Gpib-enet v1.3 does not work under Solaris 8
Recently I have updated my Sparc-workstation from solaris 7 to Solaris 8. I have installed GPIB-ENET version 1.3. Wenn I started ibic->ibfind gpib1, an error ENEB appeared. The gpib even did not respond to ping. After reset the gpib, it can respond to ping, but the ibic did not work.
Referring to http://www.ni.com/support/gpib/versions.htm#sun you need the driver version 1.4
Similar Messages
-
LSI1030 scsi adapter does not work under solaris 10 on t5240 sparc server
hi all,
i have following LSI1030 scsi pci-x card in t5240 server with solaris 10u8 ..
## prtpicl -v ## director's cut
LSILogic,scsi (scsi-2, ad0000061e)
:DeviceID 0x8
:UnitAddress 8
:vendor-id 0x1000
:device-id 0x30
:revision-id 0xc1
:subsystem-vendor-id 0x103c
:subsystem-id 0x322a
:class-code 0x10000
:cache-line-size 0x10
:interrupts 00 00 00 01
:min-grant 0x10
:max-latency 0x6
:latency-timer 0x40
:devsel-speed 0x1
:66mhz-capable
:fcode-rom-offset 0xa800
:device_type scsi-2
:wide 0x10
:version 1.00.38
:reg
00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 07 40 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00
03 07 40 14 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
03 07 40 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
02 07 40 30 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00
:model LSI,1030
:compatible pci103c,30
:assigned-addresses
81 07 40 10 00 00 00 00 00 00 10 00 00 00 00 00 00 00 01 00
82 07 40 14 00 00 00 00 05 20 00 00 00 00 00 00 00 02 00 00
82 07 40 1c 00 00 00 00 05 22 00 00 00 00 00 00 00 02 00 00
82 07 40 30 00 00 00 00 05 30 00 00 00 00 00 00 00 10 00 00
:mpt-version 1.02
:firmware-version 1.03.39.00
:devfs-path /pci@500/pci@0/pci@c/pci@0/LSILogic,scsi
:binding-name LSILogic,scsi
:instance -1
:_class scsi-2
:name LSILogic,scsi
## prtdiag -v # director's cut
MB lsilOGICLSILogic,scsi LSI,1030
/pci@500/pci@0/pci@c/pci@0/LSILogic,scsi
## prtconf -v # director's cut
LSILogic,scsi (driver not attached)
tape (driver not attached)
disk (driver not attached)
{0} ok probe-scsi-all
/pci@500/pci@0/pci@c/pci@0/LSILogic,scsi@8
MPT Version 1.02, Firmware Version 1.03.39.00
Initiator ID is 7
Target 3
Unit 0 Removable Tape HP Ultrium 2-SCSI S63Di am unable to run this controller under solaris 10, is it even possible ??
regards, daniel
ps. i did reconfigure reboot and tried to tweak a mpt driver by hand, i also checked a patches for mpt driver ..# prtconf -v | grep LSI
LSILogic,scsi, instance #0
dev_path=/pci@500/pci@0/pci@c/pci@0/LSILogic,scsi@8:devctl
dev_path=/pci@500/pci@0/pci@c/pci@0/LSILogic,scsi@8:scsi
# cfgadm -lv c2
Ap_Id Receptacle Occupant Condition Information
When Type Busy Phys_Id
c2 connected unconfigured unknown
unavailable scsi-bus n /devices/pci@500/pci@0/pci@c/pci@0/LSILogic,scsi@8:scsi
# iostat -En ## cut
rmt/0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: HP Product: Ultrium 2-SCSI Revision: S63D Serial No:thanks, resolved .. i added this device (mpt "pci103c,30") in /etc/driver_aliases
regards -
Flash player does not work under one user account.
Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FSAny update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts??? -
Nautilus-open-terminal does NOT work under x86_64
I found the latest nautilus-open-terminal v0.9-1
http://aur.archlinux.org/packages.php?ID=5224
does NOT work under x86_64!
There was no open-terminal menu item in the context menushaohao wrote:I found the latest nautilus-open-terminal v0.9-1
http://aur.archlinux.org/packages.php?ID=5224
does NOT work under x86_64!
There was no open-terminal menu item in the context menu
I've recompiled almost 40 days ago and i've had no problem at all.
Have you tried logging out before trying? -
JCombox does not work under linux (fedora) could you help me???
Hi All,
I am implementing a GUI for a linux application. This GUI works fine under windows system. But the JCombobox does not work under Linux system. Would you help me to solve it? Thank you very much!..
The problem is that I cannot select any other item except the first item in the dropdown box of JCombobox. There is no event generated when I click the combobox, while events are generated for other Buttons.
This problem exists for the following code when I maximize the window. When the window is minimize to some extend in my problem, it is OK.
Here is the simplify code:
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.Serializable;
import java.util.Vector;
import javax.swing.ComboBoxModel;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.event.ListDataEvent;
import javax.swing.event.PopupMenuEvent;
import javax.swing.event.PopupMenuListener;
import java.awt.event.*;
import javax.swing.*;
//carmen
import javax.swing.filechooser.*;
import javax.swing.event.*;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.border.*;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
import java.io.*;
import java.util.*;
import java.lang.String.*;
public class Test extends JFrame
private JComboBox jComboBox1;
private JComboBox jComboBox2;
private JPanel contentPane;
private JTabbedPane jTabbedPane1;
//Main Tab
private JPanel Main;
private JPanel OutputSimSet;
private JPanel Test;
private JPanel ScriptGenTab;
private JPanel ResultTab;
//Result Tab
private JPanel SimResult;
public Test()
super();
//initializeComponent();
contentPane = (JPanel)this.getContentPane();
jTabbedPane1 = new JTabbedPane();
Main = new JPanel();
OutputSimSet = new JPanel();
Test = new JPanel();
ScriptGenTab = new JPanel();
ResultTab = new JPanel();
SimResult = new JPanel();
jComboBox1 = new JComboBox(
new String[]{"Item 1","Item 2", "Item 3"});
jComboBox1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
System.out.println("Yeah");
jComboBox2 = new JComboBox(
new String[]{"Item 1","Item 2", "Item 3"});
jComboBox2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
System.out.println("Yeah");
// jTabbedPane1
jTabbedPane1.addTab("Main", Main);
jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
jTabbedPane1.addTab("Simulation Result", ResultTab);
jTabbedPane1.addChangeListener(new ChangeListener() {
public void stateChanged(ChangeEvent e)
jTabbedPane1_stateChanged(e);
// contentPane
contentPane.setLayout(new BorderLayout(0, 0));
contentPane.add(jTabbedPane1, BorderLayout.CENTER);
// Main
//Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
Main.setLayout(new BorderLayout(0, 0));
Main.add(OutputSimSet,BorderLayout.NORTH);
OutputSimSet.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
OutputSimSet.add(Test, 0);
Test.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
Test.add(jComboBox1,0);
//ResultTab
ResultTab.setLayout(new BorderLayout(0, 0));
ResultTab.setBorder(new TitledBorder(""));
ResultTab.add(SimResult, BorderLayout.NORTH);
SimResult.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
SimResult.add(jComboBox2,0);
// Test
this.setTitle("Test");
this.setLocation(new Point(0, 0));
this.setSize(new Dimension(600, 500));
this.setVisible(true);
public void initializeComponent()
/** Add Component Without a Layout Manager (Absolute Positioning) */
private void addComponent(Container container,Component c,int x,int y,int width,int height)
c.setBounds(x,y,width,height);
container.add(c);
// TODO: Add any appropriate code in the following Event Handling Methods
private void jTabbedPane1_stateChanged(ChangeEvent e)
System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
// TODO: Add any handling code here
// TODO: Add any method code to meet your needs in the following area
// TODO: Add any appropriate code in the following Event Handling Methods
private void jComboBox1_actionPerformed(ActionEvent e)
System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
Object o = jComboBox1.getSelectedItem();
System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
// TODO: Add any handling code here for the particular object being selected
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
Test frame = new Test();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}package oct03_JCBox;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.FlowLayout;
import java.awt.Point;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTabbedPane;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
public class Test extends JFrame
private JComboBox jComboBox1;
private JComboBox jComboBox2;
private JPanel contentPane;
private JTabbedPane jTabbedPane1;
//Main Tab
private JPanel Main;
//private JPanel OutputSimSet;
//private JPanel Test;
private JPanel ScriptGenTab;
private JPanel ResultTab;
//Result Tab
//private JPanel SimResult;
public Test()
super();
//initializeComponent();
contentPane = (JPanel)this.getContentPane();
jTabbedPane1 = new JTabbedPane();
Main = new JPanel();
ScriptGenTab = new JPanel();
ResultTab = new JPanel();
// OutputSimSet = new JPanel();
// Test = new JPanel();
// SimResult = new JPanel();
jComboBox1 = new JComboBox(
new String[]{"Item 1","Item 2", "Item 3"});
jComboBox1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
System.out.println("Yeah");
jComboBox2 = new JComboBox(
new String[]{"Item 1","Item 2", "Item 3"});
jComboBox2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
System.out.println("Yeah");
// Main
//Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
Main.add(jComboBox1);
//ResultTab -----
ResultTab.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
ResultTab.add(jComboBox2);
// jTabbedPane1
jTabbedPane1.addTab("Main", Main);
jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
jTabbedPane1.addTab("Simulation Result", ResultTab);
jTabbedPane1.addChangeListener(new ChangeListener() {
public void stateChanged(ChangeEvent e)
jTabbedPane1_stateChanged(e);
// contentPane
contentPane.setLayout(new BorderLayout(0, 0));
contentPane.add(jTabbedPane1, BorderLayout.CENTER);
// Test
this.setTitle("Test");
this.setLocation(new Point(0, 0));
this.setSize(new Dimension(600, 500));
this.setVisible(true);
public void initializeComponent()
// /** Add Component Without a Layout Manager (Absolute Positioning) */
// private void addComponent(Container container,Component c,int x,int y,int width,int height)
// c.setBounds(x,y,width,height);
// container.add(c);
// TODO: Add any appropriate code in the following Event Handling Methods
private void jTabbedPane1_stateChanged(ChangeEvent e)
System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
// TODO: Add any handling code here
// TODO: Add any method code to meet your needs in the following area
// TODO: Add any appropriate code in the following Event Handling Methods
// private void jComboBox1_actionPerformed(ActionEvent e)
// System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
// Object o = jComboBox1.getSelectedItem();
// System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
// // TODO: Add any handling code here for the particular object being selected
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
Test frame = new Test();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
} Try this - you use too many unnecessary JPanels.
Which way you prefer with actionPerformed should work either way.
I think your problem was too many unnecessary Panels and set all attributes before it is added, perhaps,
not add the panel first and then try to set attributes like layout, color, etc... -
[svn:cairngorm3:] 21174: Landmark does not work under complex situations
Revision: 21174
Revision: 21174
Author: [email protected]
Date: 2011-04-29 11:21:00 -0700 (Fri, 29 Apr 2011)
Log Message:
Landmark does not work under complex situations
https://bugs.adobe.com/jira/browse/CGM-39
Ticket Links:
http://bugs.adobe.com/jira/browse/CGM-39
Modified Paths:
cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/core/EnterAndExi tInvoker.as
cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/waypoint/Waypoin tHandler.asHi John,
1) I like that the new model adds parameterization. It's cleaner than pulling in parameters from pre-set variables. However, the given example didn't actually make much use of it. The only non-constant parameter multiply-used in the example is the "table" variable. Seems like a lot of work for not a lot of gain, at least in this case?
2) I am cautious that this new template/model condenses the paradigm sooo much, that it is no longer clear where XPath is involved vs straight constant tag names. Yes, Adobe's example is overly-expanded but that's common in code meant to be a demonstration.
3) I also am cautious that the example intermingles direct node creation into the XPath search/processing chain. I've learned to be VERY careful with this. It only can work when the changes made do not interfere with the rule processing. In my model, I simply avoid it completely (by not making node-position or node-add/remove/move changes until after tree parsing is complete.) This will always be a safe model.
Bottom line: while I very much appreciate the parameterization and lintability (is that a word? Sure makes sense to me )... I think I would still define each rule separately rather than bring them all together as an inline array in the rule processing call. To me it seems sooo condensed that the XPath meaning can become lost. (Would someone recognize that //para/section-head is actually an XPath statement that could (in another situation) be //para/* or //para/following-siblings::* ... while some of the other strings are exact-match tag names?)
I realize this is all a matter of style... my preference: clarity for the future reader, particularly when the future reader is me a year later who forgot what all those parameters and embedded methods were all about ...
Blessings,
Pete -
Swedish chars ��� not working under Solaris
Hi All,
I created the following little code and it is not working under Solaris 7, JDK1.4.1_01. (also tested some other but does not work)
public class HelloSweden
public static void main(String [] args)
String newName="���";
String charsetName = "iso-8859-2";
byte [] s = {(byte)229, (byte)228, (byte)246};
try
newName = new String(s, 0, s.length, charsetName);
catch ( java.io.UnsupportedEncodingException e )
System.err.println(e.getMessage());
e.printStackTrace();
System.out.println("new name is: "+newName);
for(int i=0; i<newName.getBytes().length; i++)
System.out.println(i+"."+":"+newName.getBytes());
The problem is that on Solaris 7 the output is:
new name is: ???
0.:63
1.:63
2.:63
Whereas on Linux it works fine:
new name is: ���
0.:-27
1.:-28
2.:-10
I also tried the "javac -encoding iso8859-1" option but no use.
Could anybody help?
Thnx,
GFI also tried the "javac -encoding iso8859-1" option
but no use.
Was the output exactly the same or were the numbers correct, at least?
You may need to compile with:
javac -encoding ISO-8859-1 ClassName.java
and then run with:
java -Dfile.encoding=ISO-8859-1 ClassName
You can set the character encoding explicitely like that. The character encoding depends on locale settings; if you set LC_ALL to a Swedish locale ("sv_SE"?) javac and java should start using the correct encodings automatically. -
D-Link 562M modem does not works in Solaris 10 (?)
I use D-Link 562M external USB 56K modem. Modem works in Windows but does not works in Solaris 10 (?). Help me!
pat.gibbons wrote:
Not supported yet but will be in a future Solaris Express release.Many USB modems are not really modems but the entire signal processing is done by the host computer. Such "winmodems" require signal processing software which is quite complex. I do not think that such modems are supported in the following versions of Solaris.
If the 562M is NOT such a modem (but a "real" one) it should be quite easy to adapt a driver to work with this modem.
Martin -
Canon ScanLide 20 does not work under Snowleopard
I have a Canon ScanLide 20 USB and on the official Canon web site, the driver are not available for Mac OS X 10.6. I finished the complete passage to mac last month with an iMac 21,5" following a Macbook 13,1 unibody, now I am a fully Apple, but now I have some problem with this scanner, the problem with HP laserjet solved reading this forum.
please help me, I download the driver dor MAC OS X 10.4 and canon scantool box run but not perfectly, and the plug in does not work.
How can I solve this problem? who have some ideas?
Thanks in advance for support!
StèHello
My first guess is that an undocumented yet siginifcant change made in 10.6 betrayed your code in open handler.
Try replacing your open handler with this :
on open my_files
repeat with f in my_files
set f's contents to f as alias
end repeat
-- orginal code in open handler here
end open
*Replacement code has three-line repeat block at the beginning of open handler to gurantee the received list - my_files - to be an alias list.
If this change fix the problem, it should be Apple's fault to have let your script fail under new OS.
(Under every Mac OS prior to 10.6, open handler receives a list of alias object(s) from droplet mechanism, whereas under 10.6, it receives a list of some «class bmrk» object(s) of which details have not been documented (as far as I know). And in certain aspects, «class bmrk» object and alias object behave differently, which can break existing script's functionality.)
cf.
Topic : Leopard to Snow Leopard problem
http://discussions.apple.com/thread.jspa?threadID=2204130
Good luck,
H -
html:link action="" input type="button"... does not work under IE browser
Greeting,
I have the following codes in struts1.3.5. It works fine under Firefox, but it does not work at all under Internet Explore (IT) at all. Any clues why under IE it does not work?
<html:link action="/private/search">
<input
type="button"
value="Search"
class="search-button">
</html:link>
Thanks a lot!This would probably generate a HTML in which there will be a button inside anchor tag.
This is not a standard HTML feature and no wonder this is not supported by IE. I copied the generated html codes into test.html to try on IE, the button does not work at all.
Firefox is probably lenient here. True. test.html works in Firefox.
You might want to just have a link or do a form submission on button click.The action designed does not need an actionForm. I updated my code to :<html:button onclick="location.href='processSearch'"
property ="Search"
value ="Search">
</html:button>
And now both Firefox & IE works fine.
Thanks a lot! -
Russell Brown " Image Processor Pro " does not work under CC
I just switched from Photoshop CS 6 to CC and use Russell Brown "Image Processor Pro". Unfortunately does not work that under CC. I also want to install the fix but we probably only applied to CS6.
Does anyone have a solution to the problem.
Here the German error message: https://dl.dropboxusercontent.com/u/12684660/CC_IPP.jpg
Post translated with google Translater from the German.I installed Image Processor Pro quite some time ago. I extracted the extension package and just copied the two files "Image Processor Pro.xml" and "Image Processor Pro.jsx" into Photoshop's versions Presets\Scripts. I normally install things I add to Photoshop into my own folders outside any Adobe installation folder. Image Processor Pro is an exception because I did not want to modify X's code. Image Processor Pro is coded in a way to find which version of Photoshop is being run from and looks for its default xml file in that version Presets\scripts\ folder.
The script may save your modficaions to its defalt xml file into you user ID application data areas. And you can save you own Image Processor Pro presets configurations.
I run Windows not Mac though. -
MailInfo does not work under Y-OS X
Under the new Yosemite, MailInfo (to see new mail, etc), does not work. Does not open.
Any free substitute to do the same job?
Thanks for your help.
Cheers.Thank You!
In my case (SFR- ALCATELL modem X220D)
http://www.alcatel-mobilephones.com/global/content/view/full/21572
Installation of new 64 bit driver helped.
See documentation rared width for istruction. -
Getting input from mouse-wheel: does not work under windows/IE
Hi
I have built an applet that extends JApplet. To it I have added a class that extends JPanel implements MouseListener, MouseWheelListener, MouseMotionListener.
I collect input using the method
public void mouseWheelMoved(MouseWheelEvent e){
do stuff...
I have build this on a mac and tested it in firefox and it works fine. But on xp/vista internet explorer, the applet does not respond to mousewheel input. On mac osx /safari it does not work either.
Is there any solution to this problem?
Best regards, Carlis.Just for luck, try setting the JPanel focusable.panel.setFocusable(true);If that doesn't make a difference, you need to post a [_Short, Self Contained, Compilable and Executable, Example Program (SSCCE)_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
db -
Epson R2880 printer does not work under 10.6 - how to install 10.5?
Similar to the many problems reported here, my brand new still in production mid-to-high-end printer from Epson does not work. I set aside my Epson 1270 when I realized that they would never support anything that old, but to not support a current expensive model!?!? I would never have bought it except that their web site claims 10.6 compatible drivers. Not true. I can use it as a text printer, but have none of the photo print options that I paid for.
Running on an iMac which I bought just before 10.5 came out. I never loaded 10.5. I paid the big bucks for a full upgrade from 10.4 to 10.6. I have found a 10.5 retail package. Once it arrives, what do I need to do to write 10.5 over the newer 10.6? Do I need to backup and erase everything, reinstall 10.4 and then 10.5? Or is there a reasonably reliable way to just load 10.5?The easiest fix to this issue that I've found is to just use Sierra's software.
It means you don't get the nice built-in WWAN integration of 10.6, but whatever--it works!
http://www.macupdate.com/info.php/id/25530/sierra-wireless-watcher -
HP Laserjet P1005 does not work under Mac OS X 10.6
Driver is not listed and downloading the driver from HP still does not work. Guess HP has not yet updated for Snow Leopard. Anyone have a work around for now?
I use this little black and white laserjet for all of my documents. Also have a few color Epsons but I do not want to use those for quick and dirty documents.
Any help would be much appreciated.
KenThe temporary solution (works good) is to download old drivers for HP P1000-1500 series (v.1.04) at following link:
http://driverscollection.com/?file_cid=399489231573f9b4ad62f5159c3
Sorry for my bad english (I'm Italian)
Maybe you are looking for
-
Would like to know why I have twice removed from the account for $ 1
Would like to know why I have twice removed from the account for $ 1
-
I downloaded V4 as requested by Firefox, after reading a note saying it supports all systems and languages only to find that it is not compatible with my Mac G5 on OSX 10.4.11. During the upgrade process I deleted V3.6, so now I have no Firefox and p
-
Revert to Original not working
I am contemplating upgrading from iPhoto5 to iPhoto6, but have noticed a bug in my iPhoto5 directory that I think that I should fix before the upgrade. A number of my edited photos will not allow me to revert to original. The option is grayed out. Lo
-
How do I record lossless audio?
Thinking of getting a Pono player and will need to burn audio using ALAC/FLAC. Have no idea what all this is. Any suggestions on where to go for information?
-
Complaint about my bill and customer service - never expected from Verizon
I have several lines and I live and work out of the country for a big % of the year. Also have one of my CEO's lines on my plan. Our average monthly bill is 6-7K USD. Recently, it popped up to 10,000 USD. Verizon was nice enough to drop it a bit, as