GPIB-USB-HS//how to use in VC++?

I have a GPIB-USB-HS,and want to use in VC++ with windows xp.
question: I do not fine that are .h /.dll/.lib file.and who can give me??
email;[email protected]
thanks

Hi again,
As you can see in the image included, I think I´m doing something wrong in the simulation.
First of all I have included the NI USB-6001 device, but an exclamation icon apeared --> ¿Is this correct?
Then I simulate with the "Test panel" an analog signal in the first channel "Dev1/ai0".
At least, I extract "DAQmx Global Channel" from this first signal (Dev1/ai0), and taken to a string visualizator.
I think It should be very simple to manage this variables... Would you mind to help me again?
Thank you.
Attachments:
Chanel1.PNG ‏43 KB

Similar Messages

Can I use a USB hub to connect to multiple USB ports from one GPIB-USB-HS?

I have one instrument which has a GPIB-USB-HS connected and the USB cable is connected to a USB hub. Can I have multiple PCs to connect using USB hub at their respective USB ports? If so, how many PCs can I connect using the USB cable?
I have downloaded the latest NI-VISA from the website.
Solved!
Go to Solution.

You would first need a hub that allows you to switch between multiple pc's and then only one pc at a time would be connected and in control.
When you buy this special type of hub, one of the specs is how many pc connections it has.

How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.

try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0

How to use multiple midi controllers with Mac book pro (2 usb)?

I have a newer macbook pro that has 2 USB ports, and a lightning port and a firewireport.
On stage I will be using the firewire port connected to a Presonus Firestudio mobile to use as the interface to the house mixer.
I will use 1 USB for my M-audio Axiom 61
I will use the other for my Yamaha WX-5 Wind synth
I'd like to be able to get the apogee midi foot controller to control the playback audio. For example I'll be using it to stay in a solo section, then step on it to move it forward ot the next section when I am done soloing
I'd also like to use some sort of midi switch to turn on vocal effects of the mic.
Anyway since I only have 2 USB ports, how should I connect the 3rd, or 4th USB midi controller?
Will a USB hub work to do this? If so, will I always have to remember to use the same controler in the same exact hub input to make sure everything maps the same?
I guess I'll also have to learn how to setup multiple controllers in Mainstage as well.
Thanks
Dan

Hi there,
is a question which many of us have spent ...
I think the obvious answer is that yes you can use a hub and connect everything. however ....
sincerely advise you to buy a good hub that is well feasible, the last thing you want on stage / rehearsal is one of midi controllers stop responding, or stay with hanged notes... etc., do not buy just because it is cheap it has to be stable and viable, some bring cable for connecting wall power just to not drain power from the USB port.
Other things to try is to distribute as much equipment for USB / Midi.
For example one of midi controllers connect via USB but not by Midi outside the Presonus Firestudio. Connecting Presonus Firestudio to a single USB port as it is a main equipment.
but it really is an issue that greatly limits the use of USB devices.
Try it and tell me how it went. Good luck
(sorry for my english i´m Portuguese)

When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

Use GPIB-USB-HS in place of HP Comm Card (82335)?

Recently had one of my engineers use an old computer, and found it is having hard drive issues. I got the old PC back up and running, but I think that this is a good time to try and upgrade the hardware/software.
Old Computer:
Running Windows 95
Using a HP Communications Card (GPIB) model 82335A
The HP card then connects to a HP 8751A Network Analyzer
This runs software called HP Instrument Basic (iBasic), and has several tests saved
New Computer that I want to upgrade
Basic Desktop PC running Windows 7 32 bit
I have a NI - GPIB-USB-HS cord, from a different testing machine, that I want to use to connect to the same analyzer
With the new computer and the NI cord, I can run the iBasic software, and the test loads, but errors when it runs.
In the code it gives the error message on the line that says "ON TIMEOUT Scode,3" then GOTO the LINE that prints the error
I have installed the drivers for the NI GPIB cord, and even tried installing/testing the Agilent library Suite.
I'm looking for any ideas that someone may have to point me in the right direction, since I am currently stuck.
Thanks

You really need to be talking to agilent about a GPIB controller (please don't call it a chord) to find one of their devices that is compatible with your old software. Agilent and NI GPIB functions are not compatible at the low level.You would be able to swap only if the code used the portable VISA functions.

HT1461 Using a G5. I've installed windows 7. However, no sound. My copy of Lion 10.7.4 is a download (I have an install usb). How do I install the service preferences for windows 7?

Using a G5 with Lion 10.7.4. Using boot camp have installed windows 7 in an equal partition and it appears to be running alright. Problem--no sound.
My Lion install was from a online download. Since then have made a bootable usb. How do I install the windows service preferences from Lion?

Not on a G5 because a G5 is a PPC machine and won't run anything past Leopard.

How to use usb flash drive

So i tried to use a usb flash drive to save a word document on my macbook, but i couldnt find the flash drive, or even where to find the usb port. can somebody tell me how to use a usb flash drive on macbooks?

The USB ports are on the left side.
Just plug in the drive, and it should show up on your desktop (or in the Finder - click the happy face icon in your dock). Drag and drop the files into the drive. Or, select the drive as the save location when you pick Save or Save As in Word.
When you're done, drag the drive's icon to the trash (it will change to an eject symbol), or click the little eject symbol next to it's icon in the Finder. You can then safely unplug the drive.

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Hi,
To access the MIDI ports you will need to call the Windows SDK. To send MIDI commands is relatively easy, here is an example that shows you how to send data to a MIDI controller or keyboard.
As far as input goes, this is the hard part. There are a series of functions that you need to call to open up the device, set some buffers and and possibly a callback to get notifications on the incoming data.
Reading MIDI data will not be an easy task, your best bet will be to implement this in a DLL and call that DLL in LabVIEW, there should be some code available o the web.
= "http://msdn.microsoft.com/library/default.asp?url=/library/en-us/multimed/htm/_win32_multimedia_... is a link to the Windows multimedia functions that you could use for MIDI input.
Let me know if you have any further questions.
Regards,
Juan Carlos
N.I.

How to use USB Y adapter with HDD 500GB V63700-A

Hi,
My external HDD V63700-A500GB has difficulty working in my USB2.0 4 port adapter.
I thought perhaps it needs more power going into it.
So I bought a USB-Y but I can not figure out how to use it.
It has 2 male USB connector wires and a very small narrow one which does not go into the thin wide socket of the above HDD.
Anybody uses these things to advise me how to?
...... thanx
.....nick

Thanx Joel,
definitely looks like the correct one but, can you give me a link on where to get it?
I keep googling for a "USB-Y cable for external hd" with no luck.
.........nick

How to use a USB-to-parallel adapter to communicate with my switch device?

My computer doesn't have a parallel port, so I must use the USB port and a USB-to-parallel adapter to communicate with my switch device. Unfortunately in WindowsXP printer configure that show USB001 Virtual printer for USB. How should I control my USB-to-Parallel converter to send the Pin1 and Pin3 high? How should I decide that I/O address in Labview (traditional LPT1 is 378AH) ?

Hi Kelvin,
I understand that you want to control pins on your serial port using LabVIEW. Since you are using Windows XP, only LabVIEW version 7.0 will be able to control the pins. The pins can be controlled by modifying the values of the access registers that windows associates with each pin. If you are using LabVIEW 7.0, then the VI's located on the Funtions >> Advanced >> Port I/O palette should help you assign values to the proper pins.
This information can also be found on another discussion forum thread located at the following url:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000438A0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Thanks for contacting NI, and I hope this helps.
Marcus G.
National Instruments

How to use phone as internet connection via usb

How do I use my iphone6 to access the web with a direct USB connection to my dell laptop.

Are you asking how to use the iPhone 6 as a hotspot for your laptop? If so, see this support document about Personal Hotspot. iOS: Understanding Personal Hotspot

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

QuestionJust purchased a USB Super Drive but unsure how to use it - o instructions provided apart from how to eject a cd. Each time I put in a cd it just ejects it again.

Just purchased a USB Super Drive but unsure how to use it - o instructions provided apart from how to eject a cd. Each time I put in a cd it just ejects it again.Can anyone help.

USB is rarely bootable under Mac OS X and PowerPC Macs. Get a Firewire Superdrive from http://www.macsales.com/ if your intent is to boot the machine. PPC, which is PowerPC, indicates the Mac predates 2006.

How to Use Home+End Key on new short usb apple keyboard on XP

How to Use Home+End Key on new short usb apple keyboard on XP
now i use macbook and new short apple keyboard.
it hasn't Home and End key. i try to use Fn + -> , Fn + <-
it cann't do that. How can i set the Fn + <- be Home key
and Fn + -> be End key like on my macbook keyboard
thank you for answer

Easy, no need to be harsh. I might not be a Level 9  Discussions user, but I’ve been an Apple Technician for more than a decade now. So believe me, I know what I’m talking about. Be it OS X Server or emptying the Trash. But even I come here from time to time to learn from others. Well, back to topic and being a little more specific:
The 'My Info' setting always belongs to the first iCloud account you add to an iOS device. In this account you create at least 1 contact, the one you will be using for 'My Info'. You then do the same on your other iOS device using NOT the same iCloud account, of course. You only need to enable contacts syncing in iCloud preferences for these primary accounts. From here on you can use differing 'My Info' on your 2 iOS devices without a problem.
But you may know that you can use more than one iCloud account at a time. Only the primary one will offer all iCloud options like Photostream. But what they all offer is contacts, calendars, etc. So if you intend (and I did) to share these 2 between your devices you can add them using a second iCloud account to both of your iOS devices. This makes it 3 accounts all in all. You could even go further and add another one just for 'Find my iPhone' if you like.
I would’ve used the built-in sharing of Calendar.app instead, but Contacts.app does not (yet) offer sharing contacts with others. That’s why I went with the third iCloud account as a secondary account to both iOS devices.
Apple of course recommends using just one Apple ID for everything to make it easier. But in some scenarios this just won’t cut it, which is even described in one of their support documents.
I hope that now you have an idea what I’ve done…
Good night
Björn
PS: It would be nice if people did not insist on being right. They too can sometimes learn something!

GPIB-USB-HS//how to use in VC++?

Similar Messages

Maybe you are looking for