GPIB User account error

GPIB ERROR:
I created a prgm in LV to control a 3561A signal Analyzer via GPIB. I was able to run the program in my account.
I copied the main VI along with all the subVIs to another user account (Administator Account) in the same computer. There i could not run the program. The error msg in the attachment always comes.
I have installed the GPIB drivers in this Administator Account.
What could be the problem?
Nghtcwrlr
********************Kudos are alwayzz Welcome !! ******************
Attachments:
GPIB User change error.JPG ‏8 KB

Hi davidek,
Sorry for the late reply. Yes its possible to run the MAX from the other account. It has been installed to use for all users.
Administators have full control and other users have the permission to read and execute.
Message Edited by Nghtcrwlr on 08-24-2009 02:40 AM
Nghtcwrlr
********************Kudos are alwayzz Welcome !! ******************

Similar Messages

Redwood User Account error on Job

Hi All,
We currently had all our BWP jobs fail with the following error:
JCS-00503: OS account SYSJCS does not exist or is disabled on BRSAPPRDBWPV2
JCS-00315: job must run under OS equivalent of Oracle account SYSJCS
We run our oracle database on a Windows 2003 environment and also our Redwood/SAP servers are on a Windows 2003 server.
The job itself users "USER" account.
The only way we could get the jobs to start was by restarting the BWP Redwood services, and this worked fine.
Also want to state the we had the following issue at the sametime which was flagged up to us in "messages":
resubmit.update_job:
ORA-04061: existing state of package body "SYSJCS.CHAIN" has been invalidated
ORA-04065: not executed, altered or dropped package body "SYSJCS.CHAIN"
ORA-06508: PL/SQL: could not find program unit being called: "SYSJCS.CHAIN"
All our BWP process chains are executed via the RUN BW CHAIN script, which is copied and renamed for the process chain.
We have tried to replicate the error in our dev environment but it worked fine. RFC points nothing at all.. Any help would be much appreciated. OSS note has been raised...
Thank You
Jazz

Hi Jazz,
The SYSJCS.CHAIN package is not used for BI Process Chains, only for CPS Chains. So the invalidation must have come from another source.
When this error occurs, as long as there are sessions started before the package has been re-validated (state reinitialized), you can continue to run into this error until all sessions have been restarted. The extend of the error depends on the package being reinitialized (how often it is used and the dependencies it has) and the session that needs to call it.
I think the error may already have been there before you did the chain import and just happened to surface shortly after the import.
Regarding your other questions:
1. RSI_IMPORT_BW_CHAINS or RSI_IMPORT_BW_CHAIN_DEFINITIONS:
the second one is only needed if you want to display the process chain definitions in the web interface before the chain is even running in CPS (in the job monitor you only see the processes that have started); if you do not use that, RSI_IMPORT_BW_CHAINS is enough
2. How would you go about maintaining BW process chains in Redwood (CPS)?
This is a question that every customer runs into at some point. First, you currently can not change a process chain definition in the BI system from CPS. Then there are cases where you probably want to leave the process chain structure intact (typically on the deepest level: drop index, do some work, recreate indexes). And there are other cases where it can be useful to bring some logic to CPS (typically on all levels where you have process chain within process chain in BI, ie. on all but the deepest levels).
For this last case, which is of course the most interesting for CPS, it can be very valuable to recreate the BI "meta-chain" structure in a CPS job chain.
So here you replace the BI "meta-chain" calling several BI process chains by a Cronacle job chain still calling some of the BI process chains (the ones on the deepest levels).
Now you can add all the CPS extras for error handling, retries, cross system dependencies, (external) events, alerting, etc. etc. on each and every point in the CPS job chain, so you get a lot more information, intervention and recovery points on your BI process than you would when running the entire thing in one big BI Process Chain (triggered from CPS or not does not matter).
Typically the customer's decision here mainly depends on the advantages that can be achieved, especially if there are service levels to be met on the reports that need to be delivered from BI and these deadlines tend to get tighter by the month.
By reducing the total runtime of the process or reducing the number of errors that occur or if they occur, the amount of work to fix it, you can save a lot of time, and thus money.
Hope this helps.
Regards,
Anton.

Cannot add/ change user account - error with Microsoft-Windows-User Profiles Service

Hello
A few days ago my computer went wierd.
I cannot update windows because I get no results when I use "Windows Search"
My metro UI doesnt work properly. I cannot use it.
Somebody said that it could be that my User Account could be corrupted.
I tried to create I new one, but I could do the first steps, because the computer doesnt respond when I click "Change my account" in controlpanel.
I get errorlogs like this:
Loggnamn: Application
Källa: Microsoft-Windows-User Profiles Service
Datum: 2015-04-29 12:03:16
Händelse-ID: 1542
Aktivitetskategori:Ingen
Nivå: Fel
Nyckelord:
Användare: SYSTEM
Dator: Baddarn
Beskrivning:
Det går inte att läsa in registerfilen för klasser.
INFORMATION - The system cannot find the file specified.
Händelsens XML-data:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-User Profiles Service" Guid="{89B1E9F0-5AFF-44A6-9B44-0A07A7CE5845}" />
<EventID>1542</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-04-29T10:03:16.571099200Z" />
<EventRecordID>91382</EventRecordID>
<Correlation />
<Execution ProcessID="1128" ThreadID="2524" />
<Channel>Application</Channel>
<Computer>Baddarn</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Error">The system cannot find the file specified.
</Data>
</EventData>
</Event>
What can I do?

Hi Intesabra,
Have you made any modifications to the machine before the issue?
First of all ,I would suggest you to update the machine manually.
Control Panel\All Control Panel Items\Windows Update\Check for updates.
I also suggest you to perform a full scan with the antivirus software to eliminate the virus issue considering this issue is a little wierd. We can do this in safe mode to improve the scanning quality.
Run "services.msc" to check the status of "User Profiles Service" and ensure it is running.
Run "dism /online /cleanup-image /restorehealth" or "sfc /scannow" to check the health of the whole system files.
Considering this issue occurred recently, we can perform a system restore to recover the machine to a previous point.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Any new user creation gets: unable to log into user account error

Sort of reposting from http://discussions.apple.com/thread.jspa?threadID=2795507&tstart=0 as that initial question was answered.
Anyway, running an xserve managing all network accounts (only local accounts are a local admin on each system). DNS checks out and all current users can log in fine. However, it seems any new user I create keeps getting this wonderfully ambiguous error. I've tried Guest (but figured it probably interfered with the Guest Account), Student (but thought it might be interfering with a group of the same name), Guest Student, and Temp User.

Just making sure, you have selected the home location, and then actually pressed the "Create home" button? I have missed it few times and then wondered why it is not working. Then check the home folder location that it is actually there and created successfully.
Yeah, and then hit Save!
Message was edited by: VincensoXFIN

User account errors and some work-arounds

1. Migrate multiple users, but second on no set up correctly
I had this when I tried to migrate one user then a second as a subsequent migration. Home directory was created but no user was created in Sys Prefs. Sadly, the user name was created in the system somewhere and I could not re-use.
Workaround. Migrate all users together.
2. Library being duplicated for every user.
My library file is 25Gb, and this is being duplicated for every user. I thought this was a shared resource under Tiger ....? My disk space is taking a hammering.
Workaround: Unknown
3. Delete a user and try to re-add
If you delete a user, and all files etc., you would expect to be able to re-add. Nope. The name remains persistent in some system file(s) somewhere, even after a re-boot.
Workaround: Fresh install. Ugh!
4. Drag-and-drop not working in Finder/Desktop
OK, got drag and drop working on MBP with 10.5.1 and G5 Quad under 10.5.1.
It appears that the second and on users when performing a migrate are not set up properly.
If drag-and-drop isn't working, go into Sys Prefs, Accounts, and create a Group. Add the non-functioning account to the group (I did both).
I ran Repair Permissions (lots of errors that SUID would not fix, to do with frameworks and identities, so I left alone. Many other permissions errors fixed).
Logged out .... btw, intermittent bug where you cannot log out a second account that's running as it doesn't take the name or password. You have to switch user and log it out that way.
Log back to the user with the drag and drop issue. Shutdown and then start back up.
When you log back in, drag and drop should work..... and keep on working whether you switch user etc.
Also, if you now remove the Group from Sys Prefs./Accounts, drag and drop will still continue to work. (I haven't tried a restart to see whether it is persistent though.)
If anyone has better workarounds or - preferably - fixes, please let me know.
Thank you.

Mary,
You do not tell us the method of authentication you have implemented.
If you are having NTIntegrated authentication, you should check if the eliteadm workflow user record contains her nt logon credentials?
You can flag that user as deleted, but before you do, make sure it does not contain any id that you need to use later (such as email or nt account details, if either is used for user identification purposes.)
RE stalling workitem - when you view the details of the stalled record in the 'Stalled workitems' list, you should be able to also read an error message giving you a clue of what went wrong. Either double click on the item to see details in dialog or expand all columns in the console to read details.
Good luck,
Sanna

Problems with remote control and user accounts - error 1759?

We're running:
-XP Pro SP2 clients with Zen SP1 IR3a agent, 4.91 SP2 Netware client.
-We are NOT running Middle Tier.
-Novell servers are running Netware 6.5 SP7, E-directory 8.7.3.10b or 8.8.
-Zen server is also SP1 IR3a.
We have no problem using remote control on workstation objects. We are having intermittent issues with remote controlling user objects. When the issue occurs, we receive the following error, "Error 1759: The selected user is not logged in on any workstations" even though the user is in fact logged in. After some more research, it appears that the "networkAddress" attribute of the user object is blank so we feel that this is the root cause. My question is what would cause the networkAddress attribute to randomly not update? For instance we had a user (verified his login) who we could not remote via the user object (workstation object worked). We checked his networkAddress attribute and found that it was empty. User rebooted and logged in again and his networkAddress attribute populated, and then we could remote control him via the user object. Now this isn't always the case after a reboot. There doesn't appear to be any pattern to when the networkAddress attribute does or does not update. In fact, this particular user has a laptop so he boots it up fresh every morning yet he was not showing a network address when he logged in initially today.
We've followed the troubleshooting steps in Novell Documentation without any success. Is there anything else that we might be missing, especially with respect to getting the networkAddress attribute to update? We ran a DSreport on that attribute and found about 500 out of a total of 1500 users had no networkAddress. Some of those are sure to be legitimate but that number is much too high for the number of people that should be in the office.
I've read some older threads on the subject but none of them really provide a firm solution. Also most of the older threads reference Middle Tier which we are not using.
Thanks in advance.

> 4.91 SP2 Netware client.
You could try this TID:
"A user will no longer have an entry in their "Network Address" attribute
even though they are logged into the eDirectory Tree."
http://www.novell.com/support/viewCo...1262&sliceId=1
"Resolution"
"This was fixed in the 4.91 SP3 client. NWFS.SYS was modified so that it
will check the monitor connection on a reconnect and if it is not connected
close the connection and try and get a new monitor connection to the tree.
Prior to the 4.91 SP3 client, the solution is to have the user login again
so that it issues the NDS Finish Login request again that will populate
Network Address again."
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.

Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

Microsoft office is installed on two user accounts. One account works fine, the other account keeps getting an error message. Why wont it work on both accounts?

Microsoft office is installed on two user accounts. My husbands account works fine, but my account keeps getting an error message every time I try to open up a new document. Why wont it work on both accounts? How do I fix this?

Hi Aubs,
Without knowing what the error is, there's not much help we can provide....
Cheers,
GB

How can I fix the "This is not a test user account, please create a new account in the sandbox environment" error?

Hi there everyone,
Recently I tried to make an in-app purchase, I'm not sure whether the app is relevant or not but it was for Tapped Out, however, after trying to make the purchase I received an error message saying "Sign-In Required, tap continue to sign in to check for downloads [Environment: Sandbox]" so I followed the instructions and was then presented with another error message saying "This is not a test user account, please create a new account in the sandbox environment. [Environment: Sandbox]"
I have been doing a lot of research online trying to find a solution and so far nothing has worked for me, I have also been passing emails backwards and forwards between an Apple Customer Support colleague and are yet to find a working solution.
Here are a few pieces of information.
1. I am running iOS 6.1.3 on a 4th Gen iPod, it's relatively new, I got it for Christmas.
2. My iPod is not, and never has been Jail Broken.
3. I do not have a test account and have never tried to make my own apps.
4. I have tried signing out of my Apple ID, resetting my iPod's settings and signing in again.
5. I have tried resetting my Apple ID password
6. I have tried restoring my iPod to factory settings.
If anyone has another suggestion for something I could try it would be greatly appreciated, thanks.

Yep, I've been reading through other threads on lots of different sites over the last few hours and I can't seem to find a working solution, even though some seem to have worked for other people.
Most of them hadn't been updated in a while so I made my own post to see if anyone has anything new.

Can not log into server computer with any accounts - "You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."

I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
ACL found but not expected on Users
Repaired "Users"
ACL found but not expected on Users/.localized
Repaired "Users/.localized"
ACL found but not expected on Users/Shared
Repaired "Users/shared"
ACL found but not expected on Users/Shared/.localized
Repaired "Users/Shared/.localized"
Permissions repair complete.
But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?

Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

User Accounts and ORA-01722: invalid number error

Hello,
I have been using Express for a month or so now but have very limited knowledge of how it works.
My Problem:
I have a listing screen for user records which creates records in table QAS_USERS.
When I add a record it saves the data OK and put the record in the list.
When I click on the record in the list it takes me to the edit screen and I can change
the details and it works OK and all the changes get saved to the database.
On the data entry screen I have a list of the User Groups so I can select what group
the user will be in, usual details in username, fullname, email address, password etc..
I then added a routine to create a USER in the APEX Manage USERs.
It creates the record in my table QAS_USERS and it creates a APEX User Account with
the correct details and the record is displayed in the list.
So far so good.
Now the errors start:
1. When I look at the User Account in Administration -> Manage Application Express Users
most of the details have been added but the User Group does not get allocated.
2. The record I created in QAS_USERS appears in the list on my listing screen but when
I click on the Edit Icon on the left of the list I get the following error appear
when the screen changes to the edit screen:
ORA-01722: invalid number
Unable to fetch row error
QAS_USER Table:
ID NUMBER
CREATED_ON DATE
CREATED_BY VARCHAR2(10)
CHANGED_ON DATE
CHANGED_BY VARCHAR2(10)
ACTIVE VARCHAR2(3)
USERNAME VARCHAR2(10)
FULLNAME VARCHAR2(30)
TEAMLEADER VARCHAR2(3)
TEAMLEADER_ID NUMBER
LAB NUMBER
DIRECTOR VARCHAR2(3)
ACTION_MANAGER VARCHAR2(3)
SDM VARCHAR2(3)
GM VARCHAR2(3)
EMAIL_ADDRESS VARCHAR2(50)
PASSWORD VARCHAR2(12)
SDTL VARCHAR2(3)
FIRSTNAME VARCHAR2(30)
LASTNAME VARCHAR2(30)
GROUP_ID NUMBER
USER_ID VARCHAR2(20)
Process Script to create the Express User Account:
Declare
group_id NUMBER;
BEGIN
group_id := APEX_UTIL.get_group_id (:P15_GROUP_ID);
APEX_UTIL.CREATE_USER (
P_USER_NAME => :P15_USERNAME,
P_FIRST_NAME => :P15_FIRSTNAME,
P_LAST_NAME => :P15_LASTNAME,
P_WEB_PASSWORD => :P15_PASSWORD,
P_EMAIL_ADDRESS => :P15_EMAIL_ADDRESS,
p_developer_privs => 'ADMIN',
p_group_ids => group_id);
END;
If any one has any ideas I would be very grateful.
Regards,
Simon.

Hi,
It could be that this is because you are using SYSDATE which contains the time as a fraction rather than TRUNC(SYSDATE) which just contains the current time. It could be that your working_dates_between raises this error.
However, your formula is far more complicated than it needs to be.
Firstly, you want to look at the date window ADD_MONTHS(TRUNC(SYSDATE), -6) to TRUNC(SYSDATE). Then you want to look at the portion of the absence that falls in the date window. This is GREATEST(Absence Attendance.Actual Start Date, ADD_MONTHS(TRUNC(SYSDATE), -6)) to LEAST(NVL(Absence Attendance."Actual End Date",TRUNC(SYSDATE)), TRUNC(SYSDATE)). You may need to add 1 to the absence end date because this is the last day of their absence rather than the date they return. It depends how you calculate the days between the start and end
date of the absence. You can create calculations for the start and end date of the absences within the 6 months time window. Create calculation AbsenceStart as
GREATEST(Absence Attendance.Actual Start Date, ADD_MONTHS(TRUNC(SYSDATE), -6))
and AbsenceEnd as
LEAST(NVL(Absence Attendance."Actual End Date",TRUNC(SYSDATE)), TRUNC(SYSDATE))
Then you need to only pick up absence that a part of the absence in your 6 month date window. You can use a condition in the workbook or a condition in a case statement to do this. You then need to calculate the difference between these dates and SUM all the values.
SUM(CASE WHEN AbsenceEnd >= AbsenceStart THEN WORKING_DAYS_BETWEEN(AbsenceStart, AbsenceEnd) END)
That's it. Not so complicated after all.
Rod West

ORA-20160: Encountered an error while getting the ORACLE user account.

when users trying to apply for the leave . Once they apply for the leave and the respective manager approves it.
They get an notification mail with the error message The changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator. ORA-06512: at "APPS.ALR_PER_ABSENCE__800_53447_IAR", line 3 ORA-04088: error during execution of trigger 'APPS.ALR_PER_ABSENCE__800_53447_IAR'
EBS : 12.1.2
Database : 11.2.0

We are also facing the same issue , with the following error.
The Changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request, Contact your system administrator. ORA-06512: at “ APPS.ALR_PAY_ELEMENT_801_53338_IAR”, line 1 ORA-04088: error during execution of the trigger ‘APPS.ALR_PAY_ELEMENT_801_53338_IAR’
Dear Hussein ,
As per your suggestion , if we disable the trigger , does it workflow goes ahead without any problems ?
By Disabling the trigger , what would be the impact ? I mean does we are going to loose the data that was supposed to be updated the trigger.
And basically please educate me . what is the use of this APPS.ALR_PAY_ELEMENT_801_53338_IAR’ ?
Regards
Raghu

"Unable to check revocation" error while checking CDP from non-domain user account

Hi!
I use 3-tier PKI infrastructure:
Stand-alone offline Root CA: RootCA;
Stand-alone offline Intermediate subordinate CA: SubCA;
Enterprise CA: EntSubCA.
In certificate we have three CDP point for CRL check:
ldap:///, http:// and file://
I have Windows 2008 R2 server joined to domain.
I use command certutil –verify –urlfetch <filename.cer> >check.txt for revocation checking of certificate.
When I use domain user account for revocation checking, all OK.
I have access to any CDP and all fine.
But when i use local server user account, I haven't access to ldap:/// and process failed although all other links is OK.
My question is "why check fail with non-domain user accout while other CDP point succesfully verifed"?
Here is the logfile from local user:
Issuer:
CN=EntSubCA
DC=DED
DC=ROOT
Subject:
CN=servername.domain_name
Cert Serial Number: 5a896145000300006ee2
dwFlags = CA_VERIFY_FLAGS_ALLOW_UNTRUSTED_ROOT (0x1)
dwFlags = CA_VERIFY_FLAGS_IGNORE_OFFLINE (0x2)
dwFlags = CA_VERIFY_FLAGS_FULL_CHAIN_REVOCATION (0x8)
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN (0x20000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
ChainContext.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
ChainContext.dwRevocationFreshnessTime: 5 Days, 23 Hours, 15 Minutes, 48 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
SimpleChain.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
SimpleChain.dwRevocationFreshnessTime: 5 Days, 23 Hours, 15 Minutes, 48 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=1000040
Issuer: CN=EntSubCA, DC=DED, DC=ROOT
NotBefore: 05.02.2015 20:03
NotAfter: 05.02.2016 20:03
Subject: CN=servername.domain_name
Serial: 5a896145000300006ee2
SubjectAltName: DNS Name=servername.domain_name
Template: Machine
70 e4 6b 16 05 a1 62 e3 6d 24 96 ff 44 74 ee a2 3e ce df 18
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
Element.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
Element.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
---------------- Certificate AIA ----------------
Failed "AIA" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crt
Verified "Certificate (0)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crt
---------------- Certificate CDP ----------------
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?certificateRevocationList?base?objectClass=cRLDistributionPoint
Verified "Base CRL (018d)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[1.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[1.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[1.0.2] http://webserver/crl/EntSubCA.crl
Verified "Base CRL (018d)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[2.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[2.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[2.0.2] http://webserver/crl/EntSubCA.crl
---------------- Base CRL CDP ----------------
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
OK "Base CRL (018d)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[1.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[1.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[1.0.2] http://webserver/crl/EntSubCA.crl
OK "Base CRL (018d)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[2.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[2.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[2.0.2] http://webserver/crl/EntSubCA.crl
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 018d:
Issuer: CN=EntSubCA, DC=DED, DC=ROOT
33 af 4d be 0e 35 45 94 bc 8b 3f d9 c1 60 e7 0c c4 83 17 b6
Application[0] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[1] = 1.3.6.1.5.5.7.3.1 Server Authentication
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=SubCA
NotBefore: 13.11.2014 19:12
NotAfter: 13.11.2017 19:22
Subject: CN=EntSubCA, DC=DED, DC=ROOT
Serial: 6109015b000100000008
Template: SubCA
9b 04 17 9f c5 fe 52 ca a5 58 49 6c c6 18 fa db 13 b3 92 9e
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Failed "AIA" Time: 0
Error retrieving URL: The network path was not found. 0x80070035 (WIN32: 53)
file://\\sub_ca\CertEnroll\sub_ca_SubCA(1).crt
Verified "Certificate (0)" Time: 0
[1.0] file://\\ca\crl\SubCA.crt
Verified "Certificate (0)" Time: 4
[2.0] http://webserver/crl/SubCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (32)" Time: 0
[0.0] file://\\ca\crl\SubCA.crl
Verified "Base CRL (32)" Time: 4
[1.0] http://webserver/crl/SubCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 32:
Issuer: CN=SubCA
8d a9 9d 51 65 a3 8e 77 02 22 40 57 62 70 e8 f6 c5 2e 60 1e
CertContext[0][2]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=RootCA
NotBefore: 28.05.2008 12:09
NotAfter: 28.05.2058 12:19
Subject: CN=SubCA
Serial: 616bd19f000100000004
Template: SubCA
06 d2 47 e7 dc 8f a7 97 a2 b8 c3 92 03 19 24 0c 47 45 22 14
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] file://\\ca\crl\RootCA.crt
Verified "Certificate (0)" Time: 4
[1.0] http://webserver/crl/RootCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (1c)" Time: 4
[0.0] http://webserver/crl/RootCA.crl
Verified "Base CRL (1c)" Time: 0
[1.0] file://\\ca\crl\RootCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 1c:
Issuer: CN=RootCA
dc 98 2f 8d 16 9c 64 6e b2 74 89 95 9a 6c 1b 77 fd 58 63 fb
CertContext[0][3]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=RootCA
NotBefore: 27.05.2008 16:10
NotAfter: 27.05.2110 16:20
Subject: CN=RootCA
Serial: 258de6fbd3bbab92460530e9e9f10536
5d e4 56 38 13 0a 52 aa 66 51 25 61 19 33 c9 d7 a2 c7 dd 38
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] file://\\ca\crl\RootCA.crt
Verified "Certificate (0)" Time: 4
[1.0] http://webserver/crl/RootCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (1c)" Time: 0
[0.0] file://\\ca\crl\RootCA.crl
Verified "Base CRL (1c)" Time: 4
[1.0] http://webserver/crl/RootCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 1c:
Issuer: CN=RootCA
dc 98 2f 8d 16 9c 64 6e b2 74 89 95 9a 6c 1b 77 fd 58 63 fb
Issuance[0] = 1.2.700.113556.1.4.7000.233.28688.7.167403.1102261.1593578.2302197.1
Exclude leaf cert:
5b 8d 96 39 f8 a3 6f af f3 89 bc 8d 78 e2 da 53 21 b8 ff aa
Full chain:
ca 99 30 47 9b ad ab ce 97 cc 70 80 a5 4e 11 b3 1a 83 98 78
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.5.5.7.3.2 Client Authentication
1.3.6.1.5.5.7.3.1 Server Authentication
ERROR: Verifying leaf certificate revocation status returned The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613)
CertUtil: The revocation function was unable to check revocation because the revocation server was offline.
CertUtil: -verify command completed successfully.

What you have discovered is the reason to *not* use LDAP URLs for CDP and AIA extensions in your PKI. To access those URLs, the account must access to the URLs. In your output, it is quite clear that the local account does not have necessary permissions
(you also use FILE URLs for publication, which again is not recommended).
The best practice is to use a single URL for the CDP extension. It should be an HTTP URL that is hosted on a highly available (internally and externally accessible) Web cluster.
For the AIA extension, it should contain two URLs: one for the CA certificate - again to an internally and externally accessible, highly available Web cluster and one for the OCSP service - also
an internally and externally accessible, highly available Web cluster.
the other issue is that the root CA is *not* trusted when run by a non-domain account. How are you adding the trusted root CA. It is recommended to do this by running
certutil -dspublish -f RootCA.crt.
This will ensure that the computer account trusts the root CA. In your output, the root CA certificate is not trusted.
Brian

Error while getting the ORACLE user account for your concurrent request

Hi ,
When I am submitting the Concurrent Program from OAF page Iam getting
Error
Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
When we will face this error.
Not able to submit the Request
Krishna

Krishna
Try like this
public int submitCPRequest(String shipmentId) {
System.out.println("into submitCPRequest");
try {
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
OADBTransaction transaction = am.getOADBTransaction();
Connection conn = transaction.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(conn);
cr.setDeferred();
String applnName = new String("XXAPL"); //Application that contains the concurrent program
System.out.println("ApplName"+ applnName);
String cpName = new String("SHIP_REQ"); //Concurrent program name
System.out.println("Concc Name"+ cpName);
// String cpDesc = new String("Shipping Request"); // concurrent Program description
// Pass the Arguments using vector
// Here i have added my parameter headerId to the vector and passed the
//vector to the concurrent program
Vector cpArgs = new Vector();
cpArgs.addElement(shipmentId);
System.out.println("Args"+ cpArgs);
After this it is going into exception
// Calling the Concurrent Program
int requestId = cr.submitRequest(applnName, cpName, null, null, false, cpArgs);
System.out.println("Req Id"+ requestId);
tx.commit();
return requestId;
catch (SetDeferredException e)
throw new OAException("SetDeferredException " + e.getMessage(),OAException.ERROR);
catch (RequestSubmissionException e) {
System.out.println("Into Exception");
OAException oe = new OAException(e.getMessage());
oe.setApplicationModule(this);
throw oe;
}Thanks
AJ

Error message when trying to create a user account in WGM

In WGM, everytime I try to create a new account and save, this message appears:
*Got unexpected error*
+Error of type eDSAuthNoAuthServerFound (-14102)+
+on line 2112 of /SourceCache/WorkgroupManager/+
WorkgroupManager-319.2.2/Plugins/UserAccounts/
UserAdvancedPluginView.mm
What is that?
I tried to create the user accounts in Server Preferences/users but I can not login.
It seems that I get a lot trouble with leopard server. Should I reinstall it or go back Tiger?
Thanks

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

GPIB User account error

Similar Messages

Maybe you are looking for