GPIB non reconnu par Measuremen​t and Automation

Bonjour,
J'ai installe une carte "GPIB-PCI 12.002 (AMCC)" sur ma machine qui tourne sous Windows 2000.
Windows reconnait parfaitement le peripherique et pour lui la carte fonctionne correctement.
Cependant dans l'explorateur "Measurement and Automation" de labVIEW la carte n'apparait pas du tout.
(meme en actualisant l'explorateur plusieurs fois, la carte n'apparait pas).
Merci de bien vouloir m'aider.

National Instruments Corporate n'a malheureusement pas les ressources nécessaires pour répondre aux questions posées en français. Cependant, ces questions seront redirigées vers le bureau français, National Instruments France.
S'il vous plait contacter National Instruments France á Support Technique

Similar Messages

  • How can I get all the options of Field Point Explorer 3.0.2 in Measuremen​t and Automation Explorer 3.1?

    I am a student using LabVIEW and Compact Field Point to implement a
    senior design project in Electrical and Computer Engineering.  We
    have LabVIEW 7.1 and a cFP-2020 and additional modules.  We are
    trying to use the CTR-500 module to output a pulse train to drive a
    stepper motor.  We have found instructions online of how to do
    this, but they all use Field Point Explorer.  The instructions
    make use of options in Field Point Explorer that are not included in
    Measurement and Automation Explorer (the software included with the
    cFP).
    I have downloaded Field Point Explorer 3.0.2 and followed the
    directions.  Now, in LabVIEW, when I using the newly created .iak
    file, I get a dialogue asking to find the SubVI: 'FP Read (Float Array
    -IO).vi'.  Included with LabVIEW are subvis for FP Read, but not
    with the float array part.  So I figure I cannot use Field Point
    Explorer created .iaks with LabVIEW 7.1.  So how cannot I access
    the same options in Measurement and Automation that I was able to find
    in Field Point Explorer?
    Thanks

    Hi,
    FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
    FieldPoint systems are now setup in Measurement and Automation Explorer (MAX).  Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX.  The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
    Regards,
    Hal L.

  • Measuremen​t and automation explorer

    Hello,
    In my application, I want modify the offset and the sensitivity in scales of Measurement and automation explorer. Is it possible to do it in a VI and how?
    Because in my application I have a menu in which there is a calibration part. In this, I would like to group all parameters of my sensors (name, sensitivity and offset) and write automatically the offset and the sensitivity located in Measurement and Automation explorer without quit my application.
    Thanks for your help,Franc.

    There might be a way to do this with DAQmx, but DAQmx is not supported in LabVIEW Real-Time 7.0.
    Using Traditional NI-DAQ, you can only read custom scale information with Get Scale Information.vi. This VI is located under Data Acquisition >> Calibration and Configuration >> DAQ Channel Utilities.

  • Impossible de simuler avec measuremen​t and automation version 4.6

    Bonjour,
    quelqu'un saurait-i me dire pourquoi je ne vois pas apparaître "Periphériques NI-DAQmx" dans la l'arborescence "Périphériques et interfaces" de Measurement and automation explorer (4.6).
    Est-ce des modules de LabVIEW (7.1) que j'aurais hommis d'installer (comme des drivers DAQmx, ou autres), est-cer la version de Measurement and automation explorer qui me créé ce problème ???
    Je n'arrive pas à comprendre sachant que sur mon PC portable je n'ai aucun problème de ce type. (Il est vrai que sur mon portable, j'ai la version LabVIEW 8.5 et la version Measurement and automation explorer 4.3.
    Bonne journée à vous tous
    Edouard
    Résolu !
    Accéder à la solution.

    Bonjour, as-tu installé le driver DAQmx ? tu peux verifier sous MAX -> Logiciels -> NI-DAQmx
    Luc Desruelle | Voir mon profil | LabVIEW Code & blog
    Co-auteur livre LabVIEW : Programmation et applications
    CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
    CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW

  • Measuremen​t and Automation Explorer (MAX)

    where does Measurement and Automation Explorer (MAX) store virtual channel names

    They are in the ivi.ini file, typically located in the \VXIpnp\WinNT\niivi directory. Substitute your OS name for "WinNT".

  • Measuremen​t and Automation looses its way

    If I open Measurement and Automation while my Labview Application (executable) is running, Data Neighborhood comes up empty. Although my application continues to run OK. If I repoint (set active) MAX and relaunch my application I get multiple errors (can't find channels). Reinstalling Ni-Daq 6.9.1 did not solve the problem. Version - Labview 6i, MAX 2.1.

    Hello;
    That is happening because both the Labview application and MAX are trying to access the same dll, which is nidaq32.dll. As that dll is not a multithread dll, if more than one application tries to access the same resource, some errors may occur.
    Hope this helps.
    Filipe

  • I get an exception error when launching NI Measuremen​t and Automation Explorer

    The CniDMFuiProvider::Initialize plug-in caused an exception in the CmxExecutionThreadPool:oWorkNonUI function in the MAX process.  What is mean.  I cannot access NI MAX after I ignore this message, I will   have to kill the process.

    Greetings nintel
    This type of NI-MAX exception is associated with a corruption in some files of the NI-MAX and has been solved in the past by either removing a MAX database corruption or repairing the installation of NI-MAX. Have you tried going to Control Panel>>Programs and Features>>NI Software and repairing NI Measurement & Automation Explorer? Please let us know if any of those steps solve the problem. Have a nice day.
    Luis J.
    Applications Engineer
    National Instruments

  • Certificat numérique OPALEXE non reconnu par Acrobat

    Windows 8.1, Acrobat XI (pro ou reader) - le certificat de CERTEUROPE en USB / gemalto n'est pas reconnu
    - cette signature électronique est bien repérée sur Windows - testée sur Word,
    -  la clé électronique fonctionne parfaitement pour se connecter à la plateforme sécurisée OPALEXE,
    par contre, depuis quelque temps je ne peux plus l'utiliser pour signer électroniquement des documents pdf alors qu'elle était automatiquement reconnue auparavant
    le message d'erreur
    "Acrobat n'a trouvé aucune nouvelle ID numérique. Si votre ID numérique se trouve sur un jeton matériel, vérifiez que...;"

    Sauriez vous donc comment  activer le document PDF pour les signatures numériques ?
    Salut,
    Dans Acrobat X : menu Fichier : Enregistrer-sous : Fichier PDF Reader Extended : Activer les fonctions supplémentaires.

  • Carte graphique non reconnu par after effect

    Bonjour, j'aimerais connaitre la procédure afin de faire reconnaitre ma carte graphique AMD Radeon HD 6970M 2048 Mo par After Effect.

    National Instruments Corporate n'a malheureusement pas les ressources nécessaires pour répondre aux questions posées en français. Cependant, ces questions seront redirigées vers le bureau français, National Instruments France.
    S'il vous plait contacter National Instruments France á Support Technique

  • Chaine non reconnue par la fonction "Rechercher une expression"

    Bonjour,
    J'ai un problème avec la fonction "Rechercher une expression", elle ne reconnait pas la chaine que je recherche qui est "<\FT" et je n'arrive pas à comprendre pourquoi.
    J'ai testé avec un simple VI que je joins, la fonction "Remplacer une expression" fonctionne quand à elle très bien, je vous laisse en juger par vous même sur les images.
    C'est assez étonnant...
    Pièces jointes :
    RechExpr.jpg ‏18 KB
    RechExprDiag.jpg ‏36 KB

    L'exemple n'a pas marche.
    Cordialement,
    Simon D.
    Cordialement,
    Simon D.
    CLA | Certified LabVIEW Architect
    CTA | Certified TestStand Architect
    Pièces jointes :
    char.vi ‏8 KB

  • Iphone non reconnu par itune

    Bonjour, je viens d'acheter un iphone 4s d'occasion, je n'arrive pas à le synchroniser avec mon PC, itune ne le reconnait pas. Merci de votre aide

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Ipod Classic 160Go non reconnu par PC

    Bonjour,
    Depuis quelques jours mon Ipod Classic 160Go n'est plus reconnu que ce soit sur winsdows ou sur itunes.
    J'ai tout essayé.
    Je l'ai rechargé complètement, suivi toutes les instructions que l'assistance apple donnait.
    J'ai même racheté un cable usb et mon ipod n'est toujours pas reconnu.
    Si quelqu'un a une solution, je suis preneuse.
    Pour info, il fonctionne très bien en lecteur mp3 et en rechargement.

    Hello Grenolga,
    We would love to help you but this is an English based support forum, if possible please respond in English. If aren’t able to, here is an HP French support forum that can also help you.
    Please respond when you can. 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Ecran non reconnu par pc

    Bonjour,  Je viens de faire l'acquisition de matériels HP qui sont un PC p6-2464ef et un écran 2211x. Je rencontre un problème à la connexion de l'écran sur le PC. L'écran s'allume bien, un écran du statut du monitor s'affiche pour détecter la source après un scanning des sources et rien n'est  détecté aussi  bien aorès branchement soit en vga soit en dvi   et l'écran se met en veille. Pourriez-vous m'aider à résoudre ce problème pour que je puisse utiliser ces matériels rapidement. Je vous remercie par avance de votre aide

    Hello Grenolga,
    We would love to help you but this is an English based support forum, if possible please respond in English. If aren’t able to, here is an HP French support forum that can also help you.
    Please respond when you can. 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • IPhone 4S non reconnu par mon ordinateur

    Mon ordinateur ne reconnait pas mon iPhone 4S... Ce dernier ne s'affiche pas dans iTunes et ne se charge même pas ! Mon chargeur fonctionne parfaitement bien sur secteur, c'est celui d'origine... Merci à tou(te)s c(elles)eux qui m'apporteront leur aide !!!

    Il y a beaucoup de choses d'essayer ici: http://support.apple.com/kb/TS1369?viewlocale=fr_FR

  • Measurement and Automation explorer or the Instrument I/O Assistant is not installed correctly.

    I am having difficulties getting Labview to work with my NI card.  I have a PCI_6225 card running on a Win 7 64-bit install.  I had to download all of the drivers and installers from the NI site and during the Labview install, I recieve a prompt asking for my hardware drivers.  Since I only have the compressed hardware installer, Labview doesn't like what it sees and continues the installation of LABVIEW.  I then attempt to open an analog input channel through the Instrument I/O Assistant which displays the error seen in the image attached.  
    I know the hardware works because in the Measurement and Automation client, I am able to observe the analog input I hope to collect in LABVIEW.  
    Is there a fix to get LABVIEW working?  I have tried multple installs of LABVIEW and am on a administered computer through my University's IT people.  I have 'full admin' rights.  Thanks.
    Attachments:
    error.jpg ‏254 KB

    Hello jbaxter,
    When you download the Drivers from NI's website, make sure you unzip them (extract them) to a folder on your computer before you install them. If you use the NI Downloader it should prompt you to unzip and run the files after the download is complete. You need to either repair, or reinstall DAQmx and NI VISA. Make sure you download the latest versions of these first:
     http://search.ni.com/nisearch/app/main/p/bot/no/ap/global/lang/en/pg/1/sn/catnav:du,ssnav:sup/1//en/...
    Then go to Control Panel»Programs and Features»National Instruments Software and click Uninstall/Change then go to DAQmx and NI-VISA and click Repair. You can then point to folder that you downloaded from NI's website (make sure this is not a zip folder, but the folder that has been extracted). Or you could choose Remove, and then reinstall them both again. Also if you are using GPIB, reinstall or repair the NI-488.2 driver.
    Here are some relevant links:
    http://digital.ni.com/public.nsf/allkb/DC808866AF7D5C0986256FCE006E9BAB
    http://forums.ni.com/t5/LabVIEW/Again-I-O-Assistant-not-installed-correctly/td-p/1024807
    http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/quot-MAX-or-Instrument-I-O-Assistant-not-inst...
    http://forums.ni.com/t5/LabVIEW/Install-Instrument-I-O-Assistant/td-p/1471516
    Software Developer
    National Instruments

Maybe you are looking for