laid out three movieClips on my main timeline (named,
"main") and spaced them five frames apart, nice and tidy, like I
like to do. Each frame on the main timeline containing a movieClip
has been given a unique frame label. My problem is, I want to have
the movieClips jump to the next targeted movieClip on the main
timeline after clicking a button, or upon entering the last frame
of its predecessor, in some cases. In AS2 the was easy to do this
was by using the gotoAndPlay function and targeting to the_root
timeline. Now I can't figure out what to do. I can make any button
inside a movieClip target a specific frame within that same mc, but
cannot make a jump to the main timeline to play the next movieClip.
What am I missing here? I'm a noobie at AS3 and fumbling my
way forward. (should be obvious now) Is there a simple way to refer
back to the main timeline, which is only one level up? What am I
missing?
Here's as far as I got with the AS3 code within the mcs:
stop();
cont5_mc.addEventListener(MouseEvent.CLICK, onClick2);
function onClick2(event:MouseEvent):void
trace("test");
cont5_mc.buttonMode = true;
The trace function runs true so it's a matter of telling the
player how to get to the main timeline and frame label.
TIA for your help, all you flashy genius . . . Speak to me
like I am a three year old. -grin-
thokitts

kglad:
Thank you for your instant reply. I see you sent it out last
night. Really appreciated. Got my button in movieClip1 to refer
back to movieClip2 on the main timeline with your help but now am
presented with the issue of having the last frame of movieClip2
automatically taking the viewer back to the main timeline to begin
playing movieClip3, located on frame label "gsm".
Again, I know this should be easy, but conceptually I am
having a problem with how to do this. I don't have a button to
attach the AS3 to and this new syntax is confusing to me. Nor do I
want this to be a button based decision on the viewer's part. How
do I attach this automatic jump back to the main timeline, frame
label "gsm"? By an enterFrame event, which seems old school AS2? or
stage.addEventListener? Is enterFrame even the way to do it
anymore?
Lynda.com tutorials are great but I'm struggling with this.
TIA
Thomas

Using cue points to trigger events on the main timeline...

Hi--
I have successfully placed an flv (video) file (progressive
download) on the main timeline of my movie with controls to play
and pause (Flash 8 Professional). So far, so good!
NOW TWO PROBLEMS: Does anyone know how to set it up so that
when a specific cue point is reached in the video, it triggers an
action on the main timeline? In this case, once the video is over,
I want the main timeline to gotoAndPlay frame 3. Specific script to
do this would be great!
The other action I'd like to happen is that when the video
begins, it targets a scrolling text mc ("text") in the main
timeline and tells it to gotoAndPlay frame 2.
Any advice would be GREATLY appreciated!!! Many
thanks!!!

I usually start off solving problems with the livedocs, as I
recommend for anyone. The following link will take you to the
NetStream.onCuePoint handler. This is what you need.
http://livedocs.macromedia.com/flash/8/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context= LiveDocs_Parts&file=00002561.html
You can have this code on the main timeline. When the
cuepoint is hit, it will invoke this event handler and inside is
where your gotoAndPlay( ) should go.
Your other question about the text will get activated by the
same handler. Just have a conditional statement (if, switch, etc.)
to differentiate between the two events. The text itself can be
mask inside a movieclip.
Does this help?

Toolkit for CreateJS: How to control the main timeline from outside the canvas.

Hey Everyone,
I'm currently trying to do something simple, but my animation breaks whenever I attempt to change my code. I have created a basic animation in Flash where an object moves from the left side of the canvas, to the right, and then loops from the last frame to the first frame. Nothing else. The animation is simply put on the main timeline. I exported the animation with Toolkit for CreateJS through Flash's extension and the animation runs as it should. I am trying to start and stop (restarting from the first frame) the animation with mouse over and mouse off events. I want the events to fire when moused over/off a div OUTSIDE the animation's canvas tag. Is this possible with CreateJS? I'm trying to figure out how to control the main timeline without being inside the canvas tag.
Example HTML:
http://www.thephotoncore.com/testing/example_test.html
Example Code:
<section id="container">
<canvas id="canvas" width="550" height="400" style="background-color:#cccccc"></canvas>
<section id="animation_control">
    <p>Roll over to start and stop animation.</p>
</section>
</section>
Thanks again for the help!
-DJ

Hi DjPhantasy5,
All movieclips on the stage are children of the stage,
So on the "mouseover" all movieclips on the stage could be stopped with stop and on the "mouseout" all children could be restarted with gotoAndPlay like this:
function Stop()
          if (stage && stage.children)
                    var i, l = stage.children.length;
                    for (i = 0; i < l; i++)
                              var child = stage.children[i];
                              if ("stop" in child)
                                        child.stop();
function Restart()
          if (stage && stage.children)
                    var i, l = stage.children.length;
                    for (i = 0; i < l; i++)
                              var child = stage.children[i];
                              if ("gotoAndPlay" in child)
                                        child.gotoAndPlay(0);
See http://www.liauw.nl/forums/adobe/djfantasy5/index.html
But it is also possible to expose "ball1", for example, by adding it to the document.
This can be done by adding code to "ball1" like so:
/* js
document.ball1 = this;
Then the stopping of the animation would look like:
function Stop()
     if ("ball1" in document)
          document.ball1.stop();
etc.
Have fun!
Ronald

FLV/Mp3 Cue Points for Accessing Frame Labels on the Main Timeline in Flash 8

Hello,
In Flash MX2004, creating cue points for syncing locations on
flv and mp3 files to locations on the main timeline included:
1) Dragging a media component onto the stage
2) Entering file path, frame label name, and time code
information in the component inspector
3) Creating the frame label names on the main timeline, and
4) Enabling the Media Labeled Frame Cue Point Navigation
Behavior
Flash 8 documentation details a considerably different
process of creating cue points. While it discusses how to create
cue points in the flv, I have not been able to locate how to enable
linking locations in flv and mp3 files with frame labels on the man
timeline. It appears that there would need to be ActionScript
necessary to accomplish this that is not available in the docs.
Please advise what ActionScript/process would enable this
function.
Thank you!
James
[email protected]

I usually start off solving problems with the livedocs, as I
recommend for anyone. The following link will take you to the
NetStream.onCuePoint handler. This is what you need.
http://livedocs.macromedia.com/flash/8/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context= LiveDocs_Parts&file=00002561.html
You can have this code on the main timeline. When the
cuepoint is hit, it will invoke this event handler and inside is
where your gotoAndPlay( ) should go.
Your other question about the text will get activated by the
same handler. Just have a conditional statement (if, switch, etc.)
to differentiate between the two events. The text itself can be
mask inside a movieclip.
Does this help?

How to play the main timeline after a movie clip is finished playing.

Ok so here is the problem, I have the main time line with three layers: My actions layer, a music layer, and the movie clip layer.
The movie clip is an actionscript movie which calls images from an external XML file and shows them as a slideshow. What i need to do is after the last image plays, stop the movie and move the main timeline to the next scene of the main movie. Everything logical in my brain is not working, and it may be that I have been staring at this project for too long but for the life of me i can't make this work.
Any help or input would be greatly appreciated!
Thanks in advance.
Meghan

better yet, here is the whole code. With your suggestion entered...
import flash.display.BitmapData;
import gs.*;
import gs.easing.*;
import gs.plugins.*;
TweenPlugin.activate([BlurFilterPlugin]);
OverwriteManager.init();
var xml:XML = new XML();
xml.ignoreWhite = true;
_root.xmlPath == undefined ? xml.load("jake.xml") : xml.load(_root.xmlPath);
//when xml is loaded
xml.onLoad = function(succes:Boolean) {
    if (succes) {
        //position the slideshow. remember size.
        __width = Number(xml.firstChild.attributes.width);
        __height = Number(xml.firstChild.attributes.height);
        mcMask._width = mcBlack._width=mcHyper._width=__width;
        mcMask._height = mcBlack._height=mcHyper._height=__height;
        //preloader
        mcPreloader._x = __width/2;
        mcPreloader._y = __height/2;
        (new Color(mcPreloader).setRGB(Number(xml.firstChild.attributes.preloaderColor)));
        //buttons
        var buttonLoader:MovieClipLoader = new MovieClipLoader();
        var buttonListener:Object = new Object();
        buttonListener.onLoadInit = function(cButton:MovieClip) {
            if (cButton._parent == btnNext) {
                cButton._parent._x = __width-cButton._width;
            } else if (cButton._parent == btnPrev) {
                cButton._parent._x = 0;
            } else {
                cButton._parent._x = (__width-cButton._width)/2;
            cButton._parent._y = (__height-cButton._height)/2;
        buttonLoader.addListener(buttonListener);
        buttonLoader.loadClip(xml.firstChild.attributes.prevButton,btnPrev.holder);
        buttonLoader.loadClip(xml.firstChild.attributes.nextButton,btnNext.holder);
        buttonLoader.loadClip(xml.firstChild.attributes.playButton,btnPlay.holder);
        buttonLoader.loadClip(xml.firstChild.attributes.pauseButton,btnPause.holder);
        xml.firstChild.attributes.slideshowOn == "true" ? [_slideshow=true, btnPlay._visible=false] : [_slideshow=false, btnPause._visible=false];
        for (var i:Number = 0; i<xml.firstChild.childNodes.length; i++) {
            //create empty movieclip for each picture. create mask movieclip for each picture. save transition and ken burns settings for each picture. save other properties for each picture.
            mcTemp.createEmptyMovieClip("mcPhoto"+i,mcTemp.getNextHighestDepth());
            mcHolder.createEmptyMovieClip("mcPhoto"+i,mcHolder.getNextHighestDepth());
            mcHolder["mcPhoto"+i].createEmptyMovieClip("photo",mcHolder["mcPhoto"+i].getNextHighestDe pth());
            //attach text clip and set it up
            mcHolder.attachMovie("square2","mcBack",mcHolder.getNextHighestDepth());
            mcText.attachMovie("text","text"+i,mcText.getNextHighestDepth());
            mcText["text"+i].mcText._alpha = mcBack._alpha=0;
            mcBack._width = mcText["text"+i].mcText._width=__width;
            mcText["text"+i].mcText.autoSize = true;
            mcBack._height = 0;
            mcBack._y = __height;
            (new Color(mcBack).setRGB(Number(xml.firstChild.attributes.textBackColor)));
            mcHolder["mcPhoto"+i].transition = Number(xml.firstChild.childNodes[i].attributes.transition);
            var burns:Array = String(xml.firstChild.childNodes[i].attributes.kenBurns).split(";");
            mcHolder["mcPhoto"+i].burns = burns;
            mcHolder["mcPhoto"+i].time = Number(xml.firstChild.childNodes[i].attributes.time);
            mcHolder["mcPhoto"+i].src = String(xml.firstChild.childNodes[i].attributes.src);
            mcHolder["mcPhoto"+i].txt = String(xml.firstChild.childNodes[i].firstChild.nodeValue);
            mcHolder["mcPhoto"+i].url = String(xml.firstChild.childNodes[i].attributes.url);
            mcHolder["mcPhoto"+i].target = String(xml.firstChild.childNodes[i].attributes.target);
            //handle loading process. create loader objects. start "intelligent loading". set methods and actions for new newly loaded pictures.
            var photoLoader:MovieClipLoader = new MovieClipLoader();
            var photoListener:Object = new Object();
            photoListener.onLoadInit = function(cPhoto:MovieClip) {
                //transform image to bitmap
                cPhoto._visible = false;
                var tempBitmap:BitmapData = new BitmapData(cPhoto._width, cPhoto._height);
                tempBitmap.draw(cPhoto);
                var cPhoto2:Object = mcHolder["mcPhoto"+_loaded].photo;
                cPhoto2.attachBitmap(tempBitmap,1,"auto",true);
                photoLoader.unloadClip(cPhoto);
                removeMovieClip(cPhoto);
                cPhoto2._parent._visible = false;
                //remember original size
                cPhoto2._parent.width2 = cPhoto2._parent._width;
                cPhoto2._parent.height2 = cPhoto2._parent._height;
                cPhoto2._alpha = 0;
                _loaded++;
                cPhoto2._parent.loaded = true;
                if (_loaded<xml.firstChild.childNodes.length) {
                    //load next picture
                    photoLoader.loadClip(mcHolder["mcPhoto"+_loaded].src,mcTemp["mcPhoto"+_loaded]);
                if (_loaded == _index+1) {
                    //show this picture
                    showPicture(cPhoto2._parent);
            photoLoader.addListener(photoListener);
        photoLoader.loadClip(mcHolder.mcPhoto0.src,mcTemp.mcPhoto0);
//function that changes to the next photo(slideshow feature)
function nextPhoto() {
    _index++;
    if (_index == xml.firstChild.childNodes.length) {
    //if picture is loaded, just show it. if not, wait until it loads
    if (mcHolder["mcPhoto"+_index].loaded) {
        showPicture(mcHolder["mcPhoto"+_index]);
    } else {
        TweenLite.to(mcPreloader,.5,{_alpha:0});
        TweenLite.to(mcBlack,.5,{_alpha:100,onComplete:completeF});
function completeF(){
_root.gotoAndPlay("frame1_scene2");
//function that changes to the previous photo
function prevPhoto() {
    _index--;
    if (_index == -1) {
        _index = xml.firstChild.childNodes.length-1;
    //if picture is loaded, just show it. if not, wait until it loads
    if (mcHolder["mcPhoto"+_index].loaded) {
        showPicture(mcHolder["mcPhoto"+_index]);
    } else {
        TweenLite.to(mcPreloader,.5,{_alpha:100});
        TweenLite.to(mcBlack,.5,{_alpha:80});
//buttons - roll overs
btnNext.onRollOver = btnPrev.onRollOver=btnPause.onRollOver=btnPlay.onRollOver=function () {
    TweenLite.to(this,1,{_alpha:70});
btnNext.onRollOut = btnPrev.onRollOut=btnPause.onRollOut=btnPlay.onRollOut=btnNext.onReleaseOutside=btnPrev.o nReleaseOutside=btnPause.onReleaseOutside=btnPlay.onReleaseOutside=function () {
    TweenLite.to(this,1,{_alpha:100});
//buttons - next
btnNext.onPress = function() {
    if (!_transition) {
        clearTimeout(nextT);
        nextPhoto();
    } else {
        clearTimeout(nextT);
        nextT = setTimeout(nextPhoto, 500);
//buttons - previous
btnPrev.onPress = function() {
    if (!_transition) {
        clearTimeout(nextT);
        prevPhoto();
    } else {
        clearTimeout(nextT);
        nextT = setTimeout(prevPhoto, 500);
//buttons - play
btnPlay.onPress = function() {
    switchVisible(btnPlay);
    switchVisible(btnPause);
    _slideshow = true;
    if (!_transition) {
        clearTimeout(nextT);
        nextPhoto();
    } else {
        clearTimeout(nextT);
        nextT = setTimeout(nextPhoto, 500);
//buttons - pause
btnPause.onPress = function() {
    switchVisible(btnPlay);
    switchVisible(btnPause);
    _slideshow = false;
    clearTimeout(nextT);
//function that animates text(html for each picture)
function inText(cPhoto:Object) {
    if (cPhoto.txt != "undefined") {
        mcText["text"+_index].mcText.htmlText = cPhoto.txt;
        mcText["text"+_index].mcText._y = mcBack._y-mcText["text"+_index].mcText._height-4;
        TweenMax.to(mcText["text"+_index].mcText,0,{blurFilter:{blurX:15, blurY:15, quality:1}});
        TweenMax.to(mcText["text"+_index].mcText,Number(xml.firstChild.attributes.textSpeed),{blu rFilter:{blurX:0, blurY:0}, _alpha:100});
        TweenLite.to(mcBack,Number(xml.firstChild.attributes.textSpeed),{_alpha:Number(xml.firstC hild.attributes.textBackOpacity), _height:mcText["text"+_index].mcText._height+7});
    } else {
        mcText["text"+_index].mcText.htmlText = "";
        TweenLite.to(mcBack,Number(xml.firstChild.attributes.textSpeed),{_alpha:Number(xml.firstC hild.attributes.textBackOpacity), _height:0});
function outText(cPhoto:Object) {
    TweenLite.to(mcBack,.5,{_alpha:0});
    TweenLite.to(mcText["text"+_index2].mcText,.5,{_alpha:0});
//function that applies the ken burns effect to a specific photo
function kenBurns(cPhoto:Object) {
    //reset size and position
    cPhoto.photo._xscale = cPhoto.photo._yscale=Number(cPhoto.burns[0]);
    cPhoto.photo._x = returnPosition(cPhoto.burns[2], cPhoto.photo._width, cPhoto.photo._height, mcMask._width, mcMask._height).__x;
    cPhoto.photo._y = returnPosition(cPhoto.burns[2], cPhoto.photo._width, cPhoto.photo._height, mcMask._width, mcMask._height).__y;
    //start effect
    TweenLite.to(cPhoto.photo,cPhoto.transition+Number(cPhoto.time)+1,{_xscale:Number(cPhoto. burns[1]), _yscale:Number(cPhoto.burns[1]), _x:returnPosition(cPhoto.burns[3], cPhoto.width2, cPhoto.height2, mcMask._width, mcMask._height).__x, _y:returnPosition(cPhoto.burns[3], cPhoto.width2, cPhoto.height2, mcMask._width, mcMask._height).__y, ease:Linear.easeNone});
//function that shows a picture(transition function)
function showPicture(cPhoto:Object) {
    for (var i:Number = 0; i<xml.firstChild.childNodes.length; i++) {
        if (i == _index || i == _index2) {
            mcHolder["mcPhoto"+i]._visible = true;
        }else{
            mcHolder["mcPhoto"+i]._visible = false;
    cPhoto.swapDepths(mcHolder.getNextHighestDepth());
    setTimeout(hideOld,cPhoto.transition*1000,mcHolder["mcPhoto"+_index2]);
    //text
    outText(mcHolder["mcPhoto"+_index2]);
    _index2 = _index;
    inText(cPhoto);
    kenBurns(cPhoto);
    TweenLite.to(mcPreloader,.5,{_alpha:0});
    TweenLite.to(mcBlack,.5,{_alpha:0});
    //transition variable
    _transition = true;
    clearTimeout(transT);
    transT = setTimeout(switchTransition, cPhoto.transition*1000);
    cPhoto.photo._alpha = 0;
    TweenLite.to(cPhoto.photo,cPhoto.transition,{_alpha:100});
    if (_slideshow) {
        //if slideshow is on
        nextT = setTimeout(nextPhoto, (cPhoto.transition+cPhoto.time)*1000);
function hideOld(what:Object){
//hyperlinks
mcHyper.useHandCursor = true;
mcHyper.onPress = function() {
    if (mcHolder["mcPhoto"+_index].url != "undefined") {
        getURL(mcHolder["mcPhoto"+_index].url, mcHolder["mcPhoto"+_index].target);
//function that returns a number position from a given "compass position"(for the ken burns effect)
function returnPosition(pos:String, __width:Number, __height:Number, __width2:Number, __height2:Number):Object {
    var returnObj:Object = new Object();
    switch (pos) {
        case "TL" :
            returnObj.__x = 0;
            returnObj.__y = 0;
            break;
        case "TC" :
            returnObj.__x = -(__width-__width2)/2;
            returnObj.__y = 0;
            break;
        case "TR" :
            returnObj.__x = -(__width-__width2);
            returnObj.__y = 0;
            break;
        case "ML" :
            returnObj.__x = 0;
            returnObj.__y = -(__height-__height2)/2;
            break;
        case "MC" :
            returnObj.__x = -(__width-__width2)/2;
            returnObj.__y = -(__height-__height2)/2;
            break;
        case "MR" :
            returnObj.__x = -(__width-__width2);
            returnObj.__y = -(__height-__height2)/2;
            break;
        case "BL" :
            returnObj.__x = 0;
            returnObj.__y = -(__height-__height2);
            break;
        case "BC" :
            returnObj.__x = -(__width-__width2)/2;
            returnObj.__y = -(__height-__height2);
            break;
        case "BR" :
            returnObj.__x = -(__width-__width2);
            returnObj.__y = -(__height-__height2);
            break;
    return returnObj;
function switchTransition() {
    _transition == true ? _transition=false : _transition=true;
function switchVisible(obj:Object) {
    obj._visible == true ? obj._visible=false : obj._visible=true;
mcTemp._x = -10000;
//mouse testing
var mouse_dx:Number = _xmouse;
var mouse_dy:Number = _ymouse;
var mouseSpeed:Number = 1;
function checkPosition(Void):Void {
    if (_xmouse<mouseSpeed || _xmouse>(Stage.width-mouseSpeed) || _ymouse<mouseSpeed || _ymouse>(Stage.height-mouseSpeed)) {
        //mouse outside - hide buttons
        TweenLite.to(btnPrev,.5,{_alpha:0});
        TweenLite.to(btnNext,.5,{_alpha:0});
        TweenLite.to(btnPlay,.5,{_alpha:0});
        TweenLite.to(btnPause,.5,{_alpha:0});
    } else {
        //mouse inside
        TweenLite.to(btnPrev,.5,{_alpha:100});
        TweenLite.to(btnNext,.5,{_alpha:100});
        TweenLite.to(btnPlay,.5,{_alpha:100});
        TweenLite.to(btnPause,.5,{_alpha:100});
checkPosition(Void);
var mouseListener:Object = new Object();
mouseListener.onMouseMove = function():Void {
    mouse_dx = Math.abs(mouse_dx-_xmouse);
    mouse_dy = Math.abs(mouse_dy-_ymouse);
    mouseSpeed = mouse_dx>mouse_dy ? mouse_dx : mouse_dy;
    mouseSpeed += 1;
    checkPosition(Void);
    mouse_dx = _xmouse;
    mouse_dy = _ymouse;
Mouse.addListener(mouseListener);
//global variables
var this2:Object = this;
var __width:Number;
var __height:Number;
var _index:Number = 0;
var _index2:Number = -1;
var _loaded:Number = 0;
var nextT:Number;
var transT:Number;
var _slideshow:Boolean = true;
var _transition:Boolean = false;
Stage.scaleMode = "noScale";
Stage.showMenu = false;
Stage.align = "TL";

How can I reference the main timeline on a swf once it was loaded into another?

I have an swf with some custon animation functions using actionscript 3. I'm refering to the main timeline with Movieclip(root) and it works just fine.
However, this swf is going to be loaded inside another (a custom player), and when that happends, everything stops working.
I think it's because the Movieclip(root) is now referencing to the loader swf and not the loaded anymore, but I just can't find any information on how to fix that.

This is basically what I´m doing here:
I'm placing this code on frame 1, and calling the function textAnimate() whenever I need to insert some text.
// This is a variable I created for tracking the timeline
var base:MovieClip = MovieClip(root);
function textAnimate(movieName:String, espera:Number):void {
          //var espera:Number = 1; //Waiting time
          var objeto:MovieClip = base[movieName]; //Variable to select the object
          var posFinal:Number = objeto.x; // Object position
          var posEnter:String = "-160"; // Animation start (relative)
          var posExit:String = "+160"; // Animation end (relative)
          // enter animation
          TweenMax.from(objeto, 1, {x:posEnter, alpha:0, blurFilter:{blurX:40}, ease:Back.easeOut});
          //call exitAnimation() after X seconds
          TweenMax.delayedCall(espera,exitAnimation);
          //exit animation
          function exitAnimation() {
                    TweenMax.to(objeto, 1, {x:posExit, alpha:0, blurFilter:{blurX:40}, ease:Back.easeIn});
The swf works fine, but once it´s loaded into the player, nothing works anymore. Unfortunately, I don't have the code for the player, and can't change anything about it... :/

How do I recerence Movie Clips on the Main Timeline from inside a class?

Hey everyone, this might be a stupid question but I thought
I'd ask cause it's making me nuts. I'm all of 2 days into AS3
(coming from not using Flash at all in YEARS) so feel free to
consider me ignorant. I do have plenty of application development
experience in other areas though.
I can't seem to create a class that can reference an instance
of a movie clip on my main timeline. I'd post code of what I've
tried but I've gone through so many desperate edits & wild
guesses that it was just garbled junk before I deleted it all.
Basically here's how I figured Flash could work, though maybe
it doesn't work this way at all.
I'm assuming that with AS 3 being so big on being a true
object oriented environment, I wouldn't need to mix my code and
interface together. Preferably I'd be using the Flash authoring
tools just to design my interface. Create a button... place it
somewhere... give it an instance name. Roughly the equivilant of
Apple's InterfaceBuilder for those of you that might be familiar
with Cocoa development. I can see maybe having to put a few lines
of ActionScript onto frame 1 (though really I'm hoping Flash would
have a better method of kicking off the application at this point
that using code tied to frames) to load my classes & such, but
after that I'd like all of my code to be held in external class
files.
So maybe I've got:
Interface.fla - My interface
Button_1
Button_2
TextField_1
Main.as - My main controller class using to handle all of my
applications behavior
SomeClass.as - Some helper Class
SomeOtherClass.as - Some helper Class
Main.as would have instructions in its initialization method
to go ahead & attach events to buttons & initialize
anything else that needs to happen when the application starts.
From there on it would all be objects communicating back &
forth. Button_1 would get clicked with would fire
Main.someMethod(). Main.someMethod() would then do it's thing and
set the value of TextField_1. All very clean & code is very
separated from interface.
Unfortunately I can't for the life of me figure out how AS3
classes reference each other like that. There doesn't seem to be
any kind of a global 'root' or '_root' I can use to locate any
movie clips on the stage. I've searched the help & the web for
any kind of simple tutorial but to no avail. My job has tasked me
with building a flash app for a project but I'd really rather not
have a tone of ActionScript just shoved into frame 1. That just
seems... ugh! (::shudder::)
Can someone maybe point me in the right direction here? I'm
really willing to do my homework but I can't seem to locate the
info I need to get started. Also, is there an ActionScript IRC
channel or something maybe?
Thanks,
Cliff

I worked with the problem last night and the solution I
started coming to involved creating my own custom document class
based off which extends MovieClip. My thought is that way I have
access to the initialization routine of the timeline itself and
that all of the elements on the main timeline should be
"properties" of my custom class.
Is this correct? Is there a down side to doing this & if
so what is it & why?
Also, just for my reference, the last time I did anything
with ActionScript I think I was using '_root' to target the main
timeline. WHat are the global variable names in AS 3? Is it just
'root' & 'stage' or 'Root' & 'Stage' or what?

In actionscript 3.0 how do i make a nested movie clip button go to a frame on the main timeline

I am making a website based in flash actionscript 3.0 i have a button nested in its own movie clip, because I have the button expanding to be able to read it i have figured out the only way to do this is by creating it as a movie clipa nd inside the movie clip creating it as a button
I added an event listener to the blog button by saying,
blog.addEventListener(MouseEvent.ROLL_OVER,gotoblog);
function gotoblog(evtobj:MouseEvent){
gotoAndStop(2)
this part of the code works it goes to the 2nd frame of the timeline it is in and stops wich is a blown up version of the origanal symbol
i added on frame 2 a second command
blog.addEventListener(MouseEvent.CLICK.gotoblogpage);
function gotoblogpage(evtobj:MouseEvent){
gotoAndStop("blogframe")
trace("the blog button was clicked")
i have named the symbol blog and have name the frame of where the blog page is going to be "blogframe" this line of code at the bottom is where i run into trouble the output window in Flash is saying "The blog button was clicked" just like i want it to. no errors are accouring why than is the playhead not going to frame "blogframe"? if the button is working when i click it the code is right i belive the problem here is it does not want the playhead to go to the frame i want it to. So i gues my question is, how can i make a button withing a movie clip interact with the main timeline?

I have a similar problem if could please help me i'd really apreciate it!!
So i have a looping animation of some thumbnails, the hierarchy goes like this
Scene1(main timeline) -> imgBar(MC)->imgBarB(MC within the imgBar MC)
My buttons symbols are in the last MC "imgBarB" where i have this code:
ss1.addEventListener(MouseEvent.CLICK, OneButtonClicked);
function OneButtonClicked(event:MouseEvent):void{
MovieClip(root).gotoAndStop("ssbox1");
I want to control the Btns in my "imgBarB" MC to play a labeled frame(named "ssbox1") on another MC on the main timeline,this other MC goes like this:
Scene1(main timeline)->ssbox_mc(MC where my labeled frame is)

How to call a function in a class from the main timeline?

Hey Guys
I have a project in Flash with four external AS files, which are linked to items in the library using AS linkage.
What I want to do is call a function in one of these files from the main timeline, how would I go about doing this? I'm not currently using a document class, most of the code is in Frame 1 of the main timeline.
Thanks

// change type to the class name from the instance
ClassNameHere(this.getChildByName('instance_name')).SomeFunction();

How do I set a variable on the main timeline from within a symbol?

Just getting started with Animate and coming to it from Flash, as may be apparent from my question. How do you set a variable to the main timeline from within a symbol?
I have 24 pairs of clickable elements, each in their own symbols, and all 24 of those symbols sit inside another symbol. I want all 24 to be able to set the same global variable when clicked. I can't find that this question is addressed anywhere, which makes me think I may be stuck in a Flash mindset and approaching the task in the wrong way. (There are however MANY discussions of how to address objects at different levels in the hierarchy. That's well covered.)
Relatedly, how do you access a function on the main timeline from within a symbol?
Adobe should consider putting together a support page (or pages) just for folks migrating form Flash. In the materials I've encountered so far there seems to be a studied effort to refrain from mentioning Flash in any way. I imagine there are a lot of people out there like me who have a deep background in Flash coding, but are just getting started with Animate. We don't need help with most of the basic concepts, but we may still have some pretty basic questions about how to accomplish some things in Animate because our Flash knowledge is getting in the way.

Hi Bill,
There are plenty of threads on here about scope, but here's one way to create a global variable:
// code on Stage.compositionReady
sym.myGlobalVar = 1;
Then, anywhere in your project, you can check/set that var like so:
sym.getComposition().getStage().myGlobalVar = 2;
And here's one way to create a global function:
// code on Stage.compositionReady
sym.myGlobalFunction = function(){
console.log('myGlobalFunction');
Then, anywhere in your project, you can call that function like so:
sym.getComposition().getStage().myGlobalFunction();

How to control the main timeline from within a symbol?

I have a small world map as a symbol called "verden" and I want the user to click Europe, Asia, or Africa and jump to named labels in the main timeline.
http://www.dagbladet.no/grafikk/neshorn/neshorn.html
On the main timeline a have the label "intro" with a Stop action and the label "europa". At label "europa" I have a symbol also called "europa" which has a display of None at label "intro" and On at the label "europa".
The animation never goes to label "europa"
I have this code on europa in the symbol "verden" :
// insert code for mouse click here
sym.getComposition().getStage().getSymbol("europa").play("europa");
The files are on Dropbox here
Update, now it works:
sym.getComposition().getStage().play("europa");

Hi Bill,
There are plenty of threads on here about scope, but here's one way to create a global variable:
// code on Stage.compositionReady
sym.myGlobalVar = 1;
Then, anywhere in your project, you can check/set that var like so:
sym.getComposition().getStage().myGlobalVar = 2;
And here's one way to create a global function:
// code on Stage.compositionReady
sym.myGlobalFunction = function(){
console.log('myGlobalFunction');
Then, anywhere in your project, you can call that function like so:
sym.getComposition().getStage().myGlobalFunction();

GotoAndPlay with a _mc on the main timeline

Similar Messages

Maybe you are looking for